Sub-Sea Cable, Data Conductor, Power Conductor, and Drain Wire
Closed Solicitation Posted
This opportunity was awarded. See its 2 award notices in the notice history.
- Solicitation number
- N6660426Q0007
- Agency
-
Naval Sea Systems Command
Department of the Navy, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 335921 Fiber Optic Cable Manufacturing
- PSC
- 6145 Wire And Cable, Electrical
- Place of performance
- Newport, Rhode Island 02841, United States
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
The Department of the Navy Naval Sea Systems Command is seeking quotations for sub-sea cable assemblies featuring data conductors, power conductors, and drain wire through Request for Quote (RFQ) N6660426Q0007. The procurement requires ten integrated cable segments, each measuring 225 feet (±10%), with CAT 6 data conductors, four 18AWG power conductors, and one drain wire, all rated for 6,000-meter depth operations. Key technical requirements include polyurethane outer jackets not exceeding 16.5mm in diameter, a minimum bend radius of 160mm, integrated strength members supporting a 350kg working load with 1,000kg minimum break strength, over-molded connectors with 13-pin male and female pigtails, and Birns Aquamate bulkhead connectors. The government will make award decisions based on lowest price, technically acceptable (LPTA) criteria, with detailed specifications required to demonstrate technical acceptability. Quotations must be submitted by 11:00 a.m. EST on November 19, 2025, with delivery to Newport, Rhode Island.
This solicitation is designated as a 100% Small Business Set-Aside under NAICS code 335921 (Fiber Optic Cable Manufacturing), with a small business size standard of 1,000 employees, meaning only certified small businesses are eligible to bid. No incumbent contractors or award value are identified in the solicitation materials. The requirement encompasses a single lot of ten cable segments with comprehensive testing mandates, including conductivity and insulation tests on all cables, safe working load testing on at least one cable, and pressure testing to 6,000 meters depth on all units. The cables must demonstrate operational capability in saltwater environments across temperatures from -2°C to +40°C, withstand three years of sunlight exposure, and support five deployment and retrieval cycles. Performance will occur at Newport, Rhode Island, with final cable lengths to be determined upon contract award.
Notice text
2 versions
Update #2 · Latest ·
PLEASE READ THIS ENTIRE NOTICE CAREFULLY AS IT CONSTITUES THE ONLY NOTICE THAT WILL BE ISSUED.
This is a combined synopsis and solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6-Streamlined Procedures for Evaluation and Solicitation for Commercial Items, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested, and a written solicitation will not be issued. The Request for Quote (RFQ) number is N6660426Q0007.
This requirement is being solicited as 100% Small Business Set-Aside. The North American Industry Classification System (NAICS) code for this acquisition is 335921. The Small Business Size Standard is 1,000 employees. The Product Supply Code (PSC) is 6145. This requirement is for Cable, Data Conductor, 18AWG Power Conductors and Drain Wire (minimum specifications below) CLIN structure breakdown:
CLIN 0001 Sub-Sea Cable, Data Conductor, Power Conductor, and Drain Wire
SEE UPDATED SPECIFICATIONS ATTACHED AS OF 05 NOVEMBER 2025 AT 1430.
Depth Rating: All components shall have depth rating of 6000 meters or greater.
Manufactured integrated, cable segments shall contain the following
- QTY 10, Cables
- QTY 8, CAT 6 data conductor
- QTY 4, 18AWG power conductors
- QTY 1 drain wire
- An integrated strength member, which when over molded, can support a 350 kg working load and 1000kg minimum break strength
- An over mold which is no larger than 5 inches tall, 4.3 inches wide at the top, and 2.2 inches at the bottom (trapezoidal shape) on each end of the cable
- A threaded connection in the end of the over mold for attachment
- A 13 pin male pigtail broken out from one end of the mold over and a 13 pin female connector broken out from the opposite over mold
13 pin male and female bulkhead connectors that mate with cable connectors
Cap and screw retainers for all connections
Cable lengths: 225 ft +/- 10%. Final length will be provided upon award
Number of cables lengths: 10 cables
Qty 1 LOT
Naval Undersea Warfare Center Division, Newport (NUWCDIVNPT) intends to purchase, on a Firm Fixed Price (FFP) basis. Required delivery is F.O.B. DestinationNewport, RI 02841.
Offeror shall complete and submit Federal Acquisition Regulations (FAR) Provision 52.204-24 ‘Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment’ (AUG 2020), which is included as an attachment to the solicitation or be certified in Certs and Reps on SAM.
The Offeror shall include shipping charges, if applicable and priced within the CLINs, and specify best delivery lead times in its quote.
