100__Shop_Equipment_spec.pdf

Eagle County Airport Gypsum, Colorado

CONTRACT NO. W90FYQ-09-D-0001-Z001

Furniture, Fixtures and Equipment

Shop Equipment

100% Design Submittal 2 April 2013

Colorado Army National Guard

New High-Altitude Army Aviation Training Site

National Guard Bureau Project No. 080062

FDYD2101 Shop Equipment (FF&E) Package Colorado Army National Guard 100% Design Submittal High Altitude Aviation Training Site Issued 2 April 2013 Eagle County Airport, Gypsum, CO

P a g e | 1

TABLE OF CONTENTS

DOCUMENT TITLE LOCATION

COVER SHEET

TABLE OF CONTENTS Page 1

GENERAL FF&E NOTES Page 2

EQUIPMENT SPECIFICATIONS Page 3

ITEM SPECIFICATIONS Page

EQUIPMENT FLOOR PLANS

Q223 ALSE

Revised Avionics/Electrical Arrangement

Q225 Aircraft Systems, Avionics/Electrical, Special Tools Repair Parts, Facility Maintenance

Q226 Maintenance Workbays

Q227 Maintenance Workbays

P a g e | 2

GENERAL FF&E NOTES

1. Product listings in the Shop Equipment (FF&E) Package reflect the design intent for the equipment specified for the Colorado Army National Guard (COARNG), High Altitude Army Air Training Site (HAATS). FF&E vendor shall be responsible to confirm all necessary components, parts, and quantities prior to the placement of an order on behalf of (COARNG). A preliminary meeting with (COARNG) is required to discuss security requirements, on site vendor safety requirements and any special requirements as they relate to this specific project.

2. The FF&E vendor shall coordinate shop equipment layout and installation with existing electrical, data, and HVAC controls as well as other building system devices. The FF&E vendor shall verify all existing device locations and provide products and layout that provides access to and/or connects to existing devices. Electrical and Telecommunications plans will be provided to the FF&E vendor for reference.

3. The FF&E vendor is responsible for all training required to familiarize the Government with the use of the products they procure for High Altitude Army Air Training (HAATS).

Instruction on the assembly and disassembly of shop equipment is required. Provide maintenance and care manuals for each item type provided organized in a binder for reference and deliver to Lieutenant Colonel on site at time of installation.

4. The FF&E vendor is responsible for verifying the dimensions in the field prior to final order placement.

5. The FF&E vendor is responsible for providing floor and wall protection within the facility while providing installation of equipment. If any damage to the facility occurs during delivery, the equipment supplier is responsible for repair at no additional cost to (COARNG) floors, carpet, walls and doors, etc.

6. The FF&E vendor must submit the required security and safety documents prior to installation of materials.

P a g e | 3

EQUIPMENT SPECIFICATIONS

1. WORKBENCHES

a. Basis of design are Industrial Workbenches and Technical Workbenches by Lista

International. Provide workbenches that match he item specification sheets.

b. All workbenches shall be heavy duty design and construction. Work surfaces shall support 1,000 lb. without damage to the work surface or components below the work surface.

c. Work surfaces:

i. Butcher Block shall be 1 ¾” hardwood with bullnose front edge.

ii. Stainless steel shall be heavy gauge SS fitted over top and sides of 1 13/16” thick wood core.

iii. Laminate shall cover top and sides of the core and have bullnose front.

iv. Static dissipative work surfaces shall have plastic laminate over top and sides over core, 1 9/16” thick with bullnose front edge. Electrical characteristic shall comply with EDS/ESD 34.1. Work surface shall include grounding bolt, 10 foot grounding cord and one megohm resister.

d. Drawers / Shelves / Compartments: The steel drawer shall be welded construction with a full width drawer handle and full width label holder. The wall heights for all drawers in system shall be equal on all four sides (full-height side-walls). Drawers shall include tracks and a carriage with ball bearings to extend 100% without sagging at full load. Drawer pan to be perforated to allow for attachment of partitions and dividers. Drawer front shall wrap under and be welded to the bottom of the drawer body for improved strength. In addition to the drawers complying with the above-mentioned specifications, they also must have recessed handles and a “one drawer open at a time” lockout feature. (When one drawer is opened, all others remain shut). All drawers/shelves/compartments shall be sized and fabricated by the manufacturer.

e. Drawer capacity shall be 440 lb. per drawer for 22 inch wide cabinets and 165 lb.

per drawer for 17 inch wide cabinets.

f. Locks: Each bench shall be keyed differently with the same key opening both cabinets. All locks shall open with the same master key. Locks shall have removable core.

g. Casters shall be 4”x2” non-marring swivel casters with brake (4 per bench – 2 per cabinet) – per bench capacity of 1400lbs

2. WIRE SHELVING

a. Basis of design is Metro Wire Shelving by InterMetro Industries Corporation.

b. Posts shall be 1 inch diameter by 74 inches high.

c. Shelf capacity shall be 800 lb. per shelf.

P a g e | 4

3. AVIONICS SHELVING

a. Basis of Design is Edsal HeviLoad Plus II Industrial Shelving.

b. Shelves shall be 18 gauge minimum thickness steel with 700 lb. capacity per shelf.

c. Shelves shall be adjustable on one inch centers.

d. Uprights shall be formed from 14 gauge minimum thickness steel, L-shape.

4. BULK SHELVING

a. Basis of design is Tennsco Bulk Shelving.

b. Shelf capacity shall be 2150 lb. per shelf minimum.

c. Shelf levels shall be adjustable on 2 inch increments.

d. Frames shall be welded.

e. Beams shall have beam hook connection.

f. Beams and frames shall be fabricated from 14 gauge steel minimum.

5. INSTALLATION

a. Provide turnkey installation of assembly, product placement, and alignment and anchoring of shelving. All power will be the responsibility of the owner to connect to a building power source. If a site visit is required to ascertain installation requirements a site visit may be requested. Project location is in a secure area and respective bidders shall be appropriately badged.

b. Provide any required handling equipment such as a forklift.

c. Clean-up work areas when complete. Collect and remove from site any packaging or dunnage materials

FDYD2101

Colorado Army National Guard Eagle County Airport, Gypsum, CO 100% FFE Shops Design Submittal

High Altitude Aviation Training Site Issued 2 April 2013

ITEM DESCRIPTION

AL1 ALSE Work Bench Quantity 3

Manufacturer: Lista Series: Industrial Workbench Product Number: custom work bench Size: 72" long x 30" deep x 35 1/4" work surface height Supports: one drawer cabinet w/ layouts MP0600-0501FA one door cabinet MP0600-0204D Work Surface 1 3/4 in thick butcher block w/ radius edge BTOP-72N Base heavy duty swivel casters CB-364ML/WBS 2 req'd Locks master keyed MA 2 req'd Stringer WBLS72/MP/MP IDL Mobile Application IDL/MB 5 req'd Color: bright blue Riser: none Electrical: none (receptacles on wall above)

Item Image refer to next page

Manufacturer and finish listed are intended to establish basis of design only and are not intended to limit selection from other manufacturers. Approved equals shall be allowed per Federal Contracting Procedures.

Item Specification Sheet

22 3/16" 564mm

MP0600-0204DMP0600-0501

BUTCHER BLOCK

TOP

72" 1829mm

30" 762mm

27 9/16" 700mm

35 1/2" 902mm

D

C

B

AA

B

C

D

1345678

8 7 6 5 4 3 2 1

1:16SCALE:

LISTA INTERNATIONAL CORP.

106 LOWLAND STREET

HOLLISTON, MA. 01746

DRAWN BY: DATE: 3/21/2013

JSS-04097-1B1DWG. NO.

QUOTE #04097-

CONG

WB1500-BTS7230

ALSE WORKBENCH EQ# AL1

THIS DRAWING IS THE PROPERTY OF LISTA INTERNATIONAL CORPORATION

THIS PRINT AND/OR ACCOMPANYING PROPOSAL IS ISSUED ONLY TO THE COMPANY WHOSE NAME APPEARS THEREON, AND IS TO BE RETAINED IN STRICT CONFIDENCE NEITHER TO BE DUPLICATED NOR EXHIBITED

EXCEPT IN CONNECTION WITH THE USE OF LISTA INTERNATIONAL CORP. STORAGE EQUIPMENT

JMC

Eagle County Airport, Gypsum, CO 100% FFE Shops Design Submittal

High Altitude Aviation Training Site Issued 2 April 2013

ITEM DESCRIPTION

AL2 ALSE Soldering Bench quantity 1

Manufacturer: Lista Series: Industrial Workbench Product Number: custom work bench Size: 72" long x 30" deep x 35 1/4" work surface height Supports: one drawer cabinet w/ layouts MP0600-0501FA one door cabinet MP0600-0204D Work Surface 1 3/4 in thick butcher block w/ radius edge BTOP-72N Base heavy duty swivel casters CB-364ML/WBS 2 req'd Locks master keyed MA 2 req'd Stringer WBLS72/MP/MP IDL Mobile Application IDL/MB 5 req'd Color: bright blue Riser: instrument riser support w/ 20 amp circuit IRSS16/GF-20 instrument riser support IRSS16 Electrical: in vertical riser Shelf butcher block BS7212 Backstop 3 inches above work surface WBTBS-72 2 req'd End Stops one pair, 3 inches above work surface WBTES-28

Item Image refer to next page

Manufacturer and finish listed are intended to establish basis of design only and are not intended to limit selection from other manufacturers. Approved equals shall be allowed per Federal Contracting Procedures.

16" 406mm

POWER RISER

MP0600-0501 MP0600-0204D

BACK STOP

BACK STOP

4" CASTERS

BUTCHER BLOCK

TOP

901mm

17 1/4" 438mm

12" 305mm

END STOPS

C

B

AA

B

C

D

1345678

8 7 6 5 4 3 2 1

1:16SCALE:

LISTA INTERNATIONAL CORP.

106 LOWLAND STREET

HOLLISTON, MA. 01746

DRAWN BY: DATE: 3/21/2013

JSS-04097-2B1DWG. NO.

QUOTE #04097-

CONG

MOBILE WORKBENCH 72X30

ALSE SOLDERING BENCH EQ#AL2

THIS DRAWING IS THE PROPERTY OF LISTA INTERNATIONAL CORPORATION

THIS PRINT AND/OR ACCOMPANYING PROPOSAL IS ISSUED ONLY TO THE COMPANY WHOSE NAME APPEARS THEREON, AND IS TO BE RETAINED IN STRICT CONFIDENCE NEITHER TO BE DUPLICATED NOR EXHIBITED

Eagle County Airport, Gypsum, CO 100% FFE Shops Design Submittal

High Altitude Aviation Training Site Issued 2 April 2013

ITEM DESCRIPTION

AL16 Rack, Survival Storage quantity 1 set

AL17 Rack, Snow Shoes quantity 1 set

Items combined for stability and efficiency Manufacturer: Metro Series: Super Erecta Wire Shelving Color: chrome Size: 15' overall length x 3' deep x 7' 2" high snowshoe rack 48" wide x 36" deep x 74" tall 6 shelves jacket rack 2 sections - ea 48" wide x 24" deep x 74" tall 4 shelves

2 hanger bars helmet rack 36" wide x 24" deep x 74" tall 4 shelves other components foot plates 8 minimum or as req'd dividers 18 clamps as req'd

Item Image refer also to the next page

Manufacturer and finish listed are intended to establish basis of design only and are not intended to limit selection from other manufacturers. Approved equals shall be allowed per Federal Contracting Procedures.

Eagle County Airport, Gypsum, CO 100% FFE Shops Design Submittal

High Altitude Aviation Training Site Issued 2 April 2013

ITEM DESCRIPTION

NV1 NVD Work Bench with riser shelf quantity 2

Manufacturer: Lista Series: Technical Electronic Workstation Product Number: custom work bench Size: 72" long x 30" deep x 35 1/4" work surface height Supports: one drawer cabinet w/ layouts NW0600-0402NA one drawer & door cabinet w/ layouts NW0600-0202NA Work Surface 1 3/4 in thick butcher block w/ radius edge BTOP-72N Base heavy duty swivel casters CB-364ML/WBS 2 req'd Locks master keyed MA 2 req'd Stringer WBLS72/NW/NW IDL Mobile Application IDL/MB 5 req'd Color: bright blue Riser: instrument riser support w/ 20 amp circuit IRSS16/GF-20 instrument riser support IRSS16 Electrical: in vertical riser Shelf butcher block BS7212 Backstop 3 inches above work surface WBTBS-72 2 req'd

Item Image refer to next page

Manufacturer and finish listed are intended to establish basis of design only and are not intended to limit selection from other manufacturers. Approved equals shall be allowed per Federal Contracting Procedures.

16 7/8" 428mm

NW0600-0402 NW0600-0202

BACK STOP

BACK STOP

4" CASTERS

TOP

D

C

B

AA

B

C

D

1345678

8 7 6 5 4 3 2 1

1:16SCALE:

LISTA INTERNATIONAL CORP.

106 LOWLAND STREET

HOLLISTON, MA. 01746

DRAWN BY: DATE: 3/21/2013

JSS-04097-3B1DWG. NO.

QUOTE #04097-

CONG

MOBILE WORKBENCH 72X30

NVD WORKSTATION EQ#NV1

THIS DRAWING IS THE PROPERTY OF LISTA INTERNATIONAL CORPORATION

THIS PRINT AND/OR ACCOMPANYING PROPOSAL IS ISSUED ONLY TO THE COMPANY WHOSE NAME APPEARS THEREON, AND IS TO BE RETAINED IN STRICT CONFIDENCE NEITHER TO BE DUPLICATED NOR EXHIBITED

Eagle County Airport, Gypsum, CO 100% FFE Shops Design Submittal

High Altitude Aviation Training Site Issued 2 April 2013

ITEM DESCRIPTION

NV2 NVD Work Bench quantity 1

Manufacturer: Lista Series: Industrial Workbench Product Number: custom work bench Size: 72" long x 30" deep x 35 1/4" work surface height Supports: one drawer cabinet w/ layouts NW0600-0402NA one drawer & door cabinet w/ layouts NW0600-0202NA Work Surface heavy gauge stainless steel fitted over top & sides of 1 13/16" wood core LSSTOP-72N Base heavy duty swivel casters CB-364ML/WBS 2 req'd Locks master keyed MA 2 req'd Stringer WBLS72/NW/NW IDL Mobile Application IDL/MB 5 req'd Color: bright blue Riser: none Electrical: none (receptacles on wall above)

Item Image refer to next page

Manufacturer and finish listed are intended to establish basis of design only and are not intended to limit selection from other manufacturers. Approved equals shall be allowed per Federal Contracting Procedures.

NW0600-0402 NW0600-0202 4" CASTERS

STAINLESS STEEL

OVER WOOD TOP

35 5/16" 898mm

B

AA

B

C

D

1345678

8 7 6 5 4 3 2 1

1:16SCALE:

LISTA INTERNATIONAL CORP.

106 LOWLAND STREET

HOLLISTON, MA. 01746

DRAWN BY: DATE: 3/21/2013

JSS-04097-4B1DWG. NO.

QUOTE #04097-

CONG

MOBILE WORKBENCH 72X30

NVD WORKSTATION EQ#NV2

THIS DRAWING IS THE PROPERTY OF LISTA INTERNATIONAL CORPORATION

THIS PRINT AND/OR ACCOMPANYING PROPOSAL IS ISSUED ONLY TO THE COMPANY WHOSE NAME APPEARS THEREON, AND IS TO BE RETAINED IN STRICT CONFIDENCE NEITHER TO BE DUPLICATED NOR EXHIBITED

Eagle County Airport, Gypsum, CO 100% FFE Shops Design Submittal

High Altitude Aviation Training Site Issued 2 April 2013

ITEM DESCRIPTION

MH4 Hangar Mobile Work Bench quantity 8

Manufacturer: Lista Series: Industrial Workbench Product Number: custom work bec Size: 72" long x 30" deep x 40 1/8" work surface height Supports: two mobile legs

(swivel castors with wheel locks) WBLL/M38.5X28.5 Work Surface 1 3/4 in thick butcher block w/ radius edge BTOP-72N Stringer WBLST72/LL/LL Bottom Shelf 12" wide WBLBS72 Color: bright blue Riser: none Electrical: none

Item Image refer to next page

Manufacturer and finish listed are intended to establish basis of design only and are not intended to limit selection from other manufacturers. Approved equals shall be allowed per Federal Contracting Procedures.

6" CASTERS

STRINGER

40 1/8" 1019mm

B

AA

B

C

D

1345678

8 7 6 5 4 3 2 1

1:14SCALE:

LISTA INTERNATIONAL CORP.

106 LOWLAND STREET

HOLLISTON, MA. 01746

DRAWN BY: DATE: 4/1/2013

JSS-04097-5C1DWG. NO.

QUOTE #04097-

CONG

MOBILE WORKBENCH BTS72X30

HANGAR MOBILE BENCH EQ#MH4

THIS DRAWING IS THE PROPERTY OF LISTA INTERNATIONAL CORPORATION

THIS PRINT AND/OR ACCOMPANYING PROPOSAL IS ISSUED ONLY TO THE COMPANY WHOSE NAME APPEARS

THEREON, AND IS TO BE RETAINED IN STRICT CONFIDENCE NEITHER TO BE DUPLICATED NOR EXHIBITED

EXCEPT IN CONNECTION WITH THE USE OF LISTA INTERNATIONAL CORP. STORAGE EQUIPMENT

JMC

staackgf Cross-Out

Eagle County Airport, Gypsum, CO 100% FFE Shops Design Submittal

High Altitude Aviation Training Site Issued 2 April 2013

ITEM DESCRIPTION

AS9 Aircraft Systems Work Bench quantity 3

Manufacturer: Lista Series: Industrial Workbench Product Number: custom work bench Size: 72" long x 30" deep x 35 1/4" work surface height Supports: one drawer cabinet w/ layouts MP0600-0501FA one door cabinet MP0600-0204D Work Surface 1 3/4 in thick butcher block w/ radius edge BTOP-72N Base heavy duty swivel casters CB-364ML/WBS 2 req'd Locks master keyed MA 2 req'd Stringer WBLS72/MP/MP IDL Mobile Application IDL/MB 5 req'd Color: bright blue Riser: none Electrical: none (receptacles on wall above)

Item Image refer to next page

Manufacturer and finish listed are intended to establish basis of design only and are not intended to limit selection from other manufacturers. Approved equals shall be allowed per Federal Contracting Procedures.

TOP

B

AA

B

C

D

1345678

8 7 6 5 4 3 2 1

1:16SCALE:

LISTA INTERNATIONAL CORP.

106 LOWLAND STREET

HOLLISTON, MA. 01746

DRAWN BY: DATE: 3/21/2013

JSS-04097-6B1DWG. NO.

QUOTE #04097-

CONG

MOBILE WORKBENCH 72X30

AIRCRAFT SYSTEM EQ#AS9

THIS DRAWING IS THE PROPERTY OF LISTA INTERNATIONAL CORPORATION

THIS PRINT AND/OR ACCOMPANYING PROPOSAL IS ISSUED ONLY TO THE COMPANY WHOSE NAME APPEARS THEREON, AND IS TO BE RETAINED IN STRICT CONFIDENCE NEITHER TO BE DUPLICATED NOR EXHIBITED

