A07_-_W91RUS-18-R-DE99-0001.pdf

0011240618-0001

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

14.1 This amendment addresses Question & Answ ers received as part of Q&A Period

14.2 All Offerors must sign & acknow ledge receipt of amendment and its impact (if any) on quote.

14.3 Salient Characteristics w ere changed as annotated in yellow highlights.

14.4 Offerors must correlate each line of quote to a CLIN/SLIN on the solicitation to provide information needed to provide technical acceptance.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 30

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 21-Sep-2018

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X W91RUS18RDE99

X 9B. DATED (SEE ITEM 11)

19-Sep-2018

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

21-Sep-2018

CODE

ACC-APG

2133 CUSHING ST

BLDG 61801 RM 3410

FORT HUACHUCA AZ 85613

W91RUS 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

W91RUS18RDE99

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 30 - BLOCK 14 CONTINUATION PAGE

The following have been added by full text:

Q&A W91RUS-18-R-DE99 // TMDE Purchase // Q&A

1. Some items were deemed needed as part of the TB6000A configuration ‐ should these be included in CLIN 19 as part of the TB6000A price or are they not being purchased? (These items have their own pricing, which we can bundle into CLIN 19 but they are separate items)

a. E80PMVFL

b. CTCDI

c. CPCDIV2

d. EULCADS‐APC

ANSWER: These items are needed and will be added as NSP SLINS under CLIN 19. CLIN 19 should include all costs associated with these items. (They appear as 019A‐D on the Salient Characteristics List)

2. For the T‐Berd 4000 items to work (CLIN 13‐17) there must also be a mainframe included ‐ that is part number ETB4000T. What line should we include this price on? Line 13?

ANSWER: This item is needed for the configuration requested and should be priced as part of CLIN 13 but a NSP SLIN will be added. (It appears as 013A on the Salient Characteristics List)

SECTION SF 1449 - CONTINUATION SHEET

SUPPLIES OR SERVICES AND PRICES

SUBCLIN 001301 is added as follows:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

001301 ETB4000T – Multiple Services Test Platfo

FFP

Component of CLIN 0013. Any price associated with this should be captured in

CLIN 0013.

NET AMT

SUBCLIN 001901 is added as follows:

001901 Power Meter and VFL Option E80PMVFL

FFP

Component of CLIN 0019. Any price associated with this should be captured in

CLIN 0019.

SUBCLIN 001902 is added as follows:

001902 CTCDI – Diphase Test Option – MSAM TB/MT

FFP

CTCDI – Diphase Test Option – MSAM TB/MTS-6000A Software. Component of CLIN 0019. Any price associated with this should be captured in CLIN 0019.

SUBCLIN 001903 is added as follows:

001903 CPCDIV2 – Diphase Dual Wide PIM

FFP

SUBCLIN 001904 is added as follows:

001904 EULCADS-APC – Universal Adapter FO

FFP

INSPECTION AND ACCEPTANCE

The following Acceptance/Inspection Schedule was added for SUBCLIN 001301:

INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

N/A N/A N/A N/A

The following Acceptance/Inspection Schedule was added for SUBCLIN 001901:

The following Acceptance/Inspection Schedule was added for SUBCLIN 001902:

The following Acceptance/Inspection Schedule was added for SUBCLIN 001903:

The following Acceptance/Inspection Schedule was added for SUBCLIN 001904:

The following have been modified:

SALIENT CHARACTERISTICS

0001 Salient Characteristics for N9000B CXA Signal Analyzer - Signal Analyzer, Multi-touch

Key Features: Measurement capabilities include general-purpose spectrum analysis and one-button PowerSuite measurements. The optional built-in tracking generator1 provides a fast and cost-effective solution for scalar network analysis. The additional 75 Ω input connector helps make an easy cable TV signal measurement. For greater flexibility, you can quickly configure—and reconfigure—the CXA with more than 25 of software applications for specific measurements including analog demodulation, digital video, and wireless connectivity. Licensing upgrades make transitions fast and easy.

Technical Specifications:

Frequency 9 kHz to 26.5 GHz

Frequency Options 3, 7.5, 13.6, 26.5 GHz

Maximum Analysis Bandwidth 25 MHz

Bandwidth Options 10 standard, 25 MHz

Maximum Real-Time Bandwidth n/a

Real-Time Bandwidth Options n/a

DANL @1 GHz -163 dBm

Phase Noise @1 GHz (10 kHz offset) -110 dBc/Hz

Phase Noise @1 GHz (30 kHz offset) n/a

Phase Noise @1 GHz (1 MHz offset) -130 dBc/Hz

Overall Amplitude Accuracy ±0.5 dB

TOI @1 GHz (3rd Order Intercept) +17 dBm

Maximum Dynamic Range 3rd Order @1 GHz

111 dB

Applications-General Purpose

89600 VSA Software Analog Demodulation

MATLAB

Noise Figure Phase Noise Pulse

Stimulus Response

EMI

Vector Modulation Analysis

Applications-Cellular

GSM/EDGE

LTE/LTE-Advanced

W-CDMA/HSPA/HSPA+

NB-IoT

Applications-Wireless Connectivity

Short Range Communications (ZigBee, Z- Wave)

Bluetooth® (BR/EDR/LE4.2/5.0) WLAN 802.11(a/b/g/j/p/n/ac/af/ah/ax)

Applications-Digital Video n/a

Performance Level ◆◆◇◇◇◇

Standard Attenuator Range 50 dB

Standard Attenuator Step 10 dB

Minimum Duration for 100% Probability of Intercept n/a

Detectable Signal Duration w/Signal to Mask >60 dB n/a

Spur Free Dynamic Range n/a

Multi-Domain Bandwidth n/a

Display Views n/a

Triggering

Level RF Burst Line External Periodic

Applications with Frequency Mask Trigger n/a

DANL @2 GHz, No Preamplifier n/a

DANL @10 GHz, No Preamplifier -142 dBm/Hz

Applications Available Yes

0002 Salient Characteristics for FSM 70S Cable Analyzer - Fusion Splicer Kit w/Cleaver & Battery

Key Features:

Bluetooth wireless communication Automated and programmable wind protector 13-second automated tube heater Fully ruggedized for shock, dust and moisture Li-ion battery with 200 splices/shrinks per charge 5 mm cleave length for splice on connector or small package needs Sheath clamp or fiber holder operation On-board training and support videos Multi-function transit case with integrated workstation

Technical Specifications:

Applicable type of fibres SM (ITU-T G.652 and G657), MM (ITU-T G.651), DS (ITU -T

G.653), NZDS (ITU-T G.655)

Fibre count Single Applicable fibre dimensions Cladding diameter: 80 to 150μm. Coating diameter: 100 to

1000μm Cleaved length 5mm to 16mm Splicing modes Total 100 modes Typical splice loss 0.02dB with SM, 0.01dB with MM, 0.04dB with DS and 0.04dB with NZDS (measured by cut-back method relevant to ITU-T & IEC standard)

Return loss >>60dB Splicing time Typical 7sec. with SM FAST, 12sec. with SM AUTO and 15sec with AUTO modes with standard SM (ITU-T G.652) Splice loss estimate Available using dual camera, core alignment data Attenuation splice function Intentional high splice loss of 0.1dB to 15dB (0.1dB step) can be made for an in-line fixed attenuator Tube heater/heating time Built-in tube heater with 30 heating modes/Typical 14sec with

Fujikura FP-03 Applicable protection sleeve 60mm, 40mm and micro series Storage of splice result The last 2000 results to be stored in the internal memory Tension test 1.96 to 2.25N Operating condition 0 to 5,000m above sea level, 0 to 95%RH and -10 to 50 deg C and up to 15m/s wind velocity, respectively Storage condition 0 to 95%RH (non dew),short term storage -40 to 80°C, long term storage with battery: -20 to 30°C Dimensions 146W × 159D × 150H (mm) Weight 2.5kg with AC adaptor, 2.7kg with battery Viewing method and display Dual cameras with 4.73” colour LCD monitor Fibre view and magnification X/Y (320X magnification), or both X and Y simultaneously (200X magnification) Power supply Applicable voltage from 100 to 240V AC or 10 to 15V DC with

ADC-18. 14.8V DC with BTR-09 No. of splice cycles with battery Typical 200 cycles (splice/splice protector heat) with BTR-09 Electrode life 3000 arc-discharges.

Connectivity USB 1.1 (Mini-B type) connector for PC communication. 6-pin

Mini-DIN connector for HJS-02, HJS-03 or SH-8C power supply

0003 Salient Characteristics for VFF5 – Fiber Optic Cable Continuity Tester & Fault Finder

Finds Breaks, Faulty Splices and Crimps Poor Components or Connections Low-Cost, Basic Fiber Test Tool High Output, Class 2, 670nm Laser Diode Includes Carrying Case, Lens Cap, Batteries, Lanyard, and Instruction Sheet, Rugged, Metal Housing

Technical Specifications:

Light source: Class II laser diode Central wavelength: 650nm/±10nm Spectral width (FWHM): <5nm Laser light pulse duration: Continuous in CW mode 600ms in 1Hz modulation mode Environment: Operation: -10°C to +50°C,0 to 95%RH (non-condensing) Storage: -20°C to +80°C, 0 to 95%RH (non-condensing) Power supply: Two 1.5V AA Alkaline batteries Dimension and weight (w/ batteries): Length: 203mm with ST dust cap Connector: Diameter: 22mm Battery life: Approximate weight: 230g Weight (w/o batteries): 2.5mm universal Length: >80 hours Diameter: 0.30lbs/136g 8.7in/220mm 1.25in/32mm Included Accessories: Includes holster, integrated rubber port cover, lanyard, cell-phone style belt clip, instruction sheet and batteries

0004 Salient Characteristics for LRAT-2000 - Network Auto Tester

Multiple user-configured AutoTests Cable length measurement, fault location and fault type TruePower™ Power over Ethernet (PoE) measurement Ethernet speed and duplex verification at 10/100/Gigabit rates Twisted pair and fiber-optic link testing Nearest switch identification DHCP, DNS and Gateway connectivity tests Ping and TCP port connectivity tests to up to 10 user-selected targets Results saved on the tester or uploaded to the Link-Live Cloud Service with zero-touch Results, project and staff management using the Link-Live Cloud Service Packet reflection at rates up to 1 Gbps

0005 Salient Characteristics for 1T10G-1000 - OneTouch AT 10G Network Assistant w/accessory kit

Key Features: The NETSCOUT OneTouch AT 10G Network Assistant is an automated 10-Gigabit Ethernet troubleshooting and performance measurement tester. Troubleshoots common problems, or proves that the network is not at fault, by emulating a client device and measuring the end user experience. Measures end-to-end path performance within the LAN or data center to validate SLA compliance and ensure infrastructure readiness for application delivery. AutoTests profile streamline testing and promotes best practices. Uploads sequential AutoTest results to the companion cloud service to troubleshoot intermittent problems and optimize performance. Discovers networked devices, key attributes, connection paths and problems. Provides the ability to manage the tester remotely.

Technical Specification:

Cable Types: CAT3 , CAT4 , CAT5 , CAT5e , CAT6

Compliant Standards: CAN/CSA-C22.2 No. 61010-1-04 , EN 61326-1:2006 , IEC 61010- 1:2001

Connectors: RJ-45 , SFP+

Device Type: Network tester kit

Included Accessories: 1000BASE-SX transceiver , 10G-SR SFP+ transceiver , AC power adapter , Carrying case , Carrying strap , Hand strap , SD card

Kit Content: OneTouch AT 10G Module , Test frame

Media: Copper , Fiber

Test Standards: ISO/IEC 11801 Class C , ISO/IEC 11801 Class D , ISO/IEC 11801 Class E , ISO/IEC 11801 Class F

Power Input Voltage: 100-240 V

Shock & Vibration Tolerance Shock And Vibration Standards:

MIL-PRF-28800F: Class 3

0006 Salient Characteristics for CIQ-FTKSFP - Network Cable Qualification Tester w/accessory kit

Key Features: Determines if your existing cabling has the bandwidth to support voice, 10/100, VoIP or Gigabit Ethernet. Provides the ability to show why existing cabling cannot support the network's bandwidth requirement. Detects what's at the end of any cable and displays device configuration (speed/duplex/pairing). Graphically maps wiring configuration and shows distance to faults with Intelligent Wiremap. The fiber optic cable test kit with SimpliFiber Pro meter measures power and loss for verification of cabling in fiber networks.

Cable Types Supported: UTP, STP, FTP, SSTP, RG6, RG59, audio and security Qualification Autotests: 1000BASE-T, 100BASE-TX, 10BASE-T, VoIP, 1394b S100, TELCO, Wiremap only, Coax Supported Tests: Wiremap, length, cable signal performance, digital toner, analog toner, Ethernet port detection and identification, analog telephone detection, blink port light, continuity, speaker test, cable fault finding, video signal detection.

Wiremap: Can detect single wire faults and supports MultiMap mode with up to seven remote office identifiers. Draws proportional wire length to breaks. Detects split pairs.

Find fault: Measures crosstalk and impedance and compares against appropriate limits based on qualification test selected. Detects location of large point sources as well as distributed sources in the cabling if they are sufficient to disqualify the application

Results Storage: Up to 250 qualification test results

Power: Battery type: 4 AA (NEDA 15A, IEC LR6) alkaline batteries

Battery Life: 20 hours of typical use, without backlight

Other Battery Types Supported: 4AA photo lithium, NIHM, NICAD

Dimensions and Weight: 7in x 3.5in x 1.75in (17.8cm x 8.9cm x 4.5cm) 1.2 lb (0.55 kg)

0007 Salient Characteristics for 701K - Classic Tone and Probe Kit

Key Features: Uses two distinct tone signatures to trace telephone, data, and security cables. LED brightness indicates received signal strength. Three listening modes: speaker, headset, or butt-in telephone. Enhanced voltage protection (up to 150 V DC).

Technical Specifications:

Gain (nominal): 30 db Input Impedance (nominal): 100 MΩ Metal Tip Resistance: 0Ω Plastic Tip Resistance: 300Ω Headset: 3.5 mm sterio plug; 8 ohms minimum Battery: One 9 VDC (NEDA 1604, JIS 006P, or IEC 6LR61) Battery Life (nominal): >50 hours Length: 231 mm (9.0”) Width: 55 mm (2.2”) Depth: 28 mm (1.1”) Weight: 145 g (5.2 oz) Operating/Storage Temperature: 0 °C to 50°C (32 °F to 122 °F) Tone Specifications (77HP-G/6A) Talk Battery (into 600Ω): 4.6 VDC Output Power (into 600Ω): +10 d Bm Resistive Short Visual Indication: <10 kΩ Resistive Short Audio Indication:<200Ω Output Frequency (nominal) Alternating-890/960 Hz Warbling-Slow: 1.3 Hz/Fast: 6 Hz Voltage Protection (into 600Ω): 150 VDC Battery: 9 VDC (NEDA 1604, JIS 006P, or IEC 6LF61) Battery Life: >50 hours Length: 32 mm (1.25”) Width: 64 mm (2.5”) Height: 57 mm (2.25”) Weight (max): 128 g (4.5 oz.)

Operating Temperature: 0 °C to 50 °C (32 °F to 122 °F) Storage Temperature: -50 °C to 75 °C (-58 °F to 167 °F)

0008 Salient Characteristics for OPVXG-10G – OptiView XG Network Analyzer w/accessory kit consisting of OPVXG-SFP-PLUS-LR-C, SFP+-Transceiver, Base-LR, 1310Nm

Key Features: OptiView XG is a network engineer's tablet with dedicated custom hardware for automated network and application analysis in the deployment and troubleshooting of new technologies. It's at home in the data center with support for 10 GbE and virtualized servers; at the users' office supporting 802.11n and application analysis; and with the switches and routers in between.

Use it to find problems from your desk or take it - with the data it has collected - to the trouble spot for first-hand analysis. Its unique troubleshooting system is based on proactive monitoring and analysis, graphical path analysis, and application-centric analysis, which provides expert guidance that automatically identifies the root cause of problems.

Technical Specifications:

Battery Included Qty:

Run Time (Up To): 2 hour(s) Technology: Lithium ion Environmental Parameters Max Altitude Operating:

15090 ft

Max Operating Temperature:

86 °F

Max Storage Temperature:

140 °F

Min Operating Temperature: f

50 °F

Min Storage Temperature:

-40 °F

Header Brand: NetScout Manufacturer: NETSCOUT Model: XG Network Analysis Tablet, 10 Gbps Packaged Quantity: 1 Dimensions & Weight Depth: 2 in Height: 9.4 in Weight: 5.51 lbs Width: 12.4 in Display Color Support: Color Display Resolution: 1024 x 768 pixels Features: Backlight , Touch-screen Technology: LCD Network Tester Cable Types: UTP Compliant Standards:

EN 61010-1 2nd edition

Connectors: RJ-45 x 2 , SFP , SFP+ Device Type: Network tester Features: USB connectivity Included Accessories:

2 x carrying straps , AC power adapter , Soft case , USB flash drive

Media: Copper , Fiber , Radio Tests, Tools and Measurements:

IEEE 802.11 a/b/g/n discovery , Network element discovery

Power Input Voltage: 100-240 V Output Voltage: 19 V

0009 Salient Characteristics for OFP-100-QI - OTDR

Smartphone, "gesture-based" interface that allows anyone to perform expert fiber testing with maximum efficiency

Fastest trace time at 2 seconds per wavelength to accelerate fiber certification and troubleshooting

Ultra-short dead zones to analyze datacenter fibers with short fiber patch cables and dense connectors

"DataCenter OTDR" configuration to effectively test datacenter fiber with minimal set-up and trace time

Graphical EventMap view greatly simplifies the interpretation of OTDR trace results Project management capability enables efficient job and user assignments and tracks project progress with pass/fail results Enhanced productivity with the fastest trace times, one-button set ups and integrated reporting Maximized operator efficiency with task-focused, simplified usability Increased reliability of all high-bandwidth networks

FiberInspector probe specification Magnification ~ 200X with OptiFiber Pro Display Light source Blue LED Power source TFS mainframe

Field of View (FOV) Horizontal: 425 µm Vertical: 320 µm

Minimum detectable particle size

0.5 µm

Dimensions Approximately 6.75 in x 1.5 in (1175 mm x 35 mm) without adapter tip

Weight 200 g

Temperature range Operating: 32°F to 122°F (0 °C to +50 °C) Storage: -4°F to +158°F (-20°C to +70°C)

Certifications 200 g VFL specifications On/Off control Mechanical switch and a button on the touch screen Output power 316 µW (-5 dBm) = peak power = 1.0 mW (0 dBm) Operating wavelength 650 nm nominal Spectral width (RMS) ±3 nm Output modes Continuous wave Pulsed mode (2 Hz to 3 Hz blink frequency) Connector adapter 2.5 mm universal Laser safety (classification) Class II CDRH Complies to EN 60825-2 General specifications Weight Mainframe with module and battery: 3 lbs, 5 oz (1.28 kg)

Dimensions Mainframe with module and battery: 2.625 in x 5.25 in x 11.0 in (

6.67 cm x 13.33 cm x 27.94 cm)

Battery Lithium ion battery pack, 7.2 volts

Battery life Eight hour Auto OTDR operation, dual wavelength, no video probe connected, 150 m of fiber

Charge Time Tester Off Four hours to charge from 10% to 90% capacity Tester On Six hours to charge from 10% to 90% capacity with the tester on Environmental specifications Operating temperature* -18°C to 458°C

Non-operating temperature -30°C to 60°C

Operating altitude 4,000 m (13123 ft) 3200 m (10,500 ft) with ac adapter

Storage altitude 12,000 m

EMC EN 61326-1

0010 Salient Characteristics for OPVXG-SFP-PLUS-LR – Optical Transceiver Module, SFP+, 10G Base-LRM, 1310 Nm, Single Mode

Key Features:

Single Mode Optical Transceiver Module

SFP+

10G BASE-LR

1310 nm

Optical Transceiver Module, Sfp+, 10gbase-Lr, 1310nm, Single Mode

0011 Salient Characteristics for CRT-400 - Cell Resistance Tester

Handheld battery cell resistance tester Displays and records information Allows transfer of readings to a PC for analysis and report generation Patented Resistance Test Method USB capabilities

Mouting Handheld User Interface Battery Analysis Software (BAS) Power Input AC Adapter Input, Voltage = 90 – 264 VAC Ports USB Height (in/mm) 12in./305mm Width (in/mm) 7in/178mm Depth (in/mm) 3in/76mm Weight (lbs/kgs) 3.4lbs/1.5kg

0012 Salient Characteristics for 5315A - 26.5 GHz Frequency Counter

Ultra-wideband, single input from 50 MHz to 26.5 GHz Simultaneous frequency and power measurement with analog peaking indicator Accuracy: +/-1 LSD +/- residual stability +/-(timebase error x frequency) GPIB and RS-232 interfaces standard

0013 Salient Characteristics for E4146QUAD – OTDR Module

• Integrated singlemode and multimode CW Light source and Broadband Power Meter

• TIA/IEC pass/fail thresholds

• Propagation delay measurement in multimode (TIA-568-C)

• Optimized for testing 10MB to 40GigE

• Enables Tier 2 certification of Premises networks

• For Tier 1 Fiber Certification, see the JDSU Certifier40G

• IEC 61280-4-1 compliant using an external mode conditioner

Dynamic range of 26/24dB (MM) and 37/35dB (SM)

001301 Salient characteristics for ETB4000T – Multiple Services Test Platform

Lightweight platform: only 1.4kg/3 lbs Intuitive graphical user interface with touchscreen option Extended battery life using smart Lithium ion cell Scripting capability for automation, simplification and automatic data reporting Easy Internet access via installed web browser Remote control access allowing remote assistance from any expert user Integration of basic applications such as HTML and PDF reader

0014 Salient Characteristics for E41OTDRPM – OTDR Power Module

Power Meter Option (through SM and MM OTDR Ports) (Not the Base Unit) Wavelengths: Multimode 850/1300 nm, Single-mode 1310/1490/1550/1625/1650 nm Output Power Level: -3 to -30 dBm, -2 to -50 dBm

0015 Salient Characteristics for E41OTDRLS – OTDR List Source Module

Light Source Option (through SM and MM OTDR Ports) Wavelengths: Multimode 850/1300 nm, Single-mode 1310/1550 nm Output Power Level: -3.5 dBm (CW), -6.5 dBm (Modulated)

0016 Salient Characteristics for EUSTAD – Universal Adapter

0017 Salient Characteristics for E40PMVFL – Connector for Power Module/Visual Fault Locator

Compact, ergonomic design for ultimate portability Visible wavelength is 650 nm High powered laser (1 mW) for single-mode (> 7 km) and multimode (> 5 km) connectors Continuous or Flash illumination Universal connector interface for quick and easy connection

2.5 mm connector input (1.25 mm adapter available)

0018 Salient Characteristics for Fluke-1621 Kit – Earth Ground Tester Kit, 128 Hz, 250 VAC

3-pole Fall-of-Potential earth testing for basic measurements 2-pole resistance measurements for added versatility Easily capture values with single-button operation Ensure accurate measurements with automatic ‘noise’ voltage detection Hazardous voltage warning offers increased user protection Clearly read and record data with a large, backlit display Hard carrying case Rugged holster and design for tough work environments Portable size allows for easy transportation Instantly be alerted to measurements outside of your set limit, when you use the adjustable limit setting 600 V Cat II

Technical Specification:

Measuring functions 3-pole earth ground resistance, 2-pole AC resistance of a conductor, Interference voltage

Intrinsic error Refers to the reference temperature range and is guaranteed for one year

Measuring rate 2 measurements/second

Battery1 One 9 volt alkaline (LR61)

Battery condition LO-BAT is displayed if voltage drops below 6.5 V

Voltages

Between jacks H/C2 and E/C1

250 Veff maximum (effective voltage)

Between jacks S/P2 and E/C1

250 Veff maximum

Climatic class VDE/VDI 3540 RZ (conforming to KWG as per DIN 40040, 4/87)

Temperature performance2

Working -10°C to +50°C (+14°F to +122°F)

Operating 0°C to +35°C (+32°F to +95°F)

Storage -20°C to +60°C (+68°F to +140°F)

Reference +23°C ±2°C (+73°F ±4°F)

Temperature coefficient

±0.1% of range per degree Kelvin

Safety IEC/EN 61010-1, 600 V CAT II, pollution degree 2

Dimensions 113 x 54 x 216 mm (4.5 x 2.1 x 8.5 in), including holster

Weight 850 g (1.9 lb), including standard accessories, volume approximately 600 cm3

Electrical Specifications

Maximum deviations

E1 Influence factor Position

E1 Deviation influence 0%

E2 Influence factor Supply voltage

E2 Deviation influence 0%

E3 Influence factor Temperature E3

E3 Deviation influence 2.3%

E4 Influence factor Serial interference voltage (20 V)

E4 Deviation influence 0.6%

E5 Influence factor Probe- and auxiliary probe resistance

E5 Deviation influence 10%

Test voltage 3.7 kV

Protection type IP 40; IEC/EN 60529

Electromagnetic compatibility

Emission IEC/EN 61326 Class B

Immunity IEC/EN 61326 Annex C

RE resistance measurement

Measuring method

Current-voltage measurement with improved cross-talk attenuation, no compensation of measuring lead resistance, with probe (3-pole) or without probe (2-pole), as per IEC/EN 61557-5

Open circuit voltage 23 to 24 V AC

Short circuit current > 50 mA AC

Measuring frequency 128 Hz

Maximum permissible overload

250 Veff

Measuring time 8 seconds (average from when START is pressed)

Limit input Tester retains set value even if instrument is turned off (assuming battery power supply is sufficient)

Automatic changeover of resolution

RH < 7 kΩ

Resolution 0.01 Ω

RH < 50 kΩ

Resolution 0.1 Ω

RH > 50 kΩ

Resolution 1 Ω

Interference voltage display DC + AC

Vmax 30 Veff

Common mode rejection

> 80 dB at 50 Hz and 60 Hz

Ri 680 kΩ

Measuring uncertainty < 10% for pure AC and DC signals

Measuring Range

0.15 Ω to 20 Ω

Resolution 0.01 Ω

Display range 0 to 19.99 Ω

200 Ω Resolution 0.1 Ω

Display range 20 to 199.9 Ω

2 kΩ Resolution 1 Ω

Display range 200 to 1999 Ω

Intrinsic uncertainty ±(6% of measured value + 5D)

Operating uncertainty

IEC 615573

±(18% of measured value + 5D)

0019 Salient Characteristics for TB6000AV2-OC192-10GE-DTG – Compact Network Test Platform

Compact, lightweight, and highly integrated platform Multi-layer network solution from physical to services layer Built-in VFL, power meter, LTS, ORL, talk set, and video inspection scope options Over 40 application modules available for physical test on single- and multi-mode fiber Multi-service capability for Ethernetand SONET/SDH tests Modular form factor enables field upgrade of test capabilities by adding or replacing

PIMs and optics on multi-services application module

Technical Specifications:

Environmental

Operating temperature range (no options) –20 to +50°C (–4 to 122°F) Operating temperature range (all options) 0 to +40°C (32 to 104°F) Storage temperature range –20 to +60°C (–4 to 140°F) Humidity, non-condensing 95%

Base unit optical interfaces (optional) power Meter Power level +10 to –55 dBm Calibrated wavelengths 850, 1310, and 1550 nm Connector type Universal push/pull (UPP)

Talk Set Wavelength 1550 nm Dynamic range >45 dB range Function With data/file transfer Laser safety Class 1M laser Connector type Field interchangeable

Optical Return loss Selectable wavelength 1310/1550 nm Measurement range 0 to 45 dB Measurement uncertainty ±1 dB Display resolution 0.01 dB

Visual Fault locator (VFl) Wavelength 635 nm ±15 nm Output power level <1 mW Laser safety Class 2 laser Connector type Universal push/pull (UPP)

Continuous wave (cw) light Source Wavelengths (selection) 1310, 1550, and 1625 nm Output power level –3.5 dBm Stability in 15 min ±0.02 dB Stability in 8 hrs ±0.2 dB Laser safety Class 1M laser Connector type Field interchangeable

Video inspection Scope (via uSB) Magnification 250X and 400X, through the USB port

Display Touchscreen, TFT color, 8.4 in, LCD 800 x 600, high visibility

Storage and i/o interfaces Internal memory Minimum 1 GB

2x USB, 1x RJ45 Ethernet power Supply

Battery type Standard removable Li-ion batteries AC/DC adapter Input 100-240 V, 50-60 Hz, Output 19 VDC/3.1 A Operation time Up to 11 hours with standard display, Telcordia GR-196-CORE (depending on the module)

Size and weight

Mainframe with one plug-in module and battery (L x H x W) 285 x 189 x 95 mm (11.22 x 7.44 x 3.74 in) Mainframe only (without battery and module) 2.4 kg (5.3 lb) Mainframe with one plug-in module and battery 3.4 kg (7.5 lb)

001901 Salient Characteristics for E80PMVFL –

Description:

Power Meter and VFL Option

001902 See salient characteristics for CTCDI – Diphase Test Option – MSAM TB/MTS-6000A Software

Diphase Test Option - MSAM TB/MTS-6000A Software

001903 Salient characteristics for CPCDIV2 – Diphase Dual Wide PIM

Diphase Dual Wide PIM

001904 Salient characteristics for EULCADS-APC – Universal Adapter FO

Universal Adapter FO

020 Salient Characteristics for 1101-015 – CRT Handle Set (with intercell clamp)

CRT HANDLE SET (WITH INTERCELL CLAMP)

021 Salient Characteristics for 1102-007-45 - 24" LIGHTED SPIKE PROBE -

45 DEGREE TIP NEW

24" LIGHTED SPIKE PROBE - 45 DEGREE TIP

023 Salient Characteristics for CPHSDATAV2 - DATACOMV2 DUAL WIDE PIM

DATACOMV2 DUAL WIDE PIM

024 Salient Characteristics for CB-21148994-002 - HI-SPEED V.24/EIA-530 D

HI-SPEED V.24/EIA-530 D

025 Salient Characteristics for CB-21144332-002 - V.36 DTE/DCE Emulation Ring Indicate Cable 72 Inches Long Y Split 24 Inches

Cable for use with HST-3000: V.24/EIA-530 DTE/DCE Emulation Cable

026 Salient Characteristics for E8146A - MM-EF/SM 850/1300/1310/1550NM OTDR

Up to 50 dB dynamic range Integrated CW light source and broadband power meter (single-mode wavelengths) Single connector port for 1310, 1550, and in-service 1650 nm wavelengths Built-in encircled flux multimode source compliant with IEC 61280-1-4 and TIA-526-14-

B

ITEM MODEL NOMENCLATURE QTY

Requested

N9000B CXA Signal Analyzer, Multi-touch 13

002 FSM 70S Fusion Splicer Kit w/Cleaver & Battery 20

003 VFF5 Fiber Optic Cable Continuity Tester & Fault Finder 48

004 LRAT-2000 Copper Fiber Ethernet Network Test Kit 46

005 1T10G-1000 OneTouch AT 10G Network Assistant w/accessory kit consisting of OPVXG- SFP- PLUS-LR-C, SFP+-Transceiver, Base-LR, 1310nm

006 CIQ-FTKSFP Network Cable Qualification Tester w/accessory kit 17

007 701K Classic Tone and Probe Kit 42

008 OPVXG-10G OptiView XG Network Analyzer w/accessory kit consisting of OPVXG-SFP- PLUS-LR-C, SFP+-Transceiver, Base-LR, 009 OFP-100-QI OTDR Unit 17

010 OPVXG-SFP- PLUS-LR Optical Transceiver Module, SFP+, 10G BASE-LRM, 1310 Nm, Single-Mode 48

011 CRT-400 CRT-400 Cell Resistance Tester 12

012 5315A 25.5GHz Frequency Counter 3

013 E4146QUAD OTDR Module 10 013A ETB4000T Multiple Services Test Platform 10

014 E41OTDRPM OTDR Power Module 10 015 E41OTDRLS OTDR List Source Module 10 016 EUSTAD Universal Adapter 10 017 E40PMVFL Connector for Power Module/Visual Fault Locator 10

018 FLUKE-1621 KIT Earth Ground Tester Kit, 128 Hz, 250 VAC 6

019 TB6000AV2-OC192-

10GE-DTG

Compact Network Test Platform 38

019A E80PMVFL Power Meter and VFL Option 38

019B CTCDI Diphase Test Option – MSAM TB/MTS-6000A Software 38

019C CPCDIV2 Diphase Dual Wide PIM 38

019D EULCADS-APC Universal Adapter FO 38

020 1101-015 CRT HANDLE SET (WITH INTERCELL CLAMP) 12

021 1102-007-45 24" LIGHTED SPIKE PROBE - 45 DEGREE TIP NEW 12

022 CTHSDATA HIGH SPEED DATACOM TEST OPTION – MSAM TB/MTS-6000A

SOFTWARE

023 CPHSDATAV2 DATACOMV2 DUAL WIDE PIM 38

024 CB-21148994-002 HI-SPEED V.24/EIA-530 D 38

025 CB-21144332-

V.36 DTE/DCE Emulation Ring Indicate Cable 72 Inches Long Y Split 24 Inches

026 E8146A MM-EF/SM 850/1300/1310/1550NM OTDR 38

(End of Summary of Changes)