Incorporated provisions and clauses are those in effect through the most current Federal Acquisition Circular (FAC). The following provisions and clauses apply to this solicitation:
FAR 52.204-19, Incorporation by Reference of Representations and Certifications;
FAR 52.204-23, “Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab.”;
FAR 52.204-24, Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment;
FAR 52.204-25, “Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment”;
FAR 52.209-10, “Prohibition on Contracting with Inverted Domestic Corporations.”;
FAR 52.209-11, “Representation by Corporations Regarding Delinquent Tax Liability or Felony under any Federal Law.”;
FAR 52.212-1, “Instructions to Offerors – Commercial Items.”;
FAR 52.212-2, “Evaluation – Commercial Items.”;
FAR 52.212-3 (ALT 1), “Offeror Representations and Certifications – Commercial Items.”;
FAR 52.212-4, “Contract Terms and Conditions – Commercial Items.";
FAR 52.212-5, “Contract Terms and Conditions Required to Implement Statutes or Executive Orders – Commercial Items.”;
DFARS 252.204-7008, “Compliance with Safeguarding Covered Defense Information Controls.”;
DFARS 252.204-7009, “Limitations on the Use or Disclosure of Third-Party Contractor Reported Cyber Incident Information.”;
DFARS 252.204-7015, “Notice of Authorized Disclosure of Information for Litigation Support.”;
DFARS 252.204-7019, “NOTICE OF NIST SP 800-171 DOD ASSESSMENT REQUIREMENTS”;
DFARS 252.204-7020, “NIST SP 800-171 DOD ASSESSMENT REQUIREMENTS”;
DFARS 252.213-7000, “Notice to Prospective Suppliers on Use of Supplier Performance Risk System in Past Performance Evaluations.”
DFARS 252.215-7013, “Supplies and Services Provided by Nontraditional Defense Contractors.”;
DFARS 252.225-7031, “Secondary Arab Boycott of Israel.”;
DFARS 252.246-7008, “Sources of Electronic Parts.”;
Additional terms and conditions:
In accordance with DFARS Clause 252.211-7003, the contractor shall provide a unique item identifier (UID) for all delivered items for which the Government’s unit acquisition cost is $5,000.00 or more. If UID applies, payment will be via Wide Area Workflow (WAWF). If UID does not apply, and if there are no surcharges, the Government’s preferred payment method is via credit card.
Full text of incorporated FAR/DFARS clauses and provisions may be accessed electronically at https://acquisition.gov/far/.
Contractors must be registered in the System for Award Management (SAM) (https://www.sam.gov/portal/public/SAM) prior to award. Instructions for registration are available on the website.
The Government intends to award a single FFP Purchase Order to the eligible and responsible offeror on a Lowest Price, Technically Acceptable basis.
In order to be determined technically acceptable the offeror shall:
(A) Quote the minimum specifications specified in their required quantities. The offeror shall submit detailed specs with quote;
Offerors shall be advised that if after award the items delivered are determined not to be in new condition and/or are determined to be delivered from outside the US, the Government has the right to terminate for cause with the Contractor liable to the Government for any and all rights and remedies provided by the law including excess re-procurement costs.
Offers must be received no later than 11:00 a.m. (EST) on Monday, 10 November 2025. Offers received after this date and time may not be considered for award. For information on this acquisition, contact Jennifer Vatousiou at jennifer.m.vatousiou.civ@us.navy.mil
Update #1 ·
PLEASE READ THIS ENTIRE NOTICE CAREFULLY AS IT CONSTITUES THE ONLY NOTICE THAT WILL BE ISSUED.
This is a combined synopsis and solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6-Streamlined Procedures for Evaluation and Solicitation for Commercial Items, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested, and a written solicitation will not be issued. The Request for Quote (RFQ) number is N6660426Q0007.
This requirement is being solicited as 100% Small Business Set-Aside. The North American Industry Classification System (NAICS) code for this acquisition is 335921. The Small Business Size Standard is 1,000 employees. The Product Supply Code (PSC) is 6145. This requirement is for Cable, Data Conductor, 18AWG Power Conductors and Drain Wire (minimum specifications below) CLIN structure breakdown:
CLIN 0001 Sub-Sea Cable, Data Conductor, Power Conductor, and Drain Wire
Depth Rating: All components shall have depth rating of 6000 meters or greater.
Manufactured integrated, cable segments shall contain the following
- QTY 10, Cables
- QTY 8, CAT 6 data conductor
- QTY 4, 18AWG power conductors
- QTY 1 drain wire
- An integrated strength member, which when over molded, can support a 350 kg working load and 1000kg minimum break strength
- An over mold which is no larger than 5 inches tall, 4.3 inches wide at the top, and 2.2 inches at the bottom (trapezoidal shape) on each end of the cable
- A threaded connection in the end of the over mold for attachment
- A 13 pin male pigtail broken out from one end of the mold over and a 13 pin female connector broken out from the opposite over mold
13 pin male and female bulkhead connectors that mate with cable connectors
Cap and screw retainers for all connections
Cable lengths: 225 ft +/- 10%. Final length will be provided upon award
Number of cables lengths: 10 cables
Qty 1 LOT
Naval Undersea Warfare Center Division, Newport (NUWCDIVNPT) intends to purchase, on a Firm Fixed Price (FFP) basis. Required delivery is F.O.B. DestinationNewport, RI 02841.
