FTW392_Pool_Equipment_Warranty_Management_Plan.pdf

Eklutna Construction & Maintenance, LLC

Pool Treatment Equipment Warranty Management Plan

FTW 392 Melaven Pool Water Treatment Renovation

Fort Wainwright, Alaska Contract No. W911KB-16-C-0036

Prepared for:

Prepared by:

10950 Mausel Street, Unit B-1a

Eagle River, AK 99577

6/6/2017

TABLE OF CONTENTS

1.0 INTRODUCTION

2.0 Roles, Responsiblities and Responses

A. Contractor, Subcontractor and Engineers

B. Contractor Responsiblities per FAR 52.246-21 I Warranty of Construction

C. Contractor Response to Warranty Service Items

3.0 Warranty performance Period

A. 1 year warranty period

B. Post Construction Warranty Inspections

C. Extended Warranties

4.0 Warranty Cards

A. warranty Card Format

B. Tagging Procedure

APPENDIXES

A WARRANTY DATA SCHEDULE

B POSTED INSTRUCTIONS

C WARRANTY CARD DATA

1.0 INTRODUCTION

Eklutna Construction & Maintenance, LLC (ECM) is the holder of Contract W911KB-16-C-0036 with the United States

Army Corps of Engineers (USACE). Under this contract, ECM will provide a construction warranty period of 1 year per FAR 52.246-21 I - Warranty of Construction.

2.0 ROLES, RESPONSIBLITIES AND RESPONSES

As the prime holder of Contract W911KB-16-C-0036, ECM will be the Owner’s contact during the construction warranty period for facilitation of warranty related items. In the event a warranty item arises, the Owner must initiate contact with ECM and provide all available information pertaining to the issue.

ECM will assess the information, determine the responsible subcontractor or supplier and engage them with information made available. Continued dialog is expected between ECM, subs/suppliers and the Owner to determine resolution of the issue.

CONTRACTOR, SUBCONTRACTOR AND ENGINEERS

The following firms participated in the execution of this contract and their contact information is

Team Member Co. & Contact Names Contact Information

Construction Management Engineer (CME)

Patricia Bowen United States Army Corps of Engineers (Fort Wainwright, Alaska)

CEPOA-CT PO BOX 6898 JBER

AK 99506-0898

(907) 361-3151 (office) patricia.bowen@usace.army.mil

General Contractor Eklutna Construction & Management, LLC John Conway

10950 Mausel Street Unit B-1A Eagle River AK 99577 Tel 907.696.3838 jconway@eklutnainc.com

Commissioning Authority Coffman Engineers Ezra Gutschow, PE, CxA

800 F. Street Anchorage, AK 99501 tel 907.276.6664 Mobile 907.231.4080 gutschow@coffman.com

Architect KPB Architects, Jeff Koonce, AIA 500 L Street Suite#400 Anchorage, AK 99501 Tel: 907.274.7443 JKoonce@KPBarchitects.com mailto:patricia.bowen@usace.army.mil mailto:patricia.bowen@usace.army.mil mailto:patricia.bowen@usace.army.mil mailto:patricia.bowen@usace.army.mil mailto:jconway@eklutnainc.com mailto:jconway@eklutnainc.com mailto:jconway@eklutnainc.com mailto:jconway@eklutnainc.com mailto:JKoonce@KPBarchitects.com mailto:JKoonce@KPBarchitects.com mailto:JKoonce@KPBarchitects.com mailto:JKoonce@KPBarchitects.com

Mechanical Designer/Eng. Coffman Engineers Brent Little, PE

800 F. Street Anchorage, AK 99501 tel 907.276.6664 little@coffman.com

Electrical Designer/Eng. Coffman Engineers Logan Haines, PE

800 F. Street Anchorage, AK 99501 tel 907.276.6664 haines@coffman.com

Mechanical Contractor Aaron Plumbing and Heating Tom Fisher, President

2143 Standard Ave.

Fairbanks, AK 99701

(907) 452-3463 tomfisher@aaronak.com

Piping Aaron Plumbing and Heating Tom Fisher, President

2143 Standard Ave.

Fairbanks, AK 99701

(907) 452-3463 tomfisher@aaronak.com

Sheet Metal Sun Air Sheetmetal Inc Glen Brady

3250 Easy St Fairbanks, AK 99701 907-456-8766

TAB Contractor Alaska Air Balancing, Inc.

Ronald Neffendorf, President

3060 Lazy Eight Court #10 Wasilla, AK 99654

(907) 373-1090 akair@mtaonline.net

Controls Contractor Siemens Greg Van't Land, PM

2520 Roland Rd, Fairbanks, AK 99709 gregory.vantland@siemens.com

(907) 479-7034

Electrical Contractor Fullford Electric, Inc.

Josh Coghill, PM

303 E Van Horn Rd, Fairbanks, AK 99701

(907) 456-7356 jcoghill@fullfordelectric.com

Pool Contractor (Natatorium Space)

Chester Pool Systems Inc.

Greg Carnforth, VP

5311 Foundation Blvd.

New Albany, Indiana 47150

(800) 248-5486 greg@chesterpools.com

Pool Contractor (Mechanical Room Space)

Aaron Plumbing and Heating Tom Fisher, President

2143 Standard Ave.

Fairbanks, AK 99701

(907) 452-3463 tomfisher@aaronak.com

CONTRACTOR RESPONSIBLITIES PER FAR 52.246-21 I WARRANTY OF CONSTRUCTION

WARRANTY OF CONSTRUCTION (APR 1984) ALTERNATE I

mailto:little@coffman.com mailto:little@coffman.com mailto:little@coffman.com mailto:little@coffman.com mailto:haines@coffman.com mailto:haines@coffman.com mailto:haines@coffman.com mailto:haines@coffman.com

(a) In addition to any other warranties in this contract, the Contractor warrants, except as provided in paragraph

(j) of this clause, that work performed under this contract conforms to the contract requirements and is free of any defect in equipment, material, or design furnished, or workmanship performed by the Contractor or any subcontractor or supplier at any tier.

(b) This warranty shall continue for a period of 1 year from the date of final acceptance of the work. If the

Government takes possession of any part of the work before final acceptance, this warranty shall continue for a period of 1 year from the date the Government takes possession.

(c) The Contractor shall remedy at the Contractor's expense any failure to conform, or any defect. In addition, the

Contractor shall remedy at the Contractor's expense any damage to Government-owned or controlled real or personal property, when that damage is the result of--

(1) The Contractor's failure to conform to contract requirements; or

(2) Any defect of equipment, material, workmanship, or design furnished.

(d) The Contractor shall restore any work damaged in fulfilling the terms and conditions of this clause. The

Contractor's warranty with respect to work repaired or replaced will run for 1 year from the date of repair or replacement.

(e) The Contracting Officer shall notify the Contractor, in writing, within a reasonable time after the discovery of any failure, defect, or damage.

(f) If the Contractor fails to remedy any failure, defect, or damage within a reasonable time after receipt of notice, the Government shall have the right to replace, repair, or otherwise remedy the failure, defect, or damage at the

Contractor's expense.

(g) With respect to all warranties, express or implied, from subcontractors, manufacturers, or suppliers for work performed and materials furnished under this contract, the Contractor shall--

(1) Obtain all warranties that would be given in normal commercial practice;

(2) Require all warranties to be executed, in writing, for the benefit of the Government, if directed by the

Contracting Officer; and

(3) Enforce all warranties for the benefit of the Government, if directed by the Contracting Officer.

(h) In the event the Contractor's warranty under paragraph (b) of this clause has expired, the Government may bring suit at its expense to enforce a subcontractor's, manufacturer's, or supplier's warranty.

(i) Unless a defect is caused by the negligence of the Contractor or subcontractor or supplier at any tier, the

Contractor shall not be liable for the repair of any defects of material or design furnished by the Government nor for the repair of any damage that results from any defect in Government-furnished material or design.

(j) This warranty shall not limit the Government's rights under the Inspection and Acceptance clause of this contract with respect to latent defects, gross mistakes, or fraud.

(k) Defects in design or manufacture of equipment specified by the Government on a 'brand name and model' basis, shall not be included in this warranty. In this event, the Contractor shall require any subcontractors, manufacturers, or suppliers thereof to execute their warranties, in writing, directly to the Government.

(End of clause)

(R 7-604.4 1976 JUL)

(AV 7-604.4(b) 1976 JUL)

CONTRACTOR RESPONSE TO WARRANTY SERVICE ITEMS

Per specification section 01 78 00 of this contract, warranty service items will be assigned the following priority codes:

Priority Code 1 - Perform onsite inspection to evaluate situation, and determine course of action within 4 hours, initiate work within 6 hours and work continuously to completion or relief.

Priority Code 2 - Perform onsite inspection to evaluate situation, and determine course of action within 8 hours, initiate work within 24 hours and work continuously to completion or relief.

Priority Code 3 - All other work to be initiated within 3 work days and work continuously to completion or relief.

The "Construction Warranty Service Priority List" is as follows:

Code 1-Life Safety Systems

Fire suppression systems.

Fire alarm system(s) in place in the building.

Code 1-Air Conditioning Systems

Recreational support.

Air conditioning leak in part of building, if causing damage.

Air conditioning system not cooling properly.

Code 1-Doors

Overhead doors not operational, causing a security, fire, or safety problem.

Interior, exterior personnel doors or hardware, not functioning properly, causing a security, fire, or safety problem.

Code 3-Doors

Overhead doors not operational.

Interior/exterior personnel doors or hardware not functioning properly.

Code 1-Electrical

Power failure (entire area or any building operational after 1600 hours).

Security lights

Smoke detectors

Code 2-Electrical

Power failure (no power to a room or part of building).

Receptacle and lights (in a room or part of building).

Code 3-Electrical Street lights.

Code 1-Gas

Leaks and breaks.

No gas to family housing unit or cantonment area.

Code 1-Heat

Area power failure affecting heat.

Heater in unit not working.

Code 2-Kitchen Equipment

Dishwasher not operating properly.

All other equipment hampering preparation of a meal.

Code 1-Plumbing

Hot water heater failure.

Leaking water supply pipes.

Code 2-Plumbing

Flush valves not operating properly.

Fixture drain, supply line to commode, or any water pipe leaking.

Commode leaking at base.

Code 3-Plumbing

Leaky faucets.

Code 3-Interior

Floors damaged.

Paint chipping or peeling.

Casework.

Code 1-Roof Leaks

Temporary repairs will be made where major damage to property is occurring.

Code 2-Roof Leaks

Where major damage to property is not occurring, check for location of leak during rain and complete repairs on a Code 2 basis.

Code 2-Water (Exterior)

No water to facility.

Code 2-Water (Hot)

No hot water in portion of building listed.

Code 3-All other work not listed above

3.0 WARRANTY PERFORMANCE PERIOD

Contract completion is scheduled for June 30, 2017. After this date, the Owner will take possession of the facility and the warranty period will begin.

1 YEAR WARRANTY PERIOD

The 1 year warranty period will begin July 1, 2017 and end July 1, 2018.

POST CONSTRUCTION WARRANTY INSPECTIONS

Post construction warranty inspections will be held during the warranty performance period. ECM will be responsible for scheduling the inspections and fielding any items that are found at the inspection. Two inspections will be held as follows:

4 Month Post Construction Inspection

This inspection is anticipated to be held November 1, 2017. ECM will coordinate meeting invites.

9 Month Post Construction Inspection

This inspection is anticipated to be held April 2, 2017. ECM will coordinate meeting invites.

EXTENDED WARRANTIES

Building Exterior Components

Metal wall panels installed under this contract are required to carry a 20 year “No Dollar Limit” warranty for labor and material. The warranty period is to be no less than twenty (20) years from the date of Government acceptance of the work. The warranty is to be issued directly to the Government.

Standing seam roofing installed under this contract is required to carry a 20 year “No Dollar Limit” warranty for labor and material. The installer is to furnish manufacturer's no-dollar-limit materials and workmanship warranty for the roofing system. The warranty period shall be not less than 20 years from the date of Government acceptance of the work. The warranty shall be issued directly to the Government.

Pool Treatment Equipment

Pool components will be covered with the following warranties:

1. Defects in material, workmanship, and installation of the pool piping system for a period of three (3) years.

2. Defects in material, workmanship, and installation of the pool pumps for a period of one (1) year.

3. Manufacturer's minimum five (5) year warranty against defective materials, components and workmanship in the pool chemical controller. ORP, pH, flow and temperature sensors shall be covered by a standard two (2) year warranty. All other sensors and flow cell components shall be covered by a standard one (1) year warranty.

4. Manufacturer's minimum eighteen (18) month warranty against defective materials, components and workmanship in the Variable Frequency Drive system effective the date of supply.

5. Defects in material, workmanship, and installation of the PVC pool liner membrane system shall be guaranteed for performance for a period of ten (10) years.

