Q&A_Set_1_-_EHP_Roller.pdf
PDF 254 KB Posted
- Attached to
- EHP ROLLER SOURCES SOUGHT NOTICE
- Solicitation number
- W56HZV16R0007
About this file
This document contains a sources sought notice for an Explosive Hazard Pre-Detonation Roller with On Arm Wire Neutralization System. The U.S. Army Contracting Command-Warren intends to solicit for the production of 40 EHP Rollers, including five units for First Article Testing, with a total estimated quantity of 338 units to be provided incrementally over several years. The EHP Roller is a full width explosive hazard roller capable of clearing routes, destroying explosive hazards, proofing routes of explosive hazards and trigger mechanisms, and neutralizing explosive hazards while in motion. Respondents to this sources sought notice should be capable of producing the EHP Rollers in accordance with the government provided technical data package.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| EHP_Roller_Market_Survey_102518.pdf | ||
| Explosive_Hazard_Pre-Detonation_Roller_(Dist_D-UNCLASS-Export_Control-FOUO)_18_Dec_2017.pdf | ||
| Sources_Sought_-_EHP_Roller_-_18_December_2017.docx | DOCX document | |
| EHP_Roller_Market_Survey_(Rev2-21_Dec_15).doc | DOC document | |
| EHP_Roller_Market_Survey_(Rev1-12_Nov_15).doc | DOC document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
EHP Roller: W56HZV-16-R-0007 - - RFI Q&A Set 1 – 16 February 2018
1. Is this a solicitation that is open to non-US companies and will we be allowed access to all the necessary source documentation when (& if) it progress to a full response? We ask as the EHP
Roller System graphics document has the following statement on every page:
“DISTRIBUTION STATEMENT D Distribution authorized to Department of Defense and U.S.
DoD contractors only; Export Control;30Oct15. Other requests for this document shall be referred to ACC-WRN,CCTA-HTM-A,6501E. 11 Mile Road, MS416, Warren, MI48397-5000”.
USG Answer: It is the contractor's responsibility to comply with export control laws and regulations.
The technical data package is labeled in accordance with DoD Instruction 5230.24.
At www.fbo.gov "User Guides" with export control information are available.
2. Are we correct in assuming that the response requires us to only complete answers to the 12 questions (plus sub-sections) as per documentSources_Sought_-_EHP_Roller_-
_18_December_2017?
USG Answer: Please follow the instructions for completing the survey defined under the
“INSTRUCTIONS FOR COMPLETING SURVEY” section of the Sources Sought attachment.
3. Are we correct is assuming this solicitation is effectively a ‘build to print’ of the current EHP roller as shown at an unclassified level in the documentExplosive_Hazard_Pre-
Detonation_Roller_(Dist_D-UNCLASS-Export_Control-FOUO)_18_Dec_2017?
USG Answer: The winning offeror will be required to build the EHP Roller in accordance with (IAW) the Government provided Level III Technical Data Package (TDP)
12579931.
4. Is the system production ready?
USG Answer: Yes.
a. If yes:
i. Will the USG transfer all drawings to the winning manufacturer?
USG Answer: The Government will share the Level III TDP 12579931 drawings to the winning manufacturer as Government Furnished Information.
ii. Has vendors of essential sub components been chosen or identified by
USG?
USG Answer: The recommended/approved sources of supply for essential subcomponents have been identified by the Government and are noted in the Level III
TDP 12579931.
b. If no:
i. What level of engineering is needed from the winning manufacturer?
USG Answer: All manufacturing and engineering requirements are stated in EHP
Roller Level III TPD 12579931.
5. Has a prototype been built?
USG Answer: Five pre-production EHP Roller test assets have been produced at
Anniston Army Depot (ANAD) and underwent Production Verification Testing.
File details come from the government source that posted it. Updated .