W912PQ18T5002.pdf

W912PQ-18-T-5002

SEE ADDENDUM

(No Collect Calls)

W912PQ-18-T-5002 13-Apr-2018

b. TELEPHONE NUMBER

716-236-2520

8. OFFER DUE DATE/LOCAL TIME

01:00 PM 04 May 2018

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA X ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

W912PQ9. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

PHILIP J ROTT

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

1 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.X

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

F8K7CE8024AW01

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED OR X

SMALL BUSINESSX

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

W912PQ- 107TH AW/MSC

9910 BLEWETT AVE

NIAGARA FALLS NY 14304-6001

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE F8K7CE 16. ADMINISTERED BY

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

F8K7CE- 107 AW/CE

MATTHEW HEINSLER

2665 JOHNSON STREET

NIAGARA FALLS NY 14304

TEL: 716-236-2531 FAX: 716-236-2407

716-236-3043FAX:

TEL: 716-236-2493 SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

$15,000,000

NAICS:

238290

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF65

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

Section SF 30 - BLOCK 14 CONTINUATION PAGE

SITE VISIT

NOTICE OF SITE VISIT

Site visit attendance is *MANDATORY to be considered for this award.

A site visit will be held on Wednesday, 25 April 2018 at 9:00 a.m. EST.

Due to security conditions, all offerors must register to attend this site visit.

Please send name(s), date of birth and driver license number with state issuance to:

Email: usaf.ny.107-msg.list.MSC@mail.mil

POC: SMSgt Jason Fronden, 716-236-2493, jason.m.fronden.mil@mail.mil

This site visit location will be:

107th Attack Wing Building 202 2650 Johnson Street Niagara Falls, New York 14304

Interested Contractors are required to attend the site visit to be considered for this award.

Section B - Supplies or Services and Prices

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 1 Job

BUILDING LIGHTNING PROTECTION INSPECTION

FFP

RVKQ 18-2255. Commercial Building Lightning Protection Systems Annual Service to include all associated materials, equipment, and labor necessary, to inspect, test (mechanical & electrical), and perform minor maintenance and repair.

IAW attached RVKQ 18-2255 PWS.

POC: Deputy Base Civil Engineer (Major Matthew Heinsler 716-236-2531)

FOB: Destination

MILSTRIP: F8K7CE8024AW0100

PURCHASE REQUEST NUMBER: F8K7CE8024AW01

SIGNAL CODE: A

PSC CD: H359

NET AMT

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0002 1 Job Manpower Reporting

FFP

Contractor Manpower Reporting Application (CMRA): Section 2330a of title 10, United States Code (10 USC 2330a), requires the Secretary of Defense to submit to Congress an annual Inventory of Contracts for Services (ICS) performed during the prior fiscal year for or on behalf of the Department of Defense. The inventory must include the number of contractor employees using direct labor hours and associated cost data collected from contractors. CMRA is the system utilized to collect and provide the annual ICS to Congress.

The result of this requirement will require you to report this information if you are awarded the contract. To access the CMRA system and submit the appropriate data, please go to: https://cmra.army.mil.

FOB: Destination

0003 1 Job OPTION Option Year 1

FFP

BUILDING LIGHTNING PROTECTION INSPECTION IAW attached RVKQ 18-2255 SoW.

FOB: Destination

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0004 1 Job OPTION Option Year 2

FFP

BUILDING LIGHTNING PROTECTION INSPECTION IAW attached RVKQ 18-2255 SoW.

FOB: Destination

0005 1 Job OPTION Option Year 3

FFP

BUILDING LIGHTNING PROTECTION INSPECTION IAW attached RVKQ 18-2255 SoW.

FOB: Destination

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0006 1 Job OPTION Option Year 4

FFP

BUILDING LIGHTNING PROTECTION INSPECTION IAW attached RVKQ 18-2255 SoW.

FOB: Destination

Section C - Descriptions and Specifications

STATEMENT OF WORK

PERFORMANCE WORK

STATEMENT FOR

INSPECTION, TESTING, AND MINOR

MAINTENANCE OF

LIGHTNING PROTECTION SYSTEMS

BASE-WIDE

RVKQ 18-2255

107th Civil Engineer Squadron

2665 Johnson St Niagara Falls, NY 14304

31 Jan 2018

SECTION I

DESCRIPTION OF SERVICES

1. SCOPE OF WORK

1.1. Provide an annual service, including all management, tools, materials, parts, equipment and labor necessary to inspect, test (mechanical and electrical) and perform minor maintenance on seven (7) separate Lightning Protection Systems at Niagara Falls Air Reserve Station (NFARS), New York, in a manner that will comply with Air Force and commercial standards (AFI 32-1065 and NFPA 780 including the appendices) and in accordance with (IAW) all applicable federal, state, and local regulations for maintaining these systems to ensure continuous, safe, and reliable operation. The contractor shall perform inspection, testing and minor maintenance of the Lightning Protection Systems on the following seven (7) facilities: 202, 204, 904, 910, 912, 920 and 936. In addition, the contractor will submit a design for a Lightning Protection System for building 901 IAW AFI 32-1065 and applicable Unified Facility Criteria (UFC) guidance.

1.2. It is anticipated that the contract for such a service will be awarded as a Base Year plus Four (4) Options Years. Beginning with Option Year 2, annual service will also be required to be performed on the Lightning Protection System for Building 901. This will bring the total system count to eight (8). For solicitation & quoting purposes, contractor is to quote the incorporation of annual service of facility 901 beginning in Option Year 2.

2.1. INSPECTION, TESTING, AND MINOR MAINTENANCE SERVICES.

2.1.1. Scheduling Services. Contractor shall contact 107th Civil Engineer Squadron (CES) Deputy

Base Civil Engineer (BCE) (Maj. Matthew Heinsler, 716-236-2531), or approved and coordinated delegate, at least ten (10) business days prior to actual performance date to schedule any services so arrangements can be made for escorts, base access, and building access, prior to work performance. The contractor shall consider all facilities secure which will require additional coordination, planning, and scheduling with 107th CES Electric Shop and each of the facility managers. This project will require the contractor to work in facilities along the flight line which requires additional care be taken during every phase of construction to ensure Foreign Object Debris (FOD) is not introduced to the aircraft. The contractor shall coordinate access to the facilities with each of the facility managers. Additionally, the contractor shall coordinate the use of personnel lifting equipment along the flight line with Base Operations (Bldg. 912). When necessary, the contractor shall plan for and schedule inspections when the facility users will be least affected.

2.1.2. General. The 107th CES Deputy BCE (Maj. Matthew Heinsler 716-236-2531), or approved and coordinated delegate, will escort the contractor on base and assist in the coordination of services with each of the facility managers. The contractor shall provide means to verify for themselves that the each system is safe to perform inspection, testing, and minor maintenance as described below. All electrical work is to be conducted in accordance with NFPA 70, NFPA 70E, NESC, UFC 3-560-01, and AFI 32-1064. All work performed on the lightning protection systems shall follow the aforementioned standards plus NFPA 780 (including the appendices) and AFI 32-1065. All test equipment used by the contractor shall have been calibrated within the last 12 months and shall have labeling or documentation proving such.

2.1.3. Personnel Qualifications. Workers maintaining, repairing, modifying, and testing grounding systems must be thoroughly familiar with test equipment operation, lightning protection, grounding, and bonding theory and practices, referenced codes and standards, and specific requirements and procedures in AFI 32-1065 and NFPA 780, including the appendices.

Workers shall have industry standard commercial certifications (such as Master Installer, Master Installer Designer, or UL Certified) to perform the required inspection, testing and minor maintenance. The contractor shall present copies of all relevant certifications for all employees assigned to perform work under this contract. The contractor shall provide at least one master level certified technician to oversee all aspects of this project.

2.1.4. Lightning Protection Systems Visual Inspection. All visual inspections will be performed

IAW (in accordance with) AFI 32-1065 and NFPA 780, including the appendices. All work shall be performed by qualified personnel specifically trained to work on lightning protection systems. The contractor shall visually and physically inspect each system and determine if:

2.1.4.1. The system is in good repair. Inspect all visible parts of the system.

2.1.4.2. There are loose connections that might cause high resistance joints. Pull or tug on conductors and connections to insure sound connection, being careful not to damage the system in the process.

2.1.4.3. Corrosion or vibration has weakened any part of the system.

2.1.4.4. Down conductors, roof conductors, and ground terminals are intact, air terminals exceeding 24 inches in length are supported at a point not less than one-half their length, and no components or fasteners are missing.

2.1.4.5. Braided bonding wires or straps are excessively frayed (cross-sectional area reduced by half).

2.1.4.6. Ground wires/down conductors, air terminals (for earth-covered magazines [ECM]), masts, or poles are/have been damaged by mowers, equipment, or vehicles.

2.1.4.7. Conductors and system components are securely fastened to mounting surfaces. Position connections to better protect against accidental displacement. Adhesive-type fasteners are not allowed.

2.1.4.8. Additions or alterations to the protected structure require additional protection. See

UFC 3-575-01.

2.1.4.9. Surge protective devices (SPDs) supporting facilities and facility service appear damaged or indicator lamps signal an operation has occurred. Note: Inspection, repair, and replacement of SPDs protecting equipment are the responsibility of the equipment owner or user.

2.1.4.10. The system complies with the intent of applicable sections of the most recent version of NFPA 780, Standard for the Installation of Lightning Protection Systems, unless otherwise noted in AFI 32-1065

2.1.4.11. Ensure safety is not degraded to enhance aesthetic appeal of LPS system.

2.1.5. Lightning Protection Systems Testing. The contractor shall perform resistance and continuity tests as required for each of the lightning protection systems. The contractor’s electrical testing equipment shall be able to measure 10 ohms +/-10 percent for ground resistance tests, and 1 ohm +/-10 percent for continuity testing. The contractor shall use only instruments designed specifically for earth-ground systems that are intended for ground resistance testing. The contractor shall follow the manufacturer’s instruction manual for testing equipment except as modified in AFI 32-1065. If the resistance measured during continuity tests is greater than 1 ohm, check for deficiencies and document. The contractor shall measure the resistance of grounding electrodes using the fall-of-potential ground resistance test method. The contractor shall use the procedure recommended by the test equipment manufacturer or the auxiliary probe location shown in figure 1.1 below. Where possible, conduct this test at the corner of the building opposite the electrical service entrance. Exercise caution: underground metallic piping may influence readings. Position probes as far as possible from the grounding system under test. Connect the appropriate lead of a fall-of-potential meter to the ground rod at the test site. Place the potential reference probe at a distance greater than one- half the diagonal of the building under test, but not less than 7.6 meters (25 feet). Place the current reference probe 90 degrees from the potential reference probe (in a direction away from the facility under test) and the ground rod under test, and at a distance greater than one half of the building diagonal, but not less than

7.6 meters from the potential reference probe. Note that the distances between probes are equal. For buildings without a ground loop conductor, perform this test at each ground rod.

The contractor shall document the test performed and the values obtained at each test location. The contractor shall work closely with the 107th Base Civil Engineer office to provide a diagram of the grounding system for each location and the test values obtained at each tested location. The contractor shall contact the 107th Deputy BCE to obtain any existing drawings and information. Where no drawing is available, the contractor shall create one.