Offeror shall complete and submit Federal Acquisition Regulations (FAR) Provision 52.204-24 ‘Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment’ (AUG 2020), which is included as an attachment to the solicitation or be certified in Certs and Reps on SAM.
The Offeror shall include shipping charges, if applicable and priced within the CLINs, and specify best delivery lead times in its quote.
Incorporated provisions and clauses are those in effect through the most current Federal Acquisition Circular (FAC). The following provisions and clauses apply to this solicitation:
FAR 52.204-19, Incorporation by Reference of Representations and Certifications;
FAR 52.204-23, “Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab.”;
FAR 52.204-24, Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment;
FAR 52.204-25, “Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment”;
FAR 52.209-10, “Prohibition on Contracting with Inverted Domestic Corporations.”;
FAR 52.209-11, “Representation by Corporations Regarding Delinquent Tax Liability or Felony under any Federal Law.”;
FAR 52.212-1, “Instructions to Offerors – Commercial Items.”;
FAR 52.212-2, “Evaluation – Commercial Items.”;
FAR 52.212-3 (ALT 1), “Offeror Representations and Certifications – Commercial Items.”;
FAR 52.212-4, “Contract Terms and Conditions – Commercial Items.";
FAR 52.212-5, “Contract Terms and Conditions Required to Implement Statutes or Executive Orders – Commercial Items.”;
DFARS 252.204-7008, “Compliance with Safeguarding Covered Defense Information Controls.”;
DFARS 252.204-7009, “Limitations on the Use or Disclosure of Third-Party Contractor Reported Cyber Incident Information.”;
DFARS 252.204-7015, “Notice of Authorized Disclosure of Information for Litigation Support.”;
DFARS 252.204-7019, “NOTICE OF NIST SP 800-171 DOD ASSESSMENT REQUIREMENTS”;
DFARS 252.204-7020, “NIST SP 800-171 DOD ASSESSMENT REQUIREMENTS”;
DFARS 252.213-7000, “Notice to Prospective Suppliers on Use of Supplier Performance Risk System in Past Performance Evaluations.”
DFARS 252.215-7013, “Supplies and Services Provided by Nontraditional Defense Contractors.”;
DFARS 252.225-7031, “Secondary Arab Boycott of Israel.”;
DFARS 252.246-7008, “Sources of Electronic Parts.”;
Additional terms and conditions:
In accordance with DFARS Clause 252.211-7003, the contractor shall provide a unique item identifier (UID) for all delivered items for which the Government’s unit acquisition cost is $5,000.00 or more. If UID applies, payment will be via Wide Area Workflow (WAWF). If UID does not apply, and if there are no surcharges, the Government’s preferred payment method is via credit card.
Full text of incorporated FAR/DFARS clauses and provisions may be accessed electronically at https://acquisition.gov/far/.
Contractors must be registered in the System for Award Management (SAM) (https://www.sam.gov/portal/public/SAM) prior to award. Instructions for registration are available on the website.
The Government intends to award a single FFP Purchase Order to the eligible and responsible offeror on a Lowest Price, Technically Acceptable basis.
In order to be determined technically acceptable the offeror shall:
(A) Quote the minimum specifications specified in their required quantities. The offeror shall submit detailed specs with quote;
Offerors shall be advised that if after award the items delivered are determined not to be in new condition and/or are determined to be delivered from outside the US, the Government has the right to terminate for cause with the Contractor liable to the Government for any and all rights and remedies provided by the law including excess re-procurement costs.
Offers must be received no later than 11:00 a.m. (EST) on Monday, 10 November 2025. Offers received after this date and time may not be considered for award. For information on this acquisition, contact Jennifer Vatousiou at jennifer.m.vatousiou.civ@us.navy.mil
Files
| File | Type | Posted |
|---|---|---|
| I.G.ii. Specifications Updated.pdf | ||
| II.D.ii. Attachment RFQ Summary N6660426Q0007.pdf |
Notice history
| Notice | Type | Posted |
|---|---|---|
| Sub-Sea Cable, Data Conductor, Power Conductor, and Drain Wire | Award Notice | |
| Sub-Sea Cable, Data Conductor, Power Conductor, and Drain Wire | Award Notice | |
| This notice | Solicitation |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Data Cable | Naval Sea Systems Command | No set-aside | |
| Cable assembly, spec | Naval Supply Systems Command | No set-aside | |
| Cable assembly, spec- and similar replacement parts | Naval Supply Systems Command | No set-aside | |
| Cable assembly, spec | Naval Supply Systems Command | No set-aside | |
| Cable assembly, spec | Naval Supply Systems Command | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity