EHP roller sources sought notice

This notice is to extend the closing date of this Request for Information (RFI) from Friday, 16 February 2018 to Thursday, 22 February 2018 at 17:00 Eastern Time. Additionally, this announcement also posts all responses to questions received from this RFI. Please see the attached package titled, Q & A Set 1 - EHP Roller. .

Added: Feb 16, 2018 10:15 am This notice is to extend the closing date of this Request for Information (RFI) from Friday, 16 February 2018 to Thursday, 22 February 2018 at 17:00 Eastern Time.  Additionally, this announcement also posts all responses to questions received from this RFI.  Please see the attached package titled, Q&A Set 1 - EHP Roller. 

Explosive Hazard Pre-Detonation (EHP) Roller
PRODUCT DESCRIPTION: The Explosive Hazard Pre-Detonation (EHP) Roller design will provide for forward mounted variable standoff for the Medium Mine Protected Vehicle (MMPV) Type II platform. The EHP Roller, with an On-Arm Wire Neutralization System (WNS), is a full width explosive hazard roller capability that consists of two bank assemblies, each having six wheel stations and two wire neutralization blade stations. The EHP Roller capabilities shall counter the full spectrum of conventional and asymmetric explosive hazards including surface-laid, buried and concealed landmines, IED, Explosively Formed Penetrators, Unexploded Ordnance, battlefield munitions and booby traps to include associated trigger mechanisms. The EHP Roller will have the capability to neutralize/detonate a broad spectrum of explosive hazards while on the move. Additionally, it will clear routes, destroy volatile hazards, proof lanes of explosive hazards and trigger mechanisms, neutralize/detonate and mitigate unpredictable hazards.
THE REQUIREMENT: Army Contracting Command-Warren intends to solicit for 344 each EHP Rollers, 5 each First Article Test (FAT) assets, and 1 each System Support Package (SSP). The applicable North American Industry Classification System (NAICS) code assigned to this procurement is 336992.

OBJECTIVE: The objective of this market survey is to identify potential sources that are capable of producing EHP Roller. The planned ordering requirements are as follows:

FY 18 - 72
FY 19 - 48
FY 20 - 72
FY 21 - 83
FY 22 - 69

This is a draft Request for Proposal (RFP) to gain further insight to industry interest. Please submit any questions in email to the following: chelsea.v.papke.civ@mail.mil

.

Added: Dec 01, 2015 4:01 pm Modified: Dec 19, 2017 3:53 pmTrack Changes Explosive Hazard Pre-Detonation (EHP) Roller

PRODUCT DESCRIPTION: The Explosive Hazard Pre-Detonation (EHP) Roller design will provide for forward mounted variable standoff for the Medium Mine Protected Vehicle (MMPV) Type II platform. The EHP Roller, with an On-Arm Wire Neutralization System (WNS), is a full width explosive hazard roller capability that consists of two bank assemblies, each having six wheel stations and two wire neutralization blade stations. The EHP Roller capabilities shall counter the full spectrum of conventional and asymmetric explosive hazards including surface-laid, buried and concealed landmines, IED, Explosively Formed Penetrators, Unexploded Ordnance, battlefield munitions and booby traps to include associated trigger mechanisms. The EHP Roller will have the capability to neutralize/detonate a broad spectrum of explosive hazards while on the move. Additionally, it will clear routes, destroy volatile hazards, proof lanes of explosive hazards and trigger mechanisms, neutralize/detonate and mitigate unpredictable hazards.

THE REQUIREMENT: Army Contracting Command-Warren intends to solicit for 344 each EHP Rollers, 5 each First Article Test (FAT) assets, and 1 each System Support Package (SSP). The applicable North American Industry Classification System (NAICS) code assigned to this procurement is 336992.

