SOLICITATION AMENDMENT W911N2-22-R-0030 P00008.pdf

W25G1Q1079R002

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of this amendment is to answ er questions from a prospective offeror. In addition a revision has been made to paragraph 5.4.4 Blaster Suits of the PWS. All other terms and conditions remain the same.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 20

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 25-Jan-2022

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street , County, State and Zip Code) X W911N221R0030

X 9B. DATED (SEE ITEM 11)

27-May-2021

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

25-Jan-2022

CODE

LETTERKENNY ARMY DEPOT

LETTERKENNY CONTRACTING OFFICE - ACC-RSA-LEAD

1 OVERCASH AVENUE, ATTN: CCAM-MLK, BLDG 2S

CHAMBERSBURG PA 17201-4150

W911N2 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

W911N221R0030

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 1449 - CONTINUATION SHEET

SUPPLIES OR SERVICES AND PRICES

CLIN 0001

The CLIN extended description has changed from:

ESTIMATED QUANTITIES ARE 240/PER WEEK. GOVERNMENT OWNED WILL REQUIRE CLEANING

SERVICE ONCE PER WEEK. THE CONTRACTOR SHALL FURNISH ALL

NECESSARY LABOR, TRANSPORTATION, MATERIALS, QUALITY CONTROL, PICKUP AND DELIVERY

AND OTHER ITEMS NECESSARY TO PROVIDE LETTERKENNY ARMY DEPOT WITH CLOTHING

RENTAL, CLOTHING REPAIR, CLEANING, DUMP CONTAINERS AND LAUNDRY SERVICES IN

ACCORDANCE WITH THE TERMS AND CONDITIONS OF THE PERFORMANCE WORK STATEMENT.

BLASTER SUITS ARE GOVERNMENT OWNED AND THE LAUNDERING STANDARDS ARE OUTLINED

IN THE PWS. BLASTER SUITS MUST BE KEPT SEPARATE FROM OTHER ITEMS DUE TO THE

POTENTIAL FOR LEAD, CADMIUM, AND/OR CHROMIUM CONTAMINATION.

To:

ESTIMATED QUANTITIES ARE 240/PER WEEK. GOVERNMENT OWNED WILL REQUIRE CLEANING

SERVICE ONCE PER WEEK. THE CONTRACTOR SHALL FURNISH ALL NECESSARY LABOR,

TRANSPORTATION, MATERIALS, QUALITY CONTROL, PICKUP AND DELIVERY AND OTHER ITEMS

NECESSARY TO PROVIDE LETTERKENNY ARMY DEPOT WITH CLOTHING RENTAL, CLOTHING

REPAIR, CLEANING, DUMP CONTAINERS AND LAUNDRY SERVICES IN ACCORDANCE WITH THE

TERMS AND CONDITIONS OF THE PERFORMANCE WORK STATEMENT. BLASTER SUITS ARE

GOVERNMENT OWNED AND THE LAUNDERING STANDARDS ARE OUTLINED IN THE PWS.

BLASTER SUITS MUST BE KEPT SEPARATE FROM OTHER ITEMS DUE TO THE POTENTIAL FOR

LEAD, CADMIUM, AND/OR CHROMIUM CONTAMINATION.

CLIN 1001

ESTIMATED QUANTITIES ARE 240/PER WEEK. GOVERNMENT OWNED WILL REQUIRE CLEANING

SERVICE ONCE PER WEEK. THE CONTRACTOR SHALL FURNISH ALL

NECESSARY LABOR, TRANSPORTATION, MATERIALS, QUALITY CONTROL, PICKUP AND DELIVERY

AND OTHER ITEMS NECESSARY TO PROVIDE LETTERKENNY ARMY DEPOT WITH CLOTHING

RENTAL, CLOTHING REPAIR, CLEANING, DUMP CONTAINERS AND LAUNDRY SERVICES IN

ACCORDANCE WITH THE TERMS AND CONDITIONS OF THE PERFORMANCE WORK STATEMENT.

BLASTER SUITS ARE GOVERNMENT OWNED AND THE LAUNDERING STANDARDS ARE OUTLINED

SERVICE ONCE PER WEEK. THE CONTRACTOR SHALL FURNISH ALL NECESSARY LABOR,

TRANSPORTATION, MATERIALS, QUALITY CONTROL, PICKUP AND DELIVERY AND OTHER ITEMS

NECESSARY TO PROVIDE LETTERKENNY ARMY DEPOT WITH CLOTHING RENTAL, CLOTHING

REPAIR, CLEANING, DUMP CONTAINERS AND LAUNDRY SERVICES IN ACCORDANCE WITH THE

TERMS AND CONDITIONS OF THE PERFORMANCE WORK STATEMENT. BLASTER SUITS ARE

GOVERNMENT OWNED AND THE LAUNDERING STANDARDS ARE OUTLINED IN THE PWS.

BLASTER SUITS MUST BE KEPT SEPARATE FROM OTHER ITEMS DUE TO THE POTENTIAL FOR

CLIN 2001

ESTIMATED QUANTITIES ARE 240/PER WEEK. GOVERNMENT OWNED WILL REQUIRE CLEANING

SERVICE ONCE PER WEEK. THE CONTRACTOR SHALL FURNISH ALL

NECESSARY LABOR, TRANSPORTATION, MATERIALS, QUALITY CONTROL, PICKUP AND DELIVERY

AND OTHER ITEMS NECESSARY TO PROVIDE LETTERKENNY ARMY DEPOT WITH CLOTHING

RENTAL, CLOTHING REPAIR, CLEANING, DUMP CONTAINERS AND LAUNDRY SERVICES IN

ACCORDANCE WITH THE TERMS AND CONDITIONS OF THE PERFORMANCE WORK STATEMENT.

BLASTER SUITS ARE GOVERNMENT OWNED AND THE LAUNDERING STANDARDS ARE OUTLINED

SERVICE ONCE PER WEEK. THE CONTRACTOR SHALL FURNISH ALL NECESSARY LABOR,

TRANSPORTATION, MATERIALS, QUALITY CONTROL, PICKUP AND DELIVERY AND OTHER ITEMS

NECESSARY TO PROVIDE LETTERKENNY ARMY DEPOT WITH CLOTHING RENTAL, CLOTHING

REPAIR, CLEANING, DUMP CONTAINERS AND LAUNDRY SERVICES IN ACCORDANCE WITH THE

TERMS AND CONDITIONS OF THE PERFORMANCE WORK STATEMENT. BLASTER SUITS ARE

GOVERNMENT OWNED AND THE LAUNDERING STANDARDS ARE OUTLINED IN THE PWS.

BLASTER SUITS MUST BE KEPT SEPARATE FROM OTHER ITEMS DUE TO THE POTENTIAL FOR

CLIN 3001

ESTIMATED QUANTITIES ARE 240/PER WEEK. GOVERNMENT OWNED WILL REQUIRE CLEANING

SERVICE ONCE PER WEEK. THE CONTRACTOR SHALL FURNISH ALL

NECESSARY LABOR, TRANSPORTATION, MATERIALS, QUALITY CONTROL, PICKUP AND DELIVERY

AND OTHER ITEMS NECESSARY TO PROVIDE LETTERKENNY ARMY DEPOT WITH CLOTHING

RENTAL, CLOTHING REPAIR, CLEANING, DUMP CONTAINERS AND LAUNDRY SERVICES IN

ACCORDANCE WITH THE TERMS AND CONDITIONS OF THE PERFORMANCE WORK STATEMENT.

BLASTER SUITS ARE GOVERNMENT OWNED AND THE LAUNDERING STANDARDS ARE OUTLINED

SERVICE ONCE PER WEEK. THE CONTRACTOR SHALL FURNISH ALL NECESSARY LABOR,

TRANSPORTATION, MATERIALS, QUALITY CONTROL, PICKUP AND DELIVERY AND OTHER ITEMS

NECESSARY TO PROVIDE LETTERKENNY ARMY DEPOT WITH CLOTHING RENTAL, CLOTHING

REPAIR, CLEANING, DUMP CONTAINERS AND LAUNDRY SERVICES IN ACCORDANCE WITH THE

TERMS AND CONDITIONS OF THE PERFORMANCE WORK STATEMENT. BLASTER SUITS ARE

GOVERNMENT OWNED AND THE LAUNDERING STANDARDS ARE OUTLINED IN THE PWS.

BLASTER SUITS MUST BE KEPT SEPARATE FROM OTHER ITEMS DUE TO THE POTENTIAL FOR

CLIN 4001

ESTIMATED QUANTITIES ARE 240/PER WEEK. GOVERNMENT OWNED WILL REQUIRE CLEANING

SERVICE ONCE PER WEEK. THE CONTRACTOR SHALL FURNISH ALL

NECESSARY LABOR, TRANSPORTATION, MATERIALS, QUALITY CONTROL, PICKUP AND DELIVERY

AND OTHER ITEMS NECESSARY TO PROVIDE LETTERKENNY ARMY DEPOT WITH CLOTHING

RENTAL, CLOTHING REPAIR, CLEANING, DUMP CONTAINERS AND LAUNDRY SERVICES IN

ACCORDANCE WITH THE TERMS AND CONDITIONS OF THE PERFORMANCE WORK STATEMENT.

BLASTER SUITS ARE GOVERNMENT OWNED AND THE LAUNDERING STANDARDS ARE OUTLINED

SERVICE ONCE PER WEEK. THE CONTRACTOR SHALL FURNISH ALL NECESSARY LABOR,

TRANSPORTATION, MATERIALS, QUALITY CONTROL, PICKUP AND DELIVERY AND OTHER ITEMS

NECESSARY TO PROVIDE LETTERKENNY ARMY DEPOT WITH CLOTHING RENTAL, CLOTHING

REPAIR, CLEANING, DUMP CONTAINERS AND LAUNDRY SERVICES IN ACCORDANCE WITH THE

TERMS AND CONDITIONS OF THE PERFORMANCE WORK STATEMENT. BLASTER SUITS ARE

GOVERNMENT OWNED AND THE LAUNDERING STANDARDS ARE OUTLINED IN THE PWS.

BLASTER SUITS MUST BE KEPT SEPARATE FROM OTHER ITEMS DUE TO THE POTENTIAL FOR

The following have been added by full text:

QUESTION & ANSWERS

Q1) Government-owned blaster suits – We do understand the responsibility of cleaning the suits, but without any idea as to what the suits are (manufacturer? Fabric content? Cleaning instructions?, etc.), it would be extremely difficult to provide a price for something we’ve never seen nor read any descriptive washing instructions for? You provided generic washing instructions for Blasting suits on page 25 of the amendment, but they are not specific.

Instead, it describes wash instructions for suits of 3 different types of fabric content (blend, nylon, or cotton) with different processing instructions for each. One of them (nylon/cotton blend) calls for handwashing to clean the items, and drip-dried hanging to dry them. I’m not sure, but I don’t know of any industrial launderers whose washing and drying equipment allow for a process of extremely labor intensive handwashing of any garments (it’s just not done) nor are we equipped with drying rooms for hanging items to drip dry…those kinds of primitive garment care are for home wash items as opposed to industrial laundry processes. So, in order to assure that the tasks to process the blaster suits do not call for hand washing of the garments, could you either provide the manufacturers specification/instructions for cleaning the suit purchased, or the name/manufacturer of the blaster suit itself so we can obtain the care instructions in advance for quotation purposes – basically, because the government is providing the garment, we need to know what it is that we are processing to give a fair quote. It is not enough to just say Blaster suits, as you know by now, as they are not that common, and their proper care is important to figure a cost for processing them. Please advise.

A2) Coveralls are ALC brand. Model numbers are 41420 thru 41427 depending on size.

Washing instructions:

-Hand wash w/ mild detergent -Drip dry

Please see revision to PWS paragraph 5.4.4 Laundering Blaster Suits/Coveralls.

Q2) Most significantly, we have been advised (as recently as yesterday) by our manufacturer sources that, due to the current pandemic/COVID-related issues that have affected us all, the lead time necessary to manufacture the garments required to supply LEAD with the required clothing has become 16-20 weeks at a minimum. As a matter of fact, the only commitment for delivery from our source manufacturers has been lead times described this way -- “hopefully within 20 weeks, but figure 4-5 months lead time at a minimum” for the garments required for this activity (Berry- compliant, Flame-resistant garments). In light of the current environment for supplying these garments from the very few sources manufacturers for them, installation of the garments when awarded a contract may not take place for another 6 months at the earliest. If a contract is awarded, can or will the period of performance be adjusted for the contract term to reflect more accurate dates that coincide with when the garments become available? In other words, if a 1-year contract is awarded with 4 options as is customary and proposed, could the period of performance and contract term be delayed to start 6 months later (so that our bid is still based on receiving 52 weeks/year of revenue – especially if the goods needed to satisfy the contract would not be available for another 6 months)? How would the government address this situation, knowing that you are requesting items that cannot be supplied for at least 5-6 months from now, to follow up on a current contract that cannot be extended?

A2) The follow on contract (base year with four option years) will have an effective date and period of performance to align with the lead time it will take to obtain the uniforms necessary to satisfy the requirement. The government is currently working a course of action to ensure services continue until the follow on contract is effective.

The following have been modified:

PWS

Performance of Work Statement (PWS) For

Clothing Rental & Laundering of Personal PPE or Uniforms

1.0 General

The purpose of the protective clothing outlined in this statement is to provide protection against flammable hazards in accordance with OSHA standards. These hazards have been identified within an industrial working environment for which LEAD/Letterkenny Munitions Center (LEMC) has the responsibility to protect its employee's against such hazards to include but are not limited to arc flash, weld splatter, chemical hazards, and heavy metal exposure during abrasive blasting operations which are routine operations at LEAD/LEMC. Every effort shall be made to mitigate any negative impact on productivity.

1.1 Scope:

The contractor shall furnish all necessary labor, transportation, materials, quality control, pickup and delivery service and other items necessary to provide Letterkenny Army Depot/LEMC with clothing rental, clothing repair, cleaning, dump containers, and laundry bag services in accordance with the terms and conditions as defined in this PWS. Contractor is responsible to keep the blast suits separate, Flame Resistant from all other clothing due to potential heavy metal contaminants on dirty blast suits. Contractor shall also maintain a weekly delivery schedule and be able to provide emergency, same-day service when required by Letterkenny Army Depot/LEMC.

1.2 Background: OSHA’s primary personal protective equipment standards are outlined in Title 29 of the Code of Federal Regulations (CFLAME RESISTANT), Part 1910, such as; 1910.252 Welding, Cutting, and Brazing General Requirements, 1910.335 Electrical Safeguards for Personnel Protection, 1910.1025 Lead, 1910.1026 Chromium (VI), and 1910.1027 Cadmium. In each of these OSHA standards, it clearly states that the employer shall identify and assess its workplace to determine if hazards are present that require the use of personal protective equipment. If such hazards are present, the employer shall select protective equipment and require workers to use it, communicate its protective equipment selection decisions to its workers, and select personal protective equipment that properly fits workers.

1.3 Period of Performance (PoP): The Period of Performance shall be one Base Year of 12 months and 4 additional years. The Period of Performance reads as follows:

1.3.1 Base Year: 1 April 2022 to 31 March 2023

1.3.2 Option Year One: 1 April 2023 to 31 March 2024

1.3.3 Option Year Two: 1 April 2024 to 31 March 2025

1.3.4 Option Year Three: 1 April 2025 to 31 March 2026

1.3.5 Option Year Four: 1 April 2026 to 31 March 2027

1.4 General Information:

1.4.1 Quality Assurance (QA): The Government Contract Officer Representative (COR) shall provide surveillance and evaluate the contractor’s performance under this contract in accordance with the performance standards. The COR shall relay any deficiencies of the contract to the Contracting Officer (KO). The COR is not empowered to make any contract or to authorize any contractual changes on the Government’s behalf. The contractor shall refer any changes they deem may affect contract price, terms, or conditions to the KO for action. The KO shall ensure performance of all necessary actions for effective contracting, ensure compliance with the contract terms, and shall safeguard the interests of the United States in the contractual relationship. The KO shall also assure that the contractor receives impartial, fair, and equitable treatment under this contract. The KO is ultimately responsible for the final determination of the adequacy of the contractor’s performance.

1.4.2 Recognized Holidays: The following are recognized US holidays. The contractor does not perform the services on these days:

1.4.3.1 New Year’s Day: January 1st

1.4.3.2 Martin Luther King, Jr.’s Birthday: Third Monday in January

1.4.3.3 President’s Day: Third Monday in February

1.4.3.4 Memorial Day: Last Monday in May

1.4.3.5 Juneteenth: June 19th

1.4.3.6 Independence Day: July 4th

1.4.3.7 Labor Day: First Monday in September

1.4.3.8 Columbus Day: Second Monday of October

1.4.3.9 Veteran’s Day: November 11th

1.4.3.10 Thanksgiving Day: Fourth Thursday in November

1.4.3.11 Christmas Day: 25th of December

1.4.3.11 Please Note: When an observed holiday falls on a Tuesday or Thursday, the Depot regularly schedules a closure on the corresponding Monday or Friday.

1.4.4 Place and Performance of Services: The contractor shall provide services between the hours of 5:00AM/0700 and 1530 3:30PM (i.e., Monday through Thursday/Friday), except on recognized US holidays or when the Government facility/installation is closed due to local or national emergencies, administrative closings, or similar Government-directed facility/installation closings. Performance shall be at buildings listed, see Exhibit 2. The contractor shall at all times maintain an adequate work force for the uninterrupted performance of all tasks defined within this PWS when the Government facility/installation is not closed for the above reasons. When hiring personnel, the contractor shall keep in mind that the stability and continuity of the work force are essential.

1.4.5 Security Requirements: Contractor and all associated sub-contractor’s employees shall comply with applicable installation, facility and area commander installation/facility access and local security policies and procedures (provided by government representative). The contractor shall also provide all information required for background checks to meet installation access requirements to be accomplished by installation Provost Marshal Office, Director of Risk Management or Security Office. Contractor workforce shall comply with all personal identity verification requirements as directed by DOD, HQDA and/or local policy. Should the Force Protection Condition (FPCON) change, the Government may require changes in contractor security matters or processes.

1.4.5.1 Physical Security: The contractor shall safeguard all Government property provided for contractor use. At the close of each work period, Government facilities, equipment and materials shall be secured.

1.4.5.2 Information Security: CELLULAR PHONES AND ELECTRONIC DEVICES, The Contractor shall comply with the Depot’s policy regarding the use of Cellular Phones and Electronic Devices. The Contractor and Contractor employees shall not use electronic communication devices and accessories while on duty in safety sensitive areas.

Electronic communication devices include cellular phones/smart watches (including those with hands-free devices), scanner, walkie-talkie, tape recorder, Compact Disc (CD) player or cassette/walkman, radio, MP3 Player, boom-box, game-boy and other electronic device used to transmit, receive or record information. The safety sensitive areas shall be identified by the Project Manager or COR at the Kick-off meeting.

1.4.5.3 AT Level 1 Awareness Training: All contractor employees, to included subcontractor employees, requiring access to Army Installations, facilities, and controlled access areas shall complete AT Level 1 awareness training within 30 calendar days after contract start date and within 30 calendar days of new employees commencing performance. The contractor shall submit certificates of completion for each affected contractor employee and subcontractor employee, to the COR or to the contracting officer, if a COR is not assigned, within 15 calendar days after completion of training. AT Level 1 Awareness Training is available on the Letterkenny Army Depot homepage

– www.lead.army.mil.

1.4.5.4 iWATCH Training: The contractor and all associated sub-contractors with an area of performance within an Army-controlled installation, facilities or area shall brief all employees on the local iWATCH program. This local developed training shall be used to inform employees of the types of behavior to watch for and instruct employees to report suspicious activity to the COR or contracting officer. This training shall be completed within 30 calendar days of contract award and within 30 calendar days of new employees commencing performance. The contractor shall report completion for each affected contractor employee and subcontractor employee, to the COR or to the contracting officer, if a COR is not assigned, within 15 calendar days after completion of training. iWATCH training is available on the Letterkenny Army Depot homepage – www.lead.army.mil.

1.4.5.5 OPSEC Training: Per AR 530-1, Operations Security, new contractor employees and associated sub-contractor employees shall complete Level I OPSEC training within 30 calendar days of their reporting for duty and annually thereafter. The contractor shall submit certificates of completion for each affected contractor employee and subcontractor employee, to the COR or to the contracting officer, if a COR is not assigned, within 15 calendar days after completion of training. Level 1 OPSEC training is available on the Letterkenny Army Depot homepage – www.lead.army.mil.

1.4.7 Special Qualifications: None

1.4.8 Post Award Conference/Periodic Progress Meetings: The contractor agrees to attend any post award conference convened by the KO in accordance with Federal Acquisition Regulations Subpart 42.5. The KO, Contracting Officer’s Representative (COR), and other Government personnel, as appropriate, may meet periodically with the contractor to review the contactor’s performance. At these meetings, the Contacting Officer shall apprise the contractor of how the Government views the contractor’s performance and the contractor shall apprise the Government of problems, if any, being experienced.

The contractor shall resolve outstanding issues raised by the Government. Contractor attendance at these meetings shall be at no additional cost to the Government.

1.4.9 Contract Manager (CM): The contactor shall provide a CM who shall ensure performance under this contract.

The name of this person, and an alternate who shall act for the contractor when the CM is absent, shall be designated in writing to the KO. The CM or alternate shall have full authority to act for the contractor on all contract matters relating to daily operation of this contract.

1.4.10 Identification of Contractor Employees: All contact personnel attending meetings, answering Government telephones and working in other situations where their contractor status is not obvious to third parties are required to identify themselves as such to avoid creating an impression in the minds of members of the public that they are Government officials. The contractor shall also ensure that all documents or reports produced by contractor personnel are suitably marked as contractor products or that contractor participation is appropriately disclosed.

1.4.11 Organizational Conflicts of Interest (OCI): The contractor and subcontractor personnel performing work under this contract may receive, have access to or participate in the development of proprietary or source selection information (e.g., cost or pricing information, budget information or analyses, specifications or work statements, etc.) or perform evaluation services which may create a current or subsequent OCIs, as defined in FAR Subpart 9.5.

The contractor shall notify the KO immediately whenever it becomes aware that such access or participation may result in any actual or potential OCI and shall promptly submit a plan to the KO to avoid or mitigate any such OCI.

The contractor’s mitigation plan shall be determined to be acceptable solely at the discretion of the KO and in the event the KO unilaterally determines that any such OCI cannot be satisfactorily avoided or mitigated, the KO may affect other remedies as he or she deems necessary, including prohibiting the contractor from participation in subsequent contracted requirements which may be affected by the OCI.

2.0 Definitions and Acronyms

2.1.1 CONTRACTOR. A supplier or vendor awarded a contract to provide specific supplies or service to the government. The term used in this contract refers to the prime vendor.

2.1.2 CONTRACTING OFFICER (KO). A person with authority to enter into, administer, and or terminate contracts, and make related determinations and findings on behalf of the government. Note: The only individual who can legally bind the government.

2.1.3 CONTRACTING OFFICER'S REPRESENTATIVE (COR). An employee of the U.S. Government designated by the KO to monitor contractor performance. Such appointment shall be in writing and shall state the scope of authority and limitations. This individual has authority to provide technical direction to the Contractor as long as that direction is within the scope of the contract, does not constitute a change, and has no funding implications. This individual does NOT have authority to change the terms and conditions of the contract.

2.1.4 DEFECTIVE SERVICE. A service output that does not meet the standard of performance associated with the Performance Work Statement.

2.1.5 DELIVERABLE. Anything that can be physically delivered and includes non-manufactured things such as meeting minutes or reports.

2.1.6 KEY PERSONNEL. Contractor personnel that are evaluated in a source selection process and that may be required to be used in the performance of a contract by the Key Personnel listed in the PWS. When key personnel are used as an evaluation factor in best value procurement, an offer can be rejected if it does not have a firm commitment from the persons that are listed in the proposal.

2.1.7 PHYSICAL SECURITY. Actions that prevent the loss or damage of Government property.

2.1.8 QUALITY ASSURANCE. The government procedures to verify that services being performed by the Contractor are performed according to acceptable standards.

2.1.9 QUALITY ASSURANCE SURVEILLANCE PLAN (QASP). An organized written document specifying the surveillance methodology to be used for surveillance of contractor performance.

2.1.10 QUALITY CONTROL. All necessary measures taken by the Contractor to assure that the quality of an end product or service shall meet contract requirements.

2.1.11 SUBCONTRACTOR. One that enters into a contract with a prime contractor. The Government does not have privity of the contract with the subcontractor.

2.1.12 WORK DAY. The number of hours per day the Contractor provides services in accordance with the contract.

2.1.13 WORK WEEK. Monday through Friday, unless specified otherwise.

2.1.14 BULK FR COVERALLS. Refers to a Group or Mass of CFR, OSHA or NFPA authorized Fire Resistant Coveralls (FR) chemically treated for protection against electrical, open flames and extreme heat and other industrial hazards. Bulk FR Coveralls will be furnished by the government and serviced by the contractor.

2.1.15 FR COVERALLS. Refers to a CFR, OSHA or NFPA authorized Fire Resistant/Retardant (FR) Coveralls chemically treated for protection against electrical, open flames and extreme heat and other industrial hazards.

2.1.16 BLASTER SUITS. Refers to a CFR, OSHA or NFPA authorized Blast Protective Suit used for sand blasting for protection against abrasive and rebound during removal of blast media and/or other hazardous materials from primarily metal surfaces. The blast suits are to be furnished by the government and serviced by the contractor.

2.1.17 UNIFORM. Refers to a protective uniform/garment, either a pant and shirt, coveralls or blast suit used to identify and/or protect a worker from elements.

2.1.18 CLOTHING Refers to a garment such as shirt and pants, coveralls and blaster suits.

2.2 ACRONYMS

AFARS Army Federal Acquisition Regulation Supplement AR Army Regulation CFR Code of Federal Regulations CONUS Continental United States (excludes Alaska and Hawaii) COR Contracting Officer Representative COTS Commercial-Off-the-Shelf DA Department of the Army DD250 Department of Defense Form 250 (Receiving Report) DD254 Department of Defense Contract Security Requirement List DFARS Defense Federal Acquisition Regulation Supplement DOD Department of Defense FAR Federal Acquisition Regulation KO Contracting Officer

OCI Organizational Conflict of Interest ODC Other Direct Costs PIPO Phase In/Phase Out POC Point of Contact PRS Performance Requirements Summary PWS Performance Work Statement QA Quality Assurance QAP Quality Assurance Program QASP Quality Assurance Surveillance Plan QC Quality Control QCP Quality Control Program TE Technical Exhibit

3.0 Government Furnished Property, Material, Equipment and Services (GFP/M/E/S): The Government shall provide the facilities, equipment, materials, and/or services listed below:

3.1 Facilities: The Government shall furnish the necessary workspace for the contractor staff to provide the support outlined in this PWS. This refers to a location for the service to be provided, such as uniform delivery and drop off locations.

3.2 Equipment: Blaster Suits will be provided by the government for the contractor to service. The Government will provide the blaster suits for cleaning services and any torn, damaged or unserviceable suits will be replaced by the Government not the contractor.

3.3 Materials: Labels required for complying with this document and the delivery schedule.

3.4 Services: Labeling (Name Tagging) of individual Shirts, Pants, Coveralls and Blast Suits as prescribed. The Contractor must identify by name for each employee being serviced to include all government furnished uniforms/garments.

3.5 Utilities: NONE

4.0 Contractor Furnished Property, Materials, Equipment (CFP/M/E):

4.1 General: Except for those items specifically stated to be Government-Furnished in Paragraph 3.0, the contractor shall furnish everything required to perform these services as indicated in Paragraph 1.1.

4.1.1 The government shall not be obligated to pay for any services or materials, which have not been rendered due to contractor delays or error. Nor shall the government be obligated to pay for any unacceptable services or materials, which have been returned to the contractor due to poor unserviceable quality.

4.2 The Quality Assurance Plan (QASP) describes specific details on authority and contractor responsibilities in relation to the contractor furnished property, materials and equipment for performance plan guidelines.

5.0 REQUIREMENTS:

5.1 RENTAL ITEMS - The contractor shall ensure that each Letterkenny Army Depot employee who is exposed to hazards of flames, chemicals, abrasive blast media, or electric arc do Not wear uniforms or coveralls that, when exposed could increase the extent of injury that would be sustained by the employee. The contractor shall contact the COR to replacing unserviceable uniforms or coveralls to reduce exposures to such hazards in order to prevent injuries.

5.1.2 The contractor shall provide technical data for clothing that meets key design and operation features that can be compared and contrasted with those of a comparison unit.

5.1.3 CLOTHING STANDARDS - Clothing shall be new when the base contract begins and if still serviceable may remain in place if the option year is exercised. All clothing shall meet all OSHA Standard for an Industrial Type & Equipment Maintenance work environments. The clothing shall prevent excessive exposure to flames, chemicals and other skin hazards directly or indirectly related to an industrial type environment.

5.1.4 MATERIAL RATING - Physical characteristics of fabric must have a Flame Resistant Clothing (FRC) rating of (8.4) or higher. FLAME RESISTANT uniforms and coveralls shall have a Flame Resistant Clothing (FLAME RESISTANT) rating of (8.0) or higher. Thermal protective characteristics of the fabric shall meet Hazard Category

II (2).

5.1.5 CLEANING AND REPAIR - The contractor shall furnish, provide fit, launder and repair of industrial type protective work clothing. The contractor is to provide cleaning services as specified within individual line items to restore clothing to a clean and serviceable condition. Clothing shall be returned free from dirt, stains, and wrinkles in accordance with the standards of the industry. All stains must be removed due to possibility of hazards. All pants, shirts and coveralls shall be delivered on hangers. The contractor is responsible during the cleaning process to effect routine repairs to clothing i.e., replacement of buttons, repair of zippers, seams, etc. The repair of clothing shall be made at the time of laundering service at No additional cost to the government. If it is deemed that clothing is no longer repairable, then the contractor is to replace the clothing with new. LEAD/LEMC shall replace bulk Coveralls owned by LEAD/LEMC.

5.1.6 UNIFORM TAGS AND DECREASE TICKETS – The contractor shall provide the COR with Return Garment Uniform Service Tags to identify which identify uniforms requiring service or returns. The contractor shall also provide the COR with Uniform Decrease Tickets to receipt of rental uniforms that were returned to the contractor for removal from the contractor’s weekly invoices.

5.2 Welder, Electrician & Dip Tank Employee Uniform Requirements:

5.2.1 Work Shirt & Pant Uniform

5.2.2 UNIFORM STANDARD - The work Shirt and Pant uniform shall consist of long pants and long sleeve shirt.

The entire uniform shall be designated as Flame Resistant and Arc-Rated for Hazard/Risk Category II, which shall meet and comply with ASTM F1506, NFPA 2112, and NFPA 70Estandards.

5.2.3 SHIRTS - The contractor shall supply long sleeve SHIRTS without pockets (or pockets shall be sewn shut) and button or snap at wrist. The contractor shall label each shirt and have a Name Tag sewn on each shirt. The contractor shall launder and repair rented shirts as specified. The contractor shall provide all labor, material, services, facilities and equipment to provide clothing rental, cleaning and repair in accordance with ASTM 1449, NFPA 2113, and the delivery order. Each area requires that a sufficient number of shirts provided to the area specified, to accommodate the availability of estimated number of personnel serviced at the frequencies of Change indicated.

5.2.4 PANTS - The contractor shall supply PANTS that are to be long legged, zipper fly and contain pockets. The contractor shall launder and repair rented pants as specified. The contractor shall provide all labor, material, services, facilities and equipment to provide clothing rental, cleaning and repair, in accordance with ASTM 1449, NFPA 2113, and the delivery order.

5.2.5 Delivery of Shirts & Pants - The contractor shall launder and repair all rented work Shirts & Pants as indicated in the delivery schedule. The contractor is responsible for furnishing the prescribed Shirts & Pants to the specified areas in each line item. Each area requires that a sufficient number of Pants provided to the area specified, to accommodate the availability of estimated number of personnel serviced at the frequencies of Change indicated.

5.2.6 Packaging of Shirts & Pants - The Shirts and Pants shall be bundled together with tie on hangers and returned to the respective work sites in accordance with the delivery order. Eight or less (8) Shirts per Bundle (or tied together on hangers). Eight or less (8) Pants per Bundle (or tied together on hangers).

5.3 Welder, Electrician & Dip Tank Employee Coverall Requirements

5.3.1 COVERALLS Standard Rental - Coveralls shall be new and all clothing shall be Flame Resistant and Arc- Rated for Hazard/Risk Category II which shall meet and further be in compliance with ASTM F1506, NFPA 2112, and NFPA 70Estandards. Coveralls shall be washed in accordance with ASTM 1449 and NFPA 2113 to prevent the drop of protection values. Any other washing method could result in the clothing no longer protecting personnel from hazards at the worksite. Every effort should be made to mitigate any negative impact on employee’s productivity.

