A07_-_W91RUS-18-R-DE99.pdf

SEE ADDENDUM

(No Collect Calls)

W91RUS18RDE99 19-Sep-2018

b. TELEPHONE NUMBER 8. OFFER DUE DATE/LOCAL TIME

12:00 PM 24 Sep 2018

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA X ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

W91RUS9. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

GLENN E. HOHMAN

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

1 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.X

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

0011240618-0001

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED ORX

SMALL BUSINESS

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

ACC-APG

2133 CUSHING ST

BLDG 61801 RM 3410

FORT HUACHUCA AZ 85613

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE W81XD5 16. ADMINISTERED BY

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

W6VF PM EQP ONLY-TMDE

W6VF PM EQP ONLY-TMDE

TMDE MISSION PBUSE RECORD ACCT

BLDG 61801 DOOR E19

FORT HUACHUCA AZ 85613-6000

TEL: 520-538-7188 FAX:

(520) 538-1838FAX:

TEL: (520) 538-1376 SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

NAICS:

334515

X

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF61

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

W91RUS18RDE99

Section SF 1449 - CONTINUATION SHEET

INSTRUCTIONS TO OFFERORS

1. As a result of this solicitation, the Government will award a Firm Fixed‐Price contract on an ALL OR NONE basis. The offer must meet all the terms and conditions of the solicitation.

2. Complete the clause at FAR 52.209‐11 “Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law” (FEB 2016).

3. Payment for the resultant contract will be made using Wide Area Work Flow (See Clause at DFAR 252.232‐7006, Wide Area Workflow Payment Instructions (MAY 2013).

4. Quotes shall be submitted electronically to the POC below no later than 1200 MST 24 September 2018.

5. The Question/Answer period for this RFQ will end at 1700 MST 20 September 2018.

6. Questions about this solicitation should be submitted by email to Glenn Hohman at glenn.e.hohman.civ@mail.mil.

SALIENT CHARACTERISTICS

Salient Characteristics for N9000B CXA Signal Analyzer - Signal Analyzer, Multi-touch

Key Features: Measurement capabilities include general-purpose spectrum analysis and one-button PowerSuite measurements. The optional built-in tracking generator1 provides a fast and cost-effective solution for scalar network analysis. The additional 75 Ω input connector helps make an easy cable TV signal measurement. For greater flexibility, you can quickly configure—and reconfigure—the CXA with more than 25 of software applications for specific measurements including analog demodulation, digital video, and wireless connectivity. Licensing upgrades make transitions fast and easy.

Technical Specifications:

Frequency 9 kHz to 26.5 GHz

Frequency Options 3, 7.5, 13.6, 26.5 GHz

Maximum Analysis Bandwidth 25 MHz

Bandwidth Options 10 standard, 25 MHz

Maximum Real-Time Bandwidth n/a

Real-Time Bandwidth Options n/a

DANL @1 GHz -163 dBm

Phase Noise @1 GHz (10 kHz offset) -110 dBc/Hz

Phase Noise @1 GHz (30 kHz offset) n/a

Phase Noise @1 GHz (1 MHz offset) -130 dBc/Hz

Overall Amplitude Accuracy ±0.5 dB

TOI @1 GHz (3rd Order Intercept) +17 dBm

Maximum Dynamic Range 3rd Order @1 GHz

111 dB

Applications-General Purpose

89600 VSA Software Analog Demodulation

MATLAB

Noise Figure Phase Noise Pulse Stimulus Response

EMI

Vector Modulation Analysis

Applications-Cellular

GSM/EDGE

LTE/LTE-Advanced

W-CDMA/HSPA/HSPA+

NB-IoT

Applications-Wireless Connectivity

Short Range Communications (ZigBee, Z- Wave)

Bluetooth® (BR/EDR/LE4.2/5.0) WLAN 802.11(a/b/g/j/p/n/ac/af/ah/ax)

Applications-Digital Video n/a

Performance Level ◆◆◇◇◇◇

Standard Attenuator Range 50 dB

Standard Attenuator Step 10 dB

Minimum Duration for 100% Probability of Intercept n/a

Detectable Signal Duration w/Signal to Mask >60 dB n/a

Spur Free Dynamic Range n/a

Multi-Domain Bandwidth n/a

Display Views n/a

Triggering Level RF Burst Line

External Periodic

Applications with Frequency Mask Trigger n/a

DANL @2 GHz, No Preamplifier n/a

DANL @10 GHz, No Preamplifier -142 dBm/Hz

Applications Available Yes

Salient Characteristics for FSM 70S Cable Analyzer - Fusion Splicer Kit w/Cleaver & Battery

Key Features:

Bluetooth wireless communication Automated and programmable wind protector 13-second automated tube heater Fully ruggedized for shock, dust and moisture Li-ion battery with 200 splices/shrinks per charge 5 mm cleave length for splice on connector or small package needs Sheath clamp or fiber holder operation On-board training and support videos Multi-function transit case with integrated workstation

Technical Specifications:

Applicable type of fibres SM (ITU-T G.652 and G657), MM (ITU-T G.651), DS (ITU -T

G.653), NZDS (ITU-T G.655)

Fibre count Single Applicable fibre dimensions Cladding diameter: 80 to 150μm. Coating diameter: 100 to

1000μm Cleaved length 5mm to 16mm Splicing modes Total 100 modes Typical splice loss 0.02dB with SM, 0.01dB with MM, 0.04dB with DS and 0.04dB with NZDS (measured by cut-back method relevant to ITU-T & IEC standard)

Return loss >>60dB Splicing time Typical 7sec. with SM FAST, 12sec. with SM AUTO and 15sec with AUTO modes with standard SM (ITU-T G.652) Splice loss estimate Available using dual camera, core alignment data Attenuation splice function Intentional high splice loss of 0.1dB to 15dB (0.1dB step) can be made for an in-line fixed attenuator Tube heater/heating time Built-in tube heater with 30 heating modes/Typical 14sec with

