Synchro/Resolver STD, Prog

 

This is a NOTICE OF INTENT to procure Calibration Equipment. This requirement is advertised as SOLE SOURCE.  Naval Air Warfare Center - Aircraft Division (NAWC-AD) is issuing Request for Quote No. N00421-18-Q-0473 as a Request for Proposal for the procurement of Calibration Standards ancillary equipment. The equipment supports Aviation Fleet Intermediate Calibration Activities, Fleet Training Activities, and Aviation Navy Calibration Laboratories to support Aviation Organizational and Intermediate level maintenance assets for AIR- 4.1.12 Metrology and Calibration Program.

The Government intends to award a Firm-Fixed Price contract, on a sole source basis, to North Atlantic Industries, Inc. (CAGE Code 0VGU1), 110 Wilber Place, Bohemia, NY 11716-2416, for this procurement. The statutory authority permitting other than Full and Open Competition is USC 2304(c)(1), as implemented by FAR 6.302-1 only one responsible source and no other supplies or services will satisfy agency requirements. The procedures of FAR Part 12 and 13.5 will be utilized for this commercial acquisition.

The requirement will include the following:  

1) P/N 5300-S3412A SYNCHRO/RESOLVER STD, (Qty 25); includes: 

To include the following:

a)    Reference input:

a.     Operating frequency range:

                                                                  i.    Synchro Mode:  60Hz to 1 kHz

                                                                 ii.    Resolver Mode:  360 Hz to 1 kHz

b.     Voltage Range:

                                                                  i.    60Hz to 1 kHz

                                                                 ii.    2 to 115 V

c.     Input impedance:  200 kohms minimum

d.     Reference output: 

e.     Voltage range vs frequency:

                                                                  i.    30 Hz to 1 kHz

                                                                 ii.    2 to 115 V

f.      Output impedance:  <0.25 ohms

g.     Voltage accuracy:  +/-3% of setting 

h.     Voltage resolution:  3 digits

i.      Output Current:

                                                                  i.    2 to 26 V

                                                                 ii.    100mA maximum

                                                                iii.    >26 to 115 V

                                                                iv.    25 mA maximum  

j.      DC offset:  5 mV Maximum

k.     Phase shift range:  0 to +/-180° to 0.001° resolution

l.      Phase shift accuracy: 

                                                                  i.    60 to 1 Khz

                                                                 ii.    +/-0.5°

b)    Outputs isolated:

a.     Voltage accuracy:  2% of setting

b.     Voltage resolution: 1% of setting minimum

c.     DC offset" 5 mV maximum
d.     Voltage range line to line:  1 to 90 V

e.     Angular accuracy vs F: 

                                                                  i.    60 Hz - +/-0.000833°

                                                                 ii.    400Hz - +/-0.0005°- +/-0.0000833°

                                                                iii.    400Hz - +/-0.00055°

                                                                iv.    400Hz - +/-0.00055°

                                                                 v.    800Hz - +/-0.00055°

f.      Other frequencies and V combinations:

                                                                  i.     +/-0.011°- +/-0.000833°

g.     Angular resolution:  0.0001° (0.36 arc-sec)

h.     Output drive capability: 

i.      2 to 26 V- 4VA max limited to 330 mA max

j.      >26 to 90 V- 4VA max limited to 33 mA max

k.     Output impedance (max):

                                                                  i.     60 to 1kHz -<0.25 ohms

l.      Radius (sinusoidal accuracy):  +/-0.005% typical

c)     Dynamic angular modulation

a.     Continuous (CW or CCW):  to 100,000° (278rps)

b.     Cyclical:  sine triangle or square wave to 1 kHz or between preset angle

c.     Incremental:  successive equal angles on command

d)    Other:

a.     Front panel control:  Push buttons: rotary control for manual angular positioning

b.     Remote control:  IEEE-488

c.     Dimensions:  19"w x 3.5"h x 18 7/16" d bench or racking

d.     Power:  115/220 VAC +/-10%, 47 to 440 Hz, 115 VA

e)    Line cord

f)      115V line fuse

g)    230V line fuse

h)       Rack mounting handles and hardware

Place of Delivery: The items above must be delivered to the following address:  COMMANDER, NAVAIR Calibration Standards, MCAS, Attn:  Lou Cerrillo, (UIC N48535) Building 612, Bay 9, Beaufort, SC 29904.

This notice is not a request for competitive proposals. All responsible interested parties may submit a capability statement by 3:00 p.m. on 05 July 2018 via e-mail to jeffrey.t.smith6@navy.mil, which will be considered solely for the purposes of determining whether to conduct a competitive procurement. The Government shall not reimburse interested sources for any information provided nor return any information provided. Offerors must ensure that their firm is registered with the System for Award Management (SAM).  For further information, please refer to https://www.sam.gov.