6. Manufacturer's minimum fifteen (15) year warranty on the filter tank and lining against defective materials or workmanship of the tank and components. The filter manufacturer shall bear the responsibility for suitability of lining and shall be the sole source for the specified warranty. Internal tube elements shall carry a fully rated 10-year warranty. Valve bodies and the RMF controller shall carry a 5 year fully rated warranty. Valve operators and system accessories including the bump tire, quick exhaust valve and solenoid valve shall carry one-year warranty as provided by the product manufacturer. Unless otherwise specified, workmanship is to be guaranteed first class and carry a one (1) year warranty.

7. Manufacturer's minimum one (1) year warranty against defective materials, components and workmanship in the sanitizing feed system.

8. Manufacturer's minimum one (1) year warranty against defective materials, components and workmanship in the pH buffer feed system.

9. Manufacturer's minimum one (1) year warranty against defective materials, components and workmanship in the ultraviolet sanitizing system (excluding the UV arc tube). UV arc tubes are warranted to operate for 4000 hours when operated continuously. A continuously operated UV arc tube that fails prior to 4000 hours of operation shall be replaced free of charge. Intermittently operated UV arc tubes (>1 on/off cycle per day) will be replaced free of charge if failure occur prior to 2000 hours and prorated between 2000 and 4000 hours.

Air Handling Units

Air Handling Units (HRV’s) will have a warranty valid for 2 years from government acceptance.

Electrical Components

Electric service meter will have a standard 4 year warranty.

LED Exit Lighting Fixtures will have a five year warranty.

4.0 WARRANTY CARDS

Warranty cards will be provided

WARRANTY CARD FORMAT

Warranty cards will be completed using the following format:

Identification Location Installed

Type of Product / Material Manufacturer Contact

Make & Model/Series

Serial Number

Contract Number

Warranty Period From: Supplier Contact

Warranty Period To:

Warranty Contact

Warranty Service Contact

Installing Contractor

Warranty Terms:

O&M Reference Typical Response Time & Repair Time:

Maintenance Procedures Required to Maintain Warranty:

Additional Information:

TAGGING PROCEDURE

Warranty cards will be printed and laminated for durability. Card will then be attached to respective equipment of placed in document holders inside items like electrical panels. Ball chain or other methods to permanently attach the tags to equipment will be used.

APPENDIX A

WARRANTY DATA SCHEDULE

WARRANTED EQUIPMENT

Pool Treatment Equipment

Item Name Model Serial Number Location Supplier Contact Information Spare Parts Contact Information Warranty Terms Warranty

Certificate

Warranty Start

Date

Maintenance Features to be

Done Warranty Service Point of Contact

Priority Code

Response Time

PP1 - Pool Reciculation Pump

720GPM

Aurora 341A-BE AS-17-40183

Mechanical Room, Basement Level

Associated Pool Builders, Inc. 2121 Lovett Avenue

Bismarck, ND 58504 - (701-712-3077)

Aurora Pump - Pentair Pump Group - 800 Airport

Road North Aurora, Illinois 60542 - (630-859-7000) 1 year from date of install / 18 month after shipment Yes 1-Jul-2017

Lubricate bearings every 2,000 hours or 4 months.

Eklutna Construction & Maintenance, LLC - 10950

Mausel Street Unit B1a Eagle River, AK 99577 - (907-

696-3838)

PP2 - Pool Reciculation Pump

720GPM

Aurora 341A-BE AS-17-40183

Mechanical Room, Basement Level

Associated Pool Builders, Inc. 2121 Lovett Avenue

Bismarck, ND 58504 - (701-712-3077)

Aurora Pump - Pentair Pump Group - 800 Airport

Road North Aurora, Illinois 60542 - (630-859-7000) 1 year from date of install / 18 month after shipment Yes 1-Jul-2017

Lubricate bearings every 2,000 hours or 4 months.

Eklutna Construction & Maintenance, LLC - 10950

Mausel Street Unit B1a Eagle River, AK 99577 - (907-

696-3838)

PP3 - Filter Backwash Pump

105 GPM

AMT 316A-95

Mechanical Room, Basement Level

Associated Pool Builders, Inc. 2121 Lovett Avenue

Bismarck, ND 58504 - (701-712-3077)

American Machine & Tool Company, Inc. 400 -

Spring Street Royersford, PA 19468 - (610-948-

3800) 12 months from date of purchase

Yes 1-Jul-2017

Eklutna Construction & Maintenance, LLC - 10950

Mausel Street Unit B1a Eagle River, AK 99577 - (907-

696-3838)

ID3 - Filtration System Neptune Benson Defender SP-33-48-

80367-0217

Mechanical Room, Basement Level

Associated Pool Builders, Inc. 2121 Lovett Avenue

Bismarck, ND 58504 - (701-712-3077)

Neptune Benson - 6 Jefferson Drive Coventry, Rhode Island 02816 - (401-821-2200)

10 years lined vessel; 5 years butterfly valves; 10 years internal components; 1 year o-rings, rubber, felt, bump rubber, 3 year hair/lint strainer

Yes 31-Jan-2017

Clean flexible tubes with

Neptune Benson filter cleaner every 6 months; Every 5 years inspect bump tire, busing o-rings, lift shaft o-rings and snap rings; Every 10 years remove lid, pull tubes and inspect

Neptune Benson - 6 Jefferson Drive Coventry, Rhode Island 02816 - (401-821-2200)

ID4 - Chemical Controller BECSys7 1100177002246 Mechanical Room, Basement Level

Associated Pool Builders, Inc. 2121 Lovett Avenue

Bismarck, ND 58504 - (701-712-3077)

BECS Technology - 9487 Dielman Rock Island

Industrial Drive St. Louis, MO 63132 - (314-567-

0088)

Standard 1 year warranty; 5 year for electronics and flow cell, 2 year for pH & ORP sensors Yes 1-Jul-2017

Perform periodic calibration and sensor cleaning per O&M data

BECS Technology - 9487 Dielman Rock Island

Industrial Drive St. Louis, MO 63132 - (314-567-

0088)

ID5 - Chlorination System Stenner Pumps 885MP5 Mechanical Room, Basement Level

Associated Pool Builders, Inc. 2121 Lovett Avenue

Bismarck, ND 58504 - (701-712-3077)

Stenner Pump Company - 3174 DeSalvo Road

Jacksonville, FL 32246 - (800-683-2378) Standard 1 year warranty

Yes 1-Jul-2017

Inspect rubber tubes frequently and replace as required

Eklutna Construction & Maintenance, LLC - 10950

Mausel Street Unit B1a Eagle River, AK 99577 - (907-

696-3838)

ID6 - pH Buffer System Stenner Pumps 45MP3 Mechanical Room, Basement Level

Associated Pool Builders, Inc. 2121 Lovett Avenue

Bismarck, ND 58504 - (701-712-3077)