Fujikura FP-03 Applicable protection sleeve 60mm, 40mm and micro series Storage of splice result The last 2000 results to be stored in the internal memory Tension test 1.96 to 2.25N Operating condition 0 to 5,000m above sea level, 0 to 95%RH and -10 to 50 deg C and up to 15m/s wind velocity, respectively Storage condition 0 to 95%RH (non dew),short term storage -40 to 80°C, long term storage with battery: -20 to 30°C Dimensions 146W × 159D × 150H (mm)

Weight 2.5kg with AC adaptor, 2.7kg with battery Viewing method and display Dual cameras with 4.73” colour LCD monitor Fibre view and magnification X/Y (320X magnification), or both X and Y simultaneously (200X magnification) Power supply Applicable voltage from 100 to 240V AC or 10 to 15V DC with

ADC-18. 14.8V DC with BTR-09 No. of splice cycles with battery Typical 200 cycles (splice/splice protector heat) with BTR-09 Electrode life 3000 arc-discharges.

Connectivity USB 1.1 (Mini-B type) connector for PC communication. 6-pin

Mini-DIN connector for HJS-02, HJS-03 or SH-8C power supply

Salient Characteristics for VFF5 – Fiber Optic Cable Continuity Tester & Fault Finder

Key Features:

Finds Breaks, Faulty Splices and Crimps Poor Components or Connections Low-Cost, Basic Fiber Test Tool High Output, Class 2, 670nm Laser Diode Includes Carrying Case, Lens Cap, Batteries, Lanyard, and Instruction Sheet, Rugged, Metal

Housing

Technical Specifications:

Light source: Class II laser diode Central wavelength: 650nm/±10nm Spectral width (FWHM): <5nm Laser light pulse duration: Continuous in CW mode 600ms in 1Hz modulation mode Environment: Operation: -10°C to +50°C,0 to 95%RH (non-condensing) Storage: -20°C to +80°C, 0 to 95%RH (non-condensing) Power supply: Two 1.5V AA Alkaline batteries Dimension and weight (w/ batteries): Length: 203mm with ST dust cap Connector: Diameter: 22mm Battery life: Approximate weight: 230g Weight (w/o batteries): 2.5mm universal Length: >80 hours Diameter: 0.30lbs/136g 8.7in/220mm 1.25in/32mm Included Accessories: Includes holster, integrated rubber port cover, lanyard, cell-phone style belt clip, instruction sheet and batteries

Salient Characteristics for LRAT-2000 - Network Auto Tester

Multiple user-configured AutoTests Cable length measurement, fault location and fault type TruePower™ Power over Ethernet (PoE) measurement Ethernet speed and duplex verification at 10/100/Gigabit rates Twisted pair and fiber-optic link testing Nearest switch identification DHCP, DNS and Gateway connectivity tests Ping and TCP port connectivity tests to up to 10 user-selected targets Results saved on the tester or uploaded to the Link-Live Cloud Service with zero-touch

Results, project and staff management using the Link-Live Cloud Service Packet reflection at rates up to 1 Gbps

Salient Characteristics for 1T10G-1000 - OneTouch AT 10G Network Assistant w/accessory kit

Key Features: The NETSCOUT OneTouch AT 10G Network Assistant is an automated 10-Gigabit Ethernet troubleshooting and performance measurement tester. Troubleshoots common problems, or proves that the network is not at fault, by emulating a client device and measuring the end user experience. Measures end-to-end path performance within the LAN or data center to validate SLA compliance and ensure infrastructure readiness for application delivery. AutoTests profile streamline testing and promotes best practices. Uploads sequential AutoTest results to the companion cloud service to troubleshoot intermittent problems and optimize performance. Discovers networked devices, key attributes, connection paths and problems. Provides the ability to manage the tester remotely.

Technical Specification:

Cable Types: CAT3 , CAT4 , CAT5 , CAT5e , CAT6

Compliant Standards: CAN/CSA-C22.2 No. 61010-1-04 , EN 61326-1:2006 , IEC 61010- 1:2001

Connectors: RJ-45 , SFP+

Device Type: Network tester kit

Included Accessories: 1000BASE-SX transceiver , 10G-SR SFP+ transceiver , AC power adapter , Carrying case , Carrying strap , Hand strap , SD card

Kit Content: OneTouch AT 10G Module , Test frame

Media: Copper , Fiber

Test Standards: ISO/IEC 11801 Class C , ISO/IEC 11801 Class D , ISO/IEC 11801 Class E , ISO/IEC 11801 Class F

Power Input Voltage: 100-240 V

Shock & Vibration Tolerance Shock And Vibration Standards:

MIL-PRF-28800F: Class 3

Salient Characteristics for CIQ-FTKSFP - Network Cable Qualification Tester w/accessory kit

Key Features: Determines if your existing cabling has the bandwidth to support voice, 10/100, VoIP or Gigabit Ethernet. Provides the ability to show why existing cabling cannot support the network's bandwidth requirement. Detects what's at the end of any cable and displays device configuration (speed/duplex/pairing). Graphically maps wiring configuration and shows distance to faults with Intelligent Wiremap. The fiber optic cable test kit with SimpliFiber Pro meter measures power and loss for verification of cabling in fiber networks.

Cable Types Supported: UTP, STP, FTP, SSTP, RG6, RG59, audio and security Qualification Autotests: 1000BASE-T, 100BASE-TX, 10BASE-T, VoIP, 1394b S100, TELCO, Wiremap only, Coax Supported Tests: Wiremap, length, cable signal performance, digital toner, analog toner, Ethernet port detection and identification, analog telephone detection, blink port light, continuity, speaker test, cable fault finding, video signal detection.

Wiremap: Can detect single wire faults and supports MultiMap mode with up to seven remote office identifiers. Draws proportional wire length to breaks. Detects split pairs.

Find fault: Measures crosstalk and impedance and compares against appropriate limits based on qualification test selected. Detects location of large point sources as well as distributed sources in the cabling if they are sufficient to disqualify the application

Results Storage: Up to 250 qualification test results

Power: Battery type: 4 AA (NEDA 15A, IEC LR6) alkaline batteries

Battery Life: 20 hours of typical use, without backlight

Other Battery Types Supported: 4AA photo lithium, NIHM, NICAD

Dimensions and Weight: 7in x 3.5in x 1.75in (17.8cm x 8.9cm x 4.5cm) 1.2 lb (0.55 kg)

Salient Characteristics for 701K - Classic Tone and Probe Kit

Key Features: Uses two distinct tone signatures to trace telephone, data, and security cables. LED brightness indicates received signal strength. Three listening modes: speaker, headset, or butt-in telephone. Enhanced voltage protection (up to 150 V DC).

Technical Specifications:

Gain (nominal): 30 db Input Impedance (nominal): 100 MΩ Metal Tip Resistance: 0Ω Plastic Tip Resistance: 300Ω Headset: 3.5 mm sterio plug; 8 ohms minimum Battery: One 9 VDC (NEDA 1604, JIS 006P, or IEC 6LR61) Battery Life (nominal): >50 hours Length: 231 mm (9.0”) Width: 55 mm (2.2”) Depth: 28 mm (1.1”) Weight: 145 g (5.2 oz) Operating/Storage Temperature: 0 °C to 50°C (32 °F to 122 °F) Tone Specifications (77HP-G/6A) Talk Battery (into 600Ω): 4.6 VDC Output Power (into 600Ω): +10 d Bm Resistive Short Visual Indication: <10 kΩ Resistive Short Audio Indication:<200Ω Output Frequency (nominal) Alternating-890/960 Hz Warbling-Slow: 1.3 Hz/Fast: 6 Hz Voltage Protection (into 600Ω): 150 VDC Battery: 9 VDC (NEDA 1604, JIS 006P, or IEC 6LF61) Battery Life: >50 hours Length: 32 mm (1.25”) Width: 64 mm (2.5”) Height: 57 mm (2.25”) Weight (max): 128 g (4.5 oz.)

Operating Temperature: 0 °C to 50 °C (32 °F to 122 °F) Storage Temperature: -50 °C to 75 °C (-58 °F to 167 °F)

Salient Characteristics for OPVXG-10G – OptiView XG Network Analyzer w/accessory kit consisting of OPVXG-SFP-PLUS-LR-C, SFP+-Transceiver, Base-LR, 1310Nm

Key Features: OptiView XG is a network engineer's tablet with dedicated custom hardware for automated network and application analysis in the deployment and troubleshooting of new technologies. It's at home in the data center with support for 10 GbE and virtualized servers; at the users' office supporting 802.11n and application analysis; and with the switches and routers in between.

Use it to find problems from your desk or take it - with the data it has collected - to the trouble spot for first-hand analysis. Its unique troubleshooting system is based on proactive monitoring and analysis, graphical path analysis, and application-centric analysis, which provides expert guidance that automatically identifies the root cause of problems.

Technical Specifications:

Battery Included Qty:

Run Time (Up To): 2 hour(s) Technology: Lithium ion Environmental Parameters Max Altitude Operating:

15090 ft

Max Operating Temperature:

86 °F

Max Storage Temperature:

140 °F

Min Operating Temperature: f

50 °F

Min Storage Temperature:

-40 °F

Header Brand: NetScout Manufacturer: NETSCOUT Model: XG Network Analysis Tablet, 10 Gbps Packaged Quantity: 1 Dimensions & Weight Depth: 2 in Height: 9.4 in Weight: 5.51 lbs Width: 12.4 in Display Color Support: Color Display Resolution: 1024 x 768 pixels Features: Backlight , Touch-screen Technology: LCD Network Tester Cable Types: UTP Compliant Standards:

EN 61010-1 2nd edition

Connectors: RJ-45 x 2 , SFP , SFP+ Device Type: Network tester Features: USB connectivity Included Accessories:

2 x carrying straps , AC power adapter , Soft case , USB flash drive

Media: Copper , Fiber , Radio Tests, Tools and Measurements:

IEEE 802.11 a/b/g/n discovery , Network element discovery

Power Input Voltage: 100-240 V Output Voltage: 19 V

Salient Characteristics for OFP-100-QI - OTDR

Smartphone, "gesture-based" interface that allows anyone to perform expert fiber testing with maximum efficiency

Fastest trace time at 2 seconds per wavelength to accelerate fiber certification and troubleshooting

Ultra-short dead zones to analyze datacenter fibers with short fiber patch cables and dense connectors

"DataCenter OTDR" configuration to effectively test datacenter fiber with minimal set-up and trace time

Graphical EventMap view greatly simplifies the interpretation of OTDR trace results Project management capability enables efficient job and user assignments and tracks project progress with pass/fail results Enhanced productivity with the fastest trace times, one-button set ups and integrated reporting Maximized operator efficiency with task-focused, simplified usability Increased reliability of all high-bandwidth networks

FiberInspector probe specification Magnification ~ 200X with OptiFiber Pro Display Light source Blue LED Power source TFS mainframe

Field of View (FOV) Horizontal: 425 µm Vertical: 320 µm

Minimum detectable particle size

0.5 µm

Dimensions Approximately 6.75 in x 1.5 in (1175 mm x 35 mm) without adapter tip

Weight 200 g

Temperature range Operating: 32°F to 122°F (0 °C to +50 °C) Storage: -4°F to +158°F (-20°C to +70°C)

