PN_80774_Vol_3_Specs__FFE_and_Audio_Visual.pdf

RFP No. W912PM19R0018

SERE TRAINING COMPLEX

PN 80774

Camp MacKall, North Carolina

FF&E and Audio Visual

Specifications - Volume 3 of 3

FOUO

June 2019

RFP No. W912PM18F0045

SERE Training Complex

PN 80774

Camp Mackall, North Carolina

FF&E and Audio Visual - Volume 3 Corrected Final Submittal

6302 Fairview Road, Suite 600

Charlotte, North Carolina 28210 Phone (704) 358-8240

NC Eng. License No.: C-3190 NC Arch. License No.: 52842

March 2019

CAMP MACKALL, NC

Table of Contents Page 1

PROJECT TABLE OF CONTENTS

VOLUME 1 - SPECIFICATIONS

DIVISION 00 – PROCUREMENT AND CONTRACTING REQUIREMENTS

00 01 15 LIST OF DRAWINGS

00 10 00 CONTRACT LINE NUMBER SCHEDULE

00 70 00 CONDITIONS OF THE CONTRACT

00 73 00 SUPPLEMENTARY CONDITIONS

DIVISION 01 - GENERAL REQUIREMENTS

01 10 00 SUMMARY OF WORK

01 10 00.10 38 SUPPLEMENTARY SPECIAL CONTRACT REQUIREMENTS

01 11 00 STATEMENT OF WORK

01 11 01 SITE CIVIL UTILITIES AND LANDSCAPE

01 11 02 LIMITED USE INSTRUCTION BUILDING

01 11 03 INDIVIDUAL TRAINING BUILDING

01 11 04 CAMP AID STATION

01 11 05 AV-INTERVIEW

01 11 06 MULTI-PURPOSE BUILDING

01 11 07 PODIUM

01 11 08 INSTRUCTOR CONTROL BUILDING

01 11 09 TOWERS

01 11 10 LARGE GROUP INSTRUCTION BUILDING

01 11 11 LATRINE

01 11 12 KITCHEN

01 11 13 CONTROL POINT

01 11 14 COVERED AREA

01 14 00 WORK RESTRICTIONS

01 20 00.00 20 PRICE AND PAYMENT PROCEDURES

01 30 00 ADMINISTRATIVE REQUIREMENTS

01 32 01.00 37 PROJECT SCHEDULE

01 33 00.00 37 SUBMITTAL PROCEDURES

01 33 16.00 10 DESIGN DATA (DESIGN AFTER AWARD)

33 29.00 37 SUSTANABILITY

01 35 26 GOVERNMENTAL SAFETY REQUIREMENTS

01 42 00 SOURCES FOR REFERENCE PUBLICATIONS

01 45 00.00 10 QUALITY CONTROL

01 45 00.15 10 RESIDENT MANAGEMENT SYSTEM CONTRACTOR MODE (RMS

01 45 35 SPECIAL INSPECTIONS

01 50 00 TEMPORARY CONSTRUCTION FACILITIES AND CONTROLS

01 57 19 TEMPORARY ENVIRONMENTAL CONTROLS

01 57 19.00 37 INDOOR AIR QUALITY (IAQ) MANAGEMENT

01 58 00 PROJECT IDENTIFICATION

01 74 19.00 37 CONSTRUCTION AND DEMOLITION WASTE MANAGEMENT

01 78 00.00 37 CLOSEOUT SUBMITTALS

01 78 23 OPERATION AND MAINTENANCE DATA

01 78 24.00 10 FACILITY DATA REQUIREMENTS

01 91 00.00 37 COMMISSIONING

CAMP MACKALL, NC

Table of Contents Page 2

VOLUME 2 – APPENDICES

APPENDIX A GEOTECHNICAL REPORT

APPENDIX B DD FORM 1391

APPENDIX C ENVIRONMENTAL PROTECTION PLANS

APPENDIX D HYDRANT FLOW TEST

APPENDIX E FORT BRAGG WEATHER DATA

APPENDIX F FORT BRAGG TREE MITIGATION

APPENDIX G FORT BRAGG SEEDING SPECIFICATION

APPENDIX H UTILITY RATES AND CHARGES

APPENDIX I FORT BRAGG ACCESS FORMS

APPENDIX J RECYCLING

APPENDIX K PERMIT LISTS AND FORMS

APPENDIX L GIS NON-DISCLOSURE AND REQUEST

APPENDIX M TOTAL DESIGN ANALYSIS

APPENDIX N FINDING OF NO SIGNIFICANT IMPACT

APPENDIX O PROGRAMMATIC ENVIRONMENTAL ASSESSMENT

APPENDIX P ROOM INFORMATION SHEETS

APPENDIX Q USACOC VTC PRODUCT DESIGN GUIDE

APPENDIX R NATIONAL SECURITY TELECOM

APPENDIX S SECRET INTERNET PROTOCOL ROUTER (SIPR)

APPENDIX T USASOC IT TECHNICAL DESIGN GUIDE

APPENDIX U FORT BRAGG COMMS IDC

APPENDIX V TYPICAL ICIDS INSTALLATION

APPENDIX W USASOC TELECOM ROOM LAYOUT

APPENDIX X FORT HAUCHUCA 13A

APPENDIX Y CYBER SECURITY

APPENDIX Z ENVIRONMENTAL COMPLIANCE CHECKLIST

Volume 3 - FF&E and AV

Furniture, Fixtures, and Equipment (FF&E) Audio-Visual Package (AV)

-- End of Project Table of Contents –

Camp Mackall, NC

FURNITURE, FIXTURES, AND EQUIPMENT (FF&E)

Camp Mackall, NC

THIS PAGE IS INTENTIONALLY LEFT BLANK

FF&E PACKAGE

Wilmington District

SOF SERE RESISTANCE TRAINING LABORATORY

CAMP MACKALL, NC

CONTRACT NO: W912HN-18-D-2001

TASK ORDER: W912PM-18-F-0045

PROJECT NO: 80774

CORRECTED FINAL DESIGN SUBMITTAL

April 22, 2019

SERE RESISTANCE TRAINING LABORATORY

100% DESIGN SUBMITTAL 03.08.2019

TABLE OF CONTENTS

Section 1 ............................................................ Narrative

Section 2 ....................................... Keyed Furniture Plans

Section 3 ......................... Furniture Specification Sheets

Section 4 .......................................................... Equipment

Section 5 ................................................ Item Code Index

100% DESIGN SUBMITTAL 03.08.2019

SECTION 1

NARRATIVE

100% DESIGN SUBMITTAL 03.08.2019

Project Overview

The intent of this project is to design and construct a quality SOF SERE Resistance Training Laboratory at Camp Mackall consisting of multiple buildings. The buildings with FF&E requirements include AV/Interview Building, Multi-Purpose Building, Instructor Control Building, Guard Tower, Limited Use Instruction, Individual Training Building, and Camp Aid Station. Key areas within these buildings will be designed to have an authentic 2nd-world appearance and the FF&E is required to align with this appearance.

