Procument and construction of Spray booth and booth bench.

NASA's National Aeronautics and Space Administration Shared Services Center (NASA/NSSC) is procuring and constructing spray booth and booth bench equipment for use at NASA's Goddard Space Flight Center. The procurement encompasses two spray booths: a main enclosed dry filter booth measuring 18 feet wide by 10 feet high by 20 feet long with semi-downdraft design and LED lighting, and a smaller open-face bench booth measuring 4 feet wide by 4 feet high by 3 feet long with cross-draft design. The contractor must provide complete installation services including all supervision, assembly, labor, electrical wiring, lifting devices, and equipment training at the GSFC facility in Greenbelt, Maryland. The Government intends to evaluate this requirement under commercial item procedures per FAR Part 12 and Part 13, and interested organizations may submit capabilities and qualifications in writing to McKenzie Hanson, Procurement Specialist, by 3:00 p.m. Central Standard Time on April 13, 2026, to demonstrate whether the procurement should be conducted on a competitive basis. The due date for submissions is April 13, 2026, with a posted date of April 7, 2026.

This solicitation is designated as an 8(a) Sole Source contract, with FINISHING SYSTEMS INC of York, Pennsylvania identified as the sole source provider determined capable of performing the requirement. The Government has not disclosed a specific award value or budget range for this procurement. The contract will involve installation of two distinct spray booth systems with the main booth featuring a 24-inch mixed flow fan delivering 3600 cubic feet per minute exhaust capacity and operating at 100 feet per minute air velocity, while the bench booth requires 1600 cubic feet per minute exhaust capacity. Performance will be located at NASA Goddard Space Flight Center in Building 5, Room E062 in Greenbelt, Maryland, with the bench booth requiring early installation to enable production operations. The NAICS Code assigned to this procurement is 327910 (Abrasive Product Manufacturing), and the primary point of contact for inquiries is McKenzie M. Hanson at McKenzie.M.Hanson@nasa.gov.