BR79439vol1_SPECS.pdf

RFP No. W912PM18R0004

Advanced Skills Training Facility

PN: 79439

Fort Bragg, North Carolina

Specifications – Volume 1 of 4 (Division 00 thru Division 07)

April 2018

Fort Bragg North Carolina

Design Bid Build Solicitation

W912PM-18-R-0004

Advanced Skills Training Facility Volume 1 of 3: Division 01 - 07

FY 16 PN 79439

March 2018

U.S. ARMY ENGINEER DISTRICT, SAVANNAH

CORPS OF ENGINEERS

100 WEST OGLETHORPE AVENUE

SAVANNAH, GEORGIA 31401-3640

US Army Corps of Engineers Wilmington District District

Advanced Ski l l s Tr ai ni ng Faci l i t y BR79439 Ft . Br agg, NC

PROJECT TABLE OF CONTENTS

DI VI SI ON 00 - PROCUREMENT AND CONTRACTI NG REQUI REMENTS

STANDARD FORM 1442

00 10 00 SOLI CI TATI ON, CONTRACT LI NE I TEM NUMBER ( CLI N) SCHEDULE

00 21 16 I NSTRUCTI ONS TO PROPOSERS

00 45 00 REPRESENTATI ONS AND CERTI FI CATI ONS

00 70 00 CONDI TI ONS OF THE CONTRACT

00 73 00 SUPPLEMENTARY CONDI TI ONS

DI VI SI ON 01 - GENERAL REQUI REMENTS

01 10 00. 10 38 SUPPLEMENTARY SPECI AL CONTRACT REQUI REMENTS

01 11 00 SUMMARY OF WORK

01 14 00 CONSTRUCTI ON SECURI TY REQUI REMENTS AND WORK RESTRI CTI ONS

01 32 01. 00 10 PROJECT SCHEDULE

01 33 00 SUBMI TTAL PROCEDURES

01 33 29 SUSTAINABILITY

01 35 26 GOVERNMENTAL SAFETY REQUI REMENTS

01 42 00 SOURCES FOR REFERENCE PUBLI CATI ONS

01 45 00. 00 10 QUALI TY CONTROL

01 45 00. 15 10 RESI DENT MANAGEMENT SYSTEM CONTRACTOR MODE ( RMS CM)

01 45 35 SPECI AL I NSPECTI ONS

01 50 00 TEMPORARY CONSTRUCTI ON FACI LI TI ES AND CONTROLS

01 57 19 TEMPORARY ENVI RONMENTAL CONTROLS

01 57 19. 00 37 I NDOOR AI R QUALI TY ( I AQ) MANAGEMENT

01 74 19. 00 37 CONSTRUCTI ON AND DEMOLI TI ON WASTE MANAGEMENT

01 78 00 CLOSEOUT SUBMI TTALS

01 78 23 OPERATI ON AND MAI NTENANCE DATA

01 83 16. 00 37 EXTERI OR ENCLOSURE PERFORMANCE REQUI REMENTS

01 91 00. 00 37 COMMISSIONING

DI VI SI ON 02 - EXI STI NG CONDI TI ONS

02 41 00 DEMOLITION

02 82 13. 00 10 ASBESTOS ABATEMENT

DI VI SI ON 03 - CONCRETE

03 11 13. 00 10 STRUCTURAL CAST- I N- PLACE CONCRETE FORMI NG

03 15 00. 00 10 CONCRETE ACCESSORI ES

03 20 00. 00 10 CONCRETE REI NFORCI NG

03 30 00. 00 10 CAST- I N- PLACE CONCRETE

03 35 00. 00 10 CONCRETE FI NI SHI NG

03 39 00. 00 10 CONCRETE CURI NG

03 42 13. 00 10 PLANT- PRECAST CONCRETE PRODUCTS FOR BELOW GRADE

CONSTRUCTION

03 45 00 PRECAST ARCHI TECTURAL CONCRETE

DI VI SI ON 04 - MASONRY

04 20 00 UNI T MASONRY

DI VI SI ON 05 - METALS

05 05 23. 16 STRUCTURAL WELDI NG

05 12 00 STRUCTURAL STEEL

05 30 00 STEEL DECKS

PROJECT TABLE OF CONTENTS Page 1

05 40 00 COLD- FORMED METAL FRAMI NG

05 45 00 PRE- ENGI NEERED LI GHT GAGE STEEL TRUSSES

05 50 13 MI SCELLANEOUS METAL FABRI CATI ONS

05 51 00 METAL STAI RS

05 52 00 METAL RAI LI NGS

DI VI SI ON 06 - WOOD, PLASTI CS, AND COMPOSI TES

06 10 00 ROUGH CARPENTRY

06 20 00 FI NI SH CARPENTRY

06 41 16. 00 10 PLASTI C- LAMI NATE- CLAD ARCHI TECTURAL CABI NETS

06 61 16 SOLI D SURFACI NG FABRI CATI ONS

DI VI SI ON 07 - THERMAL AND MOI STURE PROTECTI ON

07 12 00 BUI LT- UP BI TUMI NOUS WATERPROOFI NG

07 21 13 BOARD AND BLOCK I NSULATI ON

07 21 16 MI NERAL FI BER BLANKET I NSULATI ON

07 22 00 ROOF AND DECK I NSULATI ON

07 24 00 EXTERI OR I NSULATI ON AND FI NI SH SYSTEMS

07 31 13 ASPHALT SHI NGLES

07 60 00 FLASHI NG AND SHEET METAL

07 61 14. 00 20 STEEL STANDI NG SEAM ROOFI NG

07 84 00 FIRESTOPPING

07 92 00 JOI NT SEALANTS

DI VI SI ON 08 - OPENI NGS

08 11 13 STEEL DOORS AND FRAMES

08 11 16 ALUMI NUM DOORS AND FRAMES

08 14 00 WOOD DOORS

08 33 23 OVERHEAD COI LI NG DOORS

08 34 02 BULLET- RESI STANT COMPONENTS

08 34 73 SOUND CONTROL DOOR ASSEMBLI ES

08 41 13 ALUMI NUM- FRAMED ENTRANCES AND STOREFRONTS

08 51 13 ALUMI NUM WI NDOWS

08 71 00 DOOR HARDWARE

08 81 00 GLAZING

08 91 00 METAL WALL AND DOOR LOUVERS

DI VI SI ON 09 - FI NI SHES

09 06 90 COLOR SCHEDULE

09 22 00 SUPPORTS FOR PLASTER AND GYPSUM BOARD

09 29 00 GYPSUM BOARD

09 30 10 CERAMI C, QUARRY, AND GLASS TI LI NG

09 51 00 ACOUSTI CAL CEI LI NGS

09 62 38 STATI C- CONTROL FLOORI NG

09 65 00 RESI LI ENT FLOORI NG

09 68 00 CARPETING

09 69 13 RI GI D GRI D ACCESS FLOORI NG

09 90 00 PAI NTS AND COATI NGS

DI VI SI ON 10 - SPECI ALTI ES

10 11 00 VI SUAL DI SPLAY UNI TS

10 14 00. 10 EXTERI OR SI GNAGE

10 14 00. 20 I NTERI OR SI GNAGE

10 21 13 TOI LET COMPARTMENTS

PROJECT TABLE OF CONTENTS Page 2

10 22 13 WI RE MESH PARTI TI ONS

10 22 39 FOLDI NG PANEL PARTI TI ONS

10 26 00 WALL AND DOOR PROTECTI ON

10 28 13 TOI LET ACCESSORI ES

10 44 43. 00 37 FI RE EXTI NGUI SHER ACCESSORI ES

10 51 13 METAL LOCKERS

10 55 23. 00 37 RECESSED CELL PHONE STORAGE UNI T

DI VI SI ON 11 - EQUI PMENT

11 31 13. 48 GARBAGE DI SPOSALS

DI VI SI ON 12 - FURNI SHI NGS

12 24 13 ROLLER WI NDOW SHADES

12 48 13 ENTRANCE FLOOR MATS AND FRAMES

DI VI SI ON 13 - SPECI AL CONSTRUCTI ON

13 48 00 SEI SMI C PROTECTI ON FOR MI SCELLANEOUS EQUI PMENT

13 48 00. 00 10 SEI SMI C PROTECTI ON FOR MECHANI CAL EQUI PMENT

13 49 20. 00 10 RFI / EMI SHI ELDI NG

DI VI SI ON 14 - CONVEYI NG EQUI PMENT

14 24 23 HYDRAULI C PASSENGER ELEVATORS

DI VI SI ON 21 - FI RE SUPPRESSI ON

21 13 13. 00 10 WET PI PE SPRI NKLER SYSTEM, FI RE PROTECTI ON

21 30 00 FI RE PUMPS

DI VI SI ON 22 - PLUMBI NG

22 00 00 PLUMBI NG, GENERAL PURPOSE

DI VI SI ON 23 - HEATI NG, VENTI LATI NG, AND AI R CONDI TI ONI NG ( HVAC)

23 00 00 AI R SUPPLY, DI STRI BUTI ON, VENTI LATI ON, AND EXHAUST SYSTEMS

23 03 00. 00 20 BASI C MECHANI CAL MATERI ALS AND METHODS

23 05 15 COMMON PI PI NG FOR HVAC

23 05 48. 00 40 VI BRATI ON AND SEI SMI C CONTROLS FOR HVAC PI PI NG AND

EQUIPMENT

23 05 93 TESTI NG, ADJUSTI NG, AND BALANCI NG FOR HVAC

23 07 00 THERMAL I NSULATI ON FOR MECHANI CAL SYSTEMS

23 09 23 LONWORKS DI RECT DI GI TAL CONTROL FOR HVAC AND OTHER

BUI LDI NG CONTROL SYSTEMS

23 23 00 REFRI GERANT PI PI NG

23 57 10. 00 10 FORCED HOT WATER HEATI NG SYSTEMS USI NG WATER HEAT

EXCHANGERS

23 64 26 CHI LLED, CHI LLED- HOT, AND CONDENSER WATER PI PI NG SYSTEMS

23 81 00. 00 20 UNI TARY AI R CONDI TI ONI NG EQUI PMENT

23 82 02. 00 10 UNI TARY HEATI NG AND COOLI NG EQUI PMENT

DI VI SI ON 26 - ELECTRI CAL

26 05 48. 00 10 SEI SMI C PROTECTI ON FOR ELECTRI CAL EQUI PMENT

26 08 00 APPARATUS I NSPECTI ON AND TESTI NG

26 20 00 I NTERI OR DI STRI BUTI ON SYSTEM

PROJECT TABLE OF CONTENTS Page 3

26 28 01. 00 10 COORDI NATED POWER SYSTEM PROTECTI ON

26 29 23 VARI ABLE FREQUENCY DRI VE SYSTEMS UNDER 600 VOLTS

26 32 33. 00 10 UNI NTERRUPTI BLE POWER SUPPLY ( UPS) SYSTEM ABOVE 15 KVA

CAPACITY

26 41 00 LI GHTNI NG PROTECTI ON SYSTEM

26 51 00 I NTERI OR LI GHTI NG

DI VI SI ON 27 - COMMUNI CATI ONS

27 10 00 BUI LDI NG TELECOMMUNI CATI ONS CABLI NG SYSTEM

27 54 00. 00 20 COMMUNI TY ANTENNA TELEVI SI ON ( CATV) SYSTEMS

DI VI SI ON 28 - ELECTRONI C SAFETY AND SECURI TY

28 16 01. 00 10 SMALL I NTRUSI ON DETECTI ON SYSTEM

28 20 01. 00 10 ELECTRONI C SECURI TY SYSTEM

28 23 23. 00 10 CLOSED CI RCUI T TELEVI SI ON SYSTEMS

28 31 76 I NTERI OR FI RE ALARM AND MASS NOTI FI CATI ON SYSTEM

DI VI SI ON 31 - EARTHWORK

31 00 00 EARTHWORK

31 11 00 CLEARI NG AND GRUBBI NG

31 31 16. 13 CHEMI CAL TERMI TE CONTROL

31 32 11 SOI L SURFACE EROSI ON CONTROL

DI VI SI ON 32 - EXTERI OR I MPROVEMENTS

32 01 19 FI ELD MOLDED SEALANTS FOR SEALI NG JOI NTS I N RI GI D

PAVEMENTS

32 05 33 LANDSCAPE ESTABLI SHMENT

32 11 16 BASE COURSE FOR RI GI D PAVI NG

32 11 23 AGGREGATE AND/ OR GRADED- CRUSHED AGGREGATE BASE COURSE

32 12 10 BI TUMI NOUS TACK AND PRI ME COATS

32 12 17 HOT MI X BI TUMI NOUS PAVEMENT

32 13 13. 06 PORTLAND CEMENT CONCRETE PAVEMENT FOR ROADS AND SI TE

FACILITIES

32 16 13 CONCRETE SI DEWALKS AND CURBS AND GUTTERS

32 17 24. 00 10 PAVEMENT MARKI NGS

32 31 13. 53 HI GH- SECURI TY CHAI N LI NK FENCES AND GATES

32 92 19 SEEDING

32 92 23 SODDING

32 93 00 EXTERI OR PLANTS

DI VI SI ON 33 - UTI LI TI ES

33 40 00 STORM DRAI NAGE UTI LI TI ES

33 61 13 PRE- ENGI NEERED UNDERGROUND HEAT DI STRI BUTI ON SYSTEM

33 61 13. 13 PREFABRI CATED UNDERGROUND HYDRONI C ENERGY DI STRI BUTI ON

33 61 13. 19 VALVES, PI PI NG, AND EQUI PMENT I N VALVE MANHOLES

33 71 02 UNDERGROUND ELECTRI CAL DI STRI BUTI ON

33 82 00 TELECOMMUNI CATI ONS OUTSI DE PLANT ( OSP)

PROJECT TABLE OF CONTENTS Page 4

APPENDICES

Appendi x A PROJECT SPECI AL PROVI SI ONS Appendi x B ASBESTOS SURVEYS

- - End of Pr oj ect Tabl e of Cont ent s - -

PROJECT TABLE OF CONTENTS Page 5

W912PM-18-R-0004 Construct SOF Advnaced Skills Training Facility, Fort Bragg, NC

This procurement is being solicited and procured using the Best Value Trade-Off source selection process. This Request for Proposal is issued in accordance w ith FAR Part 15.101-1.

This is an unrestricted solicitation.

The Magnitude of Construction is betw een $25,000,000.00 and $100,000,000.00.

Point of Contact:

Michael Mullen michael.m.mullen@usace.army.mil 910-251-4710

MICHAEL M MULLEN 910-251-4710

NOTE: In sealed bid solicitations "offer" and "offeror" mean "bid" and "bidder".

10. THE GOVERNMENT REQUIRES PERFORMANCE OF THE WORK DESCRIBED IN THESE DOCUMENTS

NEGOTIATED

06-Apr-2018

(RFP)

(IFB)

X

CALL:

B. TELEPHONE NO. (Include area code) (NO COLLECT CALLS)

See Item 7

2. TYPE OF SOLICITATION

SEALED BID

3. DATE ISSUED

9. FOR INFORMATION A. NAME

SOLICITATION

NSN 7540-01-155-3212 1442-101 STANDARD FORM 1442 (REV. 4-85)

Prescribed by GSA FAR (48 CFR) 53.236-1(e)

11. The Contractor shall begin performance w ithin _______10 calendar days and complete it w ithin ________540 calendar days after receiving aw ard, X notice to proceed. This performance period is X mandatory, negotiable. (See _________________________00 73 00

12 A. THE CONTRACTOR MUST FURNISH ANY REQUIRED PERFORMANCE AND PAYMENT BONDS?

(If "YES," indicate within how many calendar days after award in Item 12B.)

X YES NO

13. ADDITIONAL SOLICITATION REQUIREMENTS:

A. Sealed offers in original and __________1 copies to perform the w ork required are due at the place specif ied in Item 8 by ___________ local time ______________08 May 2018 (date). If this is a sealed bid solicitation, offers must be publicly opened at that time.

shall be marked to show the offeror's name and address, the solicitation number, and the date and time offers are due.

B. An offer guarantee X is, is not required.

C. All offers are subject to the (1) w ork requirements, and (2) other provisions and clauses incorporated in the solicitation in full text or by reference.

D. Offers providing less than _______90 calendar days for Government acceptance after the date offers are due w ill not be considered and w ill be rejected.

SOLICITATION, OFFER,

AND AWARD

(Construction, Alteration, or Repair)

1. SOLICITATION NO.

IMPORTANT - The "offer" section on the reverse must be fully completed by offeror.

4. CONTRACT NO.

7. ISSUED BY CODE

U S ARMY CORPS OF ENGINEERS, WILMINGTON

WILMINGTON DISTRICT

ATTN: CONTRACTING DIVISION

69 DARLINGTON AVE

WILMINGTON NC 28403-1343

W912PM

PAGE OF PAGES

1 OF

CODE

(Title, identifying no., date):

12B. CALENDAR DAYS

02:00 PM (hour)

Sealed envelopes containing offers

5. REQUISITION/PURCHASE REQUEST NO. 6. PROJECT NO.

8. ADDRESS OFFER TO (If Other Than Item 7)

910-251-4454FAX:TEL: 910-251-4700 TEL: FAX:

W912PM-18-R-0004 120

20B. SIGNATURE

(REV. 4-85)STANDARD FORM 1442 BACK

TO SIGN

NSN 7540-01-155-3212

SOLICITATION, OFFER, AND AWARD (Continued) (Construction, Alteration, or Repair)

CODE FACILITY CODE

17. The offeror agrees to perform the w ork required at the prices specif ied below in strict accordance w ith the terms of this solicitation, if this offer is accepted by the Government in w riting w ithin ________ calendar days after the date offers are due.

the minimum requirements stated in Item 13D. Failure to insert any number means the offeror accepts the minimum in Item 13D.)

AMOUNTS SEE SCHEDULE OF PRICES

18. The offeror agrees to furnish any required performance and payment bonds.

19. ACKNOWLEDGMENT OF AMENDMENTS

(The offeror acknowledges receipt of amendments to the solicitation -- give number and date of each)

AMENDMENT NO.

DATE

20A. NAME AND TITLE OF PERSON AUTHORIZED TO SIGN

OFFER (Type or print)

AWARD (To be completed by Government)

21. ITEMS ACCEPTED:

22. AMOUNT 23. ACCOUNTING AND APPROPRIATION DATA

24. SUBMIT INVOICES TO ADDRESS SHOWN IN ITEM

(4 copies unless otherwise specified)

CODE

(Insert any number equal to or greater than

20C. OFFER DATE

25. OTHER THAN FULL AND OPEN COMPETITION PURSUANT TO

10 U.S.C. 2304(c) 41 U.S.C. 253(c)

CODE27. PAYMENT WILL BE MADE BY:26. ADMINISTERED BY

(Include ZIP Code)14. NAME AND ADDRESS OF OFFEROR 15. TELEPHONE NO. (Include area code)

See Item 14

(Include only if different than Item 14)16. REMITTANCE ADDRESS

30B. SIGNATURE

29. AWARD (Contractor is not required to sign this document.)

document and return _______ copies to issuing office.) Contractor agrees Your of f er on this solicitation, is hereby accepted as to the items listed. This award con-to f urnish and deliv er all items or perf orm all work, requisitions identif ied summates the contract, which consists of (a) the Gov ernment solicitation and on this f orm and any continuation sheets f or the consideration stated in this y our of f er, and (b) this contract award. No f urther contractual document is contract. The rights and obligations of the parties to this contract shall be necessary .

gov erned by (a) this contract award, (b) the solicitation, and (c) the clauses, representations, certif ications, and specif ications or incorporated by ref er-ence in or attached to this contract.

30A. NAME AND TITLE OF CONTRACTOR OR PERSON AUTHORIZED 31A. NAME OF CONTRACTING OFFICER (Type or print)

30C. DATE

(Type or print)

TEL: EMAIL:

31B. UNITED STATES OF AMERICA 31C. AWARD DATE

BY

CONTRACTING OFFICER WILL COMPLETE ITEM 28 OR 29 AS APPLICABLE

(Contractor is required to sign this28. NEGOTIATED AGREEMENT

(M ust be fully completed by offeror)OFFER

W912PM-18-R-0004

Section 00 01 10 - Table of Contents

Exhibit/Attachment Table of Contents

DOCUMENT TYPE DESCRIPTION PAGES DATE

Attachment 1 Attachment 1

Attachment 2 Attachment 2

Attachment 3 Attachment 3

Attachment 4 Attachment 4

Attachment 5 Attahcment 5

Attachment 6 Attachment 6

Section 00 10 00 - Solicitation, Contract Line Item Number (CLIN) Schedule

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 1 Job BASE BID: Constuction Advanced Skills Training Facility - Complete

In accordance with all Plans and Specifications

FOB: Destination

NET AMT

0002 1 Job BASE BID: Site Development Outside Five (5) Foot line - Complete

0003 1 Job BASE BID: Payment and Performance Bonds - Complete

0004 1 Job OPTION Optional Bid Item 1: Construct Upgrade of Ardennes - Compete

OPTION Optional Bid Item 2: FF&E Furniture, Fixtures & Equipment in accordance with all Plans and Specifications - Complete

0005AA 1 Job OPTION Optional Bid Item 2: Furniture, Fixtures & Equipment:

Purchase & Delivery

0005AB 1 Job OPTION Optional Bid Item 2: Furniture, Fixtures & Equipment:

Installation Complete

OPTION Optional Bid Item 3: Audio Visual Equipment:

SEE ATTACHMENT 6 - Audio Visual Equipment Pricing Worksheet

Purchase Delivery and Installation - Complete. In Accordance With all Plans and

Specifications.

0006AA 1 Job

Purchase and Delivery

0006AB 1 Job

OPTION Optional Bid Item 4: ESS Electronic Security System, Advanced Skills Training Facility: CCTV in accordance with all Plans and

Specifications - Complete

0007AA 1 Job OPTION Optional Bid Item 4: CCTV:

0007AB 1 Job OPTION Optional Bid Item 4: CCTV:

OPTION Optional Bid Item 5: ESS Electronic Security System, Advanced Skills Training Facility: Intrusion Detection System (IDS) in accordance with all Plans and Specifications - Complete

0008AA 1 Job OPTION Optional Bid Item 5: IDS:

0008AB 1 Job OPTION Optional Bid Item 5: IDS:

OPTION Optional Bid Item 6: ESS Electronic Security System, Advanced Skills Training Facility: Access Control in accordance with all Plans and

Specifications - Complete

0009AA 1 Job OPTION Optional Bid Item 6: Access Control:

0009AB 1 Job OPTION Optional Bid Item 6: Access Control:

Section 00 21 16 - Instructions to Proposers

NOTICE TO OFFERORS

SUBTOTAL Base Bid Items; CLINS 0001 – 0003 $______________________

SUBTOTAL Optional Bid Item 0001, CLIN 0004 $________________________

SUBTOTAL Optional Bid Item 0002, CLIN 0005 $________________________

SUBTOTAL Optional Bid Item 0003, CLIN 0006 $________________________

SUBTOTAL Optional Bid Item 0004, CLIN 0007 $________________________

SUBTOTAL Optional Bid Item 0005, CLIN 0008 $________________________

SUBTOTAL Optional Bid Item 0006, CLIN 0009 $________________________

SUBTOTAL of all Optional Bid Items; CLINS 0004-0009 $________________________

TOTAL AMOUNT OF ALL LINE ITEMS 0001-0009 $________________________

PERIOD OF PERFORMANCE ____ 540__ _______

NOTICE TO OFFERORS

NOTE 1:

The period of performance of all CLIN’s shall run concurrently with the entire contract duration so that the period of performance shall not exceed 540 calendar days.

NOTE 2:

The exercise of all optional bid items 1 through 6 (CLIN’s 0004-0009) shall be subject to the availability of funds.

NOTE 3:

The government reserves the right to exercise optional bid items 1, (CLIN 0004) within 90 days after award of the base contract.

NOTE 4:

The government reserves the right to exercise optional bid items 2 through 6 (CLIN’s 0005-0009) by no later than

360 Days after Notice To Proceed.

SCOPE OF WORK

See Description at 1.1 General Proposal Submission Instructions & Requirements.

INSTRUCTIONS AND REQUIREMENTS

GENERAL PROPOSAL SUBMISSION INSTRUCTIONS & REQUIREMENTS

PN79439

SOF Advanced Skills Training Facility

Fort Bragg, NC

1. OVERVIEW.

1.1 This Request for Proposal (RFP) solicits construction of a new building of approximately

68,000 SF, three-story Advanced Skills Training Facility. The Advanced Skills Training Facility will include administrative/operations spaces, work / planning rooms, classrooms (XXI), video teleconference (VTC) rooms, interview rooms, break areas, ADA compliant restrooms, storage and supply space, and a loading area. A Secure Area will be provided in accordance with ICD /

ICS Technical Guidance. TEMPEST requirements, if any, are pending. Built-in building systems include fire alarm/mass notification, fire suppression, energy management controls, telephone, advanced unclassified and classified communications networks, cable television, intrusion detection, closed circuit surveillance, electronic access control, and a protected distribution system (PDS). Supporting facilities include site preparation, utilities (electrical, water, sanitary sewer, natural gas, chilled water, and information systems), lighting, vehicle parking, access drives and roads, curb and gutter, sidewalks, storm drainage, landscaping, and other site improvements. Special construction includes a controlled access area, sustainable construction features complying with Leadership in Energy and Environmental Design (LEED) "Silver.”

Access for persons with disabilities will be provided. Comprehensive interior design and audio visual services are included. The project includes demolition and disposal of current, dilapidated facilities. Antiterrorism/Force protection measures and sustainment mandates will be incorporated. The resultant contract will be Firm-Fixed Price (FFP).

1.2 The purpose of the Source Selection plan is to establish a uniform evaluation procedure for the technical evaluation of proposals by the Source Selection Evaluation Board (SSEB) and the development of the Best Value Decision by the Source Selection Authority (SSA) using the

Trade-Off Process (See Federal Acquisition Regulation 15.101-1). The proposal shall describe the capability of the offeror to perform the contract. The proposal should be specific and complete in every detail as well as be prepared simply and economically, providing a straightforward and concise description of capabilities to satisfactorily perform the contract as set forth in these instructions and requirements.

1.3 For the purposes of this solicitation, the Government will utilize a Price Performance Trade-off (PPT) Process. In the PPT process, interested offerors submit certain specified performance and capability proposals in conjunction with price proposals for review and consideration by the

Government. The Government will evaluate these performance capability proposals in accordance with the criteria described herein.

2. GENERAL INSTRUCTIONS.

In accordance with FAR Clause 52.215-1, Instructions to Offerors – Competitive Acquisitions, the Government reserves the right to make award without discussions. Therefore, offerors should submit their best technical and price terms in their initial offer and not automatically assume that they will have an opportunity to participate in discussions or to submit a revised offer. The Government may make award of a conforming proposal without discussions, if deemed to be within the best interests of the Government.

In accordance with 15.306(c)(1) and FAR Clause 52.215-1(f)(4), Instructions to Offerors –

Competitive Acquisitions,the Government reserves the right to conduct discussions if the

Contracting Officer later determines them to be necessary. If the Contracting Officer determines that the number of proposals that would otherwise be in the competitive range exceeds the number at which an efficient competition can be conducted, the Contracting Officer may limit the number of proposals in the competitive range to the greatest number that will permit an efficient competition among the most highly rated proposals.

2.1 Contractor Team Arrangements. The Government will recognize the integrity and validity of contractor teaming arrangements, provided the arrangements are identified and company relationships are fully disclosed in the offer. As further described in paragraph 2.3, below, the

Government will only evaluate the information submitted by the legal entity with whom the

Government would enter into a contract. This is the legal entity represented in Tab E, as registered in System for Award Management (SAM) and identified by its specifically assigned

CAGE Code.

2.2 If applicable, the offeror shall submit evidence from the offeror’s SBA Servicing Agency that the offeror has notified and discussed the proposed joint venture for this project with the appropriate SBA personnel. For 8(a) set- aside procurements, all prospective Joint Ventures must comply with Title 13 Code of Federal Regulations (CFR) Part 124.513. For HUBZone set- aside procurements and awards to HUBZone SBCs through full and open competition after a price evaluation preference in favor of qualified HUBZone SBCs, a Joint Venture must comply with

13 CFR 126.616.

2.3 The Government will only evaluate the information submitted by the legal entity with whom the Government would enter into a contract. This is the legal entity represented in

Tab E, as registered in System for Award Management (SAM) and identified by its specifically assigned CAGE Code. However, IAW CFR 125.8(e), the Government will also evaluate past experience and past performance submitted by the individual firms that make up a joint venture.

2.4 Notwithstanding the specific requirements of any other area of the RFP, information submitted about any company other than the offeror, whether a predecessor company, affiliated company, subsidiary (including wholly owned subsidiaries), or subcontractor, WILL NOT be evaluated for any factor.

2.5 Offerors shall submit their proposal to the address shown in Block 7 of Standard Form 1442.

2.6 Proposals are due no later than the time and date specified in Block 13 of Standard Form

1442.

3. GENERAL PROPOSAL FORMAT.

3.1 Cover Page. Include the title of the solicitation, solicitation number, offeror name, and date of the submittal.

3.2 Table of Contents. Each volume of the proposal shall contain a detailed table of contents. If more than one Adobe PDF file is used for a volume, the complete table of contents shall be included in each. Any materials submitted but not required by this solicitation (such as company brochures) shall be relegated to appendices.

3.3 All information intended to be evaluated as part of the Technical Proposal must be submitted as part of the Technical Proposal. Do not cross-reference similar material in the Price Proposal, or vice versa. No dollar amounts from the Price Proposal are to be included in the Technical proposal.

3.4 Each offeror must submit both a Price Proposal and a Technical Proposal via the AMRDEC

SAFE website. No hard paper copies will be accepted or evaluated. Both the Price Proposal and the Technical Proposal must be received by the closing date and time set for receipt of proposals.

In an effort to reduce paperwork and reduce cost, all proposals shall be submitted electronically.

All submissions shall be in Adobe PDF format and shall be on 8 ½ x 11 size pages in no less than a 10 pitch or 10 font. Page limitations, where specified in the RFP, shall be considered a maximum. Offerors may use compressions utility software such as WinZip or PKZip to reduce file size and facilitate transmission.

Title the file(s) in the following format:

W912PM-18-R-0004_COMPANY NAME_VOLUME I

W912PM-18-R-0004_COMPANY NAME_VOLUME II

Submit the Price and Technical proposals electronically via the AMRDEC SAFE website at:

https://safe.amrdec.army.mil/SAFE/welcome.aspx. At the AMRDEC SAFE website, select the blue button labeled ‘Click Here’, below the ‘Non-CAC Users’ title. Register, access the site and submit your proposal(s). [Note: It has been reported that documents are more quickly uploaded into the AMRDEC SAFE website when using a Firefox web browser. The Government cannot verify that this is true and offers no guarantee that offerors will have more success utilizing any particular browser.]

When your proposal is submitted via the AMRDEC SAFE website, the website will provide notification of the submittal to the Government recipients. When completing the information for transmittal at the AMRDEC SAFE website, you will be required to enter email addresses for the recipients. For this solicitation, the recipients will be the Contracting Officer and Contract

Specialist. The Contract Specialist for this project is Michael Mullen, whose email address is michael.m.mullen@usace.army.mil. The Contracting Officer for this project is Mr. John Hill, mailto:michael.m.mullen@usace.army.mil whose email address is john.t.hill@usace.army.mil. These email addresses are the ones you will enter as recipients.

In addition, after uploading your documents, you will be required to verify your email address before AMRDEC will send notification to the Government recipients. This is a very important step – even if you successfully upload your proposal to AMRDEC SAFE, notification will not be sent to the Government until you verify your email address, which may result in the rejection of your proposal for lateness. Follow the instructions on the AMRDEC website and confirmation emails you receive from AMRDEC.

Proposal due Date and Time:

Request For Proposal No: W912PM-18-R-0004

Due Date of Proposal: 8 May 2018

Time by which Proposals are due: 2:00 P.M. (Eastern Time)

Title of Project: PN79439 SOF Advanced Skills Training Facility Fort Bragg, NC

The date and time of delivery will be established by the time of receipt of the email notification to the Contract Specialist and Contracting Officer by the AMRDEC SAFE website, not by the date and time of uploading of the proposal into the AMRDEC SAFE website. Do not assume that electronic communication is instantaneous – in fact, it can take several minutes or even hours in some cases. Please make allowances for delays in transmittal. If an electronic submission is uploaded minutes before the deadline but notification is not actually received in the recipients’ email inboxes until after the deadline, the submission will be considered late. The Government will not be responsible for proposals delivered to any location or to anyone other than those designated to receive proposals on its behalf. Offerors are responsible for ensuring that proposals are submitted so as to reach the designated recipient of proposals. Offerors are responsible for allowing sufficient time for the proposal to be received in accordance with the instructions provided.

3.5 The contractor is responsible for including sufficient details in its proposal to permit a complete and accurate evaluation. Accordingly, the Contractor shall be clear and concise in its proposal. The Government will not make assumptions concerning the Contractor’s intent.

3.6 The technical data criteria specified for each factor identified herein and as described in these instructions shall be submitted as part of the proposal. Failure to submit all the data required by the RFP, and these instructions may be cause for determining a proposal incomplete and, therefore, not considered for award.

3.7 Do not include exceptions to the terms and conditions of the solicitation in either the technical or price proposal. Should the offer include any standard company terms and conditions that conflict with the terms and conditions of the solicitation, the offer may be determined

“unacceptable” and thus ineligible for award. Should the offeror have any questions related to specific terms and conditions, these should be resolved prior to the submission of the offer.

3.8 Tabs. Proposal shall be organized and tabbed as follows:

mailto:john.t.hill@usace.army.mil

3.8.1 VOLUME I: Offerors Certifications, Factors 1 & 5 Small Business Participation Plan and Price

One (1) electronic copy Adobe PDF file as tabbed per the table below shall be submitted and one

(1) original copy of the bid guarantee in both electronic and hardcopy shall be submitted.

TAB Table of Contents of Offerors Certifications, Factors 1 & 5 Small

Business Participation Plan and Price

A The Proposal Cover Sheet

B Standard Form 1442

C Acknowledgement of Amendments (If Applicable)

D Factor 1: Price

E Attachment 6 – Audio Visual Equipment Pricing Worksheet

F

F

F

A u d i o v i s u a l

F

Section 00 45 00 – Representations and Certifications

G Teaming Arrangement (If Applicable)

H Bid Guarantee (Bid Bond)

I Financial Information and Bonding Capability

J Factor 5: Small Business Participation Plan

K Subcontracting Plan (FOR LARGE BUSINESSES ONLY)

TAB A – The proposal cover sheet is required by FAR 52.215-1 (c) (2) and must be submitted by all offerors. The format for the proposal cover sheet is as follows:

PROPOSAL COVER SHEET

1. The solicitation number;

2. The name, address, and telephone and facsimile numbers of the offeror (and electronic address if available);

3. A statement specifying the extent of agreement with all terms, conditions, and provisions included in the solicitation and agreement to furnish any or all items upon which prices are offered at the price set opposite each item;

4. Names, titles, and telephone and facsimile numbers (and electronic addresses if available) of persons authorized to negotiate on the offeror’s behalf with the Government in connection with this solicitation; and

5. Name, title, and signature of person authorized to sign the proposal. Proposals signed by an agent shall be accompanied by evidence of that agent’s authority, unless that evidence has been previously furnished to the issuing office.

See Attachment 1 provided at the end of this section. Offerors should ensure telephone number; fax number, e-mail address, DUNS number and CAGE Code are all included.

DUNS number will be used to access Contractor Performance Assessment Reporting

System (CPARS) data. Offerors should also provide any other assigned number that identifies them in the CPARS database. If a separate DUNS has been created for a joint venture (J-V) it must be submitted. A DUNS number shall also be provided for each company identified in any other proposed association of firms or Contractor Team

Arrangement. The offeror should also submit their Tax ID number on the proposal data sheet

TAB B - Standard Form 1442, completed and signed by authorized individual(s) of the offeror. Offers submitted in the name of a Joint Venture must be signed in accordance with the terms and conditions specified in the joint venture agreement as evidenced in the proposal.

TAB C - If applicable - All amendments must be acknowledged by all offerors and duly executed with an original signature by an official authorized to bind the company in accordance with FAR 4.102.

TAB D – Factor 1 - Price. Proposed price schedule is to be completed in its entirety by all offerors to include the Subtotals and Totals section as found in Section 00 10 00 -

Solicitation, Contract Line Item Number (CLIN) Schedule.

TAB E – Attachment 6 – Audio Visual Equipment Pricing Worksheet. Offerors are to complete and submit the attached worksheet in order to accuratelty and appropriately account for the individual AV systems as required by the plans and specifications. Offerors shall include this worksheet in TAB E of their submission.

TAB F - Section 00 45 00 – Representations and Certifications. Offerors shall include any narratives as it pertains to the requirement at 2.2 to document any teaming arrangement the offeror has or will enter into.

TAB G - Teaming Agreement, if applicable. See paragraph 2.1 and 2.2 Note to 8(a)—SBA must approve a joint venture agreement prior to the award of an 8(a) contract on behalf of the joint venture.

TAB H - Offerors shall provide a fully executed Bid Bond as required by FAR Clause

52.228-1, Bid Guarantee in both Hard copy and electronically in Tab H.

For purposes of this Request for Proposal, if the offeror represents the combining of two or more companies in a Contract Team Arrangement as defined in paragraph 2.1 above please note that in accordance with (IAW) FAR 28.001 Definitions:

“Bond means a written instrument executed by a bidder or contractor (the “principal”), and a second party (the “surety” or “sureties”) (except as provided in 28.204), to assure fulfillment of the principal’s obligations to a third party (the “obligee” or “Government”), identified in the bond. If the principal’s obligations are not met, the bond assures payment, to the extent stipulated, of any loss sustained by the obligee.”

Bonds shall therefore be executed in the name of the legal entity, whether a joint venture, partnership or the Prime Contractor with whom the government would enter into a contract for a successful offeror. The entity named on the bond must be able to acquire bonding capacity on its own merits, and not as the result of indemnification from a subcontractor or third party.

