CVC_APPENDICES_ATTACHMENTS_REFRENCES.pdf

APPENDIX B

Applicable Documents and Standards

The following documents are hereby incorporated by reference. The Contractor shall comply with these documents/standards during the performance of the contract requirements.

ANSI/TIA/EIA-606-A Administration Standard for Commercial Telecommunication Standard FGDC-STD-001-1998 - Content Standard for Digital Geospatial Metadata

FGDC-STD-007.3-1998 - Geospatial Positioning Accuracy Standards Part 3: National Standard for Spatial Data Accuracy

FGDC-STD-007.4-2002 - Geospatial Positioning Accuracy Standards Part 4: Standards for Architecture, Engineering, Construction (A/E/C) and Facilities Management

OSHA CFR 29 Part 1910.146 – Permit-Required Confined Spaces

The Contractor shall obtain and comply with any other applicable manuals not identified above that would be required to meet industry standards.

APPENDIX C

Entities, Attributes, and Domain Values for Recording Required Communication Feature Data (BASIC COMM PATH TEMPLATE)

C.1 Feature Attributes for Comm-Path Entities.

C.1.1 GPS_MANHOLE

C.1.1.1 Definition. An enclosed structure (manhole, hand hole). A butterfly layout is used that shows the floor and walls flattened out so that duct openings can be drawn on the walls. This must be represented as one polygon (one row in the table). The point is used to show the center of the manhole/hand hole cover.

C.1.1.2 Geometry type. Site (Point).

C.1.1.3 Attributes.

Column Name

SDSFIE

Common Name

Description Data Type Use Domain

Table

NAME Identifier Name

The standard identifier name (e.g. MH-19).

Char(20) Required

MH_TYPE_D A description for the type of manhole.

Char(16 Required D_MHTYP

MAPSRC_D Map Source Discriminator

DISCRIMINATOR - Used to indicate the source of data for the spatial position of this graphic.

Char(16) Required D_DATSRC

MAPACU Spatial Accuracy in Meters

Describes the spatial accuracy of mapsrc_d. in meters, +/- of where the feature may actually

be. For example, if you are using GPS and it’s only accurate to 1 meter, put a 1 in this field.

Real Required

C1.2 GPS_VAULT

C.1.2.1 Definition. An enclosed structure in a facility, in which the outside plant cables are spliced to the tipping cables

C.1.2.2 Geometry type. Site (Point).

C.1.2.3 Attributes.

Column Name

SDSFIE

Common Name

Description Data Type Use Domain

Table

NAME Identifier Name

The standard identifier name (i.e. V-19).

Char(20) Required

VLT_MAT_D Vault Material Code

Discriminator References D_COSTRM table. Used to describe the material composition of the vault.

Char(16) Required D_COSTRM

MAPSRC_D Map Source Discriminator

DISCRIMINATOR - Used to indicate the source of data for the spatial position of this graphic.

Char(16) Required D_DATSRC

MAPACU Spatial Accuracy in Meters

Describes the spatial accuracy of mapsrc_d. in meters, +/- of where the feature may actually be. For example, if you are using GPS and it’s only accurate to 1 meter, put a 1 in this field.

C.1.3 GPS_GENERAL_CONTAINER

C.1.3.1 Definition. An aboveground, enclosed structure that provides access to buried plant and a place to house splices, terminals.

C.1.3.2 Geometry type. Site (Point).

C.1.3.3 Attributes.

Column Name

SDSFIE

Common Name

Description Data Type Use Domain

Table

NAME Identifier Name

The standard identifier name (i.e. PED-19).

Char(20) Required

Column Name

SDSFIE

Common Name

Description Data Type Use Domain

Table

TYPE_D Type Code A description for the type of General Container.

Char(16) Required D_COPED

MODEL_NO The model number of the General Container.

Char(16) Required

TERMINAL_D Terminal Existence Code

A Boolean indicating the presence of a terminal (Y/N).

Char(16) Recommended D_BOOLEN

BONDED_D Bonded Code A Boolean indicating whether the General Container is bonded.

(Y/N).