Stenner Pump Company - 3174 DeSalvo Road

Jacksonville, FL 32246 - (800-683-2378) Standard 1 year warranty

Yes 1-Jul-2017

Inspect rubber tubes frequently and replace as required

Eklutna Construction & Maintenance, LLC - 10950

Mausel Street Unit B1a Eagle River, AK 99577 - (907-

696-3838)

ID7 - UV Treatment Chamber ETS ECF-A-480 AH17/0035 Mechanical Room, Basement Level

Associated Pool Builders, Inc. 2121 Lovett Avenue

Bismarck, ND 58504 - (701-712-3077)

Engineered Treatment Systems - W9654

Beaverland Parkway Beaver Dam, WI -(877-885-

4628) 12 months after commencement of operation; 15 months after dispatch of equipment

Yes 1-Jul-2017

Clean cooling fan every 6 months; Replace UV lamp after 8,000 - 10,000 hours;

Test control panel ground fault relay every 6 months

Eklutna Construction & Maintenance, LLC - 10950

Mausel Street Unit B1a Eagle River, AK 99577 - (907-

696-3838)

ID8 - Hair & Lint Strainers Neptune Benson Guardian Mechanical Room, Basement Level

Associated Pool Builders, Inc. 2121 Lovett Avenue

Bismarck, ND 58504 - (701-712-3077)

Neptune Benson - 6 Jefferson Drive Coventry, Rhode Island 02816 - (401-821-2200) 3 years

Yes 31-Jan-2017

Check strainer screens daily and swap with clean screen as needed

Neptune Benson - 6 Jefferson Drive Coventry, Rhode Island 02816 - (401-821-2200)

ID9 - Air Compressor Ingersoll Rand P1.5IU-A9 P20295T16194 Mechanical Room, Basement Level

Associated Pool Builders, Inc. 2121 Lovett Avenue

Bismarck, ND 58504 - (701-712-3077)

Ingersoll-Rand Company - 800-E Beaty Street

Davidson, NC 28036 - (1-800-483-4981)

1 year standard warranty

Yes 1-Jul-2017

All Season Select synthetic compressor lubricant from start-up recommended.

Eklutna Construction & Maintenance, LLC - 10950

Mausel Street Unit B1a Eagle River, AK 99577 (907-

696-3838)

ID10 - VFD Danfoss GreenDrive 637604Y077 Mechanical Room, Basement Level

Associated Pool Builders, Inc. 2121 Lovett Avenue

Bismarck, ND 58504 - (701-712-3077)

Danfoss Drives - 4401 N. Bell School Road Loves

Park, IL 61111 - (1 (888) DANFOSS) 18 months

Yes 31-Jan-2017 Danfoss Drives - 4401 N. Bell School Road Loves

Park, IL 61111 - (1 (888) DANFOSS)

ID11 - Flow Meter Sensor Signet 2551 Magmeter Mechanical Room, Basement Level

Associated Pool Builders, Inc. 2121 Lovett Avenue

Bismarck, ND 58504 - (701-712-3077)

Georg Fischer Signet LLC - 3401 Aerojet Avenue El

Monte, CA 91731-2882 - (1-800-854-4090) 1 year standard warranty

Yes 1-Jul-2017

Eklutna Construction & Maintenance, LLC - 10950

Mausel Street Unit B1a Eagle River, AK 99577 - (907-

696-3838)

ID13 - Pool Drain Down Pump

105 GPM

AMT 316A-95

Mechanical Room, Basement Level

Associated Pool Builders, Inc. 2121 Lovett Avenue

Bismarck, ND 58504 - (701-712-3077)

American Machine & Tool Company, Inc. - 400

Spring Street Royersford, PA 19468 - (610-948-

3800) 12 months from date of purchase

Yes 1-Jul-2017

Eklutna Construction & Maintenance, LLC - 10950

Mausel Street Unit B1a Eagle River, AK 99577 - (907-

696-3838)

ID14 - Impact Flow Meter Blue-White F-30300P Mechanical Room, Basement Level

Associated Pool Builders, Inc. 2121 Lovett Avenue

Bismarck, ND 58504 - (701-712-3077)

Blue-White Industries, Ltd - 5300 Business Drive

Huntington Beach, CA 92649 - (714-893-8529) 2 years

Yes 31-Jan-2017 Blue-White Industries, Ltd - 5300 Business Drive

Huntington Beach, CA 92649 - (714-893-8529)

MANUAL FILL

TO POOL INLETS

SAMPLE

TAP

WET CELL

WET CELL

ASSEMBLY

FILTER

TO BACKWASH FUNNEL

THRU 6" AIR GAP

SURGE

TANK

AIR VENT TO

ATMOSPHERE

NOTE:

THE WATER CHEMISTRY CONTROLLER SHALL

BE INTERLOCKED WITH THE RECIRCULATION

PUMP TO DISABLE ITS OPERATION WHEN THE

RECIRCULATION PUMP IS SHUT-OFF. THE

WATER CHEMISTRY CONTROLLER SHALL ALSO

BE DISABLED DURING THE BACK-WASH CYCLES.

SYSTEM SHUTOFF VALVE

BACKWASH

THROTTLING

VALVE

FILTER SYSTEM

POOL

POOL

DOMESTIC WATER

SERVICE

N

NETWORK

LINE BY

ELECTRICAL

SODIUM

HYPOCHLORITE

TANK(S)

(LIQUID CHLORINE)

ACID DRUM(S)

OR CARBOY(S)

FS

COMBINATION

SWITCH/RECEPTACLE

COMBINATION

SWITCH/RECEPTACLE

UV

VALVE

UV

BYPASS

VALVE

UV SYSTEM

INTERLOCK WITH MAIN

RECIRCULATION PUMP

UV CONTROL PANEL

UV TREATMENT

CHAMBER

A

PRE-COAT

FILTER

CONTROL

PANEL

MAIN RECIRC. PUMP

A

AIR

COMPRESSOR

TO HEAT

EXCHANGER

REFER TO

MECHANICAL

CPVC

BACKWASH PUMP

CHEMICAL

CONTROLLER

WIRING BOX

MANUAL AIR

BLEED VALVE

FS

E

V

BY PASS PANEL

POOL AND SURGE

TANK DRAIN DOWN PUMP

ALASKA DISTRICT

OF ENGINEERS

US ARMY CORPS

D r a w i n g

F i l e

D w g

S c a l e

P l o t

S c a l e

D a t e

A c t i o n S y m

D r a w n

B y

R E

S I D

E N

T

E

N G

I N

E E

R

D a t e

S T

A T

E

P R

I M

E

C

O N

T R

A C

T O

R

D a t e

D e s c r i p t i o n A p p v d

C I T

Y

C O

N T

R A

C T

O R

C O

N T

R A

C T

N

O

R e c o m m e n d e d

A p p r o v e d

S u b m i t t e d

D e s i g n e d

R e v i e w e d f f i c e

S y m

O f f i c e

S y m

U S

A

R M

Y

E

N G

I N

E E

R

D

I S

T R

I C

T

A N

C H

O R

A G

E

A

L A

S K

A

C O

R P

S

O

F

E

N G

I N

E E

R S

Reference number:

Sheet of

HGFEDCBA

F T

W

A I N

W R

I G

H T

A

L A

S K

A

M E

L A

V E

N

P

O O

L

W

A T

E

A T

M E

N

O V

A T

I O

N

J U

L Y

W

K B

D

F T

W

F

S P

R e c o r d

D r a w i n g

U

N S

I L

M A

H

U N

S A

K E

R

C

G E

N E

R A

L

C M

B

C M

B

J J N

J E

F F

D

O R

F T

K P

B C

O F

F M

J V

C O

U N

S I L M

A N

H

U N

S A

K E

R

S

T

E D

D E

T A

I L S

SP-300

P O

O L

S

Y S

T E

M

H

E M

A T

I

E C

O R

D

D

R A

W I N

G

SCHEMATIC

LEGEND

LEGEND ITEM

FLOW

DIRECTION

BUTTERFLY

VALVE

BALL VALVE

GATE VALVE

MODULATING

FLOAT VALVE

PRESSURE

REDUCING

VALVE

SOLENOID

VALVE

SWING GATE

CHECK VALVE

THREE WAY

VALVE

DUCK BILLED

VALVE

PUMP

HAIR AND LINT

STRAINER

"Y" STRAINER

FLOW METER

FLOW

INTERLOCK

FLOW SENSOR

IMPACT FLOW

METER

VENTURI FLOW

METER

WATER METER

AUTOMATIC AIR

VENT

MANUAL AIR

VENT

PRESSURE

GAUGE AND

COCK

COMPOUND

GAUGE AND

COCK

DIGITAL TEMP

SENSOR

THERMOMETER

GEAR

PNEUMATIC

ACTUATOR

SOLENOID

POWER CORD

FLOW

CONTROL

VALVE

VARIABLE

FREQUENCY

DRIVE

REMOTE

START/STOP

EMERGENCY

STOP

LOW VOLTAGE

CONTROL

WATER LINE

1 PHASE

POWER

3 PHASE

POWER

VENT LINE

CO₂ LINE

NETWORK LINE

NTS

POOL SYSTEMS SCHEMATICS - RECORD DRAWING

EQUIPMENT SCHEDULE

ID ITEM

POOL NAME

RECIRCULATION PUMP 1 (PP1)

REFER: 1/SP-201

RECIRCULATION PUMP 2 (PP2)

REFER: 1/SP-201

FILTER SYSTEM

CHEMICAL CONTROLLER

REFER: 2/SP-201

CHLORINATION SYSTEM

REFER: 3/SP-201

PH BUFFER SYSTEM

REFER: 4/SP-201

UV TREATMENT SYSTEM &

CONTROLLER

REFER: 6/SP-201

HAIR & LINT STRAINERS

AIR COMPRESSOR

VFD

FLOW METER SENSOR

REFER: 9/SP-201

HEATER TEES

POOL AND SURGE TANK DRAIN

DOWN PUMP

IMPACT FLOW METER

REFER: 9/SP-202

BACKWASH FUNNEL

REFER: 1/SP-203

FILTER BACKWASH PUMP (PP3)

REFER: 2/SP-203

BYPASS SWITCH17

RECORD DRAWING

AutoCAD SHX Text S

AutoCAD SHX Text P

AutoCAD SHX Text P

AutoCAD SHX Text P

AutoCAD SHX Text C

AutoCAD SHX Text P

AutoCAD SHX Text C

AutoCAD SHX Text

PRV-1

AutoCAD SHX Text S

AutoCAD SHX Text F

AutoCAD SHX Text

FI

AutoCAD SHX Text

FS

AutoCAD SHX Text W

AutoCAD SHX Text

AV

AutoCAD SHX Text

MV

AutoCAD SHX Text P

AutoCAD SHX Text C

AutoCAD SHX Text G

AutoCAD SHX Text A

AutoCAD SHX Text S

AutoCAD SHX Text V

AutoCAD SHX Text R

AutoCAD SHX Text E

AutoCAD SHX Text

WARRANTY

Seller warrants equipment (and its component parts) of its own manufacture against defects in materials and workmanship under normal use and service for one (1) year from the date of installation or start-up, or for eighteen (18) months after the date of shipment, whichever occurs first. Seller does not warrant accessories or components that are not manufactured by Seller; however, to the extent possible, Seller agrees to assign to Buyer its rights under the original manufacturer's warranty, without recourse to Seller. Buyer must give Seller notice in writing of any alleged defect covered by this warranty (together with all identifying details, including the serial number, the type of equipment, and the date of purchase) within thirty (30) days of the discovery of such defect during the warranty period. No claim made more than 30 days after the expiration of the warranty period shall be valid. Guarantees of performance and warranties are based on the use of original equipment manufactured (OEM) replacement parts. Seller assumes no responsibility or liability if alterations, non-authorized design modifications and/or non-OEM replacement parts are incorporated If requested by Seller, any equipment (or its component parts) must be promptly returned to Seller prior to any attempted repair, or sent to an authorized service station designated by Seller, and Buyer shall prepay all shipping expenses. Seller shall not be liable for any loss or damage to goods in transit, nor will any warranty claim be valid unless the returned goods are received intact and undamaged as a result of shipment. Repaired or replaced material returned to customer will be shipped F.O.B., Seller's factory. Seller will not give Buyer credit for parts or equipment returned to Seller, and will not accept delivery of any such parts or equipment, unless Buyer has obtained Seller's approval in writing. The warranty extends to repaired or replaced parts of Seller's manufacture for ninety (90) days or for the remainder of the original warranty period applicable to the equipment or parts being repaired or replaced, whichever is greater. This warranty applies to the repaired or replaced part and is not extended to the product or any other component of the product being repaired. Repair parts of its own manufacture sold after the original warranty period are warranted for a period of one (1) year from shipment against defects in materials and workmanship under normal use and service. This warranty applies to the replacement part only and is not extended to the product or any other component of the product being repaired. Seller may substitute new equipment or improve part(s) of any equipment judged defective without further liability. All repairs or services performed by Seller, which are not covered by this warranty, will be charged in accordance with Seller's standard prices then in effect.

THIS WARRANTY IS THE SOLE WARRANTY OF SELLER AND SELLER HEREBY EXPRESSLY DISCLAIMS AND BUYER WAIVES ALL OTHER WARRANTIES EXPRESSED, IMPLIED IN LAW OR IMPLIED IN FACT, INCLUDING ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Seller's sole obligation under this warranty shall be, at its option, to repair or replace any equipment (or its component parts) which has a defect covered by this warranty, or to refund the purchase price of such equipment or part. Under the terms of this warranty, Seller shall not be liable for (a) consequential, collateral, special or liquidated losses or damages; (b) equipment conditions caused by normal wear and tear, abnormal conditions of use, accident, neglect, or misuse of said equipment; (c) the expense of, and loss or damage caused by, repairs or alterations made by anyone other than the Seller; (d) damage caused by abrasive materials, chemicals, scale deposits, corrosion, lightning, improper voltage, mishandling, or other similar conditions; (e) any loss, damage, or expense relating to or resulting from installation, removal or reinstallation of equipment; (f) any labor costs or charges incurred in repairing or replacing defective equipment or parts, including the cost of reinstalling parts that are repaired or replaced by Seller; (g) any expense of shipment of equipment or repaired or replacement parts; or (h) any other loss, damage or expense of any nature.

The above warranty shall not apply to any equipment which may be separately covered by any alternate or special warranties.

PERFORMANCE: In the absence of Certified Pump Performance Tests, equipment performance is not warranted or guaranteed.

Performance curves and other information submitted to Buyer are approximate and no warranty or guarantee shall be deemed to arise as a result of such submittal. All testing shall be done in accordance with Seller's standard policy under Hydraulic Institute procedures.

LIABILITY LIMITATIONS: Under no circumstances shall the Seller have any liability under the Order or otherwise for liquidated damages or for collateral, consequential or special damages or for loss of profits, or for actual losses or for loss of production or progress of construction, regardless of the cause of such damages or losses. In any event, Seller's aggregate total liability under the Order or otherwise shall not exceed the contract price.

ACTS OF GOD: Seller shall in no event be liable for delays in delivery of the equipment or other failures to perform caused by fires, acts of God, strikes, labor difficulties, acts of governmental or military authorities, delays in transportation or procuring materials, or causes of any kind beyond Seller's control.

COMPLIANCE WITH LAW: Seller agrees to comply with all United States laws and regulations applicable to the manufacturing of the subject equipment. Such compliance shall include: The Fair Labor Standards Acts of 1938, as amended; Equal Employment Opportunity clauses of Executive Order 11246, as amended; Occupational Safety and Health Act of 1970 and the standards promulgated thereunder, if applicable. Since compliance with the various Federal, State, and Local laws and regulations concerning occupational health and safety, pollution or local codes are affected by the use, installation and operation of the equipment and other matters over which Seller has no control, Seller assumes no responsibility for compliance with those laws and regulations, whether by way of indemnity, warranty, or otherwise. It is incumbent upon the Buyer to specify equipment which complies with local codes and ordinances.

800 Airport Road North Aurora, Illinois 60542 630-859-7000 www.aurorapump.com crichardson Typewritten Text PP1 - Pool Recirculation Pump 720GPM Aurora 341A-BE PP2 - Pool Recirculation Pump 720GPM Aurora 341A-BE crichardson Typewritten Text PP3 - Filter Backwash Pump 105 GPM AMT 316A-95 ID13 - Pool Drain Down Pump 105 GPM AMT 316A-95

HOME OFFICE:A//oci<ite<J Pool Builder/, Inc.

PO Box 2318 • Bismarck. ND 58502-2318 2121 Lovett Ave. • Bismarck, ND 58504 Ph: 701-258-6012 • Fax: 701-224-9729

FTW392 SWIMMING POOL EQUIPMENT WARRANTY

PROJECT: Melaven Pool Water Treatment Renovation Bldg 3452, Santiago Avenue Ft Wainwright, AK 99703

Associated Pool Builders, Inc. acknowledges our responsibility in connection with the warranty provisions of the contract as set forth in the contract specifications.

The following items, equipment or systems furnished under this contract are hereby warranted against defective design, material and workmanship for a period as indicated.

Manufacturer’s Warranties-Swimming Pool Mechanical Equipment:

Aurora Recirculation Pumps: 1 year

PP1: Serial #AS17-40183-1 PP2: Serial #AS17-40183-2

ETS UV: Serial # APT-2025-A Ultra Violet Chamber & Spectra Control: 1 year UV Lamps, Quartz & Seals: 3,000 hours

Neptune Benson Products:

VFD: Serial # 637604Y077; 18 months Filter: Serial # 80367-0217; 10 year

BECSystems 7 Chemical Controller:

Serial# 1100177002246 Electronics: 5 year pH, ORP, Temperature Sensors: 2 years

Stenner Chemical Feed Pumps:

85MP5, 45MP3; 1 year

Upon receipt of notice from the Government of failure of any part or parts of the warranted item, equipment, or system during the warranty period, the affected part or parts will be replaced promptly with new parts.

We are responsible to coordinate with manufacturers for the warranty provisions of this contract.

Correspondence regarding the failure of any of the preceding items, equipment or systems covered by the warranty provisions of this contract should be addressed to:

Associated Pool Builders, Inc.

2121 Lovett Avenue Bismarck, North Dakota 58504 Phone: 701-258-6012 Fax: 701-224-9729

Sincerely, S~-J3 - ij David A. Volk, Vice President Associated Pool Builders, Inc.

L I M I T E D W A R R A N T Y

DEFENDER FILTER TANKS WITH FLEXSOL 3000 INTERIOR LINING

NEPTUNE-BENSON LLC, (Manufacturer) warrants for a period of ten (10) years from the date of delivery to the original purchaser that the Flexsol 3000 lined vessel shall be free from leaks due to defects in workmanship or material when used in accordance with the Manufacturer’s installation, operating and maintenance instructions. Exposure of Flexsol 3000 lined vessels to temperatures below minus 25°F or above 120 F for extended periods of time may impact the lining integrity and void the warranty. Liability under the foregoing warranty is limited to either repair, or replacement, at the

Manufacturer’s option, within a reasonable time after receipt of notice in writing of a defect, and is expressly conditioned upon the receipt of such notice within the period of the warranty indicated and shall in no event include any resulting or consequential damages. Field inspection of the reported defect shall be performed by an authorized factory representative or by other means acceptable to the manufacturer. Safe access to the filter, including piping removal, clear space, ladder, power, and lighting, to be provided by Customer on a mutually agreed basis.

