Ion Nitride Spindles DWG 11583062

Ion Nitride Services of MMI Spindle per drawing 11583062 for the 155mm Cannon
M776.
Estimated quantity of 250 with two option quantities of 250 and 200 for a total of 700.
DD Form 2345 is required.
Estimated 40 to 80 spindles to be completed per month. Quote must include a turnaround time per lot size.
Simplified Past Performance Evaluation will be a criteria for award, an evaluation of both price and past performance.
FOB is Destination- All return shipping cost must be included in contractor proposal.
Drawing will be provided upon release of solicitation.
*****Estimated issue date of the solicitation: November 30, 2015.****
The proposed contract is a Small Business set aside under NAICS Code 332811 - In order to be eligible for award, the successful offeror's System for Award Management (SAM) Registration must be active and include representations and certifications.
This solicitation will be issued electronically, therefore hardcopies will not be provided,
as will any amendments thereto. Because of this, the Government is under no obligation and is in fact unable to maintain a bidder's mailing list. It is therefore incumbent upon any interested parties to periodically access the above Internet address in order to obtain any amendments that may be issued. Failure to obtain any said amendments and to respond to them prior to the date and time set for receipt of offers may render your offer nonresponsive and result in the rejection of same.
This solicitation incorporates a Technical Data Package (TDP) that cannot be provided via the Internet. Vendors who need this TDP in order to prepare an offer are instructed to request same by submission of an e-mail to: Christine.i.campbell.civ@mail.mil. Any said requests should contain the following information: CAGE Code (if available), Company Name, Point of Contact, Street Address, City, State, Zip Code, Telephone number. A TDP will be provided after the solicitation has been released. The solicitation document contains information that has been designated as quote mark Military Critical Technical Data. Only businesses that have been certified by the Department of Defense, United States/Canada Joint Certification Office, and have a valid requirement may have a copy of the solicitation document and technical data. All requests for these documents must include a certified copy of DD Form 2345, Military Critical Technical Data Agreement. To obtain certification, contact Defense Logistics Information Service (DLIS) at 800.352.3572 or http://www.logisticsinformationservice.dla.mil. Requests for technical data from foreign sources or representatives (other than Canada) will not be considered.
.

Ion Nitride Services of MMI Spindle per drawing 11583062 for the 155mm Cannon
M776.
Estimated quantity of 250 with two option quantities of 250 and 200 for a total of 700.
DD Form 2345 is required.
Estimated 40 to 80 spindles to be completed per month. Quote must include a turnaround time per lot size.
Simplified Past Performance Evaluation will be a criteria for award, an evaluation of both price and past performance.
FOB is Destination- All return shipping cost must be included in contractor proposal.
Drawing will be provided upon release of solicitation.
*****Estimated issue date of the solicitation: November 30, 2015.****
The proposed contract is a Small Business set aside under NAICS Code 332811 - In order to be eligible for award, the successful offeror's System for Award Management (SAM) Registration must be active and include representations and certifications.
This solicitation will be issued electronically, therefore hardcopies will not be provided,
as will any amendments thereto. Because of this, the Government is under no obligation and is in fact unable to maintain a bidder's mailing list. It is therefore incumbent upon any interested parties to periodically access the above Internet address in order to obtain any amendments that may be issued. Failure to obtain any said amendments and to respond to them prior to the date and time set for receipt of offers may render your offer nonresponsive and result in the rejection of same.
This solicitation incorporates a Technical Data Package (TDP) that cannot be provided via the Internet. Vendors who need this TDP in order to prepare an offer are instructed to request same by submission of an e-mail to: Christine.i.campbell.civ@mail.mil. Any said requests should contain the following information: CAGE Code (if available), Company Name, Point of Contact, Street Address, City, State, Zip Code, Telephone number. A TDP will be provided after the solicitation has been released. The solicitation document contains information that has been designated as quote mark Military Critical Technical Data. Only businesses that have been certified by the Department of Defense, United States/Canada Joint Certification Office, and have a valid requirement may have a copy of the solicitation document and technical data. All requests for these documents must include a certified copy of DD Form 2345, Military Critical Technical Data Agreement. To obtain certification, contact Defense Logistics Information Service (DLIS) at 800.352.3572 or http://www.logisticsinformationservice.dla.mil. Requests for technical data from foreign sources or representatives (other than Canada) will not be considered.