Certifications 200 g VFL specifications On/Off control Mechanical switch and a button on the touch screen Output power 316 µW (-5 dBm) = peak power = 1.0 mW (0 dBm) Operating wavelength 650 nm nominal Spectral width (RMS) ±3 nm Output modes Continuous wave Pulsed mode (2 Hz to 3 Hz blink frequency) Connector adapter 2.5 mm universal Laser safety (classification) Class II CDRH Complies to EN 60825-2 General specifications Weight Mainframe with module and battery: 3 lbs, 5 oz (1.28 kg)

Dimensions Mainframe with module and battery: 2.625 in x 5.25 in x 11.0 in (

6.67 cm x 13.33 cm x 27.94 cm)

Battery Lithium ion battery pack, 7.2 volts

Battery life Eight hour Auto OTDR operation, dual wavelength, no video probe connected, 150 m of fiber

Charge Time Tester Off Four hours to charge from 10% to 90% capacity Tester On Six hours to charge from 10% to 90% capacity with the tester on Environmental specifications Operating temperature* -18°C to 458°C Non-operating temperature -30°C to 60°C

Operating altitude 4,000 m (13123 ft) 3200 m (10,500 ft) with ac adapter

Storage altitude 12,000 m

EMC EN 61326-1

Salient Characteristics for OPVXG-SFP-PLUS-LR – Optical Transceiver Module, SFP+, 10G Base- LRM, 1310 Nm, Single Mode

Key Features:

Single Mode Optical Transceiver Module

SFP+

10G BASE-LR

1310 nm

Technical Specifications:

Optical Transceiver Module, Sfp+, 10gbase-Lr, 1310nm, Single Mode

Salient Characteristics for CRT-400 - Cell Resistance Tester

Key Features:

Handheld battery cell resistance tester Displays and records information Allows transfer of readings to a PC for analysis and report generation Patented Resistance Test Method USB capabilities

Mouting Handheld User Interface Battery Analysis Software (BAS) Power Input AC Adapter Input, Voltage = 90 – 264 VAC Ports USB Height (in/mm) 12in./305mm Width (in/mm) 7in/178mm Depth (in/mm) 3in/76mm Weight (lbs/kgs) 3.4lbs/1.5kg

Salient Characteristics for 53151A - 26.5 GHz Frequency Counter

Key Features:

Ultra-wideband, single input from 50 MHz to 26.5 GHz Simultaneous frequency and power measurement with analog peaking indicator Accuracy: +/-1 LSD +/- residual stability +/-(timebase error x frequency) GPIB and RS-232 interfaces standard

Salient Characteristics for E4146QUAD – OTDR Module

• Integrated singlemode and multimode CW Light source and Broadband Power Meter

• TIA/IEC pass/fail thresholds

• Propagation delay measurement in multimode (TIA-568-C)

• Optimized for testing 10MB to 40GigE

• Enables Tier 2 certification of Premises networks

• For Tier 1 Fiber Certification, see the JDSU Certifier40G

• IEC 61280-4-1 compliant using an external mode conditioner

Dynamic range of 26/24dB (MM) and 37/35dB (SM)

Salient Characteristics for E41OTDRPM – OTDR Power Module

Power Meter Option (through SM and MM OTDR Ports) (Not the Base Unit) Wavelengths: Multimode 850/1300 nm, Single-mode 1310/1490/1550/1625/1650 nm Output Power Level: -3 to -30 dBm, -2 to -50 dBm

Salient Characteristics for E41OTDRLS – OTDR List Source Module

Light Source Option (through SM and MM OTDR Ports) Wavelengths: Multimode 850/1300 nm, Single-mode 1310/1550 nm Output Power Level: -3.5 dBm (CW), -6.5 dBm (Modulated)

Salient Characteristics for EUSTAD – Universal Adapter

Salient Characteristics for E40PMVFL – Connector for Power Module/Visual Fault Locator

Compact, ergonomic design for ultimate portability Visible wavelength is 650 nm High powered laser (1 mW) for single-mode (> 7 km) and multimode (> 5 km) connectors Continuous or Flash illumination Universal connector interface for quick and easy connection

2.5 mm connector input (1.25 mm adapter available)

Salient Characteristics for Fluke-1621 Kit – Earth Ground Tester Kit, 128 Hz, 250 VAC

3-pole Fall-of-Potential earth testing for basic measurements 2-pole resistance measurements for added versatility Easily capture values with single-button operation Ensure accurate measurements with automatic ‘noise’ voltage detection Hazardous voltage warning offers increased user protection Clearly read and record data with a large, backlit display Hard carrying case Rugged holster and design for tough work environments Portable size allows for easy transportation Instantly be alerted to measurements outside of your set limit, when you use the adjustable limit setting 600 V Cat II

Technical Specification:

Measuring functions 3-pole earth ground resistance, 2-pole AC resistance of a conductor, Interference voltage

Intrinsic error Refers to the reference temperature range and is guaranteed for one year

Measuring rate 2 measurements/second

Battery1 One 9 volt alkaline (LR61)

Battery condition LO-BAT is displayed if voltage drops below 6.5 V

Voltages

Between jacks H/C2 and E/C1

250 Veff maximum (effective voltage)

Between jacks S/P2 and E/C1

250 Veff maximum

Climatic class VDE/VDI 3540 RZ (conforming to KWG as per DIN 40040, 4/87)

Temperature performance2

Working -10°C to +50°C (+14°F to +122°F)

Operating 0°C to +35°C (+32°F to +95°F)

Storage -20°C to +60°C (+68°F to +140°F)

Reference +23°C ±2°C (+73°F ±4°F)

Temperature coefficient

±0.1% of range per degree Kelvin

Safety IEC/EN 61010-1, 600 V CAT II, pollution degree 2

Dimensions 113 x 54 x 216 mm (4.5 x 2.1 x 8.5 in), including holster

Weight 850 g (1.9 lb), including standard accessories, volume approximately 600 cm3