The items identified in this document have been programmed and coordinated with the user. Furniture, fixtures & equipment shall comply as noted to support the proper needs of this training facility.

Furniture, Fixtures & Equipment Procurement & Installation

The FF&E package shall be provided by the contractor. The contractor shall provide FF&E items in accordance with this document and shall supply the government with Specifications, Keyed Plans and itemized cost for review.

The items in this document include but are not limited to task seating, conference seating, side seating, stools, interview tables, pull-up chairs, work and conference tables, work bench, storage cabinets, shelves and cubbies, cots, rolling industrial tables, laundry equipment, kitchen ancillary equipment, lockers/wardrobes/benches, desking, bookcase, exam chair, medical cabinet, AED, therapy tub and privacy curtain. The contractor will be responsible for accommodating and coordinating with GFGI items.

Furniture Requirements

FF&E items are identified and tagged on the furniture plans. Each item is tagged with a unique identification letter/number. The furniture specification sheets provide a description of each product along with the location and quantity.

100% DESIGN SUBMITTAL 03.08.2019

SECTION 2

KEYED FURNITURE PLANS

AV/Interrogation Building

Multi-Purpose Building

NOTE: THIS PLAN REPRESENTS THE

BASE BID. THERE IS A BID OPTION

#3 FOR THIS BUILDING BUT IT

DOES NOT AFFECT FURNITURE OR

EQUIPMENT SHOWN HERE.

Instructor Control Building

Guard Tower

NOTE: THIS PLAN REPRESENTS THE BASE

BID. THERE ARE TWO BID OPTIONS #5 AND

#6 FOR TOWER TYPE 2, BUT THEY DO NOT

CONTAIN FURNITURE OR EQUIPMENT.

Individual Training Building

NOTE: THIS PLAN REPRESENTS THE BASE BID. THERE IS A

BID OPTION #4 FOR THIS BUILDING BUT IT DOES NOT

AFFECT FURNITURE OR EQUIPMENT SHOWN HERE.

Limited Use Instruction – First Floor

Limited Use Instruction – Second Floor

Camp Aid Station

SECTION 3

FURNITURE SPECIFICATION SHEETS

Project Date CodeItem Name

Manufacturer | Specification Illustration

Location Quantity

Warranty/Testing

Total Quantity

FURNITURE FIXTURE + EQUIPMENT SPECIFICATION IA Interior Architects

Camp Mackall SERE Training - 100% Submittal 03.08.19

Fabric/Finish

B1Locker Room Bench

3Gray Limited Use: 209 - Men’s Latrine Room

MFG: Bradley Corp.

Style: Lenox Locker Pedestal Bench Model Number: LENOXPEDESTAL

Width: 72” Depth: 9” Height: 18.5”

Warranty Requirements:

1. 10 year – Frame and glides or casters.

2. 5 year –Thermoplastic.

3. 3 year – Fabric and finishes.

Testing and Standards:

ANSI/BIFMA X5.1 General Purpose

Description

FURNITURE FIXTURE + EQUIPMENT SPECIFICATION IA Interior Architects

Camp Mackall SERE Training - 100% Submittal 03.08.19

General Requirements:

1. Frame shall be tubular steel or die-cast aluminum or ½” diameter wire rod.

2. Joints shall be welded

3. Seat shall be composed of HDPE plastic

4. Shall be impervious to moisture

Material: Chair padding materials and fabric shall comply with the State of California Technical Information Bulletin 117.

B1Locker Room Bench

Location Quantity

Warranty/Testing

Total Quantity

FURNITURE FIXTURE + EQUIPMENT SPECIFICATION IA Interior Architects

Camp Mackall SERE Training - 100% Submittal 03.08.19

Fabric/Finish

B2Locker Room Bench

1Limited Use: 210 - Women’s Latrine Room

Grey

Warranty Requirements:

1. 10 year – Frame and glides or casters.

2. 5 year –Thermoplastic.

3. 3 year – Fabric and finishes.

Testing and Standards:

ANSI/BIFMA X5.1 General Purpose

MFG: Bradley Corp.

Style: Lenox Locker Pedestal Bench Model Number: LENOXPEDESTAL

Width: 48” Depth: 9” Height: 18.5”

FURNITURE FIXTURE + EQUIPMENT SPECIFICATION IA Interior Architects

Camp Mackall SERE Training - 100% Submittal 03.08.19 B2Locker Room Bench

General Requirements:

1. Frame shall be tubular steel or die-cast aluminum or ½” diameter wire rod.

2. Joints shall be welded

3. Seat shall be composed of HDPE plastic

4. Shall be impervious to moisture

Material: Chair padding materials and fabric shall comply with the State of California Technical Information Bulletin

Location Quantity

Warranty/Testing

Total Quantity

FURNITURE FIXTURE + EQUIPMENT SPECIFICATION IA Interior Architects

Camp Mackall SERE Training - 100% Submittal 03.08.19

Fabric/Finish

B3Metal Handcuff Bench

MFG: Norix Style: Cuff Bench Model Number: IBF-72

Width: 72” Depth: 18” Height: 18” Weight Limit: 750 lbs.

Steel Limited Use: 102 - Holding Area

Warranty Requirements:

3. Warranty shall cover users up to 300 pounds

1. ANSI/BIFMA X5.1 General Purpose

FURNITURE FIXTURE + EQUIPMENT SPECIFICATION IA Interior Architects

Camp Mackall SERE Training - 100% Submittal 03.08.19

General Requirements:

1. Frame shall be cut, formed, and welded steel

2. Joints shall be welded.

3. Bench shall have floor mounting at all legs, anchord to floor

4. Frame shall be 12 gauge steel

5. Bench shall have powder-coated cuff rings welded to frame

6. Bench shall have a min. 750 lb static load capacity

Material: Chair padding materials and fabric shall comply with the State of California Technical Information Bulletin

B3Metal Handcuff Bench

Location Quantity

Warranty/Testing

Total Quantity

FURNITURE FIXTURE + EQUIPMENT SPECIFICATION IA Interior Architects

Camp Mackall SERE Training - 100% Submittal 03.08.19

Fabric/Finish

B4All-Weather Bench

1 year limited replacement warranty

ANSI/BIFMA office furniture safety and perfor-mance standards

Audio-Visual: Telecomm / AV Server Room (outside of)

MFG: Safco Products Style: CoGo Steel Oudoor/Indoor Bench Model Number: 4369BL

Width: 60” Depth: 25” Height: 30”

FURNITURE FIXTURE + EQUIPMENT SPECIFICATION IA Interior Architects

Camp Mackall SERE Training - 100% Submittal 03.08.19

General Requirements:

1. Frame shall be tubular steel or die-cast aluminum or ½” diameter wire rod.

2. Joints shall be welded.

3. UV and weather resistant

B4All-Weather Bench

Location Quantity

Warranty/Testing

Total Quantity

FURNITURE FIXTURE + EQUIPMENT SPECIFICATION IA Interior Architects

Camp Mackall SERE Training - 100% Submittal 03.08.19

Fabric/Finish

BB1Bulletin Board

MFG: Quartet Style: Natural Cork Bulletin Board, Aluminum Frame Model: ECKA304

Width: 4’ Height: 3’