FIGURE 1.1

2.1.6. Lightning Protection Systems Minor Maintenance. The contractor shall mechanically tighten all loose mountings, connections, clamps, and splicers found during inspection. The contractor shall document all of the following for each system:

2.1.6.1. Weather-related degradation

2.1.6.2. Any strike damage

2.1.6.3. Opinion of overall effectiveness of the lightning protection system

2.1.7. Recordkeeping. The contractor shall prepare and submit a written report for each lightning protection system in which work was performed. The reports shall be provided to the government in digital format on CD/DVD and via email no more than 21 days after inspection has been performed. Reports and associated references shall be provided in source format (MS Word, MS Excel, etc.) and PDF format.

2.1.7.1. The contractor shall record all test results and provide a digital copy that may be used for comparison with future testing. This report shall identify the type of test performed, type of testing equipment used with calibration date, component that the test was performed on, the value obtained and the acceptable value for the test.

2.1.7.2. The contractor shall provide a detailed report that contains, at minimum, the following information for each lightning protection system in which work was performed:

2.1.7.2.1. A sketch of the grounding and lightning protection system showing test points, and where services enter the facility. Sketch should also show the location of the probes during the ground resistance test. (Separate sketches are suggested for earth ground and lightning protection systems on large complex facilities.)

2.1.7.2.2. Date action was performed.

2.1.7.2.3. Inspector's or tester’s name.

2.1.7.2.4. Weather conditions, soil conditions.

2.1.7.2.5. General condition of air terminals, conductors, and other components.

2.1.7.2.6. General condition of corrosion protection measures.

2.1.7.2.7. Security of attachment for conductors and components.

2.1.7.2.8. Resistance measurements of the various parts of the ground terminal system.

2.1.7.2.9. Variations from the requirements of AFI 32-1065 or NFPA 780.

2.1.7.2.10. Discrepancies noted and corrective actions recommended.

2.1.8. Period of Performance (*work to be performed between 1 June XX and 31 Aug XX of each Year).

Base Year: 1 June 2018 – 31 May 2019

Option Year 1: 1 June 2019 – 31 May 2020

Option Year 2: 1 June 2020 – 31 May 2021

Option Year 3: 1 June 2021 – 31 May 2022

Option Year 4: 1 June 2022 – 31 May 2023

2.1.8. Non Payment for Multiple Trips. The contractor shall provide all tools necessary for inspection and testing. The government will not pay for multiple trips between the contractor’s office/workshop and Niagara Falls ARS.

3.3. ENVIRONMENTAL REQUIREMENTS.

3.3.1. Green Procurement. Executive Orders 13423 and 13514 require the use of recycled and recovered materials, bio-based products, energy and water saving products, and environmentally preferable products. Recycled and recovered materials are identified by the Environmental Protection Agency’s Comprehensive Procurement Guidelines, information available at http://www.epa.gov/epaoswer/non-hw/procure/products.htm. Bio-Based products are identified by United States Department of Agriculture under Bio-Based products, information is available at http://www.biobased.oce.usda.gov. Environmentally preferable products are products that are less hazardous to the environment. Some products are certified by the Green Seal organization and information is available at http://www.greenseal.org/. The Contractor shall procure and use environmentally friendly products in the execution of this contract. Appendix C contains a list of preferred bio-based products. The Contractor will also refer to the EPA websites for a list of environmentally friendly products.

3.3.2. Hazardous Materials. In the accomplishment of this contract, non-flammable, environmentally friendly, biodegradable products IAW AFI 32-7080, AFI 32-7042, and AFI 32- 7086, Section V-TE-2 must be used. Submit and forward to the COR the AF Form 3952; “Chemical/ Hazardous Material Request Authorization” and the manufacturer’s “Material Safety Data Sheet (MSDS)”, for all chemical used on Niagara Falls ARS, two (2) weeks prior to contract start. Prior to the use of any new chemicals under this contract, the contractor will submit an AF Form 3952 with a manufacturer’s MSDS for approval. No chemicals will be used on Niagara Falls ARS prior to obtaining this approval. No chemicals/Refills will be stored on Niagara Falls ARS. The contractor will submit hazardous material usage monthly to the COR. The contractor is responsible for containing, handling, and cleanup of all spills from this operation. Cost to dispose of spilled material and any other waste items resulting from the spill is the responsibility of the contractor. All spills, leaks and inadvertent release of hazardous materials will immediately be reported to the Fire Department at (716) 236-2408.

SECTION II

GOVERNMENT-FURNISHED PROPERTY/SERVICES/EQUIPMENT

4.1 Government-Furnished Equipment. Existing lightning protection systems located on the facilities identified in Section 1 above.

SECTION III

GENERAL INFORMATION

5.1. HOURS OF OPERATION.

5.1.1. Normal Hours of Operation. Perform routine services required under this contract during Niagara Falls ARS normal duty hours of 7:30 a.m. to 4:00 p.m. Monday through Friday.

After Normal Hours of Operation. Inspection and testing may be performed after normal hours with prior approval and coordination from 107th Civil Engineer Squadron (CES) Deputy Base Civil Engineer (BCE) (Maj. Matthew Heinsler 716-236-2531)

5.1.2. Holidays. Routine work will not be required on the following holidays or any holidays observed in lieu thereof:

New Year's Day (January) Labor Day (September) Martin Luther King Day (January) Columbus Day (October) President's Day (February) Veterans' Day (November) Memorial Day (May) Thanksgiving Day (November) Independence Day (July) Christmas Day (December)

6.6. QUALITY CONTROL. The contractor will develop and maintain a quality program to ensure services are performed IAW commonly accepted commercial practices. Contractor will develop and implement procedures to identify and prevent defective services from recurring. As a minimum, the contractor will develop quality control procedures that address the areas as identified in Section II, Service Summary.