Ion Nitride Services of MMI Spindle per drawing 11583062 for the 155mm Cannon
M776.
Estimated quantity of 250 with two option quantities of 250 and 200 for a total of 700.
DD Form 2345 is required.
Estimated 40 to 80 spindles to be completed per month. Quote must include a turnaround time per lot size.
Simplified Past Performance Evaluation will be a criteria for award, an evaluation of both price and past performance.
FOB is Destination- All return shipping cost must be included in contractor proposal.
Drawing will be provided upon release of solicitation.
*****Estimated issue date of the solicitation: November 30, 2015.****
The proposed contract is a Small Business set aside under NAICS Code 332811 - In order to be eligible for award, the successful offeror's System for Award Management (SAM) Registration must be active and include representations and certifications.
This solicitation will be issued electronically, therefore hardcopies will not be provided,
as will any amendments thereto. Because of this, the Government is under no obligation and is in fact unable to maintain a bidder's mailing list. It is therefore incumbent upon any interested parties to periodically access the above Internet address in order to obtain any amendments that may be issued. Failure to obtain any said amendments and to respond to them prior to the date and time set for receipt of offers may render your offer nonresponsive and result in the rejection of same.
This solicitation incorporates a Technical Data Package (TDP) that cannot be provided via the Internet. Vendors who need this TDP in order to prepare an offer are instructed to request same by submission of an e-mail to: Christine.i.campbell.civ@mail.mil. Any said requests should contain the following information: CAGE Code (if available), Company Name, Point of Contact, Street Address, City, State, Zip Code, Telephone number. A TDP will be provided after the solicitation has been released. The solicitation document contains information that has been designated as quote mark Military Critical Technical Data. Only businesses that have been certified by the Department of Defense, United States/Canada Joint Certification Office, and have a valid requirement may have a copy of the solicitation document and technical data. All requests for these documents must include a certified copy of DD Form 2345, Military Critical Technical Data Agreement. To obtain certification, contact Defense Logistics Information Service (DLIS) at 800.352.3572 or http://www.logisticsinformationservice.dla.mil. Requests for technical data from foreign sources or representatives (other than Canada) will not be considered.
.

Ion Nitride Services of MMI Spindle per drawing 11583062 for the 155mm Cannon
M776.
Estimated quantity of 250 with two option quantities of 250 and 200 for a total of 700.
DD Form 2345 is required.
Estimated 40 to 80 spindles to be completed per month. Quote must include a turnaround time per lot size.
Simplified Past Performance Evaluation will be a criteria for award, an evaluation of both price and past performance.
FOB is Destination- All return shipping cost must be included in contractor proposal.
Drawing will be provided upon release of solicitation.
*****Estimated issue date of the solicitation: November 30, 2015.****
The proposed contract is a Small Business set aside under NAICS Code 332811 - In order to be eligible for award, the successful offeror's System for Award Management (SAM) Registration must be active and include representations and certifications.
This solicitation will be issued electronically, therefore hardcopies will not be provided,
as will any amendments thereto. Because of this, the Government is under no obligation and is in fact unable to maintain a bidder's mailing list. It is therefore incumbent upon any interested parties to periodically access the above Internet address in order to obtain any amendments that may be issued. Failure to obtain any said amendments and to respond to them prior to the date and time set for receipt of offers may render your offer nonresponsive and result in the rejection of same.
This solicitation incorporates a Technical Data Package (TDP) that cannot be provided via the Internet. Vendors who need this TDP in order to prepare an offer are instructed to request same by submission of an e-mail to: Christine.i.campbell.civ@mail.mil. Any said requests should contain the following information: CAGE Code (if available), Company Name, Point of Contact, Street Address, City, State, Zip Code, Telephone number. A TDP will be provided after the solicitation has been released. The solicitation document contains information that has been designated as quote mark Military Critical Technical Data. Only businesses that have been certified by the Department of Defense, United States/Canada Joint Certification Office, and have a valid requirement may have a copy of the solicitation document and technical data. All requests for these documents must include a certified copy of DD Form 2345, Military Critical Technical Data Agreement. To obtain certification, contact Defense Logistics Information Service (DLIS) at 800.352.3572 or http://www.logisticsinformationservice.dla.mil. Requests for technical data from foreign sources or representatives (other than Canada) will not be considered.

Added: Nov 18, 2015 4:41 pm.