Audio-Visual: 115 - Latrine Limited Use:128 - Corridor 3

FURNITURE FIXTURE + EQUIPMENT SPECIFICATION IA Interior Architects

Camp Mackall SERE Training - 100% Submittal 03.08.19

General Requirements:

1. Wall mounted

2. Aluminum frame

BB1Bulletin Board

Location Quantity

Warranty/Testing

Total Quantity

FURNITURE FIXTURE + EQUIPMENT SPECIFICATION IA Interior Architects

Camp Mackall SERE Training - 100% Submittal 03.08.19

Fabric/Finish

CC1Cubicle Curtain

3Camp Aid: 101 - Primary Exam/Treatment

MFG: Winco Style: Privess Modular Privacy Screen Model Number: 3749

Warranty: One year warranty

Sure-Check vinyl in Light Blue

FURNITURE FIXTURE + EQUIPMENT SPECIFICATION IA Interior Architects

Camp Mackall SERE Training - 100% Submittal 03.08.19

General Requirements:

1. 4 fabric panel modular hinged privacy screen

2. Antimicrobial fabric, flame, stain, fluid, and odor resistant; anti-static; hypoallergenic; tear resistant; free of heavy metals such as lead, chromium, molybdenum, cadmium, etc.

CC1Cubicle Curtain

Location Quantity

Warranty/Testing

Total Quantity

FURNITURE FIXTURE + EQUIPMENT SPECIFICATION IA Interior Architects

Camp Mackall SERE Training - 100% Submittal 03.08.19

Fabric/Finish

CT1Cot

Audio-Visual:101 - AV Technicians Workshop Camp Aid: 103 - Ready Room

MFG: WEHSCO

Style: Rollaway Bed , 48 In.

Model Number: 475

Width: 48” Length: 72-1/2” Height: 21-1/2” Weight Capacity: 275 lbs.

Heavy-duty vinyl mattress cover

FURNITURE FIXTURE + EQUIPMENT SPECIFICATION IA Interior Architects

Camp Mackall SERE Training - 100% Submittal 03.08.19

General Requirements:

1. Folding Roll-a-way Bed

2. Min. weight capacity 275 lbs.

3. 6 in. foam waterproof mattress included

4. 4 in. Ball-bearing tires

5. Heavy-duty, hospital-grade vinyl mattress cover that is antibacterial, anti-fungal, water proof, and flame retardant

CT1Cot

Location Quantity

Warranty/Testing

Total Quantity

FURNITURE FIXTURE + EQUIPMENT SPECIFICATION IA Interior Architects

Camp Mackall SERE Training - 100% Submittal 03.08.19

Fabric/Finish

C1Rolling Desk Chair (AV)

MFG: Steelcase Style: Gesture 442 Series Work Chairs Model: 442A50

Width: 22-3/8” - 34-5/8” Depth: 21” - 23-5/8” (Adjustable seat depth) Overall Height: 39-1/4” - 44-1/4” Seat Height: 16” - 21”

Audio-Visual: 117 - AV Control Room Limited Use: 125 - Brief Room Limited Use: 126 - NCOIC Room Limited Use: 127 - Senior Civillian Room Limited Use: 131 - Security Office Limited Use: 201 - Team Room 3 Limited Use: 202 - Team Room 2 Limited Use: 203 - Team Room 1 Limited Use: 207 - Training Cell Room Camp Aid: 102- Medical/Psychologist Office

Mesh seat and back: Black Chair trim and frame: Black Casters: Black

10 YR - mechanisms, pneumatic cylinders, caster, arms, and seat pan adjustment.

5 YR - foam and fabric.

Warranty shall cover 24/7 application and users up to 300 pounds. Multi-shift appliacations shall not cause warranty to be pro-rated. Warranty for conference seating to cover up to 300 pounds.

Testing Standards: ANSI/BIFMA X5.1-3022-General

FURNITURE FIXTURE + EQUIPMENT SPECIFICATION IA Interior Architects

Camp Mackall SERE Training - 100% Submittal 03.08.19

General Requirements:

1. A pneumatic cylinder shall be used to accomplish the seat height adjustment.

2. Chairs shall have a forward seat edge flex, or shall tilt at least 1”, and/or have a waterfall edge.

3. Chairs adjustment: a. Synchronized tilt with a minimum 2:1 back-to-seat recline ratio with a user adjustment for tilt and a means of adjusting the backrest tension. The tension adjustment shall be achieved by a user- adjustable control.

OR b. The user adjustment for tilt shall be achieved by a weight sensing mechanism.

4. Chairs shall have a tilt lock or stop position mechanism that the user can adjust while seated.

5. The recline angle (angle between the seat and back) shall have an adjustment of 15 degrees or more, and should fall within the range of 90 to approximately 120 degrees from the horizontal position.

6. Chairs shall have a 360 degree swivel.

7. Mesh back fabrics shall have elasticity elongation properties that will not allow the mesh to sag, sink, cradle, or hammock.

8. There shall be no hard edges on the frame’s structure which comes in contact with the user and shall not cause discomfort when changing posture.

9. Chairs shall have a 5-star base with a minimum dimension of 25” in diameter.

Material: Chair padding materials and fabric shall comply with the State of California Technical Information Bulletin 117.

Adjustable Arm Requirements:

1. Arm adjustments shall be made without the use of any tools.

2. Chairs shall have a height and width 4-way adjustable arm.

3. The arm depth adjustment shall be independent of the seat depth adjustment.

4. User shall be able to make all arm adjustments while seated.

C1Rolling Desk Chair (AV)

Location Quantity

Warranty/Testing

Total Quantity

FURNITURE FIXTURE + EQUIPMENT SPECIFICATION IA Interior Architects

Camp Mackall SERE Training - 100% Submittal 03.08.19

Fabric/Finish

C2

Side Chair

MFG: Steelcase Style: Player 475 Series Model: 475415M

Width: 25-1/2” Depth: 21-1/4” Height: 30-1/4” Seat Height: 18-1/4”

Upholstered seat and back - Grade C.

Frame: black

Limited Use: 112 - Interview Room Limited Use: 113 - Interview Room Limited Use: 114 - Interview Room Limited Use: 115 - Interview Room Limited Use: 116 - Interview Room Limited Use: 117 - Interview Room Limited Use: 118 - Processing Room Limited Use: 126 - NCOIC Office Limited Use: 127 - Senior Civilian Office Limited Use: 212 - Shift Brief Room Camp Aid: 102 - Medical/Psychologist Office Audio-Visual: 102 - Interview Room Audio-Visual: 103 - Interview Room Audio-Visual: 104 - Interview Room Audio-Visual: 105 - Interview Room Audio-Visual: 106 - Interview Room Audio-Visual: 107 - Interview Room Audio-Visual: 108 - Interview Room Audio-Visual: 109 - Interview Room Audio-Visual: 110 - Interview Room Audio-Visual: 111 - Interview Room Audio-Visual: 112 - Interview Room

10 YR - Frame and glides or casters 5 YR - Thermoplastic 3 YR - Fabric and finishes Testing/Standards:

ANSI/BIFMA X5.1 - 2002 - General Purpose

FURNITURE FIXTURE + EQUIPMENT SPECIFICATION IA Interior Architects

Camp Mackall SERE Training - 100% Submittal 03.08.19

General Requirements:

1. Frame shall be tubular steel or die-cast aluminum or ½” diameter wire rod.

2. Joints shall be welded.

3. Non-marring floor glides

4. Chair shall have a reinforced back, legs, and arms.

5. The seat shall have a waterfall edge.

6. The back attachment to the frame shall be concealed.

7. Back flex mechanisms shall gradually increase resistance with applied pressure.

8. Fully upholstered seat and back Material:

1. Chair padding materials and fabric shall comply with the State of California Technical Information Bulletin 117.

C2Side Chair

Location Quantity

Warranty/Testing

Total Quantity

FURNITURE FIXTURE + EQUIPMENT SPECIFICATION IA Interior Architects

Camp Mackall SERE Training - 100% Submittal 03.08.19

Fabric/Finish

C3Metal Chair

MFG: Furniture Lab Style: Deco Series - Chair Model Number: 712

Width: 16” Depth: 19.5” Height (Overall): 34.5”

Silvertone 2

Limited Use: 112 - Interview Room Limited Use: 113 - Interview Room Limited Use: 114 - Interview Room Limited Use: 115 - Interview Room Limited Use: 116 - Interview Room Limited Use: 117 - Interview Room Limited Use: 118 - Processing Room Audio-Visual: 102 - Interview Room Audio-Visual: 103 - Interview Room Audio-Visual: 104 - Interview Room Audio-Visual: 105 - Interview Room Audio-Visual: 106 - Interview Room Audio-Visual: 107 - Interview Room Audio-Visual: 108 - Interview Room Audio-Visual: 109 - Interview Room Audio-Visual: 110 - Interview Room Audio-Visual: 111 - Interview Room Audio-Visual: 112 - Interview Room

Warranty Requirements:

1. 10 year – Frame and glides or casters.

2. 5 year –Thermoplastic.

3. 3 year – Fabric and finishes.

ANSI/BIFMA X5.1-2002 General Purpose

FURNITURE FIXTURE + EQUIPMENT SPECIFICATION IA Interior Architects

Camp Mackall SERE Training - 100% Submittal 03.08.19

General Requirements:

1. Frame shall be tubular steel or die-cast aluminum or ½” diameter wire rod.

2. Joints shall be welded.

3. Non-marring floor glides or casters.

4. Chair shall have a reinforced back, legs, and arms.

C3Metal Chair

Location Quantity

Warranty/Testing

Total Quantity

FURNITURE FIXTURE + EQUIPMENT SPECIFICATION IA Interior Architects

Camp Mackall SERE Training - 100% Submittal 03.08.19

Fabric/Finish

C5Bar Stool

MFG: Furniture Lab Style: Deco Series - Counter height stool Model Number: 969

Width: 16” Depth: 20” Height: 42” Seat (Counter height)

Audio-Visual: 102 - Interview Room Audio-Visual: 103 - Interview Room Audio-Visual: 104 - Interview Room Audio-Visual: 105 - Interview Room Audio-Visual: 106 - Interview Room Audio-Visual: 107 - Interview Room Audio-Visual: 108 - Interview Room Audio-Visual: 109 - Interview Room Audio-Visual: 110 - Interview Room Audio-Visual: 111 - Interview Room Audio-Visual: 112 - Interview Room Limited Use: 119 - Corridor 2 Guard Tower: 101 - Tower

Silvertone

Warranty Requirements:

1. 10 year – Frame and glides or casters.

2. 5 year –Thermoplastic.

3. 3 year – Fabric and finishes.

FURNITURE FIXTURE + EQUIPMENT SPECIFICATION IA Interior Architects

Camp Mackall SERE Training - 100% Submittal 03.08.19

General Requirements:

1. Frame shall be tubular steel or die-cast aluminum or ½” diameter wire rod.

2. Joints shall be welded.

3. Non-marring floor glides or casters.

4. Chair shall have a reinforced back, legs, and arms.

5. Seat shall be upholstered

Material: Chair padding materials and fabric shall comply with the State of California Technical Information Bulletin

C5Bar Stool

Location Quantity

Warranty/Testing

Total Quantity

FURNITURE FIXTURE + EQUIPMENT SPECIFICATION IA Interior Architects

Camp Mackall SERE Training - 100% Submittal 03.08.19

Fabric/Finish

C6Desk Chair (2nd World)

MFG: Furniture Lab Style: Deco Series - Chair Model Number: 654

Width: 16” Depth: 19.5” Height (Overall):34.5”

Frame: Silvertone Upholstery: Grade D

Individual Training: 101 - Guard Room Instructor Control: 101 - Instructor Room

Warranty Requirements:

1. 10 year – Frame and glides or casters.

2. 5 year –Thermoplastic.

3. 3 year – Fabric and finishes.

FURNITURE FIXTURE + EQUIPMENT SPECIFICATION IA Interior Architects

Camp Mackall SERE Training - 100% Submittal 03.08.19

General Requirements:

1. Frame shall be tubular steel or die-cast aluminum or ½” diameter wire rod.

2. Joints shall be welded.

3. Non-marring floor glides or casters.

4. Chair shall have a reinforced back, legs, and arms.

5. Seat shall be upholstered

Material: Chair padding materials and fabric shall comply with the State of California Technical Information Bulletin

C6Desk Chair (2nd World)

Location Quantity

Warranty/Testing

Total Quantity

FURNITURE FIXTURE + EQUIPMENT SPECIFICATION IA Interior Architects

Camp Mackall SERE Training - 100% Submittal 03.08.19

Fabric/Finish

C8Sofa bed

MFG: Carolina Style: Retrospect Model Number: 7058-S76

Width: 76” Depth: 34” Height: 33”

Provide mid-grade fabric allowance Limited Use: 126 - NCOIC Limited Use: 127 - Senior Civilian Room Camp Aid: 102 - Medical/Psychologist Office

Warranty Requirements:

1. 10 year – Structure.

2. 5 year – Foam and fabric.

3. 5 year – Wood veneer and functional mechanisms.

Testing and Standards:

ANSI/BIFMA X5.4 Lounge Seating OR GSA 3FNE-CO 00-594A/596A Lounge Seating Traditional and Transitional

FURNITURE FIXTURE + EQUIPMENT SPECIFICATION IA Interior Architects

Camp Mackall SERE Training - 100% Submittal 03.08.19

General Requirements:

1. Seat and back shall be upholstered

2. Shall have a loose folding back cushion

3. Shall have a tight seat cushion

4. Sleep surface shall be antimicrobial

5. Non-marring adjustable glides Material

1. Chair padding materials and fabric shall comply with the State of California Technical Information Bulletin 117.

C8Sofa bed

Location Quantity

Warranty/Testing

Total Quantity

FURNITURE FIXTURE + EQUIPMENT SPECIFICATION IA Interior Architects

Camp Mackall SERE Training - 100% Submittal 03.08.19

Fabric/Finish

C9Medical Station Stool

MFG: Safco Style: Lab Stool, Low Base with Screw Lift Model Number: 3432BL

Width: 23” Depth: 23” Height: 17” - 25” Weight limit: 325 lbs.

Black vinyl seat Camp Aid: 101 -Primary Exam/Treatment

Warranty Requirements:

1. 10 year – Mechanisms, pneumatic cylinders, casters, arms, and seat pan adjustment.

2. 5 year – Foam and fabric.

3. Warranty shall cover users up to 300 pounds

1. ANSI/BIFMA X5.1 General Purpose Office Chairs

FURNITURE FIXTURE + EQUIPMENT SPECIFICATION IA Interior Architects

Camp Mackall SERE Training - 100% Submittal 03.08.19

General Requirements:

1. There shall be no hard edges on the frame’s structure which comes in contact with the user and/or causes discomfort when changing posture.

2. Chairs shall have a 5-star base with a minimum dimension of 25” in diameter.

3.Caster base

4. Joints shall be welded

5. 360 degree swivel

6. Shall have screw lift base

7. Shall have a min. 5-inch height range adjustment

8. Cushioned seat Material: Chair padding materials and fabric shall comply with the State of California Technical Information Bulletin

C9Medical Station Stool

Location Quantity

Warranty/Testing

Total Quantity

FURNITURE FIXTURE + EQUIPMENT SPECIFICATION IA Interior Architects

Camp Mackall SERE Training - 100% Submittal 03.08.19

Fabric/Finish

C10Lounge Chair

MFG: Haworth Style: Poppy Lounge - Basket Model Number: SLP-22-T

Width: 31” Depth: 29.4” Height: 32.6”

Seat: Upholstery, mid-grade allowance Back: Upholstery, mid-grade allowance Trim: TR-F Black

Limited Use Instruction Building 129 - Waiting Room

Warranty Requirements:

1. 10 year – Structure.

2. 5 year – Foam and fabric.

3. 5 year – Wood veneer and functional mechanisms.

Testing and Standards:

ANSI/BIFMA X5.4 Lounge Seating OR

FURNITURE FIXTURE + EQUIPMENT SPECIFICATION IA Interior Architects

Camp Mackall SERE Training - 100% Submittal 03.08.19

General Requirements:

1. Chair shall have upholstered back and arms

2. Shall have a four leg steel basket frame

Material: Chair padding materials and fabric shall comply with the State of California Technical Information Bulletin

C10Lounge Chair

Location Quantity

Warranty/Testing

Total Quantity

FURNITURE FIXTURE + EQUIPMENT SPECIFICATION IA Interior Architects

Camp Mackall SERE Training - 100% Submittal 03.08.19

Fabric/Finish

C11Couch

MFG: Darran Style: Filmore Model Number: FIL0100DAS03

Width: 71” Depth: 31-1/2” Height: 31”

Seat: Upholstery, Haworth Collection - mid-grade allowance Back: Upholstery, Haworth Collection - mid-grade allowance

Limited Use: 129 - Waiting Room

Warranty Requirements:

1. 10 year – Structure.

2. 5 year – Foam and fabric.

3. 5 year – Wood veneer and functional mechanisms.

Testing and Standards:

ANSI/BIFMA X5.4 Lounge Seating OR

FURNITURE FIXTURE + EQUIPMENT SPECIFICATION IA Interior Architects

Camp Mackall SERE Training - 100% Submittal 03.08.19

General Requirements:

1. Shall be a three seat sofa

2. Frame shall be constructed of hardwood

3. Joints shall be securely fastened with mortise

4. Leg shall be anodized aluminum

Material: Chair padding materials and fabric shall comply with the State of California Technical Information Bulletin

C11Couch

Location Quantity

Warranty/Testing

Total Quantity

FURNITURE FIXTURE + EQUIPMENT SPECIFICATION IA Interior Architects

Camp Mackall SERE Training - 100% Submittal 03.08.19

Fabric/Finish

C12Exam Chair

MFG: Midmark Style: Ritter Model Number: 204

Width: 30.5” Depth: 56” Height: 32.13”

Upholstery: Ioron Ore-851 Camp Aid: 101 - Primary Exam/Treatment

FURNITURE FIXTURE + EQUIPMENT SPECIFICATION IA Interior Architects

Camp Mackall SERE Training - 100% Submittal 03.08.19

General Requirements:

1. Non-powered exam table/chair

2. Min. 500 lb weight capacity

3. Soft touch vinyl upholstery top with antimicrobial properties

C12Exam Chair

Location Quantity

Warranty/Testing

Total Quantity

FURNITURE FIXTURE + EQUIPMENT SPECIFICATION IA Interior Architects

Camp Mackall SERE Training - 100% Submittal 03.08.19

Fabric/Finish

C13Stacking Chair

MFG: Allseating Style: Tuck 4-leg Model Number: 11054-WA-CM-AHZ-BHZ-SHZ-NG-FA-

AS

Width: 24.5” Depth: 23” Height: 32.25”

Warranty Requirements:

1. 10 year – Frame and glides or casters.

2. 5 year –Thermoplastic.

3. 3 year – Fabric and finishes

Testing and Standards:

ANSI/BIFMA X5.1 General Purpose

Camp Aid: 103 - Ready Room

Poly seat & back - base grade color to be selected by User

FURNITURE FIXTURE + EQUIPMENT SPECIFICATION IA Interior Architects

Camp Mackall SERE Training - 100% Submittal 03.08.19

General Requirements:

1. Frame shall be tubular steel or die-cast aluminum or ½” diameter wire rod.

2. Joints shall be welded.

3. Non-marring floor glides

4. Chair shall have a reinforced back, legs, and arms.

5. The seat shall have a waterfall edge.

6. Back flex mechanisms shall gradually increase resistance with applied pressure.

Material: Chair padding materials and fabric shall comply with the State of California Technical Information Bulletin

C13Stacking Chair

Location Quantity

Warranty/Testing

Total Quantity

FURNITURE FIXTURE + EQUIPMENT SPECIFICATION IA Interior Architects

Camp Mackall SERE Training - 100% Submittal 03.08.19

Fabric/Finish

C14Chair with Casters

MFG: Global Industries Inc.

MFG Number: GLB3212-3NBK-IM11

Width: 26” Depth: 22-1/2” Height: 40”

Limited Use: 125 - Brief Room Limited Use: 134 - Ready Room Limited Use: 201 - Team Room 3 Limited Use: 202 - Team Room 2 Limited Use: 203 - Team Room 1 Limited Use: 207 - Training Cell Room

Mid-grade fabric seat and back Black base

10 YR - mechanisms, pneumatic cylinders, caster, arms, and seat pan adjustment.

5 YR - foam and fabric.

Warranty shall cover 24/7 application and users up to 300 pounds. Multi-shift appliacations shall not cause warranty to be pro-rated. Warranty for conference seating to cover up to 300 pounds.

Testing Standards: ANSI/BIFMA X5.1-3022-General

FURNITURE FIXTURE + EQUIPMENT SPECIFICATION IA Interior Architects

Camp Mackall SERE Training - 100% Submittal 03.08.19

General Requirements:

1. A pneumatic cylinder shall be used to accomplish the seat height adjustment.

2. Chairs shall have a forward seat edge flex, or shall tilt at least 1”, and/or have a waterfall edge.

3. Chairs adjustment:

a. Synchronized tilt with a minimum 2:1 back-to-seat recline ratio with a user adjustment for tilt and a means of adjusting the backrest tension. The tension adjustment shall be achieved by a user- adjustable control.

OR

b. The user adjustment for tilt shall be achieved by a weight sensing mechanism.

4. Chairs shall have a tilt lock or stop position mechanism that the user can adjust while seated.

5. The recline angle (angle between the seat and back) shall have an adjustment of 15 degrees or more, and should fall within the range of 90 to approximately 120 degrees from the horizontal position.

6. Chairs shall have a 360 degree swivel.

7. Mesh back fabrics shall have elasticity elongation properties that will not allow the mesh to sag, sink, cradle, or hammock.

8. There shall be no hard edges on the frame’s structure which comes in contact with the user and shall not cause discomfort when changing posture.

9. Chairs shall have a 5-star base with a minimum dimension of 25” in diameter.

Adjustable Arm Requirements:

1. Arm adjustments shall be made without the use of any tools.

2. Chairs shall have a height and width 4-way adjustable arm.

3. The arm depth adjustment shall be independent of the seat depth adjustment.

4. User shall be able to make all arm adjustments while seated.

Material: Chair padding materials and fabric shall comply with the State of California Technical Information Bulletin

C14Chair with Casters

Location Quantity

Warranty/Testing

Total Quantity

FURNITURE FIXTURE + EQUIPMENT SPECIFICATION IA Interior Architects

Camp Mackall SERE Training - 100% Submittal 03.08.19

Fabric/Finish

C15Task Stool

MFG: SitOnIt Style: OnCall Model Number: 90T S1

Width: 26” Depth: 26” Height: 37.5”- 41.5” Wight limit: 250 lbs.

Audio-Visual:101 - AV Technicians Workshop

Task stool; Plastic seat & back - black Built-in pull handle

Warranty Requirements:

1. 10 year – Mechanisms, pneumatic cylinders, casters, arms, and seat pan adjustment.

2. 5 year – Foam and fabric.

3. Warranty shall cover users up to 300 pounds

1. ANSI/BIFMA X5.1 General Purpose Office Chairs

FURNITURE FIXTURE + EQUIPMENT SPECIFICATION IA Interior Architects

Camp Mackall SERE Training - 100% Submittal 03.08.19

General Requirements:

1. A pneumatic cylinder shall be used to accomplish the seat height adjustment.

2. Chairs shall have a forward seat edge flex, or shall tilt at least 1”, and/or have a waterfall edge.

4. Chair adjustment:

a. A user adjustment for tilt and a means of adjusting the backrest tension. The tension adjustment shall be achieved by a user-adjustable control.

OR

b. The user adjustment for tilt shall be achieved by a weight sensing mechanism.

5. Chairs shall have a 360 degree swivel.

6. There shall be no hard edges on the frame’s structure which comes in contact with the user and/or causes discomfort when changing posture.

7. Chairs shall have a 5-star base with a minimum dimension of 25” in diameter.

8. Casters shall be non-marring.

Material: Chair padding materials and fabric shall comply with the State of California Technical Information Bulletin

C15Task Stool

Location Quantity

Warranty/Testing

Total Quantity

FURNITURE FIXTURE + EQUIPMENT SPECIFICATION IA Interior Architects

Camp Mackall SERE Training - 100% Submittal 03.08.19

Fabric/Finish

CA1Utility Cart

Individual Training: 104 - Corridor 2

MFG: Global Industrial Style: Stainless Steel 430 Utility Cart

Width: 18-3/8” Depth: 30-3/4” Height: 33”

FURNITURE FIXTURE + EQUIPMENT SPECIFICATION IA Interior Architects

Camp Mackall SERE Training - 100% Submittal 03.08.19

General Requirements:

1. Utility cart shall be constructed with welded 20 gauge steel posts and 22 gauge shelves

2. Cart shall have rubber casters for mobility

3. Cart shall have min. 300 lb shelf capacity

4. Car shall be a 3-shelf unit

CA1Utility Cart

Location Quantity

Warranty/Testing

Total Quantity

FURNITURE FIXTURE + EQUIPMENT SPECIFICATION IA Interior Architects

Camp Mackall SERE Training - 100% Submittal 03.08.19

Fabric/Finish

D1Metal Desk

Individual Training: 101 - Guard Room Instructor Control: 101 - Instructor Room Audio-Visual: 102 - Interview Room Audio-Visual: 103 - Interview Room Audio-Visual: 104 - Interview Room Audio-Visual: 105 - Interview Room Audio-Visual: 106 - Interview Room Audio-Visual: 107 - Interview Room Audio-Visual: 108 - Interview Room Audio-Visual: 109 - Interview Room Audio-Visual: 110 - Interview Room Audio-Visual: 111 - Interview Room Audio-Visual: 112 - Interview Room Limited Use: 125 - Brief Room

MFG: Steelcase Style: Payback Single-Pedestal Desk Model: TS5AES3048L

Width: 48” Depth: 29.5” Height: 29”

Warranty Requirements:

1.12 year standard warranty

2. 5 year - Laminate warranty

Testing and Standards:

ANSI/BIFMA X5.5-2008

Desk Products ANSI/BIFMA X5.9 Storage Units Work Surface Material-

1. ANSI 208.1 Particleboard Classifications

2. ANSI A208.2 Medium Density Fiberboard

3. ANSI/NEMA LD 3 High Pressure Decorative Laminates (HPDL) Environmental and Sustainability-

1. All proposed products shall be certified as compliant with Indoor Air Quality (IAQ) requirements and shall meet or exceed ANSI/BIFMA X7.1 Standard for Formaldehyde & TVOC Emissions.

2. The product submitted shall have 3rd party certification for Indoor Air Quality (GREENGUARD or equivalent).

Base grade laminate work surface Base grade metal finish, black

FURNITURE FIXTURE + EQUIPMENT SPECIFICATION IA Interior Architects

Camp Mackall SERE Training - 100% Submittal 03.08.19

Modularity Requirements:

All desk components shall be provided by one manufacturer. All items shall meet the specified flexibility and interchangeability requirements of the desk solutions. Furniture is to be modular and non-handed so components can be used anywhere within the facility. Units which are selectively removable and replaceable without disturbing adjacent components shall be provided.

General Requirements:

1. Freestanding units shall have components that include a work surface, floor supports, end supports, back panel, and accommodations for concealing cords and cables.

2. Freestanding units shall be specified complete with no exposed or “raw” parts. Include available covers, fillers, and trims available in the standard GSA specifications guide to provide for a complete and finished appearance and function.

3. Work surfaces shall be fully supported by floor-standing pedestals or other supports such as brackets, legs, panels, etc., following the manufacturer’s standard practices for the size, type, and placement. Size and placement of supports shall not interfere with knee space clearances. All pedestals and supports shall be clearly indicated, including model numbers, on the drawings or in a components listing.

4. The work surface height shall be 28-1/2” to 30” from the finished floor.

5. Freestanding unit end supports shall provide a flush termination at the exposed end of the freestanding unit.

6. Freestanding unit leveling glides shall adjust to allow installation on uneven floors. Minimum adjustment shall be 1-1/2”.

7. Freestanding unit shall have powder coated steel exterior

8. Freestanding unit shall include 2 drawers for storage.

Work Surfaces:

1.Work surfaces shall be constructed of Grade M2 or M3 particleboard or a ~45 lb. medium density fireboard core with a minimum VGS General Purpose Grade High Pressure Laminate on the face and backer material on the underside.

2. Laminates shall be bonded to the core with PVA adhesive in a cold press or hot press to prevent separation of the laminate from the core.

3. Low pressure laminate and thermally fused laminate is non-conforming and will be considered unacceptable.

4. Work surface edges shall be total finished and sealed against moisture with a flat edged, impact resistant vinyl/ABS, or similar plastic, have a radius of at least 1/8”, and be 2mm-3mm thick.

5. Laminate self edges are non-conforming.

6. Abutting work surfaces shall mate closely and at equal heights when used in side-by-side configurations in order to provide a continuous and level work surface.

7. Work surfaces shall include pre-drilled locations holes that ensure accurate and secure attachment of desk supports, storage products, and legs.

D1Metal Desk

Location Quantity

Warranty/Testing

Total Quantity

FURNITURE FIXTURE + EQUIPMENT SPECIFICATION IA Interior Architects

Camp Mackall SERE Training - 100% Submittal 03.08.19

Fabric/Finish

D2Workstation

Steelcase Context Standard Shell Desk with Partial Height Modesty Panel (18: AFF), and Pencil Drawer Width: 60” Depth: 30” Overheads Storage Unit Width: 60” Depth: 13-3/8”

Locking overhead cabinets with tackable surface below.

Cabinets to have receding doors. provide (2) grommets and wire management, Base grade laminate work surface Base grade metal finish

Limited Use: 201 - Team Room 3 Limited Use: 202 - Team Room 2 Limited Use: 203 - Team Room 1 Limited Use: 207 - Training Cell Room Camp Aid: 102 - Medical/Psychologist Office

Warranty Requirements:

1.12 year standard warranty

2. 5 year - Laminate warranty

Testing and Standards:

ANSI/BIFMA X5.5

Desk Products ANSI/BIFMA X5.9 Storage Units Work Surface Material-

1. ANSI 208.1 Particleboard Classifications

2. ANSI A208.2 Medium Density Fiberboard

3. ANSI/NEMA LD 3 High Pressure Decorative Laminates (HPDL) Environmental and Sustainability-

1. All proposed products shall be certified as compliant with Indoor Air Quality (IAQ) requirements and shall meet or exceed ANSI/BIFMA X7.1 Standard for Formaldehyde & TVOC Emissions.

2. The product submitted shall have 3rd party certification for Indoor Air Quality (GREENGUARD or equivalent).

FURNITURE FIXTURE + EQUIPMENT SPECIFICATION IA Interior Architects

Camp Mackall SERE Training - 100% Submittal 03.08.19

Modularity Requirements:

All desk components shall be provided by one manufacturer. All items shall meet the specified flexibility and interchangeability requirements of the desk solutions. Furniture is to be modular and non-handed so components can be used anywhere within the facility. Units which are selectively removable and replaceable without disturbing adjacent components shall be provided.

General Requirements:

1. Freestanding units shall have components that include a work surface, floor supports, end supports, back panel, and accommodations for concealing cords and cables.

2. Freestanding units shall be specified complete with no exposed or “raw” parts. Include available covers, fillers, and trims available in the standard GSA specifications guide to provide for a complete and finished appearance and function.

3. Work surfaces shall be fully supported by floor-standing pedestals or other supports such as brackets, legs, panels, etc., following the manufacturer’s standard practices for the size, type, and placement. Size and placement of supports shall not interfere with kneespace clearances. All pedestals and supports shall be clearly indicated, including model numbers, on the drawings or in a components listing.

4. The work surface height shall be 28-1/2” to 30” from the finished floor.

5. Freestanding unit end supports shall provide a flush termination at the exposed end of the freestanding unit.

6. Freestanding unit leveling glides shall adjust to allow installation on uneven floors. Minimum adjustment shall be 1-1/2”.

Work Surfaces:

1.Work surfaces shall be constructed of Grade M2 or M3 particleboard or a ~45 lb. medium density fireboard core with a minimum VGS General Purpose Grade High Pressure Laminate on the face and backer material on the underside.

2. Laminates shall be bonded to the core with PVA adhesive in a cold press or hot press to prevent separation of the laminate from the core.

3. Low pressure laminate and thermally fused laminate is non-conforming and will be considered unacceptable.

4. Work surface edges shall be total finished and sealed against moisture with a flat edged, impact resistant vinyl/ABS, or similar plastic, have a radius of at least 1/8”, and be 2mm-3mm thick.

5. Laminate self edges are non-conforming.

6. Abutting work surfaces shall mate closely and at equal heights when used in side-by-side configurations in order to provide a continuous and level work surface.

7. Work surfaces hall include predrilled locations holes that ensure accurate and secure attachment of desk supports, storage products, and legs.

Wire Management:

1. Provide concealed wire routing below work surface.

2. All desks, returns, bridges, and other freestanding work surfaces shall provide an option for mounting a modesty panel with at least a 1-1/2” gap between the modesty panel and the underside of the work surface for cable management.

3. A cable tray or cable clips shall be provided to manage cords.

4. All grommets shall be provided with an insert and cap.

Modesty Panels and End Supports:

1. Modesty panels shall be designed to accommodate access to wall outlets 18” from floor.

2. Modesty panels shall be constructed of 20-gauge steel pans with removable 16-gauge attachment brackets for attachment to end supports, peninsula supports, and corner supports

3. Modesty panels shall span the entire width of the work surface or attach to pedestal backs leaving no gaps.

4. End supports shall be constructed of approximately 22-gauge outer and inner pans welded to no less than 14-gauge brackets at the top and bottom.

D2Workstation

FURNITURE FIXTURE + EQUIPMENT SPECIFICATION IA Interior Architects

Camp Mackall SERE Training - 100% Submittal 03.08.19 D2Workstation

Flush Mount Brackets:

1. Flush mount brackets shall be available to connect a return or bridge work surface to the front edge of another work surface, providing support and alignment.

2. Flush mount brackets shall employ a two-plate design so the same bracket package can be used for 18”, 24”, and 30” nominal depth return and bridge work surfaces.

3. Flush mount brackets shall be constructed of approximately 11-gauge steel.

Overhead Storage Units:

1. The vertical clearance between the work surface and the overhead shall be a minimum of 18”.

2. The total height of a desk with overhead storage shall match the height of adjacent storage products including storage towers.