Electrical Specifications

Maximum deviations

E1 Influence factor Position

E1 Deviation influence 0%

E2 Influence factor Supply voltage

E2 Deviation influence 0%

E3 Influence factor Temperature E3

E3 Deviation influence 2.3%

E4 Influence factor Serial interference voltage (20 V)

E4 Deviation influence 0.6%

E5 Influence factor Probe- and auxiliary probe resistance

E5 Deviation influence 10%

Test voltage 3.7 kV

Protection type IP 40; IEC/EN 60529

Electromagnetic compatibility

Emission IEC/EN 61326 Class B

Immunity IEC/EN 61326 Annex C

RE resistance measurement

Measuring method

Current-voltage measurement with improved cross-talk attenuation, no compensation of measuring lead resistance, with probe (3-pole) or without probe (2-pole), as per IEC/EN 61557-5

Open circuit voltage 23 to 24 V AC

Short circuit current > 50 mA AC

Measuring frequency 128 Hz

Maximum permissible overload

250 Veff

Measuring time 8 seconds (average from when START is pressed)

Limit input Tester retains set value even if instrument is turned off (assuming battery power supply is sufficient)

Automatic changeover of resolution

RH < 7 kΩ

Resolution 0.01 Ω

RH < 50 kΩ

Resolution 0.1 Ω

RH > 50 kΩ

Resolution 1 Ω

Interference voltage display DC + AC

Vmax 30 Veff

Common mode rejection

> 80 dB at 50 Hz and 60 Hz

Ri 680 kΩ

Measuring uncertainty < 10% for pure AC and DC signals

Measuring Range

0.15 Ω to 20 Ω

Resolution 0.01 Ω

Display range 0 to 19.99 Ω

200 Ω Resolution 0.1 Ω

Display range 20 to 199.9 Ω

2 kΩ Resolution 1 Ω

Display range 200 to 1999 Ω

Intrinsic uncertainty ±(6% of measured value + 5D)

Operating uncertainty

IEC 615573

±(18% of measured value + 5D)

Salient Characteristics for TB-6000A – Compact Network Test Platform

Compact, lightweight, and highly integrated platform Multi-layer network solution from physical to services layer Built-in VFL, power meter, LTS, ORL, talk set, and video inspection scope options Over 40 application modules available for physical test on single- and multi-mode fiber Multi-service capability for Ethernetand SONET/SDH tests Modular form factor enables field upgrade of test capabilities by adding or replacing

PIMs and optics on multi-services application module

Technical Specifications:

Environmental

Operating temperature range (no options) –20 to +50°C (–4 to 122°F) Operating temperature range (all options) 0 to +40°C (32 to 104°F) Storage temperature range –20 to +60°C (–4 to 140°F) Humidity, non-condensing 95%

Base unit optical interfaces (optional) power Meter Power level +10 to –55 dBm Calibrated wavelengths 850, 1310, and 1550 nm Connector type Universal push/pull (UPP)

Talk Set Wavelength 1550 nm Dynamic range >45 dB range Function With data/file transfer Laser safety Class 1M laser Connector type Field interchangeable

Optical Return loss Selectable wavelength 1310/1550 nm Measurement range 0 to 45 dB Measurement uncertainty ±1 dB Display resolution 0.01 dB

Visual Fault locator (VFl) Wavelength 635 nm ±15 nm Output power level <1 mW Laser safety Class 2 laser Connector type Universal push/pull (UPP)

Continuous wave (cw) light Source Wavelengths (selection) 1310, 1550, and 1625 nm Output power level –3.5 dBm

Stability in 15 min ±0.02 dB Stability in 8 hrs ±0.2 dB Laser safety Class 1M laser Connector type Field interchangeable

Video inspection Scope (via uSB) Magnification 250X and 400X, through the USB port

Display Touchscreen, TFT color, 8.4 in, LCD 800 x 600, high visibility

Storage and i/o interfaces Internal memory Minimum 1 GB 2x USB, 1x RJ45 Ethernet power Supply Battery type Standard removable Li-ion batteries AC/DC adapter Input 100-240 V, 50-60 Hz, Output 19 VDC/3.1 A Operation time Up to 11 hours with standard display, Telcordia GR-196-CORE (depending on the module)

Size and weight

Mainframe with one plug-in module and battery (L x H x W) 285 x 189 x 95 mm (11.22 x 7.44 x 3.74 in) Mainframe only (without battery and module) 2.4 kg (5.3 lb) Mainframe with one plug-in module and battery 3.4 kg (7.5 lb)

Salient Characteristics for 1101-015 – CRT Handle Set (with intercell clamp)

CRT HANDLE SET (WITH INTERCELL CLAMP)

Salient Characteristics for 1102-007-45 - 24" LIGHTED SPIKE PROBE -

45 DEGREE TIP NEW

24" LIGHTED SPIKE PROBE - 45 DEGREE TIP

Salient Characteristics for CPHSDATAV2 - DATACOMV2 DUAL WIDE PIM

Description:

Salient Characteristics for CB-21148994-002 - HI-SPEED V.24/EIA-530 D

Salient Characteristics for CB-21144332-002 - V.36 DTE/DCE Emulation Ring Indicate Cable 72 Inches Long Y Split 24 Inches

Cable for use with HST-3000: V.24/EIA-530 DTE/DCE Emulation Cable

Salient Characteristics for E8146A - MM-EF/SM 850/1300/1310/1550NM OTDR

Up to 50 dB dynamic range Integrated CW light source and broadband power meter (single-mode wavelengths) Single connector port for 1310, 1550, and in-service 1650 nm wavelengths Built-in encircled flux multimode source compliant with IEC 61280-1-4 and TIA-526-14-

B

ITEM

NUMBER

MODEL NOMENCLATURE TOTAL QTY

Requested

N9000B CXA Signal Analyzer, Multi-touch 13

002 FSM 70S Fusion Splicer Kit w/Cleaver & Battery 20

003 VFF5 Fiber Optic Cable Continuity Tester & Fault Finder 48

004 LRAT-2000 Copper Fiber Ethernet Network Test Kit 46

005 1T10G-1000 OneTouch AT 10G Network Assistant w/accessory kit consisting of OPVXG-SFP- PLUS-LR-C, SFP+-Transceiver, Base-LR, 1310nm

006 CIQ-FTKSFP Network Cable Qualification Tester w/accessory kit 17

007 701K Classic Tone and Probe Kit 42

008 OPVXG-10G OptiView XG Network Analyzer w/accessory kit consisting of OPVXG-SFP- PLUS-LR-C, SFP+-Transceiver, Base-LR, 009 OFP-100-QI OTDR Unit 17

010 OPVXG-SFP- PLUS-LR Optical Transceiver Module, SFP+, 10G BASE-LRM, 1310 Nm, Single-Mode 48

011 CRT-400 CRT-400 Cell Resistance Tester 12

012 5315A 25.5GHz Frequency Counter 3

013 E4146QUAD OTDR Module 10 014 E41OTDRPM OTDR Power Module 10 015 E41OTDRLS OTDR List Source Module 10 016 EUSTAD Universal Adapter 10 017 E40PMVFL Connector for Power Module/Visual Fault Locator 10

018 FLUKE-1621 KIT Earth Ground Tester Kit, 128 Hz, 250 VAC 6

019 TB-6000A Compact Network Test Platform 38

020 1101-015 CRT HANDLE SET (WITH INTERCELL CLAMP) 12

021 1102-007-45 24" LIGHTED SPIKE PROBE - 45 DEGREE TIP NEW 12

022 CTHSDATA HIGH SPEED DATACOM TEST OPTION – MSAM TB/MTS-6000A

SOFTWARE

023 CPHSDATAV2 DATACOMV2 DUAL WIDE PIM 38

024 CB-21148994-002 HI-SPEED V.24/EIA-530 D 38

025 CB-21144332-

V.36 DTE/DCE Emulation Ring Indicate Cable 72 Inches Long Y Split 24 Inches

026 E8146A MM-EF/SM 850/1300/1310/1550NM OTDR 38

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 13 Each N9000B CXA; Signal Analyzer, Multi-touch

