Statement_of_Work.pdf

VGLZ 162006 – Install Door – Hgr 7

SYNOPSIS

The contractor shall provide the materials, and labor to install a new insulated metal exterior personnel door, frame, threshold, and hardware to be located at the southwestern façade of Hangar 7 and a power motor system to open and close hangar doors located at the south eastern façade of Hangar 7. Include all associated plumbing, electrical, mechanical, and architectural to make this a complete and usable facility.

A new opening in an existing concrete masonry wall will be required and the construction of concrete masonry walls and 2 hour fire rated metal stud w/gyp board ceiling assembly to enclose passage way from concrete masonry opening to door opening in hangar door and shall be sealed with firestop.

Provide and install complete power system to include all ancillary equipment and materials. Design basis for system is Norco Universal Door Systems.

a. Demolition of old system.

b. Provide and install new power motor system.

c. Provide and install new cable Festoon System

d. Provide and install new open and Close Door Limit Switches

e. Provide and install new horn.

f. Provide and install new push button lockout for close button

g. Provide and install timers on both directions of hanger doors 7 seconds for horn to sound before movement.

The facility will be occupied during construction.

All work performed shall be conducted in accordance all applicable state and federal laws, regulations, and codes, ANG policies and regulations, MATOC Specifications unless otherwise noted in the

Statement of Objectives and Selfridge Base Standards.