3. Units shall be capable of spanning two work surfaces arranged in an “L” configuration, with one end mounted at the front edge of one work surface and the other end mounted at the back edge of the other work surface.

4. Units shall be capable of being mounted on corner and extended corner work surfaces.

5. Units shall be attached securely with concealed cam-locks, brackets, screws, and/or industrial strength double stick tape, to ensure a rigid assembly.

6. The inside clearance depth shall accommodate a 3-ring binder for 8-1/2” x 11” paper and shall be a minimum overall depth of 13”. The door shall fully close.

7. The minimum inside height clearance shall be 12”.

8. Units shall be 5-sided with a door and fully enclosed back.

9. Units shall be of steel construction in the following gauges:

a. Shelves shall be 18 to 20-gauge steel.

b.Tops shall be 20 to 22-gauge steel.

c. Doors shall be 20 to 24-gauge steel.

Task Lighting:

1. Task lights shall be a standard component of the manufacturer’s furniture products.

2. Task lights shall recess into the bottom of overhead cabinets and shelves.

3. Task lights for 72” wide, and greater, overhead storage bins shall be the no less than 46” wide.

4. All other task lights shall be sized appropriately for the overhead storage bin.

5. Electronic ballasts shall be provided to eliminate fluorescent lamp flicker and computer screen interference. Shared ballasts shall not be used.

6. Task lights shall provide glare control.

7. Task lights shall have an easily accessible on-off switch.

8. Daisy chain cords shall be available for the modular connection of shelf lights.

9. All fixture diffusers, grilles, or other coverings shall be easily removable to permit cleaning and replacement.

10. Task lights shall be UL listed and labeled.

Location Quantity

Warranty/Testing

Total Quantity

FURNITURE FIXTURE + EQUIPMENT SPECIFICATION IA Interior Architects

Camp Mackall SERE Training - 100% Submittal 03.08.19

Fabric/Finish

D3Double Ped Desk

Steelcase Context Standard Shell Desk with Partial Height Modesty Panel (18: AFF), and Pencil Drawer Width: 60” Depth: 30” Overheads Storage Unit Width: 60” Depth: 13-3/8”

Locking overhead cabinets with tackable surface below.

Cabinets to have receding doors. provide (2) grommets and wire management

Limited Use: 126 - NCOIC Limited Use: 127 - Senior Civilian Office

Base grade laminate work surface Base grade metal finish

Warranty Requirements:

1.12 year standard warranty

2. 5 year - Laminate warranty

Testing and Standards:

ANSI/BIFMA X5.5

Desk Products ANSI/BIFMA X5.9 Storage Units Work Surface Material-

1. ANSI 208.1 Particleboard Classifications

2. ANSI A208.2 Medium Density Fiberboard

3. ANSI/NEMA LD 3 High Pressure Decorative Laminates (HPDL) Environmental and Sustainability-

1. All proposed products shall be certified as compliant with Indoor Air Quality (IAQ) requirements and shall meet or exceed ANSI/BIFMA X7.1 Standard for Formaldehyde & TVOC Emissions.

2. The product submitted shall have 3rd party certification for Indoor Air Quality (GREENGUARD

FURNITURE FIXTURE + EQUIPMENT SPECIFICATION IA Interior Architects

Camp Mackall SERE Training - 100% Submittal 03.08.19

Modularity Requirements:

All desk components shall be provided by one manufacturer. All items shall meet the specified flexibility and interchangeability requirements of the desk solutions. Furniture is to be modular and non-handed so components can be used anywhere within the facility. Units which are selectively removable and replaceable without disturbing adjacent components shall be provided.

General Requirements:

1. Freestanding units shall have components that include a work surface, floor supports, end supports, back panel, and accommodations for concealing cords and cables.

2. Freestanding units shall be specified complete with no exposed or “raw” parts. Include available covers, fillers, and trims available in the standard GSA specifications guide to provide for a complete and finished appearance and function.

3. Work surfaces shall be fully supported by floor-standing pedestals or other supports such as brackets, legs, panels, etc., following the manufacturer’s standard practices for the size, type, and placement. Size and placement of supports shall not interfere with kneespace clearances. All pedestals and supports shall be clearly indicated, including model numbers, on the drawings or in a components listing.

4. The work surface height shall be 28-1/2” to 30” from the finished floor.

5. Freestanding unit end supports shall provide a flush termination at the exposed end of the freestanding unit.

6. Freestanding unit leveling glides shall adjust to allow installation on uneven floors. Minimum adjustment shall be 1-1/2”.

Work Surfaces:

1.Work surfaces shall be constructed of Grade M2 or M3 particleboard or a ~45 lb. medium density fireboard core with a minimum VGS General Purpose Grade High Pressure Laminate on the face and backer material on the underside.

2. Laminates shall be bonded to the core with PVA adhesive in a cold press or hot press to prevent separation of the laminate from the core.

3. Low pressure laminate and thermally fused laminate is non-conforming and will be considered unacceptable.

4. Work surface edges shall be total finished and sealed against moisture with a flat edged, impact resistant vinyl/ABS, or similar plastic, have a radius of at least 1/8”, and be 2mm-3mm thick.

5. Laminate self edges are non-conforming.

6. Abutting work surfaces shall mate closely and at equal heights when used in side-by-side configurations in order to provide a continuous and level work surface.

7. Work surfaces hall include predrilled locations holes that ensure accurate and secure attachment of desk supports, storage products, and legs.

Wire Management:

1. Provide concealed wire routing below work surface.

2. All desks, returns, bridges, and other freestanding work surfaces shall provide an option for mounting a modesty panel with at least a 1-1/2” gap between the modesty panel and the underside of the work surface for cable management.

3. A cable tray or cable clips shall be provided to manage cords.

4. All grommets shall be provided with an insert and cap.

Modesty Panels and End Supports:

1. Modesty panels shall be designed to accommodate access to wall outlets 18” from floor.

2. Modesty panels shall be constructed of 20-gauge steel pans with removable 16-gauge attachment brackets for attachment to end supports, peninsula supports, and corner supports

3. Modesty panels shall span the entire width of the work surface or attach to pedestal backs leaving no gaps.

4. End supports shall be constructed of approximately 22-gauge outer and inner pans welded to no less than 14-gauge

D3Double Ped Desk

FURNITURE FIXTURE + EQUIPMENT SPECIFICATION IA Interior Architects

Camp Mackall SERE Training - 100% Submittal 03.08.19

Flush Mount Brackets:

1. Flush mount brackets shall be available to connect a return or bridge work surface to the front edge of another work surface, providing support and alignment.

2. Flush mount brackets shall employ a two-plate design so the same bracket package can be used for 18”, 24”, and 30” nominal depth return and bridge work surfaces.

3. Flush mount brackets shall be constructed of approximately 11-gauge steel.

Overhead Storage Units:

1. The vertical clearance between the work surface and the overhead shall be a minimum of 18”.

2. The total height of a desk with overhead storage shall match the height of adjacent storage products including storage towers.

3. Units shall be capable of spanning two work surfaces arranged in an “L” configuration, with one end mounted at…