OBJECTIVE: The objective of this market survey is to identify potential sources that are capable of producing EHP Roller. The planned ordering requirements are as follows:

FY 18 - 72
FY 19 - 48
FY 20 - 72
FY 21 - 83
FY 22 - 69

This is a draft Request for Proposal (RFP) to gain further insight to industry interest. Please submit any questions in email to the following: chelsea.v.papke.civ@mail.mil

Market Survey
Explosive Hazard Pre-Detonation (EHP)
Roller with On Arm Wire Neutralization System (WNS)
PRODUCT DESCRIPTION: The EHP Roller with On Arm WNS (EHP Roller) is a full width explosive hazard roller capability that consists of two bank assemblies, each having six wheel stations and two wire neutralization blade stations. The EHP Roller design will: provide forward mounted variable standoff; clear routes and destroy explosive hazards; proof routes of explosive hazards and trigger mechanisms; and neutralize/detonate explosive hazards on the move.
THE REQUIREMENT: Army Contracting Command-Warren intends to solicit for 40 EHP Rollers (NSN 2590-01-626-9881), including five (5) First Article Test (FAT) EHP Rollers. The applicable North American Industry Classification System (NAICS) code assigned to this procurement is 336992.
OBJECTIVE: The objective of this market survey is to identify potential sources that are capable of producing EHP Rollers. Total estimated quantity of EHP Rollers is 338. The EHP Rollers will be provided incrementally over a several year time period.
GENERAL INFORMATION: There is no risk to you for participating in this survey. Participation in this effort is strictly voluntary with no cost or obligation to be incurred by the U.S. Government. This notice does not constitute an Invitation to Bid or Request for Proposal. This request for information does not commit the Government to pay any cost incurred in preparation of any submission to this questionnaire. The Government will in no way be bound to this information if any solicitation is issued.
Because a portion of the market survey is export controlled material, the material can only go to a U.S. business entity or a U.S. citizen. The Government will not release any export controlled material to any firms, agencies, or individuals outside the Government without the signed Acknowledgement Release on page 2 of the Market Survey. All Contractors, including potential subcontractors wishing to obtain access to unclassified technical data disclosing militarily critical technology that is under the control of, or in the possession of the Department of Defense (DoD) must be registered in the Defense Logistics Agency's Joint Certification Program (JCP).
If you have any questions, comments, or concerns, please contact Debra Drummond, Contract Specialist, by phone at 586-282-8456 or by email at debra.s.drummond.civ@mail.mil.
.

Added: Dec 01, 2015 4:01 pm Modified: Dec 29, 2015 7:52 amTrack Changes Market Survey

Explosive Hazard Pre-Detonation (EHP)

Roller with On Arm Wire Neutralization System (WNS)
PRODUCT DESCRIPTION: The EHP Roller with On Arm WNS (EHP Roller) is a full width explosive hazard roller capability that consists of two bank assemblies, each having six wheel stations and two wire neutralization blade stations. The EHP Roller design will: provide forward mounted variable standoff; clear routes and destroy explosive hazards; proof routes of explosive hazards and trigger mechanisms; and neutralize/detonate explosive hazards on the move.

THE REQUIREMENT: Army Contracting Command-Warren intends to solicit for 40 EHP Rollers (NSN 2590-01-626-9881), including five (5) First Article Test (FAT) EHP Rollers. The applicable North American Industry Classification System (NAICS) code assigned to this procurement is 336992.

OBJECTIVE: The objective of this market survey is to identify potential sources that are capable of producing EHP Rollers. Total estimated quantity of EHP Rollers is 338. The EHP Rollers will be provided incrementally over a several year time period.
GENERAL INFORMATION: There is no risk to you for participating in this survey. Participation in this effort is strictly voluntary with no cost or obligation to be incurred by the U.S. Government. This notice does not constitute an Invitation to Bid or Request for Proposal. This request for information does not commit the Government to pay any cost incurred in preparation of any submission to this questionnaire. The Government will in no way be bound to this information if any solicitation is issued.
Because a portion of the market survey is export controlled material, the material can only go to a U.S. business entity or a U.S. citizen. The Government will not release any export controlled material to any firms, agencies, or individuals outside the Government without the signed Acknowledgement Release on page 2 of the Market Survey. All Contractors, including potential subcontractors wishing to obtain access to unclassified technical data disclosing militarily critical technology that is under the control of, or in the possession of the Department of Defense (DoD) must be registered in the Defense Logistics Agency's Joint Certification Program (JCP).

