A01.31_Description_of_Requirement_-_Attachment_3.docx

Equal To Info

1) Tannoy Di6 DC Speaker or equal to:

RMS Output Power 90 W PMPO Output Power 360 W Driver Type 165.10 mm Fibre Woofer Driver Type 25.40 mm Titanium Tweeter Minimum Frequency Response 75 Hz Maximum Frequency Response 30 kHz Impedance 8 Ohm Crossover Frequency 1.60 kHz Sound Pressure Level 115 dB Sensitivity 89 dB Physical Characteristics Colour White Material High Impact PolyStyrene (HIPS) Material Neodymium Material Steel Material Paper Form Factor Surface Mount Form Factor Pole Mount Speaker Installation Indoor/Outdoor Height 357.5 mm Width 230 mm Depth 223.2 mm Weight (Approximate) 5.50 kg

2) Tannoy Di8 or equal to:

200mm (8.00”) Dual Concentric™ transducer for high performance and durability 90 degree controlled conical dispersion for optimum coverage and forward gain Weather resistant rated IP64 to EN60529 (IEC529) High power handling and extended bandwidth Phase coherent design for superior vocal articulation and music reproduction Yoke bracket supplied, optional accessories include pole mount adaptor and the unique K-Ball™ pre-wired, fully adjustable multi-angle bracket Five year loudspeaker warranty Low insertion loss 60W transformer for a more powerful and dynamic performance in distributed audio installations Bottom mounted switch for line voltage settings Indoor or outdoor commercial, professional and residential installations

3) Tannoy Ceiling Loudspeakers CVS6 or equal to:

Coaxially mounted 150mm (6") mineral loaded woofer with rubber surround and 19mm (0.75") soft dome diffraction loaded tweeter.

High power & high sensitivity with extended frequency response and very low distortion Wide, controlled constant directivity dispertion for optimum coverage.

UV/weather resistant UL94V-0 ABS front baffle Easily accessible tapping switch on front baffle.

Low insertion loss 60 W line transformer Ferrofluid cooled neodymium HF Packaged with tile rails and C-ring for quick & easy installation and simple stocking logistics

4) TesiraFORTE AVB AI or equal to:

128 x 128 channels of AVB 12 mic/line level inputs, 8 mic/line level outputs Gigabit Ethernet port Up to 8 channels of configurable USB audio RS-232 serial port 4-pin GPIO 2-line OLED display with capacitive-touch navigation Rack mountable (1RU) System configuration and control via Ethernet Internal universal power supply Fully compatible with Tesira servers, expanders and controllers (AVB model) Signal processing via intuitive software allows configuration and control for signal routing, mixing, equalization, filtering, delay and much more CE marked, UL listed and RoHS compliant Covered by a 5-year warranty

5) Lab Gruppen Amp -4 Ch - 70 volt C10:4X or equal to:

Four channels in 2U – High channel density reduces space requirements and installation time High continuous output power of 250 W per channel at 70 V, 4 ohms, 8 ohms, and 16 ohms* All channels individually selectable for lo-Z or hi-Z Loudspeakers (2 ohm – 16 ohm) and distributed systems can be connected to the same unit Bridged operation – Channel pairs bridgeable for increased output or for driving 100 V systems Patented output stage based on Class D topology High efficiency for lower thermal stress General Purpose Input/Output (GPIO) – Compatible with third-party control systems NomadLink® network ready Universal Power Factor Corrected PSU with IEC inlet Efficient cooling – Dual variable speed fans and parallel airflow over output devices provide uniform cooling Comprehensive circuit protection and fault indication Phoenix-style input connectors and barrier strip output connectors

6) Lab Gruppen - Amp 8 Ch - LO-Z for Program Loud speakers C10:8X Or Equal to Eight channels in 2U - Extremely high channel density reduces space requirements and installation time High continuous output power of 125 W per channel at 70 V, 4 ohms, 8 ohms, and 16 ohms* All channels individually selectable for lo-Z or hi-Z Loudspeakers (2 ohm – 16 ohm) and 70/100 V distributed systems can be connected to the same unit Bridged operation – Channel pairs bridgeable for increased output or for driving 100 V systems Patented output stage based on Class D topology High efficiency for lower thermal stress

General Purpose Input/Output (GPIO) – Compatible with third-party control systems NomadLink network ready Universal Power Factor Corrected PSU with IEC inlet Switchable 35 Hz high pass filter Efficient cooling – Dual variable speed fans and parallel airflow over output devices provide uniform cooling Comprehensive circuit protection and fault indication Phoenix-style input connectors and barrier strip output connectors

7) Shure Podium Mic MX418/C Or Equal to Features:

•Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum •Interchangeable cartridges provide the right polar pattern for every application •Balanced, transformerless output for increased immunity to noise over long cable runs •Shock mount that provides over 20 dB isolation from surface vibration noise •Locking flange mount for permanently securing microphone to lecterns, pulpits, or conference tables •Snap-fit foam windscreen

Shure MX418/C Specifications:

•Frequency Response: 50 Hz - 17 kHz •Polar Pattern: Cardioid •Output Impedance (at 1000 Hz): Rated at 150 Ohms (180 Ohms actual) •Open Circuit Sensitivity (at 1 kHz, ref. 1V/Pascal*): ◦Cardioid: –35.0 dB (17.8 mV) ◦All settings –12 dB at 0 gain ◾*1 Pascal = 94 dB SPL

Maximum SPL (1 kHz at 1% THD, 1k Ohm load): ◦Cardioid: 124.2 dB ◦All settings +6 dB at 0 gain Equivalent Output Noise (A-weighted): Cardioid: 28.0 dB SPL Signal to Noise Ratio (referenced at 94 dB SPL) Cardioid: 66.0 dB Dynamic Range at 1k Ohm Load: 96.2 dB; 100 dB at 0 gain •Common Mode Rejection: 45.0 dB minimum

Preamplifier Output Clipping Level (1% THD):

◦–6.0 dBV (0.5 V) ◦–12 dB at 0 gain •Polarity: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector.

•Power Requirements: 11 to 52 VDC phantom, 2.0 mA

• Operating Temperature Range: –18° C to 57° C (0° F to 135° F) •Relative Humidity: 0 to 95%

8) A400SM Shock Mount Or Equal to Construction, which reduces the transmission of impact or surface noise by up to 20 dB. Fits a variety of gooseneck microphones.

9) MX412 Gooseneck Microphones Or equal to 12" Desktop Base with 10' Cable, Logic Functions, Programmable Switch, LED Indicator, Snap-Fit Foam Windscreen Frequency Response 50 to 17,000 Hz lmpedance 180 ohms actual (EIA rated at 150 ohms) Phantom power required? 11 to 52 Vdc phantom, 2.0 mA

10) Mic cable snake - 4 Channel25' Mic Cable Snake - 4 Channel Or equal to Heavy-duty powder-coated steel stagebox with Whirlwind connectors and integrated handle each pair contains two 24-gauge insulated conductors with 100% foil shield Fan features Whirlwind connectors with engraved numbers and letters.

11) 25: Microphone Cables25 - MIC-XX Or equal to Cable Type Microphone XLR cable Length 25' (7.6 m) Gauge 2-conductor 23 AWG Shielding 94% braided shield Connector 1 XLR male Connector 2 XLR female

12) SafCord Carpet Cord Cover Or equal to: SAFCORD is the only non-adhesive solution for securing cords and cables to carpet and rugs For use in stairways, hallways, office workstations, conference rooms, tradeshow booths, and doorways.

Low profile which 'hugs' the surface beneath it which alleviates tripping Washable and reusable.

Is made of durable, industrial grade Cordura Nylon.

Tunnel like construction allows for users to reposition cords and cables as needed.