Char(16) Recommended D_BOOLEN

MAPSRC_D Map Source Discriminator

DISCRIMINATOR -

Used to indicate the source of data for the spatial position of this graphic.

Char(16) Required D_DATSRC

MAPACU Spatial Accuracy in Meters

Describes the spatial accuracy of mapsrc_d.

in meters, +/- of where the feature may actually be. For example, if you are using GPS and it’s only accurate to 1 meter, put a 1 in this field.

C.1.4 GPS_DBSPLICE

C.1.4.1 Definition. An enclosed capsule that represents a splice case (aerial or buried).

C.1.4.2 Geometry type. Site (Point).

C.1.4.3 Attributes.

Column Name

SDSFIE

Common Name

Description Data Type Use Domain

Table

NAME Identifier Name

The standard identifier name (e.g. DBS01.1- 1200_1-900).

Char(20) Required

CAS_MAT_D Case Material Code

Used to describe the material composition of the splice case.

Char(16) Required for aerial splices and exposed DB splices

D_SPCMAT

CAS_TYP_D Case Type Code

Used to describe the type of splice case.

Char(16) Required for aerial splices and exposed DB splices

D_SPCCAS

MAPSRC_D Map Source Discriminator

DISCRIMINATOR - Used to indicate the source of data for the spatial position of this graphic.

Char(16) Required D_DATSRC

MAPACU Spatial Accuracy in Meters

Describes the spatial accuracy of mapsrc_d. in meters, +/- of where the feature may actually be. For example, if you are using GPS and it’s only accurate to 1 meter, put a 1 in this field.

C.1.5 GPS_PATH_SEGMENT

C.1.5.1 Definition. Link that represents an enclosure path of comm items outside of a building, manhole, General Container, or other enclosed structure. For duct banks, comm-path segment can represent the virtual path, duct bank, duct, and inner ducts. For ducts, comm-path segment can represent the virtual path, duct, and inner ducts. For direct-buried cables at road-crossings, comm-path segment can represent the virtual path, road-crossing duct, and direct-buried cables.

It can also represent the path of aerial cable, cable-bridges, and cable-troughs.

C.1.5.2 Geometry type. Polyline.

C.1.5.3 Attributes.

‘Column Name

SDSFIE

Common Name

Description Data Type Use Domain

Table

PATH_TYP_D Comm-Path Type Code

A discriminator field that describes what type of communications path this segment is representing.

Char(16) Required D_COPTHT

COVERDEPTH The minimum depth of this part of the path from grade, in inches.

This is mainly used for digging permits

Real Recommended

MAPSRC_D Map Source Discriminator

DISCRIMINATOR -

Used to indicate the source of data for the spatial position of this graphic.

Char(16) Required D_DATSRC

MAPACU Spatial Accuracy in Meters

Describes the spatial accuracy of mapsrc_d.

in meters, +/- of where the feature may actually be. For example, if you are using GPS and it’s only accurate to 1 meter, put a 1 in this field.

C.2 Domain Values for Attributes of Comm-Path Feature Entities.

C.2.1 D_BOOLEN: type list.

C.2.1.1 What it does. A table of Boolean data types YES and NO. Use for selecting the existence or non-existence of a value, condition, or feature.

C.2.1.2 Referenced by: GPS_GENERAL_CONTAINER

C.2.1.3 Attributes.

Lookup Value Long Description YES The condition is true or the feature does exist NO The condition is not true or the feature does not exist

C.2.2 D_COPED: communications – General Container type.

C.2.2.1 What it does. This table contains information about various communications pedestal types.

C.2.2.2 Referenced by: GPS_GENERAL_CONTAINER.

C.2.2.3 Attributes.

Lookup Value Long Description BD BD - Buried Distribution Closure, size unknown

BOX

BOX - Rectangular box type enclosure, accessed by removing a cover panel

CAB CAB - Cabinet enclosure, accessed through a hinged door CAD CAD - Controlled Access Distribution Closure PED4 4 inch pedestal PED6 6 inch pedestal PED8 8 inch pedestal PED12 12 inch pedestal OTHER Other TBD To Be Determined UNKNOWN Unknown

C.2.3 D_COPTHT: communications - comm path type.

C.2.3.1 What it does. This table contains information about various communications path types.

C.2.3.2 Referenced by: GPS_PATH_SEGMENT.

C.2.3.3 Attributes.

Lookup Value Long Description AERIAL Above ground path between, poles, towers or buildings

CABLE_BRIDGE Bridge only used for cables CABLE_TROUGH Pathway on top of ground for cables DIRECT_BURIED Below ground path where soil has direct contact with cable DUCT Single communications duct DUCTBANK A container for multiple ducts STUB-OUT Short duct used with manholes and vaults SURFACE Path directly on the surface UNDER_ROAD A duct for cables, usually under a road UNKNOWN Faulty Source Data

C.2.4 D_COSTRM: structure – material.

C.2.4.1 What it does. This table contains information about various structure materials.

C.2.4.2 Referenced by: GPS_MANHOLE, GPS_VAULT.

C.2.4.3 Attributes.

Lookup Value Long Description AL Aluminum CIS Concrete Cast inSitu/Cast in Place COMBINATION Combination of materials FIBERGLASS Fiberglass PLASTIC Plastic PRECAST Pre-Cast Concrete STEEL Steel

MASONRY Made from bricks, clay tiles, or block.

C.2.5 D_DATSRC: source list – data.

C.2.5.1 What it does. Allowable input values for data sources.

C.2.5.2 Referenced by: GPS_DBSPLICE, GPS_MANHOLE, GPS_PATH_SEGMENT, GPS_GENERAL_CONTAINER, GPS_VAULT.

C.2.5.3. Attributes.

Lookup Value Long Description AS_BUILT As-built drawings FLDLOC_SURVEY Field location survey GPS_FLDLOC GPS field located and verified data

C.2.6 D_MHTYP: type list - comm manhole.

C.2.6.1 What it does. The type of manhole.

C.2.6.2 Referenced by: GPS_MANHOLE.

C.2.6.3 Attributes.

Lookup Value Long Description 1T1 1T1 4T1 4T1 5T1 5T1 6T1 6T1 6T2 6T2 8T1 8T1 A A Type CEMH Controlled Environment Manhole HH_Type_A Handhole Type A J3 J3 Manhole J4 J4 Manhole JC9C JC9C (2450mm x 1750mm x 1450mm) L L Manhole R2A R2A Manhole T T Manhole V V Manhole OTHER Other

C.2.7 D_SPCCAS: communications - splice case type

C.2.7.1 What it does. Allowable values for the type of splice case

C.2.7.2 Referenced by: GPS_DBSPLICE

C.2.7.3 Attributes.

Lookup Value Long Description 12.5x28SS 12.5 Inch Stainless Steel 12.5x38SS 12.5 Inch Stainless Steel 12.5x45SS 12.5 Inch Stainless Steel 12.5x65SS 12.5 Inch Stainless Steel 2 TYPE 2 Type 2BB 2 Inch Better Buried 3BB 3 Inch Better Buried 4BB 4 Inch Better Buried 4x25.8RS 4 Inch ReddiSeal 4x25SS 4 Inch Stainless Steel 6BB 6 Inch Better Buried 5BB 5 Inch Better Buried 6BB 5 Inch Better Buried

7BB 7 Inch Better Buried 6.5x28.4RS 6.5 Inch ReddiSeal 6.5x38.5RS 6.5 Inch ReddiSeal 6.5x22SS 6.5 Inch Stainless Steel 6.5x28SS 6.5 Inch Stainless Steel 9BB 9 Inch Better Buried 9.5x28.4RS 9.5 Inch ReddiSeal 9.5x38.5RS 9.5 Inch ReddiSeal 9.5x28SS 9.5 Inch Stainless Steel 9.5x38SS 9.5 Inch Stainless Steel 9.5x45SS 9.5 Inch Stainless Steel 9.5x53SS 9.5 Inch Stainless Steel 2178-LS 3M™ Series 2178-LS FO-Splice case 2179-CS 3M™ Series 2179-CS FO-Splice case COR Corning Fiber optic splice closure FOSC_100_B_H Raychem FOSC-100 B/H HS Heat Shrink KBV K&B Vault LEAD Lead OTHER Other READY_ACCESS Ready Access UC_6_9 Siemens UC 6-9 UCN_7_10 Siemens UCN 7-10

C.2.8 D_SPCMAT: communications - splice case mat

C.2.8.1 What it does. Allowable input values for the material of the communications splice case

C.2.8.2 Referenced by: GPS_DBSPLICE

C.2.8.3 Attributes.

Lookup Value Long Description AL Aluminum EVA Ethylene Vinyl Acetate (Heat Shrinkable Tubing) FIBER Fiberglass

LEAD LEAD

PE PE - Polyethylene PP PP - Polypropylene PVC PVC - Polyvinyl Chloride SS SS - Stainless Steel OTHER Other

REMAINDER OF PAGE INTENTIONALLY LEFT BLANK

EXAMPLE A – COMMUNICATIONS CONTAINER FIELD DRAWING

12LIOF

FO600-315, 1-12

P30-26FF

01, 1-2750+ A, 2751-3000

2 Type 8-1/2X36

6 ft

4-inch ducts 2x3

3 ea.

1-inch innerducts

4 ea.

1-inch innerducts

6 ft f t

QUEST

P2-24 AIP

48LIOF

FO600-355, 1-24+

FO600-320, 1-12+

FO600-315, 1-12

6 ft

4-inch ducts 2x3

Ground Rod

30 in. dia iron mh cover. No ladder

P2

AIP

36LIOF

Cable Rack

36LIOF

FO 600-1,1-24+

FO600-772,1-12

FO

FO

FO 600-1

4-Inch Stub Out

12LIOF

FO600-320, 1-12

P3-26FF

A,251-300

P30-26FF

P O

HP HO

Manhole 4-inch Knockouts for future duct

P P Plugged duct

4-inch plugged hole 4-inch open hole open duct

O

Container Name MH-3 Bonded Yes_X__No______Alarm Yes___No X Size L 12 ft 6 ft D 6ft Grd.Rod Yes X No___Lid RND X___RET_____ Drainage Type None Duct Plugs Yes___No X Lid Size 30 Inch X Round Lock Present Yes___No X Ladder Yes___No X Lid Material: ( ) Concrete ( X ) Steel Lid Removal Requires Power Equipment Yes__ No X Container Material: Concrete Disposition ( X ) In Service,( ) Abandoned, ( ) Collapsed, ( ) Temporary,( ) Blocked,( ) Plugged, ( ) To Be Determined (TBD), ( ) Unknown Notes__Manhole buried, difficult to find.

48L10F

FO 600-355, 1-24

FO 600-320, 1-12

FO 600-315, 1-12

P2-24PF

09,1-200

3/8-inch minimum from center of hole to edge of tag (typical)

1/4-inch minimum distance from edge of label to edge of tag (typical) 1/8-inch minimum distance from edge of lettering to edge of hole (typical)

Minimum Dimensions of Clearances For ACPI Custom Polyethylene Tags

Not to Scale

Typical ACPI VCT 200 Series Tag with a Label for a Single Copper Cable

EXAMPLE B

EXAMPLE CABLE IDENTIFICATION TAGS

General:

1. Cable Tags are constructed from Avery Heavy Duty, White, Polyester, adhesive labels attached to ACP International (ACPI) VCT-200 and VCT-201 or to ACPI custom-made tags of polyethylene .055-inch thick tag backing with an integral clear laminate flap.

2. Label lettering is 12pt. Arial in permanent black ink printed with a Laser printer process.

3. Cable tags are secured to cable with two 3/16-inch wide, black, Type 6/6 Nylon Cable Ties. Ties are fastened to cable by running tie around cable and through the two holes at each end of tag.

4. Tags for copper cable have black lettering on a white label placed on an orange backing. Tags for fiber cable have black lettering on a white label placed on a yellow backing.

5. Each cable sheath has a single (individual) tag.

P1-24PF

Tag Lettering Example

Not to Scale

Edge of Avery L7992 Polyester Label

Labels for fiber optic cable are placed on a yellow tag backing, copper cable on orange

Labels for copper cable are placed on an orange tag backing, fiber cable on yellow

Label lettering is black Arial bold font, 12 point or larger

Tag has an integral clear plastic laminate flap.

Not to Scale

Avery L7060 Polyester Label

EXAMPLE B – SPECIFICATIONS AND DETAILS FOR CABLE IDENTIFICATION TAGS

TWISTED PAIR CABLE

TAGS

DESCRIPTION OF TAG NOMENCLATURE

CVC EDITOR

ADD NEW CABLE

SHEATH SELECTION

Goto TAB

DESIGNATION

CVC CABLE TAG

SEE NOTES BELOW FOR DESIGNATION

OF TWISTED PAIR CABLE TYPES

TYPE OF OUTER PROTECTION

FOR CABLE.

NUMBER OF CABLE PAIRS IN CABLE,

FOR 100 PAIR CABLES AND UP, DO

NOT INCLUDE “00’S” WHEN LABELING

CABLES.

FOR 24 PAIR CABLES AND LESS USE

AN “X” FOR 25 PAIR CABLES AND UP

USE A “-“.

CABLE GAUGE

TYPE OF CONDUCTOR PROTECTION

CABLE NUMBER

CABLE COUNT

A “+ ALPHA” TO IDENTIFY DEAD

PAIRS

DEAD PAIR COUNT

TWISTED PAIR

FIBER OPTIC CABLE

TAG

ADD NEW CABLE

SHEATH SELECTION

Goto TAB CABLE

OR

OF FIBER OPTIC CABLE TYPES

“A” IF ARMORED, “F” IF FLAME RETARDANT

NUMBER OF FIBERS IN CABLE SHEATH

SHEATH STRUCTURE/TYPE DESIGNATORS

“C” CENTER SUPPORT

“L” LOOSE TUBE

“T” TIGHT TUBE

“B” BLOWN FIBER

“R” RIBBON

CORE OR CLADDING DIAMETER MICRONS)

8.3 CORE FOR SINGLE MODE*

50 OR 62.5 CORE FOR MULTIMODE**

200 CORE

125 CLADDING

140 CLADDING

FILLED, OTHERWISE BLANK

LOCALLY ASSIGNED CABLE NUMBER

“1242/678” FROM/TO BUILDING NUMBERS

COMPLEMENT COUNT

FIBER OPTIC

FO1242/678,1-12

FO1242/688,1-12

FO1242/702,1-12

FO1242/744,1-12

COAXIAL CABLE

(SERVICE TO ATCALS

EQUIPMENT) TAG

ADD NEW CABLE

SHEATH

SELECTION

CVC Goto TAB

OF COAXIAL CABLE TYPES

COXIAL CABLE

“-AIR”, AIR DIELECTRIC

“-FF” FOAM DIELECTRIC

“-FIGURE 8”, FOAM SELF-SUPPORT/FIGURE 8

“-QUAD” , QUAD FOAM DIELECTRIC

“-SOLID” , SOLID DIELECTRIC

“-TWINAX” , TWINAX DIELECTRIC

DESIGNATOR OF METEROROLOGICAL OR ATC

EQUIPMENT TRANMITTING SIGNAL.

COMMON NAME OF COAXIAL CABLE TYPE

CABLE NUMBER

COAXIAL

AN GPN-20 [RG216,

#4]

FIBER OPTIC/TWISTED

PAIR CABLE TAG

ADD NEW CABLE

SHEATH SELECTION

OF FIBER OPTIC/TWISTED PAIR CABLE TYPES. (ALSO,

REFER TO INDIVIDUAL DESCRIPTIONS FOR FIBER OPTIC

AND TWISTED PAIR CABLES)

SHEATH STRUCTURE/TYPE DESIGNATORS

CORE OR CLADDING DIAMETER (MICRONS)

NUMBER OF TWP IN CABLE SHEATH

TWP GAUGE

FIBER OPTIC CABLE DESIGNATOR

LOCALLY ASSIGNED CABLE NUMBER

COMPLEMENT COUNT

TWP DESIGNATOR AND CABLE NUMBER

FIBER OPTIC

/TWISTED PAIR

CA04

F0, 10/634

NUMBER OF PAIRS IN THE TWP CABLE

FIBER OPTIC/COAXIAL

CABLE TAG

CABLE TAG DESIGNATION

OF FIBER OPTIC/TWISTED PAIR CABLE

TYPES. (ALSO, REFER TO INDIVIDUAL

DESCRIPTIONS FOR FIBER OPTIC AND

COAXIAL CABLES)

NUMBER OF FIBERS IN

CABLE SHEATH

SHEATH STRUCTURE/TYPE

DESIGNATORS

CORE OR CLADDING DIAMETER

(MICRONS)

COAXIAL DESIGNATOR

MIL TYPE OF COAXIAL CABLE

FIBER OPTIC CABLE

DESIGNATOR

LOCALLY ASSIGNED

CABLE NUMBER

NUMBER OF FIBERS IN CABLE

SHEATH COMPLEMENT COUNT

FIBER OPTIC/COAXIAL

RG-177U/FO, 167/765

TWISTED PAIR/COAXIAL

CABLE TAG

ADD NEW CABLE

SHEATH

SELECTION

CVC Goto TAB CABLE

OF TWISTED PAIR/COAXIAL CABLE TYPES

TYPE OF OUTER PROTECTION

FOR CABLE.

NUMBER OF CABLE PAIRS IN

CABLE

CABLE GAUGE

TYPE OF CONDUCTOR

PROTECTION

COAXIAL CABLE DESIGNATOR

FOR COMBINATION CABLE

TWP CABLE NUMBER

TWP CABLE COUNT

EQUIPMENT SERVED BY COAXIAL CABLE

TYPE OF COAXIAL CABLE

TWISTED

PAIR/COAXIAL

CA06/AN GPN-20 [RG-216]

SPECIAL OSP CABLE

TYPES-TAGS

ADD NEW CABLE

SHEATH SELECTION

FROM EXAMPLES IN

STANDARD SYMBOLS

FOR TELEPHONE

OUTSIDE PLANT

DRAWINGS

ENGINEERING DATA,

SKETCH 1, SHEET 1

OF SPECIALTYPES OF CABLE

2-19 +8C16 200 PAIR LEAD SHEATH, 19 GAUGE PLUS 8

CONDUCTOR 16 GAUGE

(2) 124 OHM CCTV…TWO 124 OHM CLOSED CIRCUIT TV

CABLES

PAIRS 1-25 LOADED H-88 LOADING

PAIRS 26-100 NOT LOADED

VIDEO PAIRED CABLE, 50 PAIR #22 GAUGE PLUS 6 PAIRS #16

GAUGE

UNKNOWN OR AIP

2-19 + 8C16

(2) 124 OHM CCTV

VCP

SPECIAL OSP CABLE

FROM EXAMPLES IN

STANDARD SYMBOLS

FOR TELEPHONE

OUTSIDE PLANT

DRAWINGS

ENGINEERING DATA,

SKETCH 1, SHEET 1

(2)-RG-177/U

OF SPECIALTYPES OF CABLE

SINGLE PLASTIC SHEATH, 52PAIR, SCREEN (FOR CARRIER

APPLICATION, PLASTIC INSULATED , FILLED

72 QUAD 19 GAUGE SUBMARINE

(2)-RG-177/U TWO RG-177/U COAXIAL CABLES

COAXIAL

P52-S22PF

Unknown or AIP

SUBM72QD-19

(2)-RG-177/U

ATCALS OSP CABLE

ADD NEW CABLE

SHEATH SELECTION

Goto TAB DESIGNATION

CVC CABLE TAG

DESIGNATION

FROM EXAMPLES IN

38MSS Guide to CSIR Drawing Record Maintenance distributed 28 May 97

OF ATCALS CABLE(METEOROLOGICAL AND ATC

CABLES)

NUMBER OF CONDUCTORS AND WIRE GAUGE

FOLLOWED BY THE EQUIPMENT THE CABLE

SERVES.

12C12 AN/TRN-6 TACAN