The cost of filter access, tank removal, tank lid removal, tank reinstallation and transportation shall be borne by the user.

The component parts that constitute an automatic regeneration system such as the RMF controller, quick exhaust valve, solenoid valves, pneumatic valves operators, and all o-rings, rubber and felt gaskets and the bump tire shall be warranted for a period of one (1) year. Dominion butterfly valves shall be warranted for a period of five (5) years. Internal components including the flex tubes, influent manifold, tube sheet, lift shaft, bump mechanism (excluding tire) and hold down plates shall be warranted for a period of ten (10) years. All components are subject to the conditions in the

Manufacturer’s installation, operating and maintenance instructions. Items of equipment by other manufacturers including the vacuum transfer pump with associated valves and the filter/regulator carry standard warranties as provided by each manufacturer and are subject to the conditions of the original equipment manufacturers installation, operating and maintenance instructions.

Issuance of warranty is in consideration that all indebtedness to Neptune-Benson for contracted work has been satisfied.

DATE OF DELIVERY: January 31, 2017

PROJECT NAME: Melaven Pool Renovation (80367) crichardson

ID3 - Filtration System Neptune Benson Defender SP-33-48-732

Rev 2 5/2/11

L I M I T E D W A R R A N T Y

ACCESSORY PRODUCTS

NEPTUNE-BENSON LLC, (Manufacturer) warrants for a period as indicated that the product shall be free from defects in workmanship or material when used in accordance with the Manufacturer’s installation, operating and maintenance instructions. Liability under the foregoing warranty is limited to either repair, or replacement, at the Manufacturer’s option, within a reasonable time after receipt of notice in writing of a defect, and is expressly conditioned upon the receipt of such notice within the period of the warranty indicated and shall in no event include any resulting or consequential damages.

The cost of removal, reinstallation and transportation shall be borne by the user.

AEGIS Anti-Entrapment Shield 10 Years SS Surge Tank Ladder 5 Years Dominion Butterfly Valves* 5 Years Viceroy Butterfly Valves* 5 Years Guardian Hair & Lint Strainer (Stainless Steel/Fiberglass) 3 Years ProStrainer 3 Years Stainless Steel/Fiberglass Reducing & Fittings 3 Years GreenDrive VFD 18 Months CO2 Feed Units 1 Year Stainless Steel Main Drains 1 Year Stainless Steel Frames with Fiberglass Grates 1 Year Stainless Steel/PVC Diversion Valves 1 Year Water Level Controllers 1 Year MFP3 Automatic Backwash 1 Year

All components are subject to the conditions in the Manufacturer’s installation operating, and maintenance instructions. Issuance of warranty is in consideration that all indebtedness to Neptune- Benson for contract work has been satisfied.

*Warranty covers valve bodies only. All operators including levers, gears, extensions and electric actuators carry a one (1) year warranty.

Any parts manufactured by companies other than Neptune-Benson will carry the associated manufacturer's warranty.

crichardson Typewritten Text

ID8 - Hair & Lint Strainers Neptune Benson Guardian

9487 Dielman Rock Island Industrial Dr. St. Louis, MO 63132 Tel:(314) 567-0088

Installation and Technical Manual Rev: E08

Section J: Warranty

LIMITED WARRANTY

BECS warrants the controller electronics and flow cell against any defect in workmanship or materials for a period of five years from the date of shipment. BECS warrants the pH and ORP sensors against any defect in workmanship or materials for a period of two years from the date of shipment. In the event of a component failure due to any defect in workmanship or materials, BECS will repair, or if repair is not possible, replace the defective part or parts of the BECSys controller.

BECS will have the sole right to determine whether to repair or replace a product. BECS will not be responsible for any expense associated with installation of repaired or replacement parts.

LIMITATIONS AND EXCLUSIONS

This is a LIMITED WARRANTY. BECS makes NO WARRANTIES other than those contained herein. The LIMITED WARRANTY replaces and is in lieu of any WARRANTIES of MERCHANTABILITY or of FITNESS FOR A PARTICULAR PURPOSE which are expressly DISCLAIMED. All GENERAL, SPECIAL, INDIRECT, INCIDENTAL AND/OR

CONSEQUENTIAL DAMAGES ARE EXCLUDED AND DISCLAIMED.

This Limited Warranty is governed by Missouri Law and all disputes related to or arising from this transaction or Limited Warranty shall be resolved in Circuit Court of St. Louis County, Missouri.

Any claims under this Limited Warranty must be brought within ONE YEAR after the cause of action accrued.

crichardson

ID4 - Chemical Controller BECSys7

USA and Canada 800.683.2378, International 904.641.1666

WARRANTY AND CUSTOMER SERVICE

LIMITED WARRANTY

Stenner Pump Company will for a period of one (1) year from the date of purchase (proof of purchase required) repair or replace – at our option – all defective parts. Stenner is not responsible for any removal or installation costs. Pump tube assemblies and rubber components are considered perishable and are not covered in this warranty. Pump tube will be replaced each time a pump is in for service, unless otherwise specified. The cost of the pump tube replacement will be the responsibility of the customer. Stenner will incur shipping costs for warranty products shipped from our factory in Jacksonville, Florida. Any tampering with major components, chemical damage, faulty wiring, weather conditions, water damage, power surges, or products not used with reasonable care and maintained in accordance with the instructions will void the warranty. Stenner limits its liability solely to the cost of the original product. We make no other warranty expressed or implied.

RETURNS

Stenner offers a 30-day return policy on factory direct purchases. Except as otherwise provided, no merchandise will be accepted for return after 30 days from purchase. To return merchandise at any time, call Stenner at 800.683.2378 for a Return Merchandise Authorization (RMA) number. A 15% re-stocking fee will be applied. Include a copy of your invoice or packing slip with your return.

DAMAGED OR LOST SHIPMENTS

All truck shipments: Check your order immediately upon arrival. All damage must be noted on the delivery receipt. Call Stenner Customer Service at 800.683.2378 for all shortages and damages within seven (7) days of receipt.

SERVICE & REPAIRS

Before returning a pump for warranty or repair, remove chemical from pump tube by running water through the tube, and then run the pump dry. Following expiration of the warranty period, Stenner Pump Company will clean and overhaul any Stenner metering pump for a minimum labor charge plus necessary replacement parts and shipping. All metering pumps received for overhaul will be restored to their original condition. The customer will be charged for missing parts unless specific instructions are given. To return merchandise for repair, call Stenner at 800.683.2378 or 904.641.1666 for a Return Merchandise Authorization (RMA) number.