Works best on non-cut pile carpets such as Berber and loop carpet and also works well with commercial grade rugs and carpets.

13) Shure Wireless Mic or equal to:

Delivers defined, streamlined performance with transparent 24-bit digital audio. Combining professional features with simplified setup and operation, QLX-D® offers outstanding wireless functionality for demanding live sound events and installations.

Featuring the WL183 lavalier microphone, QLXD14/83 combines professional features with simplified setup and operation.

Includes WL183, QLXD1, QLXD4, power supply, 2 AA batteries, two 1/2 wave antennas, 2 BNC cables, zipper bag, 2 BNC bulkhead adapters, rackmount kit, and user guide.

14) Shure Handheld & Lavalier Combo wireless Mic System Or equal to Featuring an SM58® handheld wireless microphone transmitter and WL185 lavalier microphone, QLXD124/85 combines professional features with simplified setup and operation.

Includes QLXD2/SM58, WL185, QLXD1, QLXD4, microphone clip, 2 zipper bags, 4 AA batteries, power supply, two 1/2 wave antennas, 2 BNC cables, 2 BNC bulkhead adapters, rackmount kit, and user guide.

15) Shure - Active Wireless Mic Antenna Splitter Or equal to Five-way RF signal output Support QLX-D®, ULX®, ULX-D®, SLX®, and BLX® (BLX4R only) receivers Front-mounting antenna hardware Rack-mounting hardware 4 DC power feeds and for receivers (15V, 2.5A max) DC outputs for antenna bias (12V, 300mA max) 1 UA844+SWB Antenna/Power Distribution System 1 PS60 power supply 4 Locking DC power cables (for ULX4D, ULXP4) 4 Non-locking DC power cables (for QLXD4, SLX4, BLX4R) Ten 22 in. BNC cables Two 6 ft. BNC cables 2 Bulkhead adaptors 1 Rack mount Hardware kit 1 Literature Package

16) UA221 Antenna Splitter/Combiner Kit Or equal to The UA221 Kit lets you split an incoming signal into two outgoing signals or combine two incoming signals into one signal. Each kit includes two UA221 Splitter/Combiners, four coaxial cables, and attaching hardware.

The UA221 Splitter/Combiners are designed for use with Shure Model UA8 1/2 wave omnidirectional receiver antenna, UA400 1/4 wave UHF antennas, UA820 1/2 wave antennas (discontinued), and UA802/UA825/UA850/UA8100 50 ohm low loss antenna cable

17) UA820G-1/2 WV or equal to UA8 is a 1/2 wave omnidirectional receiver antenna for UHF-R®, ULX®, SLX®, QLX-D®, ULX-D®, and BLX4R receivers (frequency range dependent) and PSM transmitters. Features 0-, 45-, and 90-degree positioning for increased stability.

18) UA505 Metal BracketOr equal to the steel mounting bracket (part #53B8493) has a uniform thickness of 0.62" (16 mm).

The width of the entire bracket is 1.66" (42 mm).

The length of the entire bracket is 4.66" (118 mm).

The length of the longer bracket section, that has five holes, is 3.0" (76 mm). This longer section has three holes for mounting screws. Each screw hole has a diameter of 0.18" (4.6 mm). There are also two holes for mounting on a mic stand: one hole has a diameter of 0.64" (5/8" - 16 mm) and one hole has a diameter of 0.38" (3/8" - 9.5 mm).

There are two shorter bracket sections, each having one hole; these sections form a 90 degree angle. The length of each section is 1.66" (42 mm). Each shorter section has a hole to mount a BNC bulkhead connector. The diameter of each hole is 0.51" (13 mm).

