W912MM-17-T-0076-0001_Amend_CSMS_1&2_Hydraulic_Tail_Trailers.pdf

W5BM2J71379008

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of Amendment 0001 is to correct the model number and clarify the specifications. Evaluation Clause 52.212-2 is updated to require quote to include a signed copy of the Solicitation SF1449, pages 1-3, and Amendment 0001, page 1.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 4

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 13-Sep-2017

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X W912MM-17-T-0076

X 9B. DATED (SEE ITEM 11)

12-Sep-2017

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

13-Sep-2017

CODE

W912MM - USPFO FOR SOUTH DAKOTA

ATTN: TIM ANDERSH

EMAIL: TIMOTHY.W.ANDERSH.CIV@MAIL.MIL

2823 WEST MAIN - BLDG 420

RAPID CITY SD 57702-8170

W912MM 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

W912MM-17-T-0076

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 1449 - CONTINUATION SHEET

SUPPLIES OR SERVICES AND PRICES

Global Changes

CLIN 0010 -- CLIN 0020

The CLIN extended description has changed from:

Brand Name or Equal:TK80HT Advantage Series Hydraulic Trailer8 1/2' x 53'Model # 10833-80HT AdvSee Additional Information and Specifications/Salient Characteristics for additional requirements.

To:

Brand Name or Equal:TK110HT Advantage Series Hydraulic Trailer8 1/2' x 53'Model # 10833-110HT AdvSee Additional Information and Specifications/Salient Characteristics for additional requirements..

The following have been modified:

SPECS/SALIENT CHARACTERISTICS

Specification / Salient Characteristics

Brand Name or Equal to Trail King TK110HT Advantage Series Hydraulic Trail Trailer, Model # 10833- TK110HT Adv

Trailer quoted shall meet a standard quality equal to or better than the Trail King TK110HT Advantage Series Hydraulic Trail Trailer, Model # 10833-110HT Adv. For referenced trailer standard of quality and specs go to www.trailking.com and select Trailers > Open Deck Construction > Advantage Hydraulic Tail. Item descriptions and manufacturer brand/model reference information provided for the requested trailers are provided to identify a desired standard of performance and quality. A standard level of quality would be comparable to the description.

This reference shall not be construed as limiting competition. Items quoted must be equal to or better than what’s identified. Please provide product descriptive literature/information or a website for any quoted items.

Sellers shall quote only items that meet all of the salient physical, functional, or performance characteristics specified by this solicitation. Sellers MUST identify exactly what they are quoting (including make, model and description) and address each item in the specifications below in their quote in order for the quote to be considered.

The Buyer will evaluate items on the basis of information furnished by the Seller or identified in the quote and reasonably available to the Buyer. The Buyer is not responsible for locating or obtaining any information not identified in the quote.

Air System - With tractor mating glad hands.

Axles - Air ride suspension with triple axles Color - Black in color with DOT approved markings.

Deck Main: Fully loaded 38.5 inch maximum height.

Deck Upper - Gooseneck with 8 foot hydraulic recessed ramp to allow loading to the upper deck.

Upper deck approximately 10’ to allow mounting of self-contained hydraulic system under upper deck.

Electrical System - 24 v NATO and 12 v standard DOT electrical system.

Hydraulic System – Self-contained hydraulic system with easily assessable 20 hp minimum, electric key start, gas powered Honda engine.

Minimum of 2200 psi at 15 gallons per minute.

Mounted under the neck riser of the upper deck between the landing gear.

Controls to start the engine located on the driver’s side.

Must have sufficient hydraulic reservoir on the trailer for the hydraulic system.

Dual hydraulic controls.

King Pin - 16 inch king pin setting with 86 inch swing clearance to any position of the frame.

Standard SAE 2 inch king pin.

Unloaded fifth wheel height of truck is approximately 49”.

Landing Legs – Hydraulic operated with dual controls. Not to be wireless remote.

