(B6)-QA-29APR2024_SMM Part Washers.pdf

119 KB Posted

Attached to
Front Load Part Washers
Solicitation number
W911YP24R0011
Issued by

About this file

Written by GovTribe AI ·

This document is a Request for Quote (RFQ) for Front Load Power Part Washers issued by the Utah Army National Guard under Solicitation Number W911YP24R0011.

The solicitation is for a total of 5 front load part washers, with 3 Model EM3040 40-inch working height washers and 2 upgraded 2 HP pump models. The washers must meet specific requirements for load height, wash tank heating, and rust preventative soap. Interested offerors must submit quotes by 10:00 AM MST on 04 May 2024. Award will be made on a firm-fixed price, lowest price technically acceptable basis to a small business concern under NAICS code 333318. Offerors must be registered in SAM.gov. Questions related to the requirement can be directed to the Contracting Point of Contact. The solicitation includes applicable FAR and DFARS provisions and clauses.

View the file

Other files

File Type Posted
A2-Pictures location at Logan for Part Washer.pdf PDF
A2-Pictures location at ST George for Part Washer.pdf PDF
A2-Pictures location at Ogden for Part Washer.pdf PDF
(A2)- SPECs Updated for Part Washers (4-29-24).pdf PDF
(B6)-QA-25APR2024_SMM Part Washers.pdf PDF
(A2)- SPECs Updated for Part Washers (4-25-24).pdf PDF
Parts Washers Technical Specifications (updated 4-16-24).pdf PDF
A2-JA Band Name-Equivalent_FMS1_Parts Washers.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Q&A for SMM Part Washer

1) What is the load height for each of the washers and work opening height?

The Ogden & Logan part washer: It depends on the measurements, there is a minimum and maximum on the dimensions. Please see the attached updated SPECs “SPECs Updated for Part Washers (4-29-24)” for the minimum and maximum dimensions on EACH part washers. These machines need to be front loading not top loading.

The ST George part washer: Must have at least 40” H, which the door needs from loading door needs to be front loading so the height should be close to the same. These machines need to be front loading not top loading.

2) Is the wash tank heated?

Yes, they all need to be heated…but only two of the part washers has requested “24 hour / 7-day heater & skimmer timer” (the two that are 24 hr / 7 days are Ogden & Logans).

3) Do you know if they will be using a soap with a Rust Preventative (RP)?

Yes, all three (3) has requested RP.

File details come from the government source that posted it. Updated .