6.7. QUALITY ASSURANCE. The government will periodically evaluate the contractor’s performance by appointing Quality Assurance Evaluator and alternate to monitor performance to ensure services are received. The government COR will evaluate the contractor’s performance through intermittent on-site inspections and receipt of complaints from base personnel.

6.8. SECURITY REQUIREMENTS. The Contractor and all employees will comply with all Niagara Falls ARS security requirement imposed by the local installation commander at all times while on the premises to include not using cell phones while operating a vehicle on Base. Contractor will obtain necessary badges(s) required for access to Niagara Falls ARS. The information contained in the Badge Request Letter is subject to the Privacy Act of 1974 as follows: AUTHORITY: 5 U.S.C. 4501; 10 U.S.C. 1124; EO 9397; PRINCIPAL PURPOSE: to list the names of personnel authorized to perform various functions under this contract. ROUTINE USES: To ensure positive identification of personnel authorized to perform the listed functions. The Social Security Number is needed for this identification.

Disclosure is voluntary, however, failure to supply any required information may cause denial of entry to or delays in processing access onto Niagara Falls ARS.

6.9. Badge Request. Contractor will send a letter to the Contracting Office on company stationery, which will include address, telephone number, and contract number, listing full names of employee(s), with their social security number, date of birth, who require access to Niagara Falls ARS. After approval by Security Forces, this letter will be on file for 30 days and then discarded. Thereafter, anytime a badge is requested for a new employee, an updated employee list will accompany a request letter by the contractor to the contracting office.

6.9.1. Contractor employees will apply for individual identification badges at the Niagara Falls ARS

Security Force Squadron Visitor’s Control Center, Bldg. 893. Badges are processed Monday through Friday from 6:00 a.m. to 2:30 p.m. No appointment is necessary. Upon completion or termination of the contract or termination of a contractor employee, the Contractor will surrender any identification badges and vehicle identification to the Contracting Office the following business day.

6.10. Vehicle Requirement. Proper state vehicle registration, proof of insurance and a valid driver’s license are required to drive on base. After obtaining the proper badges/vehicle identification at the Visitor Control Center (Bldg. 893), all commercial vehicles must enter through the North Gate (Lockport Road), the primary search area for all commercial delivery vehicles.

6.11. Driving and Safety on an Air Force Installation. The Contractor and all employees will comply with Air Force Instruction (AFI) 91-207 “USAF Traffic Safety Program” while on all Niagara Falls ARS.

6.12. LICENSES AND PERMITS. Obtain any necessary licenses and permits, and comply with any federal, state, and municipal laws, codes, and regulations applicable to the performance of work in this PWS.

Contractor will provide proof of such applicable licenses and permits upon request by the government.

6.13. VEHICLES. Contractor vehicles will have the company name prominently displayed on both sides of the vehicles. All vehicle cleaning and maintenance will be done off-base. The Contractor is responsible for cleanup of any vehicle leaks.

SECTION

IV

APPENDI

X

APPENDIX A

LIGHTNING PROTECTION SYSTEM ESTIMATED WORKLOAD DATA

1. ONE-TIME PREVENTIVE INSPECTION AND TESTING SERVICE.

2. REPAIR/REPLACEMENTS: Will be documented in accordance with Paragraph 1.1.6.

APPENDIX B

CONTRACTOR

REPORTS

Report Number

PWS

Paragraph

Name Recipient Report or Cost Estimate Due

1 ALL Maintenance and Findings Reports

Applicable

COR

Within 21 days of completed testing / maintenance

APPENDIX C

ENVIRONMENTALLY PREFERRED PRODUCTS

1. Penetrating lubricants – 68% biobased content

2. Hydraulic fluids-stationary equipment – 44% minimum biobased content

3. Engine lubricating oils – 25% re-refined oil in the basestock

4. Gear lubricants – 25% re-refined oil in the basestock or 58% minimum biobased content

5. Greases – general, 49% minimum biobased content

6. Greases – multipurpose, 72% minimum biobased content

7. Penetrating lubricants, 68% minimum biobased content

8. Corrosion preventatives, 54% minimum biobased content

9. Industrial cleaners, 41% minimum biobased content

10. Industrial drums; steel drums-25-30% recovered steel, including 16% postconsumer content;

Plastic drums-30-100% recovered high density polyethylene, including 30-100% postconsumer content

SCA DETERMINATION

WD 15-4147 (Rev.-6) was first posted on www.wdol.gov on 01/16/2018

REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2015-4147 Daniel W. Simms Division of | Revision No.: 6 Director Wage Determinations| Date Of Revision: 01/10/2018 Note: Under Executive Order (EO) 13658, an hourly minimum wage of $10.35 for calendar year 2018 applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.35 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract in calendar year 2018. The EO minimum wage rate will be adjusted annually.

Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts State: New York

Area: New York Counties of Erie, Niagara **Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations 01011 - Accounting Clerk I 14.47 01012 - Accounting Clerk II 16.25 01013 - Accounting Clerk III 18.18 01020 - Administrative Assistant 26.92 01035 - Court Reporter 22.94 01041 - Customer Service Representative I 13.11 01042 - Customer Service Representative II 14.75 01043 - Customer Service Representative III 16.09 01051 - Data Entry Operator I 14.30 01052 - Data Entry Operator II 15.61 01060 - Dispatcher, Motor Vehicle 17.45 01070 - Document Preparation Clerk 15.43 01090 - Duplicating Machine Operator 15.43 01111 - General Clerk I 12.68 01112 - General Clerk II 13.84 01113 - General Clerk III 15.54 01120 - Housing Referral Assistant 23.17 01141 - Messenger Courier 14.34 01191 - Order Clerk I 15.17 01192 - Order Clerk II 16.55 01261 - Personnel Assistant (Employment) I 15.23 01262 - Personnel Assistant (Employment) II 16.64 01263 - Personnel Assistant (Employment) III 19.97 01270 - Production Control Clerk 22.14 01290 - Rental Clerk 15.23 01300 - Scheduler, Maintenance 18.57 01311 - Secretary I 18.57 01312 - Secretary II 20.77 01313 - Secretary III 23.17 01320 - Service Order Dispatcher 16.05 01410 - Supply Technician 26.92 01420 - Survey Worker 17.82 01460 - Switchboard Operator/Receptionist 14.01 01531 - Travel Clerk I 11.81 01532 - Travel Clerk II 12.46 01533 - Travel Clerk III 13.16 01611 - Word Processor I 14.97 01612 - Word Processor II 15.93 01613 - Word Processor III 17.82 05000 - Automotive Service Occupations

