A7_Solicitation___W912PQ16T0014.pdf

SEE ADDENDUM

(No Collect Calls)

W912PQ-16-T-0014 23-Feb-2016

b. TELEPHONE NUMBER

716-236-2520

8. OFFER DUE DATE/LOCAL TIME

01:00 PM 14 Mar 2016

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

W912PQ9. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

PHILIP J ROTT

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

0 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

F9GGGA6005AW01

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED OR X

SMALL BUSINESSX

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

W912PQ- 107TH AW/MSC

9910 BLEWETT AVE

NIAGARA FALLS NY 14304-6001

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE F9GGGA 16. ADMINISTERED BY

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

NY AIR NATIONAL GUARD - 174 FW

DAN MELIE

366 OTIS ST

BLDG 703

ROME NY 13441

TEL: 315-334-6142 FAX:

716-236-3043FAX:

TEL: 716-236-2493 SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

$7,500,000

NAICS:

811310

X

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF60

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

W912PQ-16-T-0014

Section B - Supplies or Services and Prices

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 4 Job

ACTIVE BARRIER MAINTENANCE - BASE PERIOD

FFP

Contractor shall perform quarterly and annual preventive maintenance of all Active Barrier Gate "GRAB-400" components in accordance with the attached performance work statement

Period of performance: 1 May 2016 through 30 April 2017

Incorporating Service Contract Act Wage Determination 05-2383 Revision 18 first posted to www.dwol.gov on 5 Jan 2016. The most current wage determination will apply at time of award.

Invoicing will be quarterly:

1 May 2016 - 31 July 2016 1 Aug 2016 - 31 October 2016 1 November 2016 - 31 January 2017 1 February 2017 - 30 April 2017

FOB: Destination

MILSTRIP: F9GGGA6005AW0100

PURCHASE REQUEST NUMBER: F9GGGA6005AW01

SIGNAL CODE: A

NET AMT

0002 4 Job

OPTION ACTIVE BARRIER MAINTENANCE - OPTION 1

FFP

Contractor shall perform quarterly and annual preventive maintenance of all Active Barrier Gate "GRAB-400" components in accordance with the attached performance work statement

Period of performance: 1 May 2017 through 30 April 2018

Incorporating Service Contract Act Wage Determination 05-2383 Revision 18 first posted to www.dwol.gov on 5 Jan 2016. The most current wage determination will apply at time of award.

Invoicing will be quarterly:

1 May 2017 - 31 July 2017 1 Aug 2017 - 31 October 2017 1 November 2017 - 31 January 2018 1 February 2018 - 30 April 2018

FOB: Destination

0003 4 Job

OPTION ACTIVE BARRIER MAINTENANCE - OPTION 2

FFP

Contractor shall perform quarterly and annual preventive maintenance of all Active Barrier Gate "GRAB-400" components in accordance with the attached performance work statement

Period of performance: 1 May 2018 through 30 April 2019

Incorporating Service Contract Act Wage Determination 05-2383 Revision 18 first posted to www.dwol.gov on 5 Jan 2016. The most current wage determination will apply at time of award.

Invoicing will be quarterly:

1 May 2018 - 31 July 2018 1 Aug 2018 - 31 October 2018 1 November 2018 - 31 January 2019 1 February 2019 - 30 April 2019

0004 4 Job

OPTION ACTIVE BARRIER MAINTENANCE - OPTION 3

FFP

Contractor shall perform quarterly and annual preventive maintenance of all Active Barrier Gate "GRAB-400" components in accordance with the attached performance work statement

Period of performance: 1 May 2019 through 30 April 2020

Incorporating Service Contract Act Wage Determination 05-2383 Revision 18 first posted to www.dwol.gov on 5 Jan 2016. The most current wage determination will apply at time of award.

Invoicing will be quarterly:

1 May 2019 - 31 July 2019 1 Aug 2019 - 31 October 2019 1 November 2019 - 31 January 2020 1 February 2020 - 30 April 2020

Section C - Descriptions and Specifications

PERFORMANCE WORK STATEMENT

PERFORMANCE WORK STATEMENT (PWS)

Active Barrier Gate Maintenance

EASTERN AIR DEFENSE SECTOR

INTRUSION DETECTION SYSTEM

GRIFFISS BUSINESS AND TECHNOLOGY PARK

BUILDING 700

362 OTIS STREET

ROME, NEW YORK 13441-4812

1.0 General

2.0 Definitions and Acronyms

3.0 Government Furnished Property, Material, Equipment and Services (GFP/M/E/S)

4.0 Contractor Furnished Property, Materials, and Equipment (CFP/M/E)

5.0 Requirements

6.0 Applicable Publications

TECHNICAL EXHIBIT 1 - Performance Requirements Summary (PRS) TECHNICAL EXHIBIT 2 - Deliverables Schedule

PERFORMANCE WORK STATEMENT (PWS)

FOR

Active Barrier Gate Maintenance

1.0 General:

1.1 Scope: The contractor shall provide all personnel, supervision and labor necessary to maintain the Active Barrier Gate System, except as specified in Paragraph

3.0 as Government. At the Eastern Air Defense Sector (EADS), 366 Otis Street, Rome, New York 13441-4812 on the Griffiss Business and Technology Park, Rome, New York 13441 Services, as defined in this PWS.

1.2 Background: System must be maintained.

1.3 Period of Performance (PoP): The Period of Performance shall be one Base Year of 12 months and three (3) 12-month option years. The Period of Performance reads as follows:

Base Year: 1 May 2016 through 30 Apr 2017 Option Year 1: 1 May 2017 through 30 Apr 2018 Option Year 2: 1 May 2018 through 30 Apr 2019 Option Year 3: 1 May 2019 through 30 Apr 2020

1.4 General Information:

1.4.1 Quality Control (QC): The contractor shall develop and maintain an effective QC Plan (QCP) to ensure services are performed in accordance with this PWS. The contractor shall develop and implement procedures to identify, prevent, and ensure non-recurrence of defective services. The contractor’s QCP is the means by which it assures itself that its work complies with the requirements of the contract. As a minimum, the contractor shall develop QC procedures that address the areas identified in Technical Exhibit 1, Performance Requirements Summary. After acceptance of the QCP, the contractor shall obtain the Contracting Officer’s (KO) acceptance in writing of any proposed changes to its QCP.

1.4.2 Recognized Holidays: The following are recognized US holidays. The contractor shall not perform services on these days:

1.4.2.1 New Year’s Day: January 1st

1.4.2.2 Martin Luther King, Jr.’s Birthday

1.4.2.3 President’s Day

1.4.2.4 Memorial Day

1.4.2.5 Independence Day: July 4th

1.4.2.6 Labor Day

1.4.2.7 Columbus Day

1.4.2.8 Veteran’s Day: November 11th

1.4.2.9 Thanksgiving Day

1.4.2.10 Christmas Day

1.4.3 Place and Performance of Services: The contractor shall provide services between the hours of 0700-1600 on Monday through Friday, except on recognized US holidays or when the Government facility/installation is closed due to local or national emergencies, administrative closings, or similar Government-directed facility/installation closings. Performance shall be at EADS. The contractor shall at all times maintain an adequate work force for the uninterrupted performance of all tasks defined within this PWS when the Government facility/installation is not closed for the above reasons.

When hiring personnel, the contractor shall keep in mind that the stability and continuity of the work force are essential.

1.4.3.1 Unscheduled gate closures by the Security Police may occur at any time causing all personnel entering or exiting a closed installation to experience a delay. This cannot be predicted or prevented. Contractors are not compensated for unexpected closures or delays. Vehicles operated by contractor personnel are subject to search pursuant to applicable regulations. Any moving violation of any applicable motor vehicle regulation may result in the termination of the contractor employee’s installation driving privileges.

1.4.3.2 The contractor’s employees shall become familiar with and obey the regulations of the installation; including fire, traffic, safety and security regulations while on the installation. Contractor employees should only enter restricted areas when required to do so and only upon prior approval. All contractor employees shall carry proper identification with them at all times. The contractor shall ensure compliance with all regulations and orders of the installation which may affect performance.

1.4.4 Security Requirements. The contractor shall comply with all applicable installation/facility access and local security policies and procedures, which may be obtained from the Contracting Officer’s Representative (COR). The contractor shall also provide all information required for background checks to meet installation access requirements to be accomplished by installation Provost Marshal Office, Director of Emergency Services or Security Office. The contractor shall ensure compliance with all personal identity verification requirements as directed by DOD, HQDA and/or local policy. Should the Force Protection Condition (FPCON) change, the Government may require changes in contractor security matters or processes.

1.4.4.1 COMSEC/IT Security. All communications with DOD organizations are subject to communications security (COMSEC) review. All telephone communications networks are continually subject to intercept by unfriendly intelligence organizations. DOD has authorized the military departments to conduct COMSEC monitoring and recording of telephone calls originating from, or terminating at, DOD organizations. Therefore, the contractor is advised that any time contractor place or receive a call they are subject to COMSEC procedures. The contractor shall ensure wide and frequent dissemination of the above information to all employees dealing with DOD information. The contractor shall abide by all Government regulations concerning the authorized use of the Government's computer network, including the restriction against using the network to recruit Government personnel or advertise job openings.

1.4.4.2 Protection of Personally Identifiable Information (PII). The contractor shall protect all Personally Identifiable Information (PII) encountered in the performance of services in accordance with DFARS 224.103 and DoDD 5400.11, Department of Defense Privacy Program, and DoD 5400.11-R. If a PII breach results from the contractor’s violation of the aforementioned policies, the contractor shall bear all notification costs, call-center support costs, and credit monitoring service costs for all individuals who’s PII has been compromised.

1.4.4.3 Physical Security. The contractor shall safeguard all Government property provided for contractor use. At the close of each work period, Government facilities, equipment and materials shall be secured.

1.4.5 Special Qualifications: Contractor must possess and demonstrate a working knowledge of the GRAB Active Barrier System and Maintenance.

1.4.6 Post Award Conference/Periodic Progress Meetings: The contractor agrees to attend any post award conference convened by the KO in accordance with Federal Acquisition Regulations Subpart 42.5. The KO, Contracting Officer’s Representative (COR), and other Government personnel, as appropriate, may meet periodically with the contractor to review the contactor’s performance. At these meetings, the Contacting Officer will apprise the contractor of how the Government views the contractor’s performance and the contractor shall apprise the Government of problems, if any, being experienced The contractor shall resolve outstanding issues raised by the Government.

Contractor attendance at these meetings shall be at no additional cost to the Government.

1.4.7 Contract Manager (CM): The contactor shall provide a CM who shall ensure performance under this contract. The name of this person, and an alternate who shall act for the contractor when the CM is absent, shall be designated in writing to the KO.

The CM or alternate shall have full authority to act for the contractor on all contract matters relating to daily operation of this contract. The CM shall work through the COR, (or the KO if a COR is not assigned), to resolve issues, receive directions and ensure adequate performance of services. The CM shall ensure that contractor employees do not perform any services outside the scope of the contract without an official modification issued by the KO. The CM shall ensure contractor employees understand that services performed outside the scope of the contract are performed wholly at the expense of the contractor.

1.4.8 Identification of Contractor Employees: All contractor personnel attending meetings, answering Government telephones and working in other situations where their contractor status is not obvious to third parties are required to identify themselves as such to avoid creating an impression that they are Government employees. The contractor shall ensure that all documents or reports produced by contractor personnel are suitably marked as contractor products or that contractor participation is appropriately disclosed. Contractor personnel shall wear identification badges distinguishing themselves as such. The badges shall have the company name, employee name and the word “contractor” displayed. The contractor shall retrieve all identification media (including vehicle passes) from their employees who depart employment for any reason. All identification media (i.e., badges and vehicles passes) shall be returned to the KO within 14 days of an employee’s departure.

1.4.9 Combating Trafficking in Persons: The United States Government has adopted a zero tolerance policy regarding trafficking in persons. Contractors and contractor employees shall not engage in severe forms of trafficking in persons during the period of performance of the contract; procure commercial sex acts during the period of performance of the contract; or use forced labor in the performance of the contract. The Contractor shall notify its employees of the United States Government’s zero tolerance policy, the actions that will be taken against employees for violations of this policy. Such actions may include, but are not limited to, removal from the contract, reduction in benefits, or termination of employment. The Contractor shall take appropriate action, up to and including termination, against employees or subcontractors that violate the US Government policy as described at FAR 22.17.

1.4.10 Data Rights: The Government has unlimited rights to all documents/material produced under this contract. All documents and materials, to include the source codes of any software, produced under this contract shall be Government owned and are the property of the Government with all rights and privileges of ownership/copyright belonging exclusively to the Government. These documents and materials may not be used or sold by the contractor without written permission from the KO. All materials supplied to the Government shall be the sole property of the Government and may not be used for any other purpose. This right does not abrogate any other Government rights.

1.4.11 Organizational Conflicts of Interest (OCI): The contractor and subcontractor personnel performing services under this contract may receive, have access to or participate in the development of proprietary or source selection information (e.g., cost or pricing information, budget information or analyses, specifications or work statements, etc.) or perform evaluation services which may create a current or subsequent OCIs, as defined in FAR Subpart 9.5. The contractor shall notify the KO immediately whenever it becomes aware that such access or participation may result in any actual or potential OCI and shall promptly submit a plan to the KO to avoid or mitigate any such OCI. The contractor’s mitigation plan will be determined to be acceptable solely at the discretion of the KO and in the event the KO unilaterally determines that any such OCI cannot be satisfactorily avoided or mitigated, the KO may affect other remedies as he or she deems necessary, including prohibiting the contractor from participation in subsequent contracted requirements which may be affected by the OCI.

2.0 Definitions and Acronyms:

2.1.1 CONTRACTOR. A supplier or vendor awarded a contract to provide specific supplies or service to the government. The term used in this contract refers to the prime.

2.1.2 CONTRACTING OFFICER (KO). A person with authority to enter into, administer, and or terminate contracts, and make related determinations and findings on behalf of the government. Note: The only individual who can legally bind the government.

2.1.3 CONTRACTING OFFICER'S REPRESENTATIVE (COR). An employee of the U.S. Government designated by the KO to monitor contractor performance. Such appointment shall be in writing and shall state the scope of authority and limitations.

This individual has authority to provide technical direction to the Contractor as long as that direction is within the scope of the contract, does not constitute a change, and has no funding implications. This individual does NOT have authority to change the terms and conditions of the contract.

2.1.4 DEFECTIVE SERVICE. A service output that does not meet the standard of performance associated with the Performance Work Statement.

2.1.5 DELIVERABLE. Anything that can be physically delivered and includes non-manufactured things such as meeting minutes or reports.

2.1.6 KEY PERSONNEL. Contractor personnel that are evaluated in a source selection process and that may be required to be used in the performance of a contract by the Key Personnel listed in the PWS. When key personnel are used as an evaluation factor in best value procurement, an offer can be rejected if it does not have a firm commitment from the persons that are listed in the proposal.

2.1.7 PHYSICAL SECURITY. Actions that prevent the loss or damage of Government property.

2.1.8 QUALITY ASSURANCE. The government procedures to verify that services being performed by the Contractor are performed according to acceptable standards.

2.1.9 QUALITY ASSURANCE SURVEILLANCE PLAN (QASP). An organized written document specifying the surveillance methodology to be used for surveillance of contractor performance.

2.1.10 QUALITY CONTROL. All necessary measures taken by the Contractor to assure that the quality of an end product or service shall meet contract requirements.

2.1.11 SUBCONTRACTOR. One that enters into a contract with a prime contractor. The Government does not have privity of contract with the subcontractor.

2.1.12 WORK DAY. The number of hours per day the Contractor provides services in accordance with the contract.

2.1.13 WORK WEEK. Monday through Friday, unless specified otherwise.

2.2 ACRONYMS:

AEI

AFARS Army Federal Acquisition Regulation Supplement AR Army Regulation AT/OPSEC Antiterrorism/Operational Security CFR Code of Federal Regulations CONUS Continental United States (excludes Alaska and Hawaii) COR Contracting Officer Representative COTS Commercial-Off-the-Shelf DA Department of the Army DD250 Department of Defense Form 250 (Receiving Report) DD254 Department of Defense Contract Security Requirement List DFARS Defense Federal Acquisition Regulation Supplement DOD Department of Defense ESS Electronic Sensor System FAR Federal Acquisition Regulation GFP/M/E/S Government Furnished Property/Material/Equipment/Services IA Information Assurance IS Information System(s) KO Contracting Officer OCI Organizational Conflict of Interest ODC Other Direct Costs PII Personally Identifiable Information PIPO Phase In/Phase Out POC Point of Contact PRS Performance Requirements Summary PWS Performance Work Statement QA Quality Assurance QAP Quality Assurance Program QASP Quality Assurance Surveillance Plan QC Quality Control QCP Quality Control Program TE Technical Exhibit

3.0 Government Furnished Property, Material, Equipment and Services (GFP/M/E/S):

The Government will provide the property, material, equipment, and/or services listed below solely for the purpose of performance under this contract:

3.1 Property: None

3.2 Materials: N/A

3.3 Equipment: None

3.4 Services: N/A

3.5 Utilities: All utilities in the facility will be available for the contactor’s use in the performance of this contract. The contractor shall instruct employees in utilities conservation practices. The contractor shall operate under conditions that preclude the waste of utilities, which include turning off the water faucets or valves after using the required amount.

4.0 Contractor Furnished Property, Materials, and Equipment (CFP/M/E):

4.1 General: Except for those items specifically stated to be Government-Furnished in Paragraph 3.0, the contractor shall furnish everything required to perform these services as indicated in Paragraph 1.1. The contractor will provide the government representative a list of suggested spare parts, based on previous years’ service requirements and life expectancy of equipment, for the period of the contract (full year).

4.2 Shop Drawings: Indicate non-typical wiring diagram showing each device and wiring connection and battery calculations. Product Data: Submit catalog data showing electrical characteristics and connection requirements. Test Reports: Indicate procedures and results for specified field testing and inspection. Contractor shall submit a copy of all service actions, mark-ups, and test and/or service reports when requested by the government. All records remain the property of the government and are to be turned over when requested by the government or at the conclusion of the contract.

5.0 Requirements: The contractor shall: The contractor shall provide service on the Active Barrier Gate (AVB) system to ensure proper operational condition at all times.

Service includes preventative service, normal service and emergency service, and replacement of component parts.

5.1.0 The contractor shall perform Quarterly Preventive Maintenance: Test and verify that all accessory safety detection equipment is working properly, Test and verify that all safety warning equipment is working properly, Apply high‐grade lithium grease to all grease fittings, Inspect net pits for wear, debris and uniformity, Clean and remove net pads and remove all debris, Test all barrier functions for proper use, Check proximity switches, Inspect the net for wear or possible damages, Inspect the net encasements for wear or possible damage, Inspect anchor stanchions for possible damage or excessive wear, Test all functions of all operator stations and main panel, Check BCP fan and thermostat operation, Inspect concrete foundations for settling, Verify the net is properly tensioned, Tighten nuts and bolts as necessary applying correct torque to all connecting bolts, Inspect all ground anchors, Check for rust‐sand and identify areas that require touch up paint, Inspect all electrical, control and operator panels for loose screws, buttons, and electrical components and tighten if necessary and Check all wire terminations and tighten as required.

5.1.1 The contractor shall perform Annual Preventive Maintenance: Perform all tasks listed above in the quarterly maintenance checklist, Replace shear pins (requires removal of existing shear pins, installation of new shear pins, tensioning turnbuckles, and verification of net tension per Maintenance Manual).

5.1.2 A “Scheduled Service Call” is any scheduled preventive maintenance visit to EADS, Rome NY to perform Services as described in Section 5.0 through 5.1.1 above.

There will be no charge for scheduled service calls performed in conjunction with any scheduled preventative maintenance. An “Unscheduled Service Call” is any request by EADS for service to include any evaluation, service, and/or repair needing immediate response, sooner than the next scheduled preventative maintenance and will need written approval from an authorized government representative.

5.1.3 Contractor will inspect the GRAB 400 system systems before accepting them under the contract.

5.2 Contractor Manpower Reporting Application (CMRA):

5.2.1 The contractor shall report ALL contractor labor hours (including subcontractor labor hours) required for performance of services provided under this contract for the National Guard Bureau via a secure data collection site.

5.2.2 The contractor shall completely fill in all required data fields using the following web address: http://www.ecmra.mil/. Reporting inputs shall be for the labor executed during the period of performance during each Government fiscal year (FY), which runs October 1 through September 30. While inputs may be reported any time during the FY, all data shall be reported no later than October 31 of each calendar year, beginning with 2013. Contractors may direct questions to the help desk at http://www.ecmra.mil.

6.0 Applicable Publications: Publications applicable to this PWS are listed below:

Publication (Chapter/Page)

Date of Publication Mandatory or Advisory

Website

N/A N/A N/A N/A

TECHNICAL EXHIBIT 1

Performance Requirements Summary

This Performance Requirements Summary includes performance standards. The Government will use these standards to determine contractor performance and will compare contractor performance to the Acceptable Quality Level (AQL).

PWS Paragraph Task Performance Standard

Acceptable Quality Levels

(AQL)

Surveillance Method / By Whom

5.0 to 5.1.1 The contractor shall perform restorative maintenance within the scheduled maintenance visit.

The contractor shall perform restorative maintenance within the established timeframes 98% of the time each quarter.

2% failure to perform restorative maintenance within the established time frames each quarter.

Periodic Inspection

- COR will review quaterly work order logs.

TECHNICAL EXHIBIT 2

Deliverables Schedule

PWS Reference / Deliverable Title

Frequency Number of Copies

Medium/Format Submit To

1.4.4 Security

Requirements

Once after contract award

1 Electronic Submission

COR

1.4.8 Identification

Media

Return within 14 days of employee’s departure from contract performance.

Original(s) Hard Copy COR

4.1 General Within 60 days of

contract award

1 Electronic Submission

COR

4.2 Shop

Drawings

As produced with complete list within 30 days of contract end date

1 Electronic Submission

COR

WAGE DETERMINATION

WD 05-2383 (Rev.-18) was first posted on www.wdol.gov on 01/05/2016

REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2005-2383 Daniel W. Simms Division of | Revision No.: 18 Director Wage Determinations| Date Of Revision: 12/29/2015 Note: Under Executive Order (EO) 13658, an hourly minimum wage of $10.15 for calendar year 2016 applies to all contracts subject to the Service Contract Act for which the solicitation was issued on or after January 1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.15 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract in calendar year 2016. The EO minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

State: New York

Area: New York Counties of Broome, Cayuga, Chemung, Chenango, Cortland, Hamilton, Herkimer, Madison, Oneida, Onondaga, Oswego, Otsego, Tioga, Tompkins **Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations 01011 - Accounting Clerk I 12.91 01012 - Accounting Clerk II 14.49 01013 - Accounting Clerk III 17.66 01020 - Administrative Assistant 19.48 01040 - Court Reporter 18.96 01051 - Data Entry Operator I 11.55 01052 - Data Entry Operator II 12.77 01060 - Dispatcher, Motor Vehicle 15.33 01070 - Document Preparation Clerk 12.14 01090 - Duplicating Machine Operator 12.14 01111 - General Clerk I 11.53 01112 - General Clerk II 12.58 01113 - General Clerk III 14.12 01120 - Housing Referral Assistant 18.00 01141 - Messenger Courier 10.65 01191 - Order Clerk I 11.93 01192 - Order Clerk II 13.02 01261 - Personnel Assistant (Employment) I 13.96 01262 - Personnel Assistant (Employment) II 15.62 01263 - Personnel Assistant (Employment) III 17.25 01270 - Production Control Clerk 18.77 01280 - Receptionist 11.29 01290 - Rental Clerk 12.13 01300 - Scheduler, Maintenance 13.63 01311 - Secretary I 13.63

01312 - Secretary II 15.67 01313 - Secretary III 17.45 01320 - Service Order Dispatcher 12.29 01410 - Supply Technician 19.48 01420 - Survey Worker 14.47 01531 - Travel Clerk I 11.19 01532 - Travel Clerk II 12.07 01533 - Travel Clerk III 12.96 01611 - Word Processor I 12.29 01612 - Word Processor II 13.80 01613 - Word Processor III 15.43 05000 - Automotive Service Occupations 05005 - Automobile Body Repairer, Fiberglass 23.28 05010 - Automotive Electrician 18.24 05040 - Automotive Glass Installer 17.63 05070 - Automotive Worker 17.63 05110 - Mobile Equipment Servicer 16.32 05130 - Motor Equipment Metal Mechanic 18.96 05160 - Motor Equipment Metal Worker 17.63 05190 - Motor Vehicle Mechanic 17.25 05220 - Motor Vehicle Mechanic Helper 15.63 05250 - Motor Vehicle Upholstery Worker 16.95 05280 - Motor Vehicle Wrecker 17.63 05310 - Painter, Automotive 18.24 05340 - Radiator Repair Specialist 17.63 05370 - Tire Repairer 14.34 05400 - Transmission Repair Specialist 18.96 07000 - Food Preparation And Service Occupations 07010 - Baker 11.05 07041 - Cook I 10.78 07042 - Cook II 12.06 07070 - Dishwasher 8.91 07130 - Food Service Worker 9.34 07210 - Meat Cutter 16.17 07260 - Waiter/Waitress 9.99 09000 - Furniture Maintenance And Repair Occupations 09010 - Electrostatic Spray Painter 18.28 09040 - Furniture Handler 13.59 09080 - Furniture Refinisher 18.28 09090 - Furniture Refinisher Helper 15.63 09110 - Furniture Repairer, Minor 16.95 09130 - Upholsterer 20.09 11000 - General Services And Support Occupations 11030 - Cleaner, Vehicles 10.11 11060 - Elevator Operator 10.11 11090 - Gardener 14.37 11122 - Housekeeping Aide 11.12 11150 - Janitor 11.12 11210 - Laborer, Grounds Maintenance 12.34 11240 - Maid or Houseman 9.99 11260 - Pruner 17.78 11270 - Tractor Operator 14.53 11330 - Trail Maintenance Worker 12.34 11360 - Window Cleaner 12.77 12000 - Health Occupations

12010 - Ambulance Driver 15.13 12011 - Breath Alcohol Technician 14.88 12012 - Certified Occupational Therapist Assistant 17.45 12015 - Certified Physical Therapist Assistant 17.79 12020 - Dental Assistant 15.13 12025 - Dental Hygienist 26.52 12030 - EKG Technician 24.38 12035 - Electroneurodiagnostic Technologist 24.38 12040 - Emergency Medical Technician 15.13 12071 - Licensed Practical Nurse I 13.30 12072 - Licensed Practical Nurse II 14.88 12073 - Licensed Practical Nurse III 16.60 12100 - Medical Assistant 12.44 12130 - Medical Laboratory Technician 18.73 12160 - Medical Record Clerk 13.27 12190 - Medical Record Technician 14.85 12195 - Medical Transcriptionist 15.34 12210 - Nuclear Medicine Technologist 31.04 12221 - Nursing Assistant I 9.40 12222 - Nursing Assistant II 10.57 12223 - Nursing Assistant III 11.54 12224 - Nursing Assistant IV 12.95 12235 - Optical Dispenser 20.61 12236 - Optical Technician 14.38 12250 - Pharmacy Technician 13.77 12280 - Phlebotomist 12.95 12305 - Radiologic Technologist 25.19 12311 - Registered Nurse I 21.73 12312 - Registered Nurse II 26.58 12313 - Registered Nurse II, Specialist 26.58 12314 - Registered Nurse III 32.15 12315 - Registered Nurse III, Anesthetist 32.15 12316 - Registered Nurse IV 38.54 12317 - Scheduler (Drug and Alcohol Testing) 18.44 13000 - Information And Arts Occupations 13011 - Exhibits Specialist I 18.42 13012 - Exhibits Specialist II 22.83 13013 - Exhibits Specialist III 27.93 13041 - Illustrator I 18.42 13042 - Illustrator II 22.83 13043 - Illustrator III 27.93 13047 - Librarian 25.28 13050 - Library Aide/Clerk 10.80 13054 - Library Information Technology Systems 22.83 Administrator 13058 - Library Technician 12.68 13061 - Media Specialist I 16.47 13062 - Media Specialist II 18.42 13063 - Media Specialist III 20.55 13071 - Photographer I 15.46 13072 - Photographer II 17.29 13073 - Photographer III 21.43 13074 - Photographer IV 26.21 13075 - Photographer V 31.71 13110 - Video Teleconference Technician 17.17