FFP

N9000B CXA; Signal Analyzer, Multi-touch FOB: Destination

PURCHASE REQUEST NUMBER: 0011240618-0001

PSC CD: 6110

NET AMT

0002 20 Each FSM 70S; Fusion Splicer Kit w/Cleaver &

FFP

FSM 70S; Fusion Splicer Kit w/Cleaver & FOB: Destination

0003 48 Each VFF5; Fiber Optic Cable Continuity Teste

FFP

VFF5; Fiber Optic Cable Continuity Teste FOB: Destination

0004 46 Each LRAT-2000; Copper Fiber Ethernet Network

FFP

LRAT-2000; Copper Fiber Ethernet Network FOB: Destination

0005 24 Each 1T10G-1000; OneTouch AT 10G Network

FFP

1T10G-1000; OneTouch AT 10G Network FOB: Destination

0006 17 Each CIQ-FTKSFP; Network Cable Qualification

FFP

CIQ-FTKSFP; Network Cable Qualification FOB: Destination

0007 42 Each 701K, Classic Tone and Probe Kit

FFP

701K, Classic Tone and Probe Kit FOB: Destination

0008 24 Each OPVXG-10G, OptiView XG

FFP

OPVXG-10G, OptiView XG FOB: Destination

0009 17 Each OFP-100-QI, OTDR Unit

FFP

OFP-100-QI, OTDR Unit FOB: Destination

0010 48 Each OPVXG-SFP-PLUS-LR, Optical Transceiver M

FFP

OPVXG-SFP-PLUS-LR, Optical Transceiver M FOB: Destination

0011 12 Each CRT-400, Cell Resistance Tester

FFP

CRT-400, Cell Resistance Tester FOB: Destination

0012 3 Each 5315A, 25.5GHz Frequency Counter

FFP

5315A, 25.5GHz Frequency Counter FOB: Destination

0013 10 Each E4146QUAD, OTDR Module

FFP

E4146QUAD, OTDR Module FOB: Destination

0014 10 Each E41OTDRPM, OTDR Power Module

FFP

E41OTDRPM, OTDR Power Module FOB: Destination

0015 10 Each E41OTDRLS, OTDR List Source Module

FFP

E41OTDRLS, OTDR List Source Module FOB: Destination

0016 10 Each EUSTAD, Universal Adapter

FFP

EUSTAD, Universal Adapter FOB: Destination

0017 10 Each E40PMVFL, Connector for Power Module/VFF

FFP

E40PMVFL, Connector for Power Module/VFF FOB: Destination

0018 6 Each Fluke-1621 Kit, Earth Ground Tester Kit

FFP

Fluke-1621 Kit, Earth Ground Tester Kit FOB: Destination

0019 38 Each TB-6000A, Compact Network Test Platform

FFP

TB-6000A, Compact Network Test Platform FOB: Destination

0020 12 Each 1101-015, CRT Handle Set (W/intercell cl

FFP

1101-015, CRT Handle Set (W/intercell cl FOB: Destination

0021 12 Each 1102-007-45, 24" Lighted Spike Probe 45

FFP

1102-007-45, 24" Lighted Spike Probe 45 FOB: Destination

0022 38 Each

CTHSDATA

FFP

CTHSDATA

FOB: Destination

0023 38 Each

CPHSDATAV2

FFP

CPHSDATAV2

FOB: Destination

0024 38 Each CB-21148994-002, Hi-speed V.24/EIA-530 D

FFP

CB-21148994-002, Hi-speed V.24/EIA-530 D FOB: Destination

0025 38 Each

CB-21144332-002, V.36 DTE/DCE

FFP

CB-21144332-002, V.36 DTE/DCE

FOB: Destination

0026 38 Each E8146A

FFP

E8146A FOB: Destination

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 Destination Government Destination Government 0002 Destination N/A Destination Government 0003 Destination N/A Destination Government 0004 Destination N/A Destination Government 0005 Destination N/A Destination Government 0006 Destination N/A Destination Government 0007 Destination N/A Destination Government 0008 Destination N/A Destination Government 0009 Destination N/A Destination Government 0010 Destination N/A Destination Government 0011 Destination N/A Destination Government 0012 Destination N/A Destination Government 0013 Destination N/A Destination Government 0014 Destination N/A Destination Government 0015 Destination N/A Destination Government 0016 Destination N/A Destination Government 0017 Destination N/A Destination Government 0018 Destination N/A Destination Government 0019 Destination N/A Destination Government 0020 Destination N/A Destination Government 0021 Destination N/A Destination Government 0022 Destination N/A Destination Government 0023 Destination N/A Destination Government 0024 Destination N/A Destination Government 0025 Destination N/A Destination Government 0026 Destination N/A Destination Government

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

0001 30 dys. ADC 13 W6VF PM EQP ONLY-TMDE

W6VF PM EQP ONLY-TMDE

TMDE MISSION PBUSE RECORD ACCT

BLDG 61801 DOOR E19

FORT HUACHUCA AZ 85613-6000

520-538-7188 FOB: Destination

W81XD5

0002 30 dys. ADC 20 (SAME AS PREVIOUS LOCATION)

0003 30 dys. ADC 48 (SAME AS PREVIOUS LOCATION)

0004 30 dys. ADC 46 (SAME AS PREVIOUS LOCATION)

0005 30 dys. ADC 24 (SAME AS PREVIOUS LOCATION)

0006 30 dys. ADC 17 (SAME AS PREVIOUS LOCATION)

0007 30 dys. ADC 42 (SAME AS PREVIOUS LOCATION)

0008 30 dys. ADC 24 (SAME AS PREVIOUS LOCATION)

0009 30 dys. ADC 17 (SAME AS PREVIOUS LOCATION)

0010 30 dys. ADC 48 (SAME AS PREVIOUS LOCATION)

0011 30 dys. ADC 12 (SAME AS PREVIOUS LOCATION)

0012 30 dys. ADC 3 (SAME AS PREVIOUS LOCATION)

0013 30 dys. ADC 10 (SAME AS PREVIOUS LOCATION)

0014 30 dys. ADC 10 (SAME AS PREVIOUS LOCATION)

0015 30 dys. ADC 10 (SAME AS PREVIOUS LOCATION)

0016 30 dys. ADC 10 (SAME AS PREVIOUS LOCATION)

0017 30 dys. ADC 10 (SAME AS PREVIOUS LOCATION)

0018 30 dys. ADC 6 (SAME AS PREVIOUS LOCATION)

0019 30 dys. ADC 38 (SAME AS PREVIOUS LOCATION)

0020 30 dys. ADC 12 (SAME AS PREVIOUS LOCATION)

0021 30 dys. ADC 12 (SAME AS PREVIOUS LOCATION)

0022 30 dys. ADC 38 (SAME AS PREVIOUS LOCATION)

0023 30 dys. ADC 38 (SAME AS PREVIOUS LOCATION)

0024 30 dys. ADC 38 (SAME AS PREVIOUS LOCATION)

0025 30 dys. ADC 38 (SAME AS PREVIOUS LOCATION)

0026 30 dys. ADC 38 (SAME AS PREVIOUS LOCATION)

CLAUSES INCORPORATED BY REFERENCE

52.202-1 Definitions NOV 2013 52.204-7 System for Award Management OCT 2016 52.212-1 Instructions to Offerors--Commercial Items AUG 2018 52.212-4 Contract Terms and Conditions--Commercial Items JAN 2017 52.223-15 Energy Efficiency in Energy-Consuming Products DEC 2007 52.223-18 Encouraging Contractor Policies To Ban Text Messaging

While Driving

AUG 2011

52.232-39 Unenforceability of Unauthorized Obligations JUN 2013 52.232-40 Providing Accelerated Payments to Small Business

Subcontractors

DEC 2013

52.233-2 Service Of Protest SEP 2006 52.243-1 Changes--Fixed Price AUG 1987 52.247-34 F.O.B. Destination NOV 1991

252.203-7000 Requirements Relating to Compensation of Former DoD Officials

SEP 2011

252.203-7002 Requirement to Inform Employees of Whistleblower Rights SEP 2013 252.203-7005 Representation Relating to Compensation of Former DoD

Officials

NOV 2011

252.204-7003 Control Of Government Personnel Work Product APR 1992 252.204-7012 Safeguarding Covered Defense Information and Cyber

Incident Reporting

OCT 2016

252.205-7000 Provision Of Information To Cooperative Agreement Holders DEC 1991 252.225-7001 Buy American And Balance Of Payments Program-- Basic DEC 2017 252.232-7003 Electronic Submission of Payment Requests and Receiving

Reports

JUN 2012

252.232-7010 Levies on Contract Payments DEC 2006 252.243-7001 Pricing Of Contract Modifications DEC 1991 252.243-7002 Requests for Equitable Adjustment DEC 2012 252.247-7023 Transportation of Supplies by Sea APR 2014

CLAUSES INCORPORATED BY FULL TEXT

52.209-11 REPRESENTATION BY CORPORATIONS REGARDING DELINQUENT TAX LIABILITY OR A

FELONY CONVICTION UNDER ANY FEDERAL LAW (FEB 2016)

(a) As required by sections 744 and 745 of Division E of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235), and similar provisions, if contained in subsequent appropriations acts, the Government will not enter into a contract with any corporation that--

(1) Has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, where the awarding agency is aware of the unpaid tax liability, unless an agency has considered suspension or debarment of the corporation and made a determination that suspension or debarment is not necessary to protect the interests of the Government; or

(2) Was convicted of a felony criminal violation under any Federal law within the preceding 24 months, where the awarding agency is aware of the conviction, unless an agency has considered suspension or debarment of the corporation and made a determination that this action is not necessary to protect the interests of the Government.