TAB I - Financial Information & Bonding Capability (e.g. past three years financial statements, annual reports, Dun & Bradstreet Ratings and/or number, etc.) Provide a list of all current contracts held, total dollar value, award date, anticipated completion, performance and payment bond amount.

TAB J - Factor 5- Small Business Participation Plan. Further Description and information of

TAB I, Factor 5 can be found in the subsequent paragraph 8 of this section, entitled the

GENERALPROPOSAL SUBMISSION INSTRUCTIONS & REQUIREMENTS

TAB K - Subcontracting Plan – FOR LARGE BUSINESS OFFERORS ONLY.

Subcontracting Plan shall be prepared in accordance with FAR 52.219-9, and SBA’s

Electronic Subcontracting Reporting System (eSRS) located at http://esrs.gov. Instructions for completion of requisite forms, as well as guidance on coordinating and preparing for all compliance reviews by Federal agencies can be found at this website. Offerors are to ensure subcontractors agree to submit to ESRS.

3.8.2 VOLUME II: Technical Proposal (Factors 2-4)

One (1) electronic copy Adobe PDF file as tabbed per the table below shall be submitted.

TAB Table of Contents of Technical Proposal (Factors 2-4)

A Factor 2: Corporate Relevant Specialized Experience

B Factor 3: Past Performance

C Factor 4: Key Personnel

3.8.3 Further Description of TABs A through C and further information of Factors 2, 3 & 4 can be found in the subsequent sections (paragraphs 4-6) of this section entitled the GENERAL

PROPOSAL SUBMISSION INSTRUCTIONS & REQUIREMENTS

4. TAB A—FACTOR 2 – CORPORATE RELEVANT SPECIALIZED EXPERIENCE.

4.1 SUBMISSION REQUIREMENTS:

4.1.1 The offeror shall demonstrate recent, relevant experience as the prime contractor on projects using Attachment 2 at the end of this section. Offerors may identify state and local government and private contracts that are similar to the Government’s requirements. If any firm has multiple functions or divisions, limit the project examples to those performed by the division, unit or team member submitting the offer.

4.1.2 Projects must be deemed relevant to be considered for this procurement. Relevant projects are those projects which meet all of the minimum criteria specified in paragraph 4.1.2.1. The

Government will not consider multiple projects such as individual task orders combined to meet the criteria referenced in 4.1.2.1 below. Projects which do not meet all of the minimum criteria specified shall be deemed not relevant and shall not be considered further. Relevant projects which meet some or all of the additional criteria specified in paragraph 4.1.2.2 may be given more weight by the Government in determining the appropriate rating.

4.1.2.1 Minimum Criteria:

4.1.2.1.1 Projects submitted by the offeror shall be projects where the offeror was the prime contractor.

4.1.2.1.2 Projects submitted by the offeror shall have a new construction and/or renovation value of no less than $15M.

Note: If the project is a combination of new construction and renovation, the value of the new construction and the value of the renovation work must total no less than $15M.

4.1.2.1.3 Projects shall have been successfully completed, or substantially completed (at least

50% construction progress completed) within six (6) years preceding the date of this Solicitation.

4.1.2.1.4 A minimum of two projects submitted shall include construction of a Sensitive

Compartment Information Facility (SCIF) area within the building.

4.1.2.1.5 Projects shall involve vertical construction or renovation or combination of both types of work of at least 30,000 square feet of gross space.

4.1.2.2 Additional Criteria:

4.1.2.2.1 Projects may include new construction, renovation or improvements of multiple story buildings.

4.1.2.2.2 Projects may include construction of a facility within high security-controlled area. A high security control area is defined as an area requiring armed security guard escort at all times, perimeter intrusion detection or access control measures (into the actual project site), and contractor personnel require identification badges and are subject to random searches of vehicles, equipment and personnel (by users special security).

4.1.2.2.3 Projects may include construction of a facility within an area that requires advanced site access coordination for all contractor personnel.

4.1.2.2.4 Projects may include new construction of 50,000 square feet of gross space or greater.

4.1.2.2.5 Proposals may include where the Sensitive Compartment Information Facility (SCIF) construction was performed at ICD 705 Standards.

4.1.2.2.6 Projects may include construction of a Sensitive Compartment Information Facility

(SCIF) where the entire facility is a SCIF.

4.1.2.2.7 Projects may include construction of consolidated administrative offices, operational and planning areas.

4.1.3 Offerors shall submit no fewer than three (3) and no more than five (5) Project Information

Sheets. For a project awarded as a task order or delivery order under an IDIQ type contract, offerors are cautioned to only submit information considered that is relevant to the specific requirements of this RFP. All projects shall be successfully completed, or substantially completed (fully designed and at least 50% construction progress completed) within six (6) years preceding the date of this Solicitation. At a minimum, Project Information Sheets shall provide all specific information that demonstrates compliance with the minimum criteria outlined in paragraph 4.1.2.1, as well as: the Project Point of Contact with telephone number, role and function performed on project, significance of role to overall project, project description (title), scope, location, cost (of specific contract action), and date of completion or anticipated completion date and percent constructed as of the date of the solicitation. Individual Project

Information Sheets shall not exceed five (5) pages.

4.1.4 The experience of individuals will not be evaluated under this factor.

4.1.5 If the offeror is a Joint Venture (J-V), relev.ant project experience should be submitted for projects completed by the Joint Venture entity, or the individual firms that make up the joint venture. Offerors that are part of the DoD Mentor Protégé program may only submit two

(2) recent and relevant project completed by the Mentor. Offerors are still limited to a total of five (5) projects. Experience of proposed subcontractors to be utilized on this project will not be considered.

4.2 EVALUATION CRITERIA:

4.2.1 The Government will evaluate the extent of recent, relevant experience of the prime contractor as identified in paragraph 4.1.2. Projects that were awarded on an individual task/delivery order basis will not be aggregated for purposes of meeting minimum or additional criteria. Federal Government project experience will not be rated inherently more important than non-Federal Government project experience.

4.2.2 To be considered eligible for award, the Government will verify that each offeror has submitted a minimum of three (3) projects which meet the minimum criteria of paragraph

4.1.2.1. The offeror’s Corporate Relevant Specialized Experience will be evaluated based on the

Government’s assessment of each submitted project’s similarity (in terms of size, scope and complexity) to the work described in this RFP.

4.2.3 The Government intends to give greater consideration to proposals that demonstrate experience with the additional criteria listed in paragraph 4.1.2.2 when assigning evaluation standards in accordance with paragraphs 8.1 through 8.4.