DISCLAIMER

The information contained in this manual is not intended for specific application purposes.

Stenner Pump Company reserves the right to make changes to prices, products, and specifications at any time without prior notice.

crichardson Typewritten Text ID5 - Chlorination System Stenner Pumps 885MP5 ID6 - pH Buffer System Stenner Pumps 45MP3 www.neptunebenson.com • www.vortisand.com • 6 Jefferson Drive • Coventry, RI 02816 • Phone: 401.821.2200

ETS-UV EQUIPMENT WARRANTY

Product Warranty – Terms and Conditions

ETS-UV disinfection units supplied by Neptune Benson have an associated warranty. The terms and conditions of this warranty are as detailed below.

1. Product

Duration

The product (excluding consumables) is guaranteed from the earliest of either:

12 months after commencement of operation*

15 months after dispatch of the equipment*

*The customer/distributor must return a signed copy of the Outwork Sheet to initiate the warranty.

Replacement of components under warranty

The manufacturer will supply replacement components to the same specification of the original component, delivered by carrier free of charge to the equipment site. The manufacturer reserves the right to request that items claimed as faulty under warranty are returned freight paid to the factory for inspection. Should the user unreasonably fail to return the defective item then the manufacturer reserves the right to charge for any items claimed under warranty.

Manufacturer repair under warranty

The manufacturer will carry out repairs under warranty under the following provisions:

The manufacturer will carry out a full repair and re-test of the equipment if required in the factory. In such circumstances all components and labor would be free of charge, as would any return freight. The user would be expected to return the unit for repair to the factory in good order.

The manufacturer can carry out repairs to the unit on site. Under such circumstances all site labor will be free of charge but the manufacturer reserves the right to charge for all travel time and travel expenses.

2. Consumables

Definition

Consumables are normally defined as all components having a limited life e.g. UV Lamps, Quartz sleeves, Seals, Wiper blades, Wiper bushings.

Replacement of components under warranty

The warranty period for consumables is dependent on the use and type and users should consult on the consumables warranty for each installed system. The General Warranty is: UV Lamps 4000 hours use

(assuming no more than 1 switch cycle per 24 hour operation). Pro-rated from 4000 hrs. to 8000 hrs.

crichardson Typewritten Text ID7 - UV Controller ETS ECF-220 ID7 - UV Treatment Chamber ETS ECF-A-480 www.neptunebenson.com • www.vortisand.com • 6 Jefferson Drive • Coventry, RI 02816 • Phone: 401.821.2200

Quartz sleeve 2 years use, excluding accidental damage

Seals replaced after use on each occasion:

- Wiper seals 12 months operation (on normal operation)

- Wiper blades 6 months operation (on normal operation)

- Wiper bushings 12 months operation (on normal operation)

Replacement of consumables under warranty

The manufacturer will supply factory approved replacement consumables to the same specification of the original component. The manufacturer reserves the right to request that items claimed as faulty under warranty are returned to the factory for inspection. Should the user unreasonably fail to return the defective item then the manufacturer reserves the right to charge for any items claimed under warranty.

Where consumables have run to more than 50% of their rated life then a pro-rata credit is normally issued.

Manufacturer repair under warranty

The user normally carries out consumable replacement. Should the manufacturer be requested to replace on site then all charges will be to the users account.

3. Force Majeure

Neptune Benson shall not be liable for any warranty claims resulting in whole or in part from Acts of God, severe conditions, improper installation/operation or circumstances beyond their control.

Effective 9-30-10

Questions? Parts? Service?

1-800 AIR SERV

Visit our website:

www.air.irco.com

Retain your receipt as proof of purchase in the event of a claim under warranty.

http://air.irco.com P1.5IU-A9 crichardson

ID9 - Air Compressor Ingersoll Rand P1.5IU-A9

Description DrivePro® Standard EXTENDED WARRANTY

Coverage and Customer responsibilities DrivePro® Standard Extended Warranty prolongs the standard warranty provided under the Danfoss General Terms and Conditions of Sale (the “Terms”).

DrivePro® Standard Extended Warranty is intended for drives which can be shipped to and repaired in the Danfoss workshop. The workshop repair is carried out by certified service personnel who are equipped with right tools, original spare parts and instructions, and they follow high quality standards. Workshop repairs are normally carried out within 8-10 working days from receipt by Danfoss of the defective drive.

DrivePro® Standard Extended Warranty covers:

Coverage duration from 24 to 72 months from date of delivery as selected and purchased by the customer Coverage includes repair, replacement or credit of a drive that is found to be defective at the time of delivery due to faulty manufacture, design and/or defective materials Coverage includes factory installed options sold with the drive

Cost of spare parts or replacement drive Cost of freight of spare parts, repaired or replaced drive from Danfoss to customer

Cost of labor for repair work at Danfoss workshop

DrivePro® Standard Extended Warranty excludes:

Any loss or damages caused by a defective product unless otherwise provided under the Terms

Any costs and expenses resulting from onsite repair (including travel costs) Dismantling, installation or commissioning of the product Defects caused by normal wear and tear or external factors, such as (i) incorrect use, installation, operation or maintenance, (ii) improper connection to peripheral or third party products, (iii) use of non-Danfoss spare parts, (iv) modification or repair performed by a person not authorized by Danfoss, (v) natural disaster, (vi) connection to irregular voltage sources or (vii) operation outside the usage parameters stated in the user’s manual

Peripheral items and options not purchased with the drive Cost of freight to ship product from installation to Danfoss workshop Customs duties and taxes crichardson

ID10 - VFD Danfoss GreenDrive

Note: In case of warranty exclusion, Danfoss will inform the customer and charge a fee for the service efforts. DrivePro® Standard Extended Warranty coverage is intended for workshop repair only. It is not suitable for products too large to be removed and returned to a Danfoss facility workshop.

Customer Responsibilities

Customer shall adhere to the following requirements in order to ensure that the warranty is valid:

- The start-up shall be performed by Danfoss or according to Danfoss’ instructions

- Installation shall be performed in accordance with Danfoss instructions

- Ambient conditions shall follow the specification

- The product shall be used in accordance with Danfoss instructions and the user manual

- The recommended maintenance plan shall be followed

- Customer shall provide product serial number and sales code to verify a warranty claim

- Customer is responsible for packaging the return product to prevent additional damage to the product sent to Danfoss workshop

Danfoss General Terms and Conditions of Sale apply to the DrivePro® Standard

Extended Warranty.

Warranty Statement