(b) The Offeror represents that--

(1) It is [ ] is not [ ] a corporation that has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability; and

(2) It is [ ] is not [ ] a corporation that was convicted of a felony criminal violation under a Federal law within the preceding 24 months.

(End of provision)

52.211-6 BRAND NAME OR EQUAL (AUG 1999)

(a) If an item in this solicitation is identified as “brand name or equal,” the purchase description reflects the characteristics and level of quality that will satisfy the Government's needs. The salient physical, functional, or performance characteristics that “equal” products must meet are specified in the solicitation.

(b) To be considered for award, offers of “equal” products, including “equal” products of the brand name manufacturer, must--

(1) Meet the salient physical, functional, or performance characteristic specified in this solicitation;

(2) Clearly identify the item by--

(i) Brand name, if any; and

(ii) Make or model number;

(3) Include descriptive literature such as illustrations, drawings, or a clear reference to previously furnished descriptive data or information available to the Contracting Officer; and

(4) Clearly describe any modifications the offeror plans to make in a product to make it conform to the solicitation requirements. Mark any descriptive material to clearly show the modifications.

(c) The Contracting Officer will evaluate “equal” products on the basis of information furnished by the offeror or identified in the offer and reasonably available to the Contracting Officer. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer.

(d) Unless the offeror clearly indicates in its offer that the product being offered is an “equal” product, the offeror shall provide the brand name product referenced in the solicitation.

52.212-2 EVALUATION--COMMERCIAL ITEMS (OCT 2014)

(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:

As a result of this solicitation, the Government will award a Firm Fixed-Price contract on an ALL OR NONE basis to the lowest priced offeror who meets all the terms and conditions of the solicitation.

(b) Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s).

(c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS--COMMERCIAL ITEMS (AUG 2018)

The Offeror shall complete only paragraph (b) of this provision if the Offeror has completed the annual representations and certification electronically via the System for Award Management (SAM) Web site located at https://www.sam.gov/portal. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (u) of this provision.

(a) Definitions. As used in this provision --

“Economically disadvantaged women-owned small business (EDWOSB) Concern” means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127. It automatically qualifies as a women-owned small business eligible under the WOSB Program.

"Forced or indentured child labor" means all work or service-

(1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or

(2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties.

“Highest-level owner” means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner.

“Immediate owner” means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: Ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees.

“Inverted domestic corporation” means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c).

“Manufactured end product” means any end product in product and service codes (PSCs) 1000-9999, except--

(1) PSC 5510, Lumber and Related Basic Wood Materials;

(2) Product or Service Group (PSG) 87, Agricultural Supplies;

(3) PSG 88, Live Animals;

(4) PSG 89, Subsistence;

(5) PSC 9410, Crude Grades of Plant Materials;

(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;

(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;

(8) PSC 9610, Ores;

(9) PSC 9620, Minerals, Natural and Synthetic; and

(10) PSC 9630, Additive Metal Materials.

“Place of manufacture” means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.

“Predecessor” means an entity that is replaced by a successor and includes any predecessors of the predecessor.

“Restricted business operations” means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate--

(1) Are conducted under contract directly and exclusively with the regional government of southern Sudan;

(2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization;

(3) Consist of providing goods or services to marginalized populations of Sudan;

(4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization;

(5) Consist of providing goods or services that are used only to promote health or education; or

(6) Have been voluntarily suspended.

“Sensitive technology”--

(1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically--

(i) To restrict the free flow of unbiased information in Iran; or

(ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and

(2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3) of the International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3)).

“Service-disabled veteran-owned small business concern”--

(1) Means a small business concern--

(i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and

(ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran.

(2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16).

“Small business concern” means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR Part 121 and size standards in this solicitation.

“Small disadvantaged business concern”, consistent with 13 CFR 124.1002, means a small business concern under the size standard applicable to the acquisition, that--

(1) Is at least 51 percent unconditionally and directly owned (as defined at 13 CFR 124.105) by--

(i) One or more socially disadvantaged (as defined at 13 CFR 124.103) and economically disadvantaged (as defined at 13 CFR 124.104) individuals who are citizens of the United States; and

(ii) Each individual claiming economic disadvantage has a net worth not exceeding $750,000 after taking into account the applicable exclusions set forth at 13 CFR 124.104(c)(2); and

(2) The management and daily business operations of which are controlled (as defined at 13.CFR 124.106) by individuals, who meet the criteria in paragraphs (1)(i) and (ii) of this definition.

“Subsidiary” means an entity in which more than 50 percent of the entity is owned--

(1) Directly by a parent corporation; or

(2) Through another subsidiary of a parent corporation.

“Successor” means an entity that has replaced a predecessor by acquiring the assets and carrying out the affairs of the predecessor under a new name (often through acquisition or merger). The term “successor” does not include new offices/divisions of the same company or a company that only changes its name.

The extent of the responsibility of the successor for the liabilities of the predecessor may vary, depending on State law and specific circumstances.

“Veteran-owned small business concern” means a small business concern--

(1) Not less than 51 percent of which is owned by one or more veterans (as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and

(2) The management and daily business operations of which are controlled by one or more veterans.

"Women-owned business concern" means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of the stock of which is owned by one or more women; and whose management and daily business operations are controlled by one or more women.

“Women-owned small business concern” means a small business concern--

(…