05005 - Automobile Body Repairer, Fiberglass 22.34 05010 - Automotive Electrician 21.67 05040 - Automotive Glass Installer 20.85 05070 - Automotive Worker 20.85 05110 - Mobile Equipment Servicer 19.45 05130 - Motor Equipment Metal Mechanic 22.34 05160 - Motor Equipment Metal Worker 20.85 05190 - Motor Vehicle Mechanic 22.34 05220 - Motor Vehicle Mechanic Helper 18.03 05250 - Motor Vehicle Upholstery Worker 20.11 05280 - Motor Vehicle Wrecker 20.85 05310 - Painter, Automotive 21.67 05340 - Radiator Repair Specialist 20.85 05370 - Tire Repairer 18.78 05400 - Transmission Repair Specialist 22.34 07000 - Food Preparation And Service Occupations 07010 - Baker 11.65 07041 - Cook I 12.92 07042 - Cook II 14.04 07070 - Dishwasher 9.54 07130 - Food Service Worker 9.86 07210 - Meat Cutter 17.29 07260 - Waiter/Waitress 10.86 09000 - Furniture Maintenance And Repair Occupations 09010 - Electrostatic Spray Painter 22.34 09040 - Furniture Handler 17.51 09080 - Furniture Refinisher 22.34 09090 - Furniture Refinisher Helper 19.23 09110 - Furniture Repairer, Minor 20.73 09130 - Upholsterer 22.34 11000 - General Services And Support Occupations 11030 - Cleaner, Vehicles 10.78 11060 - Elevator Operator 12.32 11090 - Gardener 16.78 11122 - Housekeeping Aide 12.70 11150 - Janitor 12.70 11210 - Laborer, Grounds Maintenance 14.30 11240 - Maid or Houseman 10.81 11260 - Pruner 13.27 11270 - Tractor Operator 16.13 11330 - Trail Maintenance Worker 14.30 11360 - Window Cleaner 13.51 12000 - Health Occupations 12010 - Ambulance Driver 15.67 12011 - Breath Alcohol Technician 17.23 12012 - Certified Occupational Therapist Assistant 21.23 12015 - Certified Physical Therapist Assistant 21.92 12020 - Dental Assistant 17.88 12025 - Dental Hygienist 29.85 12030 - EKG Technician 25.84 12035 - Electroneurodiagnostic Technologist 25.84 12040 - Emergency Medical Technician 15.67 12071 - Licensed Practical Nurse I 15.40 12072 - Licensed Practical Nurse II 17.23 12073 - Licensed Practical Nurse III 19.20 12100 - Medical Assistant 16.16 12130 - Medical Laboratory Technician 22.66 12160 - Medical Record Clerk 18.06 12190 - Medical Record Technician 20.20 12195 - Medical Transcriptionist 17.22 12210 - Nuclear Medicine Technologist 34.46 12221 - Nursing Assistant I 11.36 12222 - Nursing Assistant II 12.77 12223 - Nursing Assistant III 13.94 12224 - Nursing Assistant IV 15.66 12235 - Optical Dispenser 22.08 12236 - Optical Technician 15.81 12250 - Pharmacy Technician 14.75 12280 - Phlebotomist 16.47 12305 - Radiologic Technologist 27.83

12311 - Registered Nurse I 23.63 12312 - Registered Nurse II 28.90 12313 - Registered Nurse II, Specialist 28.90 12314 - Registered Nurse III 34.96 12315 - Registered Nurse III, Anesthetist 34.96 12316 - Registered Nurse IV 41.90 12317 - Scheduler (Drug and Alcohol Testing) 21.04 12320 - Substance Abuse Treatment Counselor 19.09 13000 - Information And Arts Occupations 13011 - Exhibits Specialist I 18.91 13012 - Exhibits Specialist II 23.40 13013 - Exhibits Specialist III 28.53 13041 - Illustrator I 19.84 13042 - Illustrator II 24.54 13043 - Illustrator III 29.93 13047 - Librarian 26.64 13050 - Library Aide/Clerk 15.63 13054 - Library Information Technology Systems 23.54 Administrator 13058 - Library Technician 15.75 13061 - Media Specialist I 17.36 13062 - Media Specialist II 19.42 13063 - Media Specialist III 21.66 13071 - Photographer I 15.55 13072 - Photographer II 18.33 13073 - Photographer III 22.70 13074 - Photographer IV 27.77 13075 - Photographer V 33.60 13090 - Technical Order Library Clerk 19.64 13110 - Video Teleconference Technician 22.42 14000 - Information Technology Occupations 14041 - Computer Operator I 15.77 14042 - Computer Operator II 17.64 14043 - Computer Operator III 20.20 14044 - Computer Operator IV 23.94 14045 - Computer Operator V 26.51 14071 - Computer Programmer I 20.28 14072 - Computer Programmer II 25.12 14073 - Computer Programmer III (see 1) 14074 - Computer Programmer IV (see 1) 14101 - Computer Systems Analyst I (see 1) 14102 - Computer Systems Analyst II (see 1) 14103 - Computer Systems Analyst III (see 1) 14150 - Peripheral Equipment Operator 15.77 14160 - Personal Computer Support Technician 23.94 14170 - System Support Specialist 28.18 15000 - Instructional Occupations 15010 - Aircrew Training Devices Instructor (Non-Rated) 29.04 15020 - Aircrew Training Devices Instructor (Rated) 35.13 15030 - Air Crew Training Devices Instructor (Pilot) 42.11 15050 - Computer Based Training Specialist / Instructor 29.04 15060 - Educational Technologist 28.39 15070 - Flight Instructor (Pilot) 41.52 15080 - Graphic Artist 20.00 15085 - Maintenance Test Pilot, Fixed, Jet/Prop 39.06 15086 - Maintenance Test Pilot, Rotary Wing 39.06 15088 - Non-Maintenance Test/Co-Pilot 39.06 15090 - Technical Instructor 21.82 15095 - Technical Instructor/Course Developer 26.69 15110 - Test Proctor 17.62 15120 - Tutor 17.62 16000 - Laundry, Dry-Cleaning, Pressing And Related Occupations 16010 - Assembler 10.54 16030 - Counter Attendant 10.54 16040 - Dry Cleaner 12.14 16070 - Finisher, Flatwork, Machine 10.54 16090 - Presser, Hand 10.54 16110 - Presser, Machine, Drycleaning 10.54 16130 - Presser, Machine, Shirts 10.54 16160 - Presser, Machine, Wearing Apparel, Laundry 10.54

16190 - Sewing Machine Operator 12.65 16220 - Tailor 13.16 16250 - Washer, Machine 11.12 19000 - Machine Tool Operation And Repair Occupations 19010 - Machine-Tool Operator (Tool Room) 26.32 19040 - Tool And Die Maker 29.84 21000 - Materials Handling And Packing Occupations 21020 - Forklift Operator 18.06 21030 - Material Coordinator 22.14 21040 - Material Expediter 22.14 21050 - Material Handling Laborer 17.74 21071 - Order Filler 15.19 21080 - Production Line Worker (Food Processing) 18.06 21110 - Shipping Packer 14.98 21130 - Shipping/Receiving Clerk 14.95 21140 - Store Worker I 16.72 21150 - Stock Clerk 21.04 21210 - Tools And Parts Attendant 18.06 21410 - Warehouse Specialist 18.06 23000 - Mechanics And Maintenance And Repair Occupations 23010 - Aerospace Structural Welder 29.91 23019 - Aircraft Logs and Records Technician 26.32 23021 - Aircraft Mechanic I 28.88 23022 - Aircraft Mechanic II 29.91 23023 - Aircraft Mechanic III 30.75 23040 - Aircraft Mechanic Helper 23.76 23050 - Aircraft, Painter 27.96 23060 - Aircraft Servicer 25.99 23070 - Aircraft Survival Flight Equipment Technician 27.96 23080 - Aircraft Worker 27.01 23091 - Aircrew Life Support Equipment (ALSE) Mechanic 27.01 I 23092 - Aircrew Life Support Equipment (ALSE) Mechanic 28.88

II

23110 - Appliance Mechanic 21.53 23120 - Bicycle Repairer 20.88 23125 - Cable Splicer 35.06 23130 - Carpenter, Maintenance 20.64 23140 - Carpet Layer 24.59 23160 - Electrician, Maintenance 30.13 23181 - Electronics Technician Maintenance I 25.58 23182 - Electronics Technician Maintenance II 26.48 23183 - Electronics Technician Maintenance III 27.35 23260 - Fabric Worker 23.67 23290 - Fire Alarm System Mechanic 22.43 23310 - Fire Extinguisher Repairer 22.64 23311 - Fuel Distribution System Mechanic 33.97 23312 - Fuel Distribution System Operator 27.81 23370 - General Maintenance Worker 20.01 23380 - Ground Support Equipment Mechanic 28.88 23381 - Ground Support Equipment Servicer 25.99 23382 - Ground Support Equipment Worker 27.01 23391 - Gunsmith I 22.64 23392 - Gunsmith II 24.59 23393 - Gunsmith III 26.30 23410 - Heating, Ventilation And Air-Conditioning 21.28 Mechanic 23411 - Heating, Ventilation And Air Contidioning 23.06 Mechanic (Research Facility) 23430 - Heavy Equipment Mechanic 23.10 23440 - Heavy Equipment Operator 28.65 23460 - Instrument Mechanic 25.74 23465 - Laboratory/Shelter Mechanic 25.46 23470 - Laborer 13.61 23510 - Locksmith 20.64 23530 - Machinery Maintenance Mechanic 25.55 23550 - Machinist, Maintenance 21.28 23580 - Maintenance Trades Helper 18.51 23591 - Metrology Technician I 25.74 23592 - Metrology Technician II 26.65

23593 - Metrology Technician III 27.41 23640 - Millwright 32.96 23710 - Office Appliance Repairer 20.64 23760 - Painter, Maintenance 22.13 23790 - Pipefitter, Maintenance 29.14 23810 - Plumber, Maintenance 28.21 23820 - Pneudraulic Systems Mechanic 26.30 23850 - Rigger 26.30 23870 - Scale Mechanic 24.59 23890 - Sheet-Metal Worker, Maintenance 25.34 23910 - Small Engine Mechanic 19.86 23931 - Telecommunications Mechanic I 28.26 23932 - Telecommunications Mechanic II 29.26 23950 - Telephone Lineman 30.69 23960 - Welder, Combination, Maintenance 21.28 23965 - Well Driller 28.93 23970 - Woodcraft Worker 26.30 23980 - Woodworker 22.64 24000 - Personal Needs Occupations 24550 - Case Manager 14.36 24570 - Child Care Attendant 10.03 24580 - Child Care Center Clerk 12.55 24610 - Chore Aide 11.41 24620 - Family Readiness And Support Services 14.36 Coordinator 24630 - Homemaker 14.36 25000 - Plant And System Operations Occupations 25010 - Boiler Tender 25.88 25040 - Sewage Plant Operator 24.00 25070 - Stationary Engineer 25.88 25190 - Ventilation Equipment Tender 21.29 25210 - Water Treatment Plant Operator 24.00 27000 - Protective Service Occupations 27004 - Alarm Monitor 20.23 27007 - Baggage Inspector 11.54 27008 - Corrections Officer 31.12 27010 - Court Security Officer 31.55 27030 - Detection Dog Handler 15.49 27040 - Detention Officer 31.12 27070 - Firefighter 28.78 27101 - Guard I 11.54 27102 - Guard II 15.49 27131 - Police Officer I 29.22 27132 - Police Officer II 32.47 28000 - Recreation Occupations 28041 - Carnival Equipment Operator 12.14 28042 - Carnival Equipment Repairer 12.70 28043 - Carnival Worker 9.83 28210 - Gate Attendant/Gate Tender 12.14 28310 - Lifeguard 10.82 28350 - Park Attendant (Aide) 14.24 28510 - Recreation Aide/Health Facility Attendant 9.91 28515 - Recreation Specialist 16.53 28630 - Sports Official 11.34 28690 - Swimming Pool Operator 15.97 29000 - Stevedoring/Longshoremen Occupational Services 29010 - Blocker And Bracer 26.86 29020 - Hatch Tender 26.86 29030 - Line Handler 26.86 29041 - Stevedore I 25.88 29042 - Stevedore II 27.82 30000 - Technical Occupations 30010 - Air Traffic Control Specialist, Center (HFO) (see 2) 38.69 30011 - Air Traffic Control Specialist, Station (HFO) (see 2) 26.68 30012 - Air Traffic Control Specialist, Terminal (HFO) (see 2) 29.38 30021 - Archeological Technician I 18.65 30022 - Archeological Technician II 20.86 30023 - Archeological Technician III 25.84 30030 - Cartographic Technician 25.84 30040 - Civil Engineering Technician 25.73

30051 - Cryogenic Technician I 26.05 30052 - Cryogenic Technician II 28.77 30061 - Drafter/CAD Operator I 18.65 30062 - Drafter/CAD Operator II 20.86 30063 - Drafter/CAD Operator III 23.26 30064 - Drafter/CAD Operator IV 28.63 30081 - Engineering Technician I 19.15 30082 - Engineering Technician II 21.49 30083 - Engineering Technician III 24.04 30084 - Engineering Technician IV 29.79 30085 - Engineering Technician V 36.44 30086 - Engineering Technician VI 37.46 30090 - Environmental Technician 18.48 30095 - Evidence Control Specialist 23.52 30210 - Laboratory Technician 21.91 30221 - Latent Fingerprint Technician I 26.05 30222 - Latent Fingerprint Technician II 28.77 30240 - Mathematical Technician 25.84 30361 - Paralegal/Legal Assistant I 19.64 30362 - Paralegal/Legal Assistant II 24.33 30363 - Paralegal/Legal Assistant III 29.77 30364 - Paralegal/Legal Assistant IV 36.00 30375 - Petroleum Supply Specialist 30.83 30390 - Photo-Optics Technician 25.84 30395 - Radiation Control Technician 28.77 30461 - Technical Writer I 24.27 30462 - Technical Writer II 27.31 30463 - Technical Writer III 33.08 30491 - Unexploded Ordnance (UXO) Technician I 24.59 30492 - Unexploded Ordnance (UXO) Technician II 29.75 30493 - Unexploded Ordnance (UXO) Technician III 35.66 30494 - Unexploded (UXO) Safety Escort 24.59 30495 - Unexploded (UXO) Sweep Personnel 24.59 30501 - Weather Forecaster I 26.05 30502 - Weather Forecaster II 31.69 30620 - Weather Observer, Combined Upper Air Or (see 2) 23.26 Surface Programs 30621 - Weather Observer, Senior (see 2) 25.84 31000 - Transportation/Mobile Equipment Operation Occupations 31010 - Airplane Pilot 29.75 31020 - Bus Aide 14.67 31030 - Bus Driver 18.40 31043 - Driver Courier 16.62 31260 - Parking and Lot Attendant 10.85 31290 - Shuttle Bus Driver 17.39 31310 - Taxi Driver 12.54 31361 - Truckdriver, Light 17.39 31362 - Truckdriver, Medium 20.24 31363 - Truckdriver, Heavy 22.34 31364 - Truckdriver, Tractor-Trailer 22.34 99000 - Miscellaneous Occupations 99020 - Cabin Safety Specialist 14.51 99030 - Cashier 10.21 99050 - Desk Clerk 10.95 99095 - Embalmer 27.92 99130 - Flight Follower 24.59 99251 - Laboratory Animal Caretaker I 12.21 99252 - Laboratory Animal Caretaker II 12.77 99260 - Marketing Analyst 28.25 99310 - Mortician 27.92 99410 - Pest Controller 18.54 99510 - Photofinishing Worker 13.78 99710 - Recycling Laborer 21.81 99711 - Recycling Specialist 24.97 99730 - Refuse Collector 20.23 99810 - Sales Clerk 12.42 99820 - School Crossing Guard 11.09 99830 - Survey Party Chief 22.60 99831 - Surveying Aide 11.67 99832 - Surveying Technician 18.36