If you have any questions, comments, or concerns, please contact Debra Drummond, Contract Specialist, by phone at 586-282-8456 or by email at debra.s.drummond.civ@mail.mil.

Market Survey
Explosive Hazard Pre-Detonation (EHP)
Roller with On Arm Wire Neutralization System (WNS)
PRODUCT DESCRIPTION: The EHP Roller with On Arm WNS (EHP Roller) is a full width explosive hazard roller capability that consists of two bank assemblies, each having six wheel stations and two wire neutralization blade stations. The EHP Roller design will: provide forward mounted variable standoff; clear routes and destroy explosive hazards; proof routes of explosive hazards and trigger mechanisms; and neutralize/detonate explosive hazards on the move.
THE REQUIREMENT: Army Contracting Command-Warren intends to solicit for 40 EHP Rollers (NSN 2590-01-626-9881), including five (5) First Article Test (FAT) EHP Rollers. The applicable North American Industry Classification System (NAICS) code assigned to this procurement is 336992.
OBJECTIVE: The objective of this market survey is to identify potential sources that are capable of producing EHP Rollers. Total estimated quantity of EHP Rollers is 338. The EHP Rollers will be provided incrementally over a several year time period.
GENERAL INFORMATION: There is no risk to you for participating in this survey. Participation in this effort is strictly voluntary with no cost or obligation to be incurred by the U.S. Government. This notice does not constitute an Invitation to Bid or Request for Proposal. This request for information does not commit the Government to pay any cost incurred in preparation of any submission to this questionnaire. The Government will in no way be bound to this information if any solicitation is issued.
Because a portion of the market survey is export controlled material, the material can only go to a U.S. business entity or a U.S. citizen. The Government will not release any export controlled material to any firms, agencies, or individuals outside the Government without the signed Acknowledgement Release on page 2 of the Market Survey.
If you have any questions, comments, or concerns, please contact Debra Drummond, Contract Specialist, by phone at 586-282-8456 or by email at debra.s.drummond.civ@mail.mil.
.

Added: Dec 01, 2015 4:01 pm Market Survey

Explosive Hazard Pre-Detonation (EHP)

Roller with On Arm Wire Neutralization System (WNS)
PRODUCT DESCRIPTION: The EHP Roller with On Arm WNS (EHP Roller) is a full width explosive hazard roller capability that consists of two bank assemblies, each having six wheel stations and two wire neutralization blade stations. The EHP Roller design will: provide forward mounted variable standoff; clear routes and destroy explosive hazards; proof routes of explosive hazards and trigger mechanisms; and neutralize/detonate explosive hazards on the move.

THE REQUIREMENT: Army Contracting Command-Warren intends to solicit for 40 EHP Rollers (NSN 2590-01-626-9881), including five (5) First Article Test (FAT) EHP Rollers. The applicable North American Industry Classification System (NAICS) code assigned to this procurement is 336992.

OBJECTIVE: The objective of this market survey is to identify potential sources that are capable of producing EHP Rollers. Total estimated quantity of EHP Rollers is 338. The EHP Rollers will be provided incrementally over a several year time period.
GENERAL INFORMATION: There is no risk to you for participating in this survey. Participation in this effort is strictly voluntary with no cost or obligation to be incurred by the U.S. Government. This notice does not constitute an Invitation to Bid or Request for Proposal. This request for information does not commit the Government to pay any cost incurred in preparation of any submission to this questionnaire. The Government will in no way be bound to this information if any solicitation is issued.
Because a portion of the market survey is export controlled material, the material can only go to a U.S. business entity or a U.S. citizen. The Government will not release any export controlled material to any firms, agencies, or individuals outside the Government without the signed Acknowledgement Release on page 2 of the Market Survey.

If you have any questions, comments, or concerns, please contact Debra Drummond, Contract Specialist, by phone at 586-282-8456 or by email at debra.s.drummond.civ@mail.mil.