Salient_Features.pdf

SALIENT FEATURES

Item 0001 – Hydraulic Excavator h7et9sfs Rectangle h7et9sfs Rectangle h7et9sfs Rectangle h7et9sfs Rectangle h7et9sfs Rectangle

Item 0002 – Front End Loader

Polygonal Line

Item 0003 – Vibratory Driver

HAMMER & STEEL, INC.

11916 Missouri Bottom Road St. Louis, MO 63042

1-800-325-PILE (7453)

Fax (314) 895-4070 www.hammersteel.com

Model HS-6600 Vibratory Driver / Extractor System

Vibrator Eccentric Moment 6,600 in-lbs (7620 kg-cm)

Frequency 1,600 vpm (1600 vpm)

Centrifugal Force 240 tons (2135 kN)

Amplitude (Free Hanging) 1.23 in (32 mm)

Max Line Pull For Extracting (Variable) 80 tons (710 kN)

Weight (No Clamps or Hoses) 15,250 lbs (6920 kg)

Non-Vibrating Weight 4,550 lbs (2065 kg)

Height (Without Clamp) 100 in (2540 mm)

Length 97 in (2465 mm)

Width 22 in (560 mm)

Throat Width 14.25 in (360 mm)

Hydraulic Hose Length 150 ft (45 m)

Hydraulic Hose Weight 2,250 lbs (1020 kg)

Power Unit Engine Caterpillar 3412TA

Power 750 HP (596 kW)

Operating Speed 1,900 rpm (1900 rpm)

Drive Pressure 5,500 psi (380 bar)

Drive Flow 237 gpm (897 lpm)

Clamp Pressure 5,500 psi (380 bar)

Clamp Flow 6.5 gpm (25 lpm)

Weight (with Full Fluid & Fuel) 22,400 lbs (10,160 kg)

Length 186 in (4725 mm)

Width 66 in (1675 mm)

Height 101 in (2565 mm)

Hydraulic Reservoir 550 gal (2080 I)

Fuel Capacity 240 gal (910 I)

Hydraulic Clamps Standard Universal Clamp Concrete Clamp Casing Clamps w/ 7' Beam Casing Clamps w/11' Beam

Clamping Force 200 tons (1780 kN) 175 tons (1560 kN) 250 tons (2225 kN) 250 tons (2225 kN)

Weight 3,000 lbs (1361 kg) 11.000 lbs (4990 kg) 5,300 lbs (2404 kg) 7,960 lbs (3610 kg)

Length 57 in (1448 mm) 77 in (1955 mm) 110 in (2795 mm) 150 in (3810 mm)

Width 15 in (381 mm) 34 in (865 mm) 13 ¾ in (350 mm) 17 in (435 mm)

Height 37 ¾ in (970 mm) 73 ½ in (1870 mm) 33 ½ in (850 mm) 43 in (1095 mm) h7et9sfs Highlight h7et9sfs Rectangle h7et9sfs Highlight h7et9sfs Highlight h7et9sfs Highlight h7et9sfs Highlight h7et9sfs Highlight h7et9sfs Highlight h7et9sfs Highlight

Highlight

Item 0004 – Hydraulic Hammer Excavator Attachment

Hydraulic Hammers

Hydraulic Hammers

! Most Complete Line in the Industry

! Complete Hydraulic Kits Designed to fit Your Carrier

! Industry’s Most Comprehensive Field Service Corps

! Extensive Parts Distribution System

! Network of Nearly 300 Distributor Outlets

NPK ATTACHMENTS...designed, built and backed by NPK.NPK ATTACHMENTS...designed, built and backed by NPK.

Sleeve vs. Main Body Replacement Cost Comparison

1,000 ft. lbs.

Class

5,000 ft. lbs.

Class

$0 $10,000 $20,000 $30,000 $40,000 $50,000 $60,000 $70,000

NPK Hammers Competitive Hammers

All the Right Attachments!All the Right Attachments!

A better design that combines

! EFFICIENCY ! RELIABILITY ! SERVICEABILITY

A. Excellent power-to-weight ratio B. Unique gas-charged piston maximizes hammer efficiency C. Simple, two-moving-parts design for reliability D. Separate ports for the NPK Auto Lube system and an air line for underwater use E. Bottom tie rod nuts for easier serviceability (GH Models) F. Quick-change tool system with single round retainer pin G. Variety of tool configurations available H. Replaceable cylinder sleeves for easy, economical rebuild I. Tool bushings engineered for quick, easy replacement

Vibration control that increases operator comfort to increase EFFICIENCY Standard on all medium and large NPK hammers, our shock-absorbing mounting bracket uses special heavy duty rubber mounts to absorb shock, recoil, and impulse vibration. Their unique one-piece design eliminates the need for mechanical springs and overly heavy mounting brackets. The net result is that you minimize machine wear and improve operator comfort for greater reliability and productivity.

Simplified lubrication for greater RELIABILITY A grease port is provided for automatic and/or manual greasing of the demolition tool. This prevents damage or premature wear caused by a lack of grease.

Full SERVICEABILITY of the industry’s easiest, lowest cost, body-rebuild system Hammers aren’t meant to have an easy life. They occasionally need to be rebuilt. When the hammer body is involved, NPK’s replaceable sleeve design can reduce your costs by a factor of five to ten. Here are the typical costs involved to re-sleeve the body of an NPK hammer and replace the main body of a hammer from another major manufacturer.

R ub be r

M ou nt

H am m er

Bracket

A

B

D

C

H

I

F

G

E

HYDRAULIC HAMMERSHYDRAULIC HAMMERS

The right model for every machine

NPK Construction Equipment, Inc.

7550 Independence Drive Walton Hills, OH 44146-5541 Phone (440) 232-7900 Toll-free (800) 225-4379 Fax (440) 232-4382 Internet: www.npkce.com

Each product sold by NPK is subject to an express written warranty. NPK makes no other warranty, express or implied, including any warranty of merchantability or fitness for any particular purpose. NPK is not liable for any incidental or consequential damages.

Printed in U.S.A. Form No. B03-0100 (02/11) © Copyright 2011, NPK Construction Equipment, Inc.

Sold and Serviced by:

NPK...All the Right Attachments! With innovation throughout construction’s most extensive line.

Compactor/Drivers Primary/Secondary Crushers Breaker Buckets Material Processors Heavy Duty Grapples Pedestal Breakers Quick Attach Couplers

Specifications NPK Impact Energy Impact Recommended Oil Operating Working Tool Tool Working Model Class* Frequency Carrier Weight Flow Pressure Weight Diameter Length ft lbs bpm tons gpm (lpm) psi (bar) lb (kg) in (mm) in (mm)

GH-06 150 480-1200 1.2-2.2 2.5-7 1,650 235 1.7 12.2

(10-25) (115) (107) (42) (311)

GH-07 200 500-1200 1.5-2.75 4-9 1,500 270 1.9 13.1

(15-35) (105) (125) (47) (333)

GH-1 350 550-1100 2.5-4.5 7-13 1,750 450 2.2 13.6

(25-50) (120) (205) (57) (346)

GH-2 500 500-1300 3-6 7-17 2,250 525 2.6 14.4

(25-65) (160) (240) (66) (367)

GH-3 750 500-1150 4-7.5 12-26 1,900 800 3.0 16.1

(45-100) (130) (365) (76) (408)

GH-4 1,300 400-1050 6.5-11 13-32 2,200 1,250 3.4 18

(50-120) (150) (570) (86) (458)

GH-6 2,000 500-800 11-15.5 24-40 2,400 2,150 4.2 20

(90-150) (165) (980) (106) (500)

GH-7 2,500 400-750 14-21 26-48 2,600 2,900 4.6 23

(100-180) (180) (1,320) (116) (583)

GH-9 3,000 500-670 20-28 40-53 2,600 3,600 5.0 24

(150-200) (180) (1,635) (126) (608)

GH-10 4,000 400-550 23-33 44-55 2,600 4,200 5.4 24.5

(165-210) (180) (1,900) (136) (620)

GH-12 5,500 380-480 28-43 45-58 2,650 5,650 5.7 25.5

(170-220) (183) (2,565) (146) (650)

GH-15 8,000 320-400 33-50 53-66 2,600 6,800 6.1 27

(200-250) (180) (3,085) (156) (690)

GH-18 12,000 300-400 35-57 58-77 2,500 7,800 6.5 29

(220-290) (172) (3,540) (165) (740)

GH-23 13,500 300-400 50-75 66-85 2,600 9,240 6.9 34.6

(250-320) (180) (4,190) (174) (880)

GH-30 15,000 310-390 50-93 74-92 2,600 13,500 7.2 32

(280-350) (180) (6,125) (184) (813)

GH-40 17,000 240-330 80-130 79-106 2,600 17,000 8.0 35.4

(300-400) (180) (7,710) (204) (899)

GH-50 20,000 210-280 120+ 92-119 2,600 24,910 8.4 39.7

(350-450) (180) (11,300) (214) (1008)

* “Impact Energy Class” is a marketing rating and does not relate to measured impact energy.

Working weights may vary with bracket configuration. Specifications subject to change without notice.

h7et9sfs Rectangle

Highlight

Optional Item 0006 – Bulldozer

Typewritten Text h7et9sfs Rectangle h7et9sfs Rectangle h7et9sfs Rectangle