19) Atlas Sound MS Or equal to Stand Height Adjustable 35-63” (88.9-160.02); Boom Length Straight stand boom not included; Base type round Cast Iron; Weight 9lbs (4kg)

20) Listen Technologies LS-41-072 Or equal to:

One (1) LT-803-072-01 3-Channel RF Transmitter (72MHz) One (1) LA-106 Telescoping Top Mounted Antenna (72MHz) Four (4) LR-200-072 Standard 3-Channel RF Receiver (72MHz) Four (4) LA-164 Ear Speaker Two (2) LA-166 Neck Loop One (1) LPT-A107-B Dual RCA to Dual RCA Cable 6.6 ft.(2 m) Four (4) LA-361 High Capacity AA Alkaline Batteries(2) One (1) LA-304 Assistive Listening Notification Signage Kit Features:

Ensures public venues deliver an enriched listening experience and meet new assistive listening legislative requirements Easily switches between three different channels •Economical price - backed by exceptional service and support Reliable clear sound quality - 62 dB SNR Limited Lifetime Warranty - buy with confidence

21) Equipment Rack -41 RU BGR-4127 Or equal to tangible rack enclosures (fully welded, incl. rear door) - fully assembled, 41 ru, 619 mm useable depth, weight capacity 1.360 kg

22) Equipment Rack - Caster Base or equal to: Black, Casters/leveling feet

75.87 x 27" (1927.09 x 685.8 mm)

23) 41-27 Side Panels or equal to: Dimensions (HxD) 75.87 x 27" (1927.09 x 685.8 mm); weight 54.0lb; BSPN-41-27 Side Panels are designed to prevent access to the A/V equipment stored inside the BGR-4127 Breakthrough Next-Generation Rack

24) Equipment rack accessories - Top Panel, lever Lock Wiring Bars, Closure Panels Or equal to: add the finishing touches to rack installation appearance, but also maximize system utility and play an important role in system reliability and life. Don’t be fooled by the term “accessories” – these products are essential!

All are:

- Purpose-designed for the application

- Manufactured to the highest quality standards

- In-stock or quickly custom manufactured in the USA to ship promptly

25) Storage Shelf for FBO Computer and Portable Touch Panel Or equal to:

Fully vented bottom and sides for heat dissipation Accepts optional clamping bars to secure components Accepts mounting of PD-815SC-PBSH power strip Welded steel construction, with black powder coat finish

26) Rack Storage Drawer D2 Or equal to:

Bottom of drawer can be removed before installation to mount small devices and can be clicked into place in the drawer once components are mounted and wired for install flexibility Articulating cable arm keeps wires from getting pinched when opening or closing drawer.

Features an innovative mounting pattern in the bottom Provides abundant cable management and device tie down points Drawer locks for added security 4-point mounting for added strength

27) Custom Rack Shelf for Blue-Ray Player RSH4A2S Or equal to:

Mounts in any 19 inch wide rack Custom rack shelves also available for LCD monitors Vented for passive air flow Rear L brackets keep your equipment in place Includes shelf and custom cut rack mount faceplate

28) AV Table box for Lectern Installation 70-1037-02-Cable Cubby 1200 or equal to:

Accommodates one Series/2 AC 100 Series or AC+USB 200 Series Power Module, plus three Retractors, eight AV cables, or three AAP - Architectural Adapter Plates Slim enclosure is ideal for conference tables, desks or study carrels, lecterns, and other work spaces where space is at a premium.

Patented modular design for fast assembly and serviceability.

Retractor bracket, Cable Pass-Through bracket, and AAP bracket included; Retractor modules, cables, and AAP plates sold separately.

Retractor Bracket holds three Retractor Series/2 or Retractor Series/2 XL cable retraction modules Connectivity Bracket supports up to three single-space AAPs.