14000 - Information Technology Occupations 14041 - Computer Operator I 14.77 14042 - Computer Operator II 16.52 14043 - Computer Operator III 18.43 14044 - Computer Operator IV 23.63 14045 - Computer Operator V (see 1) 14071 - Computer Programmer I 20.57 14072 - Computer Programmer II 24.53 14073 - Computer Programmer III (see 1) 14074 - Computer Programmer IV (see 1) 14101 - Computer Systems Analyst I (see 1) 14102 - Computer Systems Analyst II (see 1) 14103 - Computer Systems Analyst III (see 1) 14150 - Peripheral Equipment Operator 14.77 14160 - Personal Computer Support Technician 24.05 15000 - Instructional Occupations 15010 - Aircrew Training Devices Instructor (Non-Rated) 27.87 15020 - Aircrew Training Devices Instructor (Rated) 34.05 15030 - Air Crew Training Devices Instructor (Pilot) 40.44 15050 - Computer Based Training Specialist / Instructor 27.87 15060 - Educational Technologist 27.22 15070 - Flight Instructor (Pilot) 40.44 15080 - Graphic Artist 22.64 15090 - Technical Instructor 19.66 15095 - Technical Instructor/Course Developer 24.06 15110 - Test Proctor 15.87 15120 - Tutor 15.87 16000 - Laundry, Dry-Cleaning, Pressing And Related Occupations 16010 - Assembler 8.54 16030 - Counter Attendant 8.54 16040 - Dry Cleaner 9.91 16070 - Finisher, Flatwork, Machine 8.63 16090 - Presser, Hand 8.63 16110 - Presser, Machine, Drycleaning 8.63 16130 - Presser, Machine, Shirts 8.63 16160 - Presser, Machine, Wearing Apparel, Laundry 8.63 16190 - Sewing Machine Operator 10.50 16220 - Tailor 11.09 16250 - Washer, Machine 8.96 19000 - Machine Tool Operation And Repair Occupations 19010 - Machine-Tool Operator (Tool Room) 20.84 19040 - Tool And Die Maker 21.55 21000 - Materials Handling And Packing Occupations 21020 - Forklift Operator 14.75 21030 - Material Coordinator 18.77 21040 - Material Expediter 18.77 21050 - Material Handling Laborer 13.66 21071 - Order Filler 10.41 21080 - Production Line Worker (Food Processing) 14.75 21110 - Shipping Packer 13.30 21130 - Shipping/Receiving Clerk 13.30 21140 - Store Worker I 13.30 21150 - Stock Clerk 17.62 21210 - Tools And Parts Attendant 14.75 21410 - Warehouse Specialist 14.75

23000 - Mechanics And Maintenance And Repair Occupations 23010 - Aerospace Structural Welder 25.82 23021 - Aircraft Mechanic I 24.88 23022 - Aircraft Mechanic II 25.82 23023 - Aircraft Mechanic III 26.88 23040 - Aircraft Mechanic Helper 19.11 23050 - Aircraft, Painter 22.56 23060 - Aircraft Servicer 21.64 23080 - Aircraft Worker 22.46 23110 - Appliance Mechanic 18.24 23120 - Bicycle Repairer 14.34 23125 - Cable Splicer 29.40 23130 - Carpenter, Maintenance 19.98 23140 - Carpet Layer 19.67 23160 - Electrician, Maintenance 23.73 23181 - Electronics Technician Maintenance I 21.84 23182 - Electronics Technician Maintenance II 23.49 23183 - Electronics Technician Maintenance III 24.58 23260 - Fabric Worker 18.65 23290 - Fire Alarm System Mechanic 20.85 23310 - Fire Extinguisher Repairer 17.73 23311 - Fuel Distribution System Mechanic 28.12 23312 - Fuel Distribution System Operator 23.24 23370 - General Maintenance Worker 16.05 23380 - Ground Support Equipment Mechanic 24.88 23381 - Ground Support Equipment Servicer 20.62 23382 - Ground Support Equipment Worker 21.69 23391 - Gunsmith I 17.73 23392 - Gunsmith II 19.83 23393 - Gunsmith III 21.23 23410 - Heating, Ventilation And Air-Conditioning 19.43 Mechanic 23411 - Heating, Ventilation And Air Contditioning 20.16 Mechanic (Research Facility) 23430 - Heavy Equipment Mechanic 19.24 23440 - Heavy Equipment Operator 24.79 23460 - Instrument Mechanic 21.23 23465 - Laboratory/Shelter Mechanic 20.57 23470 - Laborer 11.58 23510 - Locksmith 20.37 23530 - Machinery Maintenance Mechanic 20.06 23550 - Machinist, Maintenance 17.18 23580 - Maintenance Trades Helper 15.63 23591 - Metrology Technician I 21.23 23592 - Metrology Technician II 22.08 23593 - Metrology Technician III 22.84 23640 - Millwright 20.70 23710 - Office Appliance Repairer 20.09 23760 - Painter, Maintenance 18.10 23790 - Pipefitter, Maintenance 27.88 23810 - Plumber, Maintenance 21.26 23820 - Pneudraulic Systems Mechanic 21.23 23850 - Rigger 21.23 23870 - Scale Mechanic 20.82 23890 - Sheet-Metal Worker, Maintenance 20.85

