A02 Description of Requirements_soil sample drill_R1.pdf

Description of Requirement

Soil Sample Drill Trailer

Background The Geotechnical and Structures Laboratory (GSL) of the US Army Engineer Research and Development Center (ERDC) has been tasked to develop a procedure to develop methods to characterize physical properties of the pavements at abandoned airfield sites in the Pacific and determine the viability of reopening the sites to support current and future mission requirements.

To accomplish this, GSL has the need to procure a geotechnical exploration drilling equipment to aid in sample collection for physical property testing.

Specifications

• Trailer mounted equipment o Capable to connecting with Class III trailer hitch with 2 in. ball on tow vehicle o Single axle with pneumatic tires o Welded steel frame o Adjustable leveling jack legs o Collapsible equipment design capable of shipping on shipping pallet or standard cargo shipping container.

o Spare tire included

• Auger style drilling operation o Capable of drilling minimum of 50 ft deep at 6 in. diameter with hollow drilling stem o Allows for drilling holes 3 to 8 in. in diameter o Hydraulic mast/piston stroke compatible with/capable of using standard 5 ft auger extension lengths plus any couplings required o Hydraulic operated equipment o Rotating/swivel drilling mast o Maximum drilling torque: 1,000 ft-lbs minimum o Maximum drill head force: 8,000 lb minimum, up and down o Gross weight without accessories: less than 2,100 lbs o Trailer towing/wiring package to operate break/turn lights

• Power requirements o Trailer is self powered by installed engine

22 hp minimum, measured by gross torque Diesel fuel powered Electric start Minimum Fuel tank capacity: 5 gal o Drill powered by hydraulic system by affixed engine Minimum operating pressure: 3,000 psi Minimum Oil reservoir capacity: 5 gal

• Allows for collection of standard penetration test (SPT) measurements by ASTM D1586 with split barrel sampler.

o Removeable/detachable cathead o Components provided to allow for operation of standard 140 lb drop/safety hammer o Manually operated drop hammer by rope with pulley on cathead

• Accessories o 44 ft of 6 in. solid stem auger flight

Pinned connection construction Lead sections

• 1 - auger with carbide fishtale point pilot bit and side mounted carbide cutting blade

• 1 - auger with carbide scraper blade

• 1 - auger with carbide fishtale point pilot bit and side mounted pengo style carbide cutting blade

• All lead sections have replaceable, bolt on point or blade components

• 48 in. long, but will consider other stock lengths less than 5 ft offered by manufacturer 10 - 4 ft auger extension 2 - 4 ft tube extensions Additional parts

• 6 – additional replacement auger pins

• 6 – replacement carbide scraper blade

• 6 – replacement side mounted carbide blade

• 12 – replacement side mounted pengo style carbide cutting blade with rubber locks

• 6 - replacement fishtale point pilot bits

• Replacement bits sized and compatible with lead/pilot augers described

• All required mounting bolts and nuts included o 44 ft of 8 in. hollow stem auger flight (outer diameter) Lead auger

• 3.75 in. inner diameter

• carbide blades and point tipped

• 4 ft long, but will consider other stock lengths less than 5 ft offered by manufacturer 10 - 4 ft auger extension Any additional accessories required to operate drill for STP testing

• Adaptor/cap to drill rod and drive head for auger

• Bottom plug plus components

• Drill rod for each auger flight, 4 ft pieces

• 6 - replacement carbide blades for cutter heads o 140 lb safety hammer for SPT testing o 2” x 24” split spoon sampler o 3” x 24” split spoon sampler o Anchoring kit supplied to allow for drilling operations past weight of trailer alone o Additional spare parts kit with common components that can be replaced in the field, (example: small bearings, pins, parts, etc. for commonly replaced maintenance components/parts for the machine). Spare parts and any hand tools supplied stored in a supplied tool box.

• Includes delivery/shipping as FOB Destination to Vicksburg, MS 39180

Delivery

• Delivery within 3 months after contract award.

• Ship to Technical POC at: 3909 Halls Ferry Road, Vicksburg, MS 39180