99840 - Vending Machine Attendant 15.09 99841 - Vending Machine Repairer 17.25 99842 - Vending Machine Repairer Helper 15.09

Note: Executive Order (EO) 13706, Establishing Paid Sick Leave for Federal Contractors, applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2017. If this contract is covered by the EO, the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work, up to 56 hours of paid sick leave each year. Employees must be permitted to use paid sick leave for their own illness, injury or other health-related needs, including preventive care; to assist a family member (or person who is like family to the employee) who is ill, injured, or has other health-related needs, including preventive care; or for reasons resulting from, or to assist a family member (or person who is like family to the employee) who is the victim of, domestic violence, sexual assault, or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: $4.41 per hour or $176.40 per week or $764.40 per month

HEALTH & WELFARE EO 13706: $4.13 per hour, or $165.20 per week, or $715.87 per month*

*This rate is to be used only when compensating employees for performance on an SCA-covered contract also covered by EO 13706, Establishing Paid Sick Leave for Federal Contractors. A contractor may not receive credit toward its SCA obligations for any paid sick leave provided pursuant to EO 13706.

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor; 3 weeks after 5 years, 4 weeks after 15 years, and 5 weeks after 25 years.

Length of service includes the whole span of continuous service with the present contractor or successor, wherever employed, and with the predecessor contractors in the performance of similar work at the same Federal facility. (Reg. 29 CFR 4.173)

HOLIDAYS: A minimum of eleven paid holidays per year: New Year's Day, Martin Luther King Jr's Birthday, Washington's Birthday, Good Friday, Memorial Day, Independence Day, Labor Day, Columbus Day, Veterans' Day, Thanksgiving Day, and Christmas Day. A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.)

(See 29 CFR 4.174)

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE FOLLOWING:

1) COMPUTER EMPLOYEES: Under the SCA at section 8(b), this wage determination does not apply to any employee who individually qualifies as a bona fide executive, administrative, or professional employee as defined in 29 C.F.R. Part 541. Because most Computer System Analysts and Computer Programmers who are compensated at a rate not less than $27.63 (or on a salary or fee basis at a rate not less than $455 per week) an hour would likely qualify as exempt computer professionals, (29 C.F.R. 541.

400) wage rates may not be listed on this wage determination for all occupations within those job families. In addition, because this wage determination may not list a wage rate for some or all occupations within those job families if the survey data indicates that the prevailing wage rate for the occupation equals or exceeds $27.63 per hour conformances may be necessary for certain nonexempt employees. For example, if an individual employee is nonexempt but nevertheless performs duties within the scope of one of the Computer Systems Analyst or Computer Programmer occupations for which this wage determination does not specify an SCA wage rate, then the wage rate for that employee must be conformed in accordance with the conformance procedures described in the conformance note included on this wage determination.

Additionally, because job titles vary widely and change quickly in the computer industry, job titles are not determinative of the application of the computer professional exemption. Therefore, the exemption applies only to computer employees who satisfy the compensation requirements and whose primary duty consists of:

(1) The application of systems analysis techniques and procedures, including consulting with users, to determine hardware, software or system functional specifications;

(2) The design, development, documentation, analysis, creation, testing or modification of computer systems or programs, including prototypes, based on and related to user or system design specifications;

(3) The design, documentation, testing, creation or modification of computer programs related to machine operating systems; or

(4) A combination of the aforementioned duties, the performance of which requires the same level of skills. (29 C.F.R. 541.400).

2) AIR TRAFFIC CONTROLLERS AND WEATHER OBSERVERS - NIGHT PAY & SUNDAY PAY: If you work at night as part of a regular tour of duty, you will earn a night differential and receive an additional 10% of basic pay for any hours worked between 6pm and 6am.

If you are a full-time employed (40 hours a week) and Sunday is part of your regularly scheduled workweek, you are paid at your rate of basic pay plus a Sunday premium of 25% of your basic rate for each hour of Sunday work which is not overtime (i.e. occasional work on Sunday outside the normal tour of duty is considered overtime work).

** HAZARDOUS PAY DIFFERENTIAL **

An 8 percent differential is applicable to employees employed in a position that represents a high degree of hazard when working with or in close proximity to ordnance, explosives, and incendiary materials. This includes work such as screening, blending, dying, mixing, and pressing of sensitive ordnance, explosives, and pyrotechnic compositions such as lead azide, black powder and photoflash powder.

All dry-house activities involving propellants or explosives. Demilitarization, modification, renovation, demolition, and maintenance operations on sensitive ordnance, explosives and incendiary materials. All operations involving re-grading and cleaning of artillery ranges.

A 4 percent differential is applicable to employees employed in a position that represents a low degree of hazard when working with, or in close proximity to ordnance, (or employees possibly adjacent to) explosives and incendiary materials which involves potential injury such as laceration of hands, face, or arms of the employee engaged in the operation, irritation of the skin, minor burns and the like;

minimal damage to immediate or adjacent work area or equipment being used. All operations involving, unloading, storage, and hauling of ordnance, explosive, and incendiary ordnance material other than small arms ammunition. These differentials are only applicable to work that has been specifically designated by the agency for ordnance, explosives, and incendiary material differential pay.

** UNIFORM ALLOWANCE **

If employees are required to wear uniforms in the performance of this contract (either by the terms of the Government contract, by the employer, by the state or local law, etc.), the cost of furnishing such uniforms and maintaining (by laundering or dry cleaning) such uniforms is an expense that may not be borne by an employee where such cost reduces the hourly rate below that required by the wage determination. The Department of Labor will accept payment in accordance with the following standards as compliance:

The contractor or subcontractor is required to furnish all employees with an adequate number of uniforms without cost or to reimburse employees…