23910 - Small Engine Mechanic 19.26 23931 - Telecommunications Mechanic I 25.96 23932 - Telecommunications Mechanic II 26.86 23950 - Telephone Lineman 25.89 23960 - Welder, Combination, Maintenance 18.96 23965 - Well Driller 21.23 23970 - Woodcraft Worker 21.23 23980 - Woodworker 16.32 24000 - Personal Needs Occupations 24570 - Child Care Attendant 9.84 24580 - Child Care Center Clerk 12.27 24610 - Chore Aide 9.75 24620 - Family Readiness And Support Services 14.52 Coordinator 24630 - Homemaker 13.64 25000 - Plant And System Operations Occupations 25010 - Boiler Tender 24.39 25040 - Sewage Plant Operator 18.54 25070 - Stationary Engineer 24.39 25190 - Ventilation Equipment Tender 18.72 25210 - Water Treatment Plant Operator 18.28 27000 - Protective Service Occupations 27004 - Alarm Monitor 16.51 27007 - Baggage Inspector 13.35 27008 - Corrections Officer 21.94 27010 - Court Security Officer 21.74 27030 - Detection Dog Handler 16.29 27040 - Detention Officer 21.94 27070 - Firefighter 23.44 27101 - Guard I 13.35 27102 - Guard II 16.29 27131 - Police Officer I 22.40 27132 - Police Officer II 24.88 28000 - Recreation Occupations 28041 - Carnival Equipment Operator 11.05 28042 - Carnival Equipment Repairer 11.40 28043 - Carnival Equpment Worker 8.99 28210 - Gate Attendant/Gate Tender 13.80 28310 - Lifeguard 11.01 28350 - Park Attendant (Aide) 15.44 28510 - Recreation Aide/Health Facility Attendant 11.27 28515 - Recreation Specialist 19.13 28630 - Sports Official 12.29 28690 - Swimming Pool Operator 18.62 29000 - Stevedoring/Longshoremen Occupational Services 29010 - Blocker And Bracer 24.08 29020 - Hatch Tender 24.08 29030 - Line Handler 24.08 29041 - Stevedore I 21.05 29042 - Stevedore II 24.98 30000 - Technical Occupations 30010 - Air Traffic Control Specialist, Center (HFO) (see 2) 35.77 30011 - Air Traffic Control Specialist, Station (HFO) (see 2) 24.66 30012 - Air Traffic Control Specialist, Terminal (HFO) (see 2) 27.16 30021 - Archeological Technician I 15.31

30022 - Archeological Technician II 17.07 30023 - Archeological Technician III 21.22 30030 - Cartographic Technician 23.74 30040 - Civil Engineering Technician 21.56 30061 - Drafter/CAD Operator I 16.43 30062 - Drafter/CAD Operator II 19.13 30063 - Drafter/CAD Operator III 21.29 30064 - Drafter/CAD Operator IV 25.23 30081 - Engineering Technician I 14.27 30082 - Engineering Technician II 16.02 30083 - Engineering Technician III 18.70 30084 - Engineering Technician IV 22.20 30085 - Engineering Technician V 27.16 30086 - Engineering Technician VI 32.86 30090 - Environmental Technician 19.67 30210 - Laboratory Technician 18.00 30240 - Mathematical Technician 23.49 30361 - Paralegal/Legal Assistant I 17.28 30362 - Paralegal/Legal Assistant II 21.92 30363 - Paralegal/Legal Assistant III 26.81 30364 - Paralegal/Legal Assistant IV 32.44 30390 - Photo-Optics Technician 23.49 30461 - Technical Writer I 21.13 30462 - Technical Writer II 25.85 30463 - Technical Writer III 31.27 30491 - Unexploded Ordnance (UXO) Technician I 22.74 30492 - Unexploded Ordnance (UXO) Technician II 27.51 30493 - Unexploded Ordnance (UXO) Technician III 32.97 30494 - Unexploded (UXO) Safety Escort 22.74 30495 - Unexploded (UXO) Sweep Personnel 22.74 30620 - Weather Observer, Combined Upper Air Or (see 2) 21.29 Surface Programs 30621 - Weather Observer, Senior (see 2) 22.77 31000 - Transportation/Mobile Equipment Operation Occupations 31020 - Bus Aide 10.64 31030 - Bus Driver 14.20 31043 - Driver Courier 12.21 31260 - Parking and Lot Attendant 9.46 31290 - Shuttle Bus Driver 13.14 31310 - Taxi Driver 10.00 31361 - Truckdriver, Light 13.14 31362 - Truckdriver, Medium 17.61 31363 - Truckdriver, Heavy 17.68 31364 - Truckdriver, Tractor-Trailer 17.68 99000 - Miscellaneous Occupations 99030 - Cashier 9.10 99050 - Desk Clerk 10.17 99095 - Embalmer 26.64 99251 - Laboratory Animal Caretaker I 10.66 99252 - Laboratory Animal Caretaker II 11.47 99310 - Mortician 27.29 99410 - Pest Controller 15.84 99510 - Photofinishing Worker 11.97 99710 - Recycling Laborer 14.91 99711 - Recycling Specialist 17.56

99730 - Refuse Collector 13.58 99810 - Sales Clerk 11.34 99820 - School Crossing Guard 9.90 99830 - Survey Party Chief 20.03 99831 - Surveying Aide 12.59 99832 - Surveying Technician 17.23 99840 - Vending Machine Attendant 14.59 99841 - Vending Machine Repairer 16.15 99842 - Vending Machine Repairer Helper 14.59

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: $4.27 per hour or $170.80 per week or $740.13 per month

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor; 3 weeks after 8 years, 4 weeks after 15 years, and 5 weeks after 25 years.