29) AC+USB 200 Series Power Modules or equal to:

For use with Cable Cubby® Series/2 and EBP 1200C enclosures AC power outlets available for US, Europe, and other major world markets AC+USB 224 US provides a total of up to 4 A / 20 watts of power Non-US versions provide two 5 VDC USB power outlets and up to 2.1 A / 10.5 watts of power Available Multi-Region AC outlet is compatible with a variety of AC plug types All AC+USB 200 Series power modules are CE compliant when installed

30) USB Extender 2.0 Or equal to:

Extend USB 2.0 over CAT5 up to 330 feet (100m) Gefen's USB 2.0 LR extends high-speed USB devices over a single CAT-5e cable, up to 330 feet/100 meters.

The compact USB 2.0 LR Sender/Receiver units install in minutes and support USB versions 1.1 and 2.0 - essential for high-performance applications such as digital imaging and interactive gaming.

The two-port USB 2.0 hub that is built into the Receiver unit is ideal for remotely accessing laser printers, scanners, external hard drives, CD/DVD burners, flash drives, and standard resolution web cams.

Applications such as Remote Desktop (keyboard/mouse) extension, security, industrial control, digital signage control, and scientific data acquisition are all made possible thanks to EXT-USB2.0-LR's universal implementation of USB standards.

31) USB Extender - Spare Power Supply or equal to 5VDC Power Supply - 2.6 AMP - locking type- interchangeable connectors (US,UK,EU,AU)

32) 2 post racks 45UOr equal to managing equipment and cabling at the cross connect. Iincludes one CPI Standard Rack, a concrete floor installation kit, and one or two CPI Global Vertical Cabling Sections packaged in a single carton.

Standard Rack will support patch panels, fiber enclosures and network switches, is UL Listed as a communications circuit accessory to meet code requirements, and is easy to set up and use. Global Vertical Cabling Section is a single-sided cable management trough that controls cable feed with a patented system of large cable openings that align with each equipment-mounting space (RMU) on the rack. The Snap-on cover provides easy access to cables and a clean, finished look for a complete cable management system.

Integrated cable management , Vertical orientation

Height (Rack Units):

Product Material:

Aluminum

Product Type:

Rack

Rack Size:

19"

Rack Size (metric):

48.3 cm

33) Or equal to: Install a pre-assembled UPS solution and minimize disruption of day-to-day operations. Take advantage of the customized products with locking cable connectors to prevent accidental cord disconnections, and significantly improve system uptime.

.UPS ( rack-mountable )

.AC 120 V

.1980 Watt

.2200 VA

.USB

.8 output connector(s) .2U

34) Or equal to: Radio Designer Labs 2-Ch. Power Amplifier TX-PA40D - Features:

Stereo Audio Power Amplifier 20 Watts RMS per Channel into 8 Ω - 40 Watts Total 15 Watts RMS per Channel into 4 Ω - 30 Watts Total Left and Right Unbalanced Phono Jack Inputs Switch-Selectable Stereo or Mono Operation Studio Quality, Aurally Transparent Compressor/Limiter Compressor/Limiter Controls Clipping Compressor Produces Maximized Average Output Power Compression Enabled Using Input Level Adjustments LED to Indicate Audio Compression Threshold Outputs Drive 4 or 8 Ohm Speakers High-Efficiency Class D Operation Thermal and Short-Circuit Protection TX-PA40D includes North American Cord; TX-PA40DE excludes Power Cord

35) Or equal to Full range surface-mount loudspeaker for indoor and outdoor installation applications 40 Watts continuous, 160 Watts peak power 4" mineral loaded polypropylene driver with nitrile rubber surround for enhanced durability and long-term reliability 0.75" ferrofluid cooled soft dome neodymium high frequency driver 110' constant directivity dispersion for optimum coverage UL 1480 certified for general signaling systems UV and weather resistant UL 94 V-0 ABS enclosure 6 Ohm direct input for low impedance applications All components weather resistant to IP64 for outdoor use Stylish durable enclosure in a semi matt black paint finish fits unobtrusively in any environment Painted perforated aluminum mesh grille with dust protection Yoke bracket included for ease of installation Phoenix* connectors for input and link output 5-Year Warranty Program* Designed and engineered in England