Sole source – evaluation / repair of keysight technologies INC. Equipment

N00164-22-Q-0096 – SOLE SOURCE – EVALUATION / REPAIR OF KEYSIGHT TECHNOLOGIES INC.EQUIPMENT - FSG J066 - NAICS 811219

ISSUE DATE 25 APR 2022 – CLOSING DATE 28 APR 2022 – 12:00 PM Eastern Time

ITEM DESCRIPTION-  Naval Surface Warfare Center (NSWC) Crane has a requirement for Evaluation / Repair of:

Line# 1 - Nomen: Network Analyzer, PN: E8362B, SN: MY43020110, Failure – won’t boot up properly, Evaluation

Line# 3 - Nomen: Network Analyzer, PN: E8362B, SN: MY43021355, Failure - port 2 intermittent, Evaluation

Line# 5 - Nomen: Network Analyzer, PN: N5222A, SN: SG51420117, Failure - fails receiver cal in operator check, Evaluation

Line# 7 - Nomen: Network Analyzer, PN: N5222A, SN: SG51420113, Failure - fails receiver cal in operator check, Evaluation

Line# 9 - Nomen: ECal Module, PN: N4691B, SN: SG46180328, Failure - fails characterization, Evaluation

Line# 11 - Nomen: ECal Module, PN: N4691B, SN: SG46180284, Failure - fails verification, Evaluation

Line# 13 - Nomen: Signal Generator, PN: E8257D, SN: SG53400301, Failure - fails carrier wave frequency, Standard Repair

Line# 14 - Nomen: Signal Analyzer, PN: N9030A, SN: SG57151004, Failure - fails noise sideband, Standard Repair

Line# 15 - Nomen: Signal Generator, PN: E4438C, SN: MY45092765, Failure - fails carrier wave frequency and amplitude modulation depth, Standard Repair

Line# 16 - Nomen: Signal Generator, PN: E4438C, SN: MY42083264, Failure - fails amplitude modulation depth, Standard Repair

Line# 0002, 0004, 0006, 0008, 0010 & 0012 are options for repairs of line #s 0001, 0003, 0005, 0007, 0009, and 0011.

SOLE SOURCE PROCUREMENT- The proposed contract action is for the supplies or services for which the Government intends to solicit and negotiate with one source, Keysight Technologies, Inc., 1900 Garden of the Gods Rd., Colorado Springs, CO 80907-3423, CAGE CODE 7ZX, under the authority of FAR 13.106-1. This is being sole sourced because Items Peculiarity to Manufacturer.  Keysight Technologies, Inc. is the Original Equipment Manufacturer (OEM) and does not authorize 3rd party repairs. Keysight Technologies Inc. is considered the only responsible source possessing sufficient requisite knowledge, engineering expertise, and technical data to calibrate and repair to the OEM specific.   All responsible sources may submit a capability statement, which shall be considered by the agency. However, a determination by the Government not to compete with this proposed contract based upon responses to this solicitation is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement.

Contractors must be properly registered in the System for Award Management (SAM). Offerors may obtain information on SAM registration and annual confirmation requirements by calling 866-606-8220 or via the internet at https://sam.gov.

This solicitation is being issued pursuant to the procedures at FAR Part 13.  Synopsis exception FAR 5.202(a)(13) applies and Solicitation Number N00164-22-Q-0096 is hereby issued as an attachment hereto. 

Contract Opportunities on https://sam.gov/ has officially replaced FBO.gov

All changes to the requirement that occur prior to the closing date will be posted to Contract Opportunities on https://sam.gov/.  It is the responsibility of interested vendors to monitor https://sam.gov/ for any amendments, which may be issued to this solicitation. 

For changes made after the closing date, only those offerors that provide a quote will be provided any changes/amendments and considered for future discussions and/or award.

Offers shall be e-mailed to kathy.j.davidson.civ@us.navy.mil.    All required information must be received on or before 12 PM EASTERN TIME, 28 APR 2022.