T-Series Press Brake
Closed Solicitation Posted
This opportunity was awarded. See the award notice from .
- Solicitation number
- W911S225U0829
- Agency
-
MICC Fort Drum
Mission and Installation Contracting Command, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 333912 Air and Gas Compressor Manufacturing
- Place of performance
- 4525 Camp Hale Rd Fort Drum, NY 13602 13602
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
The Department of the Army Materiel Command Mission and Installation Contracting Command at Fort Drum is seeking to procure a T-Series Press Brake, a precision hydraulic brake with 110 tons of bending force and specific technical specifications. The solicitation is categorized under NAICS 333912 (Air and Gas Compressor Manufacturing) and PSC 3442 (Hydraulic and Pneumatic Presses), with a focus on acquiring a machine with synchronized precision and advanced manufacturing capabilities. The press brake features include a European design, an ESTUN E300P CNC Controller, and specialized hydraulic and electrical systems designed for manufacturing precision. The solicitation was posted on May 28, 2025, with proposals due by June 4, 2025, indicating a relatively short response window for potential bidders. While specific evaluation criteria are not explicitly detailed in the notice, the technical specifications suggest a rigorous assessment of manufacturing precision, equipment capabilities, and compliance with defined technical requirements.
The contract opportunity is designated as a Total Small Business set-aside, meaning only small businesses are eligible to compete for this procurement. The place of performance is located at 4525 Camp Hale Rd, Fort Drum, NY 13602, with the equipment weighing approximately 15,400 lbs and featuring comprehensive technical specifications such as +/- 0.001" ram repeatability and parallelism. The press brake comes with standard tooling including a goose neck punch and a 7-way bottom die, and includes features like a precision back gauge, European-style tool clamps, and safety mechanisms including side door guards and a rear safety gate. While no specific award value is mentioned, the detailed technical requirements suggest this is a specialized procurement with potentially significant equipment value. The solicitation indicates the machine will be used for precise metal forming operations, with capabilities including programming in angle or absolute modes and supporting up to 25 steps per program.
Notice text
Standard Features ?Synchronized Precision Hydraulic Brake with110 Tons of Bending Force and 10? Bed ?Ram repeatability and parallelism of +/- 0.001??98.8? between housings (measured between the side plates of frame) ?Ram pre-machine dto use European tooling (other tooling systems can be priced on request) ?Precision ground die rail with hold down bolts ?Piranha X and Manual R Back Gauge system ?Sick Light Curtain System ?European Precision Style Manual Tool Clamps ?Front Sheet Supports ?Open Height (with die rail without clamps) 14.96? ?Shut Height 10.24? ?Stroke 4.72?Throat Depth 12.6? ?Work Height 35? ?Rapid Approach 236 ipm ?Press Speed 19 ipm ?Return Speed 165 ipm ?ESTUN E300P CNC Controller ?Motor Rating = 10 H.P. ?Estimated Weight = 15,400 lbs Structural features ?European design ?Full steel plate welded structure ?Stress relieved ?Machined in one set up to assure parallelism and verticality of all mounting surfaces ?Safety side door guards and rear safety gate ?Movable front support arms Ram/Torque Tube ?Single guide/gib system ensures precise ram movement ?Parallel tolerance of Y +/- 0.001? ?Robust Link from Torque Tube to Ram ?Robust Design for the Torque Tube to Frame Connection ?European Precision clamping style for upper tool holder Hydraulic system ?Hydraulic system from SYI ?Overload protection with tonnage control manual set ?Sight glass on tank for easy oil level checks Back gauge system ?Precision back gauge +/- 0.002 repeatability ?X axis is driven by digital AC Servo-motors with ball screw and linear ways ?Back gauge is a heavy design for1eachmechanical strength and rigidity ?Fingers are designed to increase the working range of back gauge Electrical system ?Electrical components are sourced to ensure reliability, longevity and common off the shelf replacements ? Standard Foot Pedestal with Emergency Stop Button CNC controller ?Estun E300P Touch Screen Controller ?Program in Angle or Absolute ?Up to 25 steps per program Standard tooling and configuration ?Upper too l clamping: European Precision Clamps ?Lower 4 way die rail with standard US tang ?Tooling supplied with machine is a basic starter set ?Supplied with a Goose Neck Punch ?Supplied with a 7 Way Bottom Die
Notice history
| Notice | Type | Posted |
|---|---|---|
| T-Series Press Brake | Award Notice | |
| This notice | Solicitation |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Recuperator Press Modification Replacement | ACC Warren | No set-aside | |
| Deburring Machine | MICC Fort Drum | Total Small Business |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity