Drydock for USCGC chock

Added: March 27, 2008 Modified: Apr 29, 2008 10:24 amTrack Changes The United States Coast Guard Maintenance & Logistics Command, Atlantic intends to issue a Commercial Request for Quote (RFQ) for Dry Dock Repairs to the USCGC CHOCK (WYTL-65602), a 65 Foot "A" Class HARBOR TUG (WYTL-65602). The Coast Guard intends to conduct the procurement in accordance with Federal Acquisition Regulation (FAR) Part 12, Acquisition of Commercial Items, and FAR Subpart 13.5, Test Program for Certain Commercial Items. The simplified acquisition will be issued as a Request for Quote (RFQ), on or about APRIL 07, 2008. The RFQ will be issued via the Federal Business Opportunity (FEDBIZOPS) web page at www.eps.gov. Hard copies of the specification and solicitation will not be issued. It is incumbent upon contractors to monitor the FEDBIZOPS web page for RFQ release and all subsequent amendments. FEDBIZOPS also contains an option automatic notification service. THE ACQUISITION WILL BE SOLICITED AS A SET-ASIDE FOR SMALL BUSINESS CONCERNS.

The acquisition is for DRYDOCK repairs to the USCGC CHOCK (WYTL-65602) homeport in Portsmouth, VA. There is a one time geographic restriction for this dry-dock availability to a facility within 180 nautical miles (nm), with a transit must be limited to protected waters in seas less than six feet and a depth greater than nine feet. The performance period will be Forty (40) calendar days with a start date on or about 04 AUGUST 2008. The place of performance will be at the contractor's facility.



The scope of the acquisition is for the overhauling, cleaning and repairing of various items aboard the USCGC CHOCK (WYTL-65602). This work will include, but is not limited to: Welding Repairs; Clean and Inspect Sewage and Grey Water Collection and Holding Tanks; Remove, Inspect, and Reinstall Propellers; Perform Minor Repairs and Reconditioning of Propeller; Clean, Inspect, and Test Grid Coolers, Remove Transducer and Preserve Transducer Hull Ring; Renew Valves; Remove, Inspect, and Reinstall Rudder Assembly; Inspect Various Deck Fittings; Preserve and Disinfect Potable Water Tanks; Prepare and Coat Main Deck Surfaces; Preserve Underwater Body; Preserve Freeboard; Perform Boat Davit Maintenance; Renew Cathodic Protection System; Routine Drydocking; Provide Temporary Logistics; Clean Exhaust Piping; Reseal One-Step Deck Covering Systems; Renew Fire and Smoke Detection System; Renew Bulkhead Sheathing Engine Room; Renew Sewage Piping; Ultrasonic Thickness Measurements-Underwater Body and Ultrasonic Thickness Measurements-Freeboard.



All welding and brazing shall be accomplished by trained welders who have been certified by the applicable regulatory code performance qualification procedures. All reference documents are available for viewing at 300 East Main Street, Suite 600, Norfolk, VA 23510-9102.



Drawings are now available on CD-ROM. The CD-ROM sets are available for all cutters and will be free of charge to contractors upon request [ten days from solicitation issuance]. MLCA must have ten (10) days advance notice to complete a CD-ROM set of drawings. The CD-ROM(s) contain WINDOWS compliant raster/vector formats (e.g.*.DWF, etc). All responsible sources may submit an offer, which shall be considered by the United States Coast Guard. For information concerning this acquisition contact, the Contracting Official listed above.



Quotes are due on or about APRIL 30, 2008, 200 pm Eastern Standard Time to: Commander (vpl-2) MLCLANT, 300 East Main Street, Suite 600, Norfolk, VA 23510-9102. Requests for Quotations and additional information requests may be faxed to (757) 628-4676 Attn: Lori Ellis.

Added: March 27, 2008 The United States Coast Guard Maintenance & Logistics Command, Atlantic intends to issue a Commercial Request for Quote (RFQ) for Dry Dock Repairs to the USCGC CHOCK (WYTL-65602), a 65 Foot "A" Class HARBOR TUG (WYTL-65602). The Coast Guard intends to conduct the procurement in accordance with Federal Acquisition Regulation (FAR) Part 12, Acquisition of Commercial Items, and FAR Subpart 13.5, Test Program for Certain Commercial Items. The simplified acquisition will be issued as a Request for Quote (RFQ), on or about APRIL 07, 2008. The RFQ will be issued via the Federal Business Opportunity (FEDBIZOPS) web page at www.eps.gov. Hard copies of the specification and solicitation will not be issued. It is incumbent upon contractors to monitor the FEDBIZOPS web page for RFQ release and all subsequent amendments. FEDBIZOPS also contains an option automatic notification service. THE ACQUISITION WILL BE SOLICITED AS A SET-ASIDE FOR SMALL BUSINESS CONCERNS.

The acquisition is for DRYDOCK repairs to the USCGC CHOCK (WYTL-65602) homeport in Portsmouth, VA. There is a one time geographic restriction for this dry-dock availability to a facility within 180 nautical miles (nm), with a transit must be limited to protected waters in seas less than six feet and a depth greater than nine feet. The performance period will be Forty (40) calendar days with a start date on or about 04 AUGUST 2008. The place of performance will be at the contractor's facility.



The scope of the acquisition is for the overhauling, cleaning and repairing of various items aboard the USCGC CHOCK (WYTL-65602). This work will include, but is not limited to: Welding Repairs; Clean and Inspect Sewage and Grey Water Collection and Holding Tanks; Remove, Inspect, and Reinstall Propellers; Perform Minor Repairs and Reconditioning of Propeller; Clean, Inspect, and Test Grid Coolers, Remove Transducer and Preserve Transducer Hull Ring; Renew Valves; Remove, Inspect, and Reinstall Rudder Assembly; Inspect Various Deck Fittings; Preserve and Disinfect Potable Water Tanks; Prepare and Coat Main Deck Surfaces; Preserve Underwater Body; Preserve Freeboard; Perform Boat Davit Maintenance; Renew Cathodic Protection System; Routine Drydocking; Provide Temporary Logistics; Clean Exhaust Piping; Reseal One-Step Deck Covering Systems; Renew Fire and Smoke Detection System; Renew Bulkhead Sheathing Engine Room; Renew Sewage Piping; Ultrasonic Thickness Measurements-Underwater Body and Ultrasonic Thickness Measurements-Freeboard.



All welding and brazing shall be accomplished by trained welders who have been certified by the applicable regulatory code performance qualification procedures. All reference documents are available for viewing at 300 East Main Street, Suite 600, Norfolk, VA 23510-9102.



Drawings are now available on CD-ROM. The CD-ROM sets are available for all cutters and will be free of charge to contractors upon request [ten days from solicitation issuance]. MLCA must have ten (10) days advance notice to complete a CD-ROM set of drawings. The CD-ROM(s) contain WINDOWS compliant raster/vector formats (e.g.*.DWF, etc). All responsible sources may submit an offer, which shall be considered by the United States Coast Guard. For information concerning this acquisition contact, the Contracting Official listed above.



Quotes are due on or about APRIL 30, 2008, 200 pm Eastern Standard Time to: Commander (vpl-2) MLCLANT, 300 East Main Street, Suite 600, Norfolk, VA 23510-9102. Requests for Quotations and additional information requests may be faxed to (757) 628-4676 Attn: Lori Ellis.