Door metal marine

The United States Coast Guard Surface Forces Logistics Center has a requirement and requesting quotations for the following part:

Item 1)
NSN: 2040-01-297-2213
DOOR, 26" x 54" CLEAR OPENING
UNIT USED ON WPB CLASS CUTTER
QTY: 07 EACH
P/N: BM21-2RH

Item 2)
NSN: 2040-01-298-5741
HATCH MARINE, 24 INCH OPENING, FLUSH TYPE, QUICK OPERATING CONTROL, 24 INCH LENGTH, OPREATION LOCATION ABOVE
UNIT USED ON WPB CLASS CUTTER
QTY: 03 EACH
P/N: BM21-9A

Item 3)
NSN: 2040-01-304-6448
DOOR 26 INCH OPENING WIDTH 54 INCH MARINE STRUCTURAL, ALUMINUM QUICK OPERATING'OUTSIDE HASP, HANDWHEEL OPERATION LIGHT FIXED 37 5/8 INCH, DISTANCE BETWEEN SILL AND FIXED LIGHT, 6 EACH SLIDING IN DOORS DOG WATERTIGHT LEFT HAND WITH PORTLIGHT (P/N 21-2lh) 8 INCH OEPNING CORNER RADIUS
UNIT USED ON WPB CLASS CUTTER
QTY: 01 EACH
P/N: BM21-2LH

Item 4)
NSN: 2040-01-294-3545
DOOR METAL MARINE
UNIT USED ON WPB CLASS CUTTER
QTY: 02 EACH
P/N: BM21-1RH

Item 5)
NSN: 2040-01-304-4291
DOOR MARINE WATERTIGHT, STEEL UNFINISHED
26 INCH OPENING WIDTH X 57 INCH OPENING LENGTH, LEFT HAND, 3/16 INCH PANEL THICKNESS WITH SIX SLIDING DOGS, HANDWHEEL OUTSIDE HASP 8 INCH OPENING CORNER RADIUS
UNIT USED ON WPB CLASS CUTTER
QTY: 02 EACH
P/N: BM21-1RH

MANUFACTURE IN ACCORDANCE WITH DRAWING 110CWPB167-006LH AND SPECIFICATION P-167-2032
PROPOSED VENDOR MAY PROVIDE OPTIONS OR DEVIATIONS TO DRAWINGS FOR COAST GUARD ENGINEERING FINAL APPROVAL
.
The items are used on various US Coast Guard vessels. All items will be individually packaged and marked IAW SP-PP&M-001. Inspection and acceptance shall take place at Destination after verification of preservation, individual packaging and marking requirements and confirmation of no damage during transit. Failure to comply with packaging requirements will result in rejection and nonpayment. If you are offering alternate part concerns having the expertise and required capabilities to provide these items are invited to submit complete information discussing the same within two (2) calendar days from the day this notice is posted.
.

Delivery shall be F.O.B. Destination to USCG Surface Forces Logistics Center, Baltimore MD.
REQUIRED DELIVERY DATE: May 30, 2016

This is a combined synopsis/solicitation for a commercial item prepared in accordance with the format outlined in FAR Subpart 12.6, FAC 2005-87 (Mar 2016) and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation. Quotations are being requested and a written solicitation will not be issued. The NAICS code for this solicitation is 332321. The resultant purchase order will be awarded using simplified acquisition procedures in accordance with FAR 13
All responsible sources may submit a quotation via email to Yvette.R.Johnson@USCG.mil which if timely received, shall be considered by the Agency. Companies must have valid DUNS numbers and be registered with System for Award Management (www.sam.gov) and shall provide the company Tax Information Number (TIN) with their offer. The closing date and time for receipt of quote is April 04, 2016 at _1:00 PM. Eastern Standard Time.

OFFERORS MUST SUBMIT THE FOLLOWING INFORMATION ON THEIR QUOTE:
Disclosure: The offeror under this solicitation represents that [Check one]:
__ it is not a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73;
__ it is a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73, but it has submitted a request for waiver pursuant to 3009.104-74, which has not been denied; or
__it is a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73, but it plans to submit a request for waiver pursuant to 3009.104-74. (g) A copy of the approved waiver, if a waiver has already been granted, or the waiver request, if a waiver has been applied for, shall be attached to the bid or proposal.
(End of provision)
The following FAR Clauses provisions apply to this solicitation. FAR 52.212-1, Instructions to Offerors-Commercial Items (Dec 2015); FAR 52.212-3, Offeror Representations and Certifications-Commercial Items (Dec 2015) with Alternate I. Offeror(s) must include a completed copy of FAR 52.212-3 with their quote.
The following FAR Clauses apply to this solicitation. Offerors may obtain full text versions of these clauses electronically at www.arnet.gov.; FAR 52.212-4, Contract Terms and Conditions-Commercial Items (Dec 2014); FAR 52.212-5, Contract Terms & Conditions Required to Implement Statutes or Executive Orders-Commercial Items ( Feb 2016). The following clauses listed within FAR 52.212-5 are applicable: FAR 52.204-10 Reporting Eecutive Compensation and First-Tier Subcontract Awards (Aug 2012)(Pub.L. 109-282)(31 U.S.C. 6101 note); FAR 52.219-28, Post Award Small Business Program Representation (Jul 2013)(15 U.S.C. 632(a)(2)); FAR 52.222-3, Convict Labor (Jun 2003)(E.O. 11755); FAR 52.222-19 Child Labor-Cooperation with Authorities and Remedies (Jan 2014) (E.O. 13126); FAR 52.222-21, Prohibition of Segregated Facilities (Feb 1999); FAR 52.222-26, Equal Opportunity (Mar 2007)(E.O. 11246); FAR 52.222-36 Affirmative Action for Workers with Disabilities (Oct 2010) (29 U.S.C. 793); FAR 52.223-18 Encouraging Contractor Policies to Ban Text Messaging while Driving (Aug 2011) (E.O. 13513); (SEP 2009); FAR 52.225-1, Buy American Act-Supplies (May 2014)(41 U.S.C. 10a-10d); FAR 52.232-33, Payment by Electronic Funds Transfer-Central Contractor Registration (Jul 2013)(31 U.S.C. 3332). The following items are incorporated as addenda to this solicitation: Copies of HSAR clauses may be obtained electronically at www.dhs.gov.
CGAP 3042.302-90 Valuation Requirements for the Acquisition of Spare Parts Purchased for Inventory Control Points from HQ Contracts (OCT 2008). Copies of CGAP clauses may be obtained electronically at: www.uscg.mil/acquisition/procurement/pdf/CIM_4200_19H.pdf