Length - Overall approximate but not to exceed length: 52 foot 11 inch length, including hydraulic tail but excluding fold-under rear deck tail section. Must be capable to haul 621B Scraper, D7H Dozer, Road Grader and other construction and artillery equipment. Must be capable to haul 3 HUMMV’s at one time.

Lowering switch – Located on both sides by hydraulic controls. (Release air to level trailer for loading/unloading).

Spare Tire - None Stake Pockets & Key Slots: located in trailer deck for tie downs, alternating stake pockets and key slots, every 24 inches along both sides of trailer.

Suspension - Air ride suspension with triple axles Tail - Hydraulic hinged tail capable of loading minimum of 20,000 lbs. from the ground, four feet behind the hinge on the main tail or raised to load from a dock up to 58” height without the use of ramps. Fold under hydraulic ramp as specified in tail length section.

Tail Length: 11 foot 10 inch minimum overall in loading position, with a minimum of 3 foot 10 inch fold under hydraulic ramp.

Tires - 255/70R x 22.5 tires, with 22.5 x 7.5 10 hole disc wheels.

Tool Box(s) - Located within the front of the upper deck.

Traction Aids – Located outside 28” on fold out, main tail, and last 3 ft. of main deck.

Transport Lock – Hydraulic actuated tail lock.

Tread Plate - 1/4“ four way traction tread plate over tires Warranty – Provide warranty coverage information.

Weight Capacity - Overall weight capacity: 100,000 lbs. distributed, 70,000 lbs. concentrated in any 10 foot section, with a 2-1 safety factor to cover shock loading or off road use at hwy speed of 60 mph Width - Overall width: 8 foot 6 inch width (without extensions) Winch - 20,000 lbs. winch mounted above king pin, with 65 foot of cable and wireless remote and recessed winch roller.

Wireless remote – 2 function wireless remote to operate the winch

52.212-2 EVALUATION--COMMERCIAL ITEMS (OCT 2014)

(a) The Government intends to award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. This requirement is for low price meeting specifications/salient characteristics and evaluation factors identified below.

(b) The following factors shall be used to evaluate offers:

1. Sellers shall quote only items that meet all of the salient physical, functional, or performance characteristics specified by this solicitation. Sellers MUST identify exactly what they are quoting (including make, model and description) and address each item in the specifications below in their quote in order for the quote to be considered.

The Buyer will evaluate items on the basis of information furnished by the Seller or identified in the quote and reasonably available to the Buyer. The Buyer is not responsible for locating or obtaining any information not identified in the quote.

2. Vendor must identify in their quote that pricing is valid through 13 Oct 2017.

3. Specify delivery time period after receipt of order.

4. The contracting officer may determine an offer noncompliant with the terms and conditions of the solicitation if the contractor does not provide the information requested, specifically:

aa. To be eligible for award, an offer must be brand/model or equal to, if other product is offered must provide required documentation to qualify it is equal to, conform to all required terms and conditions and include all information required. See Specification/Salient Characteristics section for requirements.

bb. Provide country of manufacture.

cc. Completed Provision 252.209-7999 Dev - Representation By Corporations Regarding An Unpaid Delinquent Tax Liability Or A Felony Conviction Under Any Federal Law

dd. DUNS Number, CAGE Code, Tax ID Number

ee. Include SF 1449, Pages 1-3. Complete blocks 17, 29 and 30 on page 1.

ff. Include SF30, Amendment, Page 1. Complete blocks 8 and 15.

(c) Evaluation process:

1. The Government intends to evaluate offers in rank order from lowest-priced to highest-priced.

2. The Government will review the low offer for completeness. Any offer not complete, the Government reserves the right to give consideration.

3. At that time, the Government will review eligibility requirement of the apparent awardee for responsibility.

4. Other offers will only be evaluated in case the next lowest-priced, acceptable offeror is unwilling/unable to enter into a contract with the Government.

(d) To be eligible for award, items quoted must be equal to or better than the specifications/salient characteristics identified in this solicitation. Required documentation must be provided to qualify item(s) quoted is compliant, conforms to all required terms and conditions and include all information required.

(e) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

(End of provision)

(End of Summary of Changes)