Length of service includes the whole span of continuous service with the present contractor or successor, wherever employed, and with the predecessor contractors in the performance of similar work at the same Federal facility. (Reg. 29 CFR 4.173)

HOLIDAYS: A minimum of eleven paid holidays per year: New Year's Day, Martin Luther King Jr's Birthday, Washington's Birthday, Good Friday, Memorial Day, Independence Day, Labor Day, Columbus Day, Veterans' Day, Thanksgiving Day, and Christmas Day. A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.)

(See 29 CFR 4.174)

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE

FOLLOWING:

1) COMPUTER EMPLOYEES: Under the SCA at section 8(b), this wage determination does not apply to any employee who individually qualifies as a bona fide executive, administrative, or professional employee as defined in 29 C.F.R. Part 541. Because most Computer System Analysts and Computer Programmers who are compensated at a rate not less than $27.63 (or on a salary or fee basis at a rate not less than $455 per week) an hour would likely qualify as exempt computer professionals, (29 C.F.R. 541.

400) wage rates may not be listed on this wage determination for all occupations within those job families. In addition, because this wage determination may not list a wage rate for some or all occupations within those job families if the survey data indicates that the prevailing wage rate for the occupation equals or exceeds $27.63 per hour conformances may be necessary for certain nonexempt employees. For example, if an individual employee is nonexempt but nevertheless performs duties within the scope of one of the Computer Systems Analyst or Computer Programmer occupations for which this wage determination does not specify an SCA wage rate, then the wage rate for that employee must be conformed in accordance with the conformance procedures described in the conformance note included on this wage determination.

Additionally, because job titles vary widely and change quickly in the computer industry, job titles are not determinative of the application of the computer professional exemption. Therefore, the exemption applies only to computer employees who satisfy the compensation requirements and whose primary duty consists of:

(1) The application of systems analysis techniques and procedures, including consulting with users, to determine hardware, software or system functional specifications;

(2) The design, development, documentation, analysis, creation, testing or modification of computer systems or programs, including prototypes, based on and related to user or system design specifications;

(3) The design, documentation, testing, creation or modification of computer programs related to machine operating systems; or

(4) A combination of the aforementioned duties, the performance of which requires the same level of skills. (29 C.F.R. 541.400).

2) AIR TRAFFIC CONTROLLERS AND WEATHER OBSERVERS - NIGHT PAY & SUNDAY PAY: If you work at night as part of a regular tour of duty, you will earn a night differential and receive an additional 10% of basic pay for any hours worked between 6pm and 6am.

If you are a full-time employed (40 hours a week) and Sunday is part of your regularly scheduled workweek, you are paid at your rate of basic pay plus a Sunday premium of 25% of your basic rate for each hour of Sunday work which is not overtime (i.e. occasional work on Sunday outside the normal tour of duty is considered overtime work).

HAZARDOUS PAY DIFFERENTIAL: An 8 percent differential is applicable to employees employed in a position that represents a high degree of hazard when working with or in close proximity to ordinance, explosives, and incendiary materials. This includes work such as screening, blending, dying, mixing, and pressing of sensitive ordance, explosives, and pyrotechnic compositions such as lead azide, black powder and photoflash powder. All dry-house activities involving propellants or explosives.

Demilitarization, modification, renovation, demolition, and maintenance operations on sensitive ordnance, explosives and incendiary materials. All operations involving regrading and cleaning of artillery ranges.

A 4 percent differential is applicable to employees employed in a position that represents a low degree of hazard when working with, or in close proximity to ordance, (or employees possibly adjacent to) explosives and incendiary materials which involves potential injury such as laceration of hands, face, or arms of the employee engaged in the operation, irritation of the skin, minor burns and the like; minimal damage to immediate or adjacent work area or equipment being used.

All operations involving, unloading, storage, and hauling of ordance, explosive, and incendiary ordnance material other than small arms ammunition. These differentials are only applicable to work that has been specifically designated by the agency for ordance, explosives, and incendiary material differential pay.

** UNIFORM ALLOWANCE **

If employees are required to wear uniforms in the performance of this contract (either by the terms of the Government contract, by the employer, by the state or local law, etc.), the cost of furnishing such uniforms and maintaining (by laundering or dry cleaning) such uniforms is an expense that may not be borne by an employee where such cost reduces the hourly rate below that required by the wage determination. The Department of Labor will accept payment in accordance with the following standards as compliance:

The contractor or subcontractor is required to furnish all employees with an adequate number of uniforms without cost or to reimburse employees for the actual cost of the uniforms. In addition, where uniform cleaning and maintenance is made the responsibility of the employee, all contractors and subcontractors subject to this wage determination shall (in the absence of a bona fide collective bargaining agreement providing for a different amount, or the furnishing of contrary affirmative proof as to the actual cost), reimburse all employees for such cleaning and maintenance at a rate of $3.35 per…