Solicitation_Attachment_0008_-_TDPL.pdf

02/12/2016 AMCOM MAINTENANCE AND OVERHAUL TDPL PAGE 1

NEEDS REVIEW REPORT

PRID : CB350-1

NSN : 4810-01-096-1056

DMWR : DMWR-1-1560-293

PRON : AX6M0171AX

IMMC 4 ID IS EMPTY

IMMC 4 DATE COMPLETE IS EMPTY

ENVIRONMENTAL ID IS EMPTY

ENVIRONMENTAL DATE COMPLETE IS EMPTY

COMPETITION MGT OFC ID IS EMPTY

COMPETITION MGT OFC DATE COMPLETE IS EMPTY

ITEMS NEEDING REVIEW OR REVALIDATION:

PT 78286 13117-1 NO SOURCE INFORMATION

PT 16780 22178 NO SOURCE INFORMATION

PT 16780 25754 NO SOURCE INFORMATION

PT 16780 25755 NO SOURCE INFORMATION

PT 16780 25756 NO SOURCE INFORMATION

PT 16780 25757 NO SOURCE INFORMATION

PT 16780 25758 NO SOURCE INFORMATION

PT 16780 25759 NO SOURCE INFORMATION

PT 16780 26360 NO SOURCE INFORMATION

PT 16780 32019-3 NO SOURCE INFORMATION

NS 78286 4810-01-096-1056 NO SOURCE INFORMATION

PT 16780 90014-014 NO SOURCE INFORMATION

PT 16780 91502-1 NO SOURCE INFORMATION

CP 81343 M83461/1-011 NO SOURCE INFORMATION

CP 81343 M83461/1-215 NO SOURCE INFORMATION

DEFICIENT DOCUMENTS:

02/12/2016 AMCOM MAINTENANCE AND OVERHAUL TDPL PAGE 2

W-A-R-N-I-N-G ! THIS PACKAGE CONTAINS ITEMS WITH RESTRICTED SOURCES

NO ODS SPECIFICATIONS FOUND

W-A-R-N-I-N-G ! THIS PACKAGE CONTAINS DISTRIBUTION STATEMENTS OTHER THAN 'A'

W-A-R-N-I-N-G! PACKAGE CONTAINS TECHNICAL DATA FOR WHICH EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT

+ PRID NUMBER : CB350-1 PRON NUMBER