4.2.4 The Government reserves the right to verify the experience record of cited projects or other recent projects by reviewing the Contractor Performance Assessment Reporting System

(CPARS), Past Performance Information Retrieval System (PPIRS), other DOD or Government appraisal systems or by contacting owners or references. The Government may check any or all cited references, or available uncited references, to verify supplied information.

4.2.5 The relevant experience of key personnel proposed for this project will not be evaluated or considered under this factor.

4.2.6 If the offeror is determined to have insufficient recent, relevant experience in accordance with the submission requirements of this RFP, the offeror will be considered ineligible for award.

5. TAB B—FACTOR 3 - PAST PERFORMANCE.

5.1 SUBMISSION REQUIREMENTS:

5.1.1 Past performance refers to the quality of recent, relevant project experience from the owner’s perspective. The offeror shall complete and provide a NAVFAC/USACE Past

Performance Questionnaire (PPQ), see Attachment 3, on no fewer than three (3) and no more than five (5) projects. Projects submitted under this factor must first be deemed relevant in accordance with the minimum criteria specified in paragraph 4.1.2.1 and additional criteria in paragraph 4.1.2.2 before being evaluated for quality in accordance with the criteria specified in paragraph 5.3 and the evaluation standards set forth in paragraphs 8.2 and 8.3. It is at the offerors discretion if they would like NAVFAC/USACE PPQs completed by their previous clients to be completed and returned to them to be included in their submission or submitted electronically to the attention of both the Contract Specialist, Michael Mullen at michael.m.mullen@usace.army.mil and the Contracting Officer, John Hill, via email at john.t.hill@usace.army.mill

The offeror shall provide clear and adequate information in response to the past performance elements identified on Attachment 3 - NAVFAC/USACE PPQ. At a minimum, the PPQ must have at least the first page completed at time of submission. Though not required, ideally project past performance information submitted under this factor would be on the same projects submitted for consideration under Factor 3. Individual project NAVFAC/USACE PPQs shall not exceed Four (4) pages. Government evaluators will only review and evaluate the information contained on the first four pages. If any firm has multiple functions or divisions, limit the project examples to those performed by the division, unit or team member submitting the offer. The

Government will call and confirm information provided by the offeror on the NAVFAC/USACE

PPQ with the points of contact, to the extent necessary to conduct a meaningful evaluation. The

Government reserves the right to interview other individuals if the point of contact is not available.

5.1.2 Other Sources. The Government may contact sources other than those provided by the offeror for information with respect to past performance. These other sources may include but are not limited to: Past Performance Information Retrieval System (PPIRS), Federal Awardee

Performance Integrity Information System (FAPIIS), other Government sources, and interviews with organizations, panel members knowledge or individuals familiar with the offeror’s performance.

5.1.3 The past performance of individuals will not be considered under this factor.

5.2 EVALUATION CRITERIA:

mailto:michael.m.mullen@usace.army.mil mailto:john.t.hill@usace.army.mill

5.2.1 The Government will evaluate the offeror's past performance using the sources available to it including but not limited to: the example projects identified by the offeror and submitted on the

NAVFAC/USACE PPQs and any additional information received from references, PPIRS or other sources. Offerors will be provided an opportunity to address any negative past performance information about which the offeror has not previously had an opportunity to respond if such information is determined to present an impact on the rating to be assessed.

5.2.2 The Government will consider past performance of the prime construction contractor. If a firm has multiple functions or divisions, the Government will only evaluate the past performance of the unit or division submitting the offer. Where the Government views an offeror’s role, or that of its team members, if any, as not significant or as not clearly defined, the Government reserves the right to view this lack of involvement, or clarity, as a risk which may impact an offeror’s rating for this factor despite the quality of recent, relevant past performance information.

5.2.3 The Government will consider recent, relevant projects that are successfully completed, or substantially completed (fully designed and at least 50% construction progress completed) within six (6) years preceding the date of the solicitation. To be deemed relevant, projects must comply with minimum criteria in paragraph 4.1.2.1. The Government will consider the recency and relevance of the information, source of the information, context of the data, and general trends in contractor performance. The Government places higher value on projects for which successful performance can be validated by independent telephone interviews with points of contact identified in the proposal, PPIRS or other agency performance databases, offeror furnished references or personal knowledge. The Government places a higher value on projects which provided particularly difficult or unique challenges and the innovative methods the offeror used to resolve problems successfully.

5.3 The Government will evaluate recent, relevant past performance (as set forth in paragraph

8.2) based on the elements listed below to assign a confidence rating in accordance with paragraph 8.3:

5.3.1 Quality of Construction. The Government will evaluate all information available with respect to the quality of the actual construction undertaken and the standards of workmanship exhibited by the offeror.

5.3.2 Timeliness of Performance. The Government will evaluate all information available with respect to the completion of projects within the scheduled completion times.

5.3.3 Customer Satisfaction. The Government will evaluate all information available with respect to customer satisfaction, cooperation with customers, and interaction on past projects.

5.3.4 Management. The Government will evaluate all information available with respect to effective management of subcontractors, suppliers and labor on past projects.

5.3.5 Cost. The Government will evaluate all information available with respect to the contractor’s ability to perform within the contractually agreed price.

5.3.6 Safety. The Government will evaluate all information available with respect to the contractor’s safety program or efforts.

5.3.7 General. The Government will evaluate all general information and comments provided by previous clients with respect to the contractor’s efforts.

5.4 In the case of an offeror without a record of relevant past performance or for whom information on past performance is not available, the offeror may not be evaluated favorably or unfavorably on past performance. In this case, the offeror’s past performance is unknown and assigned a performance confidence rating of “neutral.” Although the Government may not rate an offeror that lacks recent, relevant past performance favorably or unfavorably with regard to past performance, the Government may determine, that a “Substantial Confidence” or

“Satisfactory Confidence” past performance rating is worth more than a “Neutral Confidence” past performance rating.

6. TAB C —FACTOR 4 – KEY PERSONNEL.

6.1 SUBMISSION REQUIREMENTS:

6.1.1 Each offeror shall provide resumes for the following Key Personnel proposed for this contract. Resumes shall not exceed five (5) pages per person. The proposed position of each person shall be clearly stated at the beginning of the resume

6.1.1.1 Project Superintendent (or Project Foreman)

6.1.1.2 Contractor’s Quality Control System Manager (CQC)

6.1.1.3 A sample suggested resume format is included with this RFP (Attachment 4). If offerors elect not to use the suggested resume format, all information identified on the sample format is still required for each resume submitted under this Factor. Proposals that fail to include resumes or that fail to include all required information on these resumes may be rejected as unacceptable

6.1.2 The Key Personnel identified must be used on the project.