Eagle County Airport, Gypsum, CO 100% FFE Shops Design Submittal

High Altitude Aviation Training Site Issued 2 April 2013

ITEM DESCRIPTION

AS18 Aircraft Systems Large Workbench quantity 1

Manufacturer: Lista Series: Workbench Product Number: custom work bench Size: 72" long x 36" deep x 35 1/4" work surface height Supports: one drawer cabinet w/ layouts MP0600-0501FA one door cabinet MP0600-0204D Work Surface heavy gauge stainless steel fitted over top & sides of 1 13/16" wood core LSSTOP-72X36 Base heavy duty swivel casters CB-364ML/WBS 2 req'd Locks master keyed MA 2 req'd Stringer WBLS72/MP/MP IDL Mobile Application IDL/MB 5 req'd Color: bright blue Riser: none Electrical: none (receptacles on wall above)

Item Image

Manufacturer and finish listed are intended to establish basis of design only and are not intended to limit selection from other manufacturers. Approved equals shall be allowed per Federal Contracting Procedures.

MP0600-0501MP0600-0204D

STAINLESS STEEL TOP

36" 914mm

27 3/8" 695mm

35 9/16" 904mm

B

AA

B

C

D

1345678

8 7 6 5 4 3 2 1

1:16SCALE:

LISTA INTERNATIONAL CORP.

106 LOWLAND STREET

HOLLISTON, MA. 01746

DRAWN BY: DATE: 3/21/2013

JSS-04097-7B1DWG. NO.

QUOTE #04097-

CONG

MOBILE WORKBENCH 72X36

AIRCRAFT SYSTEM EQ#AS18

THIS DRAWING IS THE PROPERTY OF LISTA INTERNATIONAL CORPORATION

THIS PRINT AND/OR ACCOMPANYING PROPOSAL IS ISSUED ONLY TO THE COMPANY WHOSE NAME APPEARS THEREON, AND IS TO BE RETAINED IN STRICT CONFIDENCE NEITHER TO BE DUPLICATED NOR EXHIBITED

Eagle County Airport, Gypsum, CO 100% FFE Shops Design Submittal

High Altitude Aviation Training Site Issued 2 April 2013

ITEM DESCRIPTION

AS25 NDI Work Bench quantity 1

Manufacturer: Lista Series: Industrial Workbench Product Number: custom work bench Size: 72" long x 30" deep x 35 1/4" work surface height Supports: one drawer cabinet w/ layouts MP0600-0501FA one door cabinet MP0600-0204D Work Surface plastic laminate over 1 9/16" wood core color Dove Gray, radius edge PTOP-72N Base heavy duty swivel casters CB-364ML/WBS 2 req'd Locks master keyed MA 2 req'd Stringer WBLS72/MP/MP IDL Mobile Application IDL/MB 5 req'd Color: bright blue Riser: none Electrical: none (receptacles on wall above)

Item Image refer to next page

Manufacturer and finish listed are intended to establish basis of design only and are not intended to limit selection from other manufacturers. Approved equals shall be allowed per Federal Contracting Procedures.

PLASTIC LAM

D

C

B

AA

B

C

D

1345678

8 7 6 5 4 3 2 1

1:16SCALE:

LISTA INTERNATIONAL CORP.

106 LOWLAND STREET

HOLLISTON, MA. 01746

DRAWN BY: DATE: 3/21/2013

JSS-04097-8B1DWG. NO.

QUOTE #04097-

CONG

MOBILE WORKBENCH 72X30

NDI WORKBENCH EQ#AS28

THIS DRAWING IS THE PROPERTY OF LISTA INTERNATIONAL CORPORATION

THIS PRINT AND/OR ACCOMPANYING PROPOSAL IS ISSUED ONLY TO THE COMPANY WHOSE NAME APPEARS THEREON, AND IS TO BE RETAINED IN STRICT CONFIDENCE NEITHER TO BE DUPLICATED NOR EXHIBITED

Eagle County Airport, Gypsum, CO 100% FFE Shops Design Submittal

High Altitude Aviation Training Site Issued 2 April 2013

ITEM DESCRIPTION

AV1 Avionics/Electrical Work Bench quantity 4

Manufacturer: Lista Series: Technical Workbench Product Number: custom work bench Size: 72" long x 30" deep x 35 1/4" work surface height Supports: one drawer cabinet w/ layouts NW0600-0402NA one drawer & door cabinet w/ layouts NW0600-0202NA Work Surface static dissipative, radius edge SDTOP-72BN Base heavy duty swivel casters CB-364ML/WBS 2 req'd Locks master keyed MA 2 req'd Stringer WBLS72/NW/NW IDL Mobile Application IDL/MB 5 req'd Color: bright blue Riser: instrument riser support w/ 20 amp circuit IRSS16/GF-20 2 req'd