5.3.2 Coverall Laundry & Repair - The contractor shall launder and repair all rented coveralls as indicated in the delivery schedule. The contractor is responsible for furnishing these coveralls to the specified areas in each line item. Each area requires that a sufficient number of coveralls be provided to the area specified, to accommodate the availability of coveralls for an estimated number of personnel serviced at the frequencies of Change indicated.

5.3.3 Coverall Packing - These coveralls shall be in bundles and returned to the respective work sites in accordance with the delivery order. When government owned clothing is no longer repairable, then the contractor shall immediately notify the Contracting Officer’s Representative (COR) or the Contracting Officer (KO). Eight or less

(8) Coveralls per Bundle (or tied together on hangers).

5.4 Blast Protection Suit/Coverall and Uniform:

5.4.1 Blast Suit/Coverall - The government has the option to rent and/or purchase its own coveralls. Blast Suits will be provided by the government for the contractor to service. The contractor shall launder and service either government owned or rented blast suits/coveralls per the requirements of this contract. This option remains open to ensure there are No stoppages in service during supply shortages. All blast suits/coveralls will be and designed specifically for heavy abrasive blasting operations. All blast suits/coveralls shall prevent or reduce dust particles penetration per OSHA and per 29 CFR 1910.134(a) specifications.

5.4.2 Collection and Handling - Collection bins for dirty blaster’s suits/coveralls shall be equipped with a bin liner and closable lid. This is to prevent or reduce potentially contaminated blast dust becoming airborne. All dirty blasters suits/coveralls shall be handled as if they were contaminated with lead cadmium, or chromium dust.

5.4.3 Blast Protection - All uniforms and blasting suits/coveralls will be in accordance with 29 CFR 1910.94 (a) (5) PPE for Abrasive Blasting Operations. (Note: Potential exposure to dust and air contaminants is the primary health hazard associated with abrasive blasting. Abrasive blasting can generate large quantities of dust that can contain high levels of toxic air contaminants. This means that employees can have exposures to multiple air contaminants from both the abrasive and the surface being blasted. The government will provide blast suits/coveralls that prevent or reduce dust particle penetration per, OSHA and per 29 CFR 1910.134(a) specifications. The contractor shall not alter the blaster suits in any way that would change or reduce levels of protection as required by ASTM 1449 or NFPA 2113 regulations.

5.4.4 Laundering Blast Suits/Coverall - Shall be washed in accordance with ASTM 1449 and NFPA 2113 to prevent the drop of protection values. The contractor shall perform the required cleaning, alterations and dry cleaning operations in accordance with the original manufacturer’s specifications/guidelines as stated in Attachment 1- Government Owned Blaster Suit Laundering Guidelines. All Blaster Suits/Coveralls shall be returned to the government in serviceable condition. The contractor shall pay close attention to the manufacturer’s recommended washing methods, any other method could result in the clothing no longer protecting personnel from hazards at the worksite. Every effort should be made to mitigate any negative impact on employee’s productivity. Coveralls are ALC brand. Model numbers are 41420 thru 41427 depending on size. Washing instructions: -Hand wash w/ mild detergent,-Drip dry.

5.4.5 Service and Repair of Blast Suits/Coveralls - The contractor shall launder and repair blast coveralls per the delivery schedule. The contractor is responsible for delivering government owned blaster suits/coveralls to the specified areas in each line item. Each area requires that a sufficient number of suits/coveralls be provided to the area specified to accommodate the availability of coveralls for the estimated personnel serviced at the frequencies of Change indicated. Coveralls shall be bundled and returned to the respective work sites in accordance with the delivery order. Eight (8) Blast Suits/Coveralls per Bundle (or tied together on hangers).

5.4.6 Replacement of Blast Suit/Coverall – If the blast suits/coveralls are no longer in serviceable condition for repairs, then the contractor shall immediately notify the Contracting Officer’s Representative (COR) or the Contracting Officer via email for replacements. The contractor shall provide the COR with quantity, sizes and location of blaster suits/coveralls that are unserviceable needing replaced due to normal wear and tear and/or loss.

The government will replace unserviceable or lost blaster suits/coveralls as needed. The contractor shall reimburse the government for any lost or damaged government owned blaster suits/coveralls caused by the contractor while providing laundry services. At No time shall the contractor replace any garments without prior authorization or notification from the government.

5.5 Bath Towels & Wash Cloths

5.5.1 The contractor shall provide Bath Towels & Wash Cloths to employees who work with hazardous chemicals and materials to prevent or reduce effects of poisonings or injuries caused by contamination or cross contamination.

5.5.2 Bath Towels & Wash Cloths shall be new and in accordance with the provisions of the solicitation for the performance period shown. Worn out, damaged or discolored bath towels & wash cloths shall be replaced with new ones. Bath Towels & Wash Cloths shall be the color “white”. They shall be cotton and of a standard bath size for bathing purposes and contains sufficient quantity for each individual and line item. Standard Towel size shall be 42 1/2 inches by 23 inches. Standard Washcloth size shall be 12 inches by 12 inches.

5.5.3 Each designated area requires that a sufficient number of Wash Cloths and Bath Towels be provided to accommodate the availability of coveralls for the estimated personnel serviced at the frequencies of Change indicated. The contractor shall provide an adequate bath towel and wash cloth inventory at each shift. The Wash Cloths and Bath Towels shall be packaged in bundles and bundles returned to the respective work sites in accordance with the delivery order. One Wash Cloth and one Bath Towel are wrapped together and ten (10) of the wrapped parcels consist of a bundle.

5.6 Laundry Bags

5.6.1 Laundry Bags shall be provided by the contractor at no charge to the government. The contractor shall provide laundry bags in accordance with the individual line items. The bags shall be made of a cloth material and have a drawstring closure. It shall be the contractor’s responsibility to provide the correct size laundry bags to accommodate the work area designated on the line item. The bags shall be used to hold individual’s dirty laundry until the contractor picks it up for laundry service.

5.6.2 Replacement of worn laundry bags shall be responsibility of the contractor at no additional charge to the Government.

5.7 Bulk Coveralls (Gov. Furnished/Owned)

5.7.1 The Contractor shall launder and repair Government Furnished/Owned coveralls. The contractor is responsible for providing these coveralls to the specified areas in each line item. Each area requires that a sufficient number of coveralls be provided to the area specified to accommodate the availability of coveralls for the estimated personnel serviced at the frequencies of Change indicated. Coveralls shall be packaged in bundles on hangers with ties and bundles returned to the respective work sites in accordance with the delivery order. Government owned coveralls shall not have name tags.

5.7.2 If repair of Government Owned clothing is no longer in serviceable condition for repairs, then the contractor shall immediately call and/or email the Contracting Officer’s Representative (COR) or the Contracting Officer.

5.8 Dump Containers

5.8.1 The Contractor has the responsibility of delivering dump containers to the work sites. The containers shall be sturdy enough for industrial manufacturing facility and shall comply with all applicable publications listed in 6.0.

The containers shall be used to house the dirty clothing until the contractor picks it up to be laundered. It is the contractor's responsibility to furnish the dump containers and to remove them upon expiration of the contract term.

It is the contractor's responsibility to provide a suitable size dump container for each work area.

5.8.2 Containers which collect blaster coveralls shall be labeled in accordance with 29 CFR 1910.1025, 29 CFR 1910.1026, and 29 CFR 1910.1027. The government shall provide the required labels.

6.0 SERVICES

6.1 SIZING AND FIT- Sizing and Fit of rental only uniforms, coveralls and blast suits for personnel shall be the responsibility of the contractor. Sizing shall be accomplished in such a manner as to assure the availability of properly fitted clothing in accordance with the terms of the contract and each individual line item. Letterkenny shall provide the information if an employee is on 2nd or 3rd shift that needs clothing. Site visit(s) may be required and subsequent visit(s) shall be required as new employees are hired. It is anticipated that new employees shall be hired as replacements for current employees and should not significantly impact the overall number of garments required during the life of the contract.

6.1.2 CLEANING/REPAIR OF GOVERNMENT OWNED CLOTHING - Line Items identified as “Launder, and Repair” are Government Owned clothing and the contractor shall be required to perform laundry and repair service as specified within individual line items to restore clothing to clean condition. Clothing shall be returned free from dirt, stains and wrinkles in accordance with the standards of the industry.

6.1.3 REPLACEMENT-The Contractor shall replace uniforms when they become worn out or unfit for use through normal wear and tear, shrinkage or when a size change is necessary for a safe and comfortable fit. Lost uniforms and coveralls or damages to them outside the scope of wear and tear shall be replaced at government expense.

6.1.4 REQUIRED QTY-The following rental clothing is required: Uniforms and Coveralls (8 Sets/or less of Shirts and Pants, 8 or less coveralls per employee and 8 sets of Blast Suit/Coverall for Blasters) to be rented and laundered weekly. Upon request, additional Blast suits/coverall can be provided to prevent contamination or reduce chances of cross-contamination.

6.1.5 CHANGE OF QTY- The exact quantity of uniforms to be serviced is subject to change depending upon the need of LEAD/LEMC workload. It is essential the contractor maintain a degree of flexibility to meet any increase or decrease in uniform services as LEAD/LEMC remanufacturing efforts develop. If the number of required protective garments should decrease due to an unforeseen reduction in personnel, the excess garments shall be returned to the vendor’s inventory system. The government shall not assume payment for excess garments and no buy-out clause shall be extended to the vendor. If the number of protective garments should increase due to an unforeseen augmentation of personnel or a change in uniform requirements for specific positions, then the contractor shall be required to meet those increases in demand.

6.1.6 CLOTHING COLOR - The color of the clothing shall be the manufacturers/supplier provided color unless otherwise indicated (Preferably, Dark Blue in Color).

6.1.7 NAME TAGS-The contractor shall be responsible to supply the labels and to neatly label the uniforms with a nametag. The tag shall be a cotton material patch sewn to the pocket of shirt containing the individual’s first name with a thread stitch (preferably white or contrasting color to material).

6.1.8 DEFECTIVE ITEMS-The contractor is responsible for replacing all defective and unserviceable rental items.

The COR shall make the determination if the clothing is non-repairable and it shall be the contractors responsibility to replace with new (This includes the shrinkage due to over washing or drying of uniforms, coveralls and blast suits).

6.1.9 DELIVERY AND PICK-UP -The contractor is responsible for delivery of clean clothing and pickup of dirty clothing. Delivery and Pick-up shall be accomplished during normal duty hours as specified in 1.4.4. The contractor shall be responsible for ensuring that all quantities of clothing and deliveries are maintained to each building location and shall have all forms properly signed for and dated by the COR. Clothing and linen articles received by the contractor shall be individually inspected for condition of serviceability.

6.1.10 TURNAROUND SCHEDULE AND GEOGRAPHIC AVAILABILITY - Service turnaround (the time to pick-up, service and deliver uniforms back to their assigned locations) shall not exceed three business days. The contractor shall create and maintain a weekly delivery/pick-up schedule (typically, twice-weekly runs are most effective).