Electrical: in vertical risers Shelf static dissipative SD7212 Backstop 3 inches above work surface WBTBS-72 2 req'd ESD Isolation Kit ESDISO-KIT?IRSS Light 48" long undershelf tasklight FLF-48/UCF

Item Image refer to next page

Manufacturer and finish listed are intended to establish basis of design only and are not intended to limit selection from other manufacturers. Approved equals shall be allowed per Federal Contracting Procedures.

20" 508mm

NW0600-0402 NW0600-0202

BACK STOP

BACK STOP

4" CASTERS

TASK LIGHT

27 3/8" 695mm

21 1/4" 540mm

DISSIPATIVE

DISSIPATIVE

TOP

D

C

B

AA

B

C

D

1345678

8 7 6 5 4 3 2 1

1:16SCALE:

LISTA INTERNATIONAL CORP.

106 LOWLAND STREET

HOLLISTON, MA. 01746

DRAWN BY: DATE: 3/21/2013

JSS-04097-9B1DWG. NO.

QUOTE #04097-

CONG

MOBILE WORKBENCH 72X30

AVIONICS/ELECTRICAL EQ# AKL1

THIS DRAWING IS THE PROPERTY OF LISTA INTERNATIONAL CORPORATION

THIS PRINT AND/OR ACCOMPANYING PROPOSAL IS ISSUED ONLY TO THE COMPANY WHOSE NAME APPEARS THEREON, AND IS TO BE RETAINED IN STRICT CONFIDENCE NEITHER TO BE DUPLICATED NOR EXHIBITED

Eagle County Airport, Gypsum, CO 100% FFE Shops Design Submittal

High Altitude Aviation Training Site Issued 2 April 2013

ITEM DESCRIPTION

AV11 Avionics/Electrical Shelving quantity 2

Manufacturer: Edsal Series: Hevi-Load Plus II Industrial Shelving Product Number: 5276202 Size: 48" x 24" x 85" H Number of shelves 5 per section Material: steel Shelf capacity 700 lb (18 gauge)

Item Image

Manufacturer and finish listed are intended to establish basis of design only and are not intended to limit selection from other manufacturers. Approved equals shall be allowed per Federal Contracting Procedures.

Eagle County Airport, Gypsum, CO 100% FFE Shops Design Submittal

High Altitude Aviation Training Site Issued 2 April 2013

ITEM DESCRIPTION

RP2 Packing Table quantity 1

Manufacturer: Lista Series: Nexus Packing Bench Product Number: custom work bench Size: 72" long x 30" deep x 33 1/2" work surface height Supports: one drawer cabinet w/ layouts NW0600-0501NA one cabinet combination NW0600-0201N Work Surface 3/8" thick sanded, oil resistant pressed wood top and bottom wood core, total 1 3/4" thick LTOP-72 Base heavy duty swivel casters CB-364ML/WBS 2 req'd Locks master keyed MA 2 req'd Bottom Shelf packing bench shelf BS-7216/NW/NW IDL Mobile Application IDL/MB 7 req'd Riser: Nexus Packing Bench Combination NXC/SM48-PB01-60BB Wire Dividers NXZ/WD250-15 6 REQ'D Color: bright blue Electrical: none (receptacles on wall above)

Item Image refer to next page

Manufacturer and finish listed are intended to establish basis of design only and are not intended to limit selection from other manufacturers. Approved equals shall be allowed per Federal Contracting Procedures.

49 1/2" 1257mm

NW75N

NW75N

NW100N

NW150N

NW200N

NW300N

NW300N

BOTTOM SHELF

WIRE DIVIDERS

WIRE DIVIDERS

ADJ SHELF

ADJ SHELF

ROLL HOLDER

ROLL HOLDER

BACK STOP

LOUVERED PANEL

LISTA TOP

4" CASTERS

B

AA

B

C

D

1345678

8 7 6 5 4 3 2 1

1:14SCALE:

LISTA INTERNATIONAL CORP.

106 LOWLAND STREET

HOLLISTON, MA. 01746

DRAWN BY: DATE: 3/21/2013

JSS-04097-10B1DWG. NO.

QUOTE #04097-

CONG

MOBILE WORKBENCH 72X30

PACKING TABLE EQ# RP2

THIS DRAWING IS THE PROPERTY OF LISTA INTERNATIONAL CORPORATION

THIS PRINT AND/OR ACCOMPANYING PROPOSAL IS ISSUED ONLY TO THE COMPANY WHOSE NAME APPEARS THEREON, AND IS TO BE RETAINED IN STRICT CONFIDENCE NEITHER TO BE DUPLICATED NOR EXHIBITED

Eagle County Airport, Gypsum, CO 100% FFE Shops Design Submittal

High Altitude Aviation Training Site Issued 2 April 2013

ITEM DESCRIPTION

RP3 Heavy Duty Shelving quantity 13 starterunts

Manufacturer: Tennsco 22 add-ons Series: Bulk Racks 35 shelves Product Number: 3 shelf starter unit C&H 5838202

3 shelf add-on units C&H 5838302 extra shelves C&H 5839400

Size: 96" x 24" shelves x 96" high Material: steel rack with corrugated steel decking Capacity: 2150 lb per shelf Color: medium gray

Item Image generic image of starter unit and one add-on specified units have:

4 shelves each corrugated steel shelves 1, 2, or 4 add-ons

Manufacturer and finish listed are intended to establish basis of design only and are not intended to limit selection from other manufacturers. Approved equals shall be allowed per Federal Contracting Procedures.

Eagle County Airport, Gypsum, CO 100% FFE Shops Design Submittal

High Altitude Aviation Training Site Issued 2 April 2013

ITEM DESCRIPTION

FM1 Facility Maintenance Work Bench quantity 2

Manufacturer: Lista Series: Industrial Workbench Product Number: custom work bench Size: 72" long x 30" deep x 35 1/4" work surface height Supports: one drawer cabinet w/ layouts MP0600-0501FA one door cabinet MP0600-0204D Work Surface 1 3/4 in thick butcher block w/ radius edge BTOP-72N Base heavy duty swivel casters CB-364ML/WBS 2 req'd Locks master keyed MA 2 req'd Stringer WBLS72/MP/MP IDL Mobile Application IDL/MB 5 req'd Color: bright blue Riser: instrument riser support w/ 20 amp circuit IRSS16/GF-20 instrument riser support IRSS16 Electrical: in vertical riser Shelf butcher block BS7212 Backstop 3 inches above work surface WBTBS-72 2 req'd End Stops one pair, 3 inches above work surface WBTES-28

Manufacturer and finish listed are intended to establish basis of design only and are not intended to limit selection from other manufacturers. Approved equals shall be allowed per Federal Contracting Procedures.

BACK STOP

BACK STOP

4" CASTERS

BUTCHER BLOCK

TOP

END STOPS

C

B

AA

B

C

D

1345678

8 7 6 5 4 3 2 1

1:16SCALE:

LISTA INTERNATIONAL CORP.

106 LOWLAND STREET

HOLLISTON, MA. 01746

DRAWN BY: DATE: 3/21/2013

JSS-04097-11B1DWG. NO.

QUOTE #04097-

CONG

MOBILE WORKBENCH 72X30

FACILITY MAINT BENCH EQ# FM1

THIS DRAWING IS THE PROPERTY OF LISTA INTERNATIONAL CORPORATION

THIS PRINT AND/OR ACCOMPANYING PROPOSAL IS ISSUED ONLY TO THE COMPANY WHOSE NAME APPEARS THEREON, AND IS TO BE RETAINED IN STRICT CONFIDENCE NEITHER TO BE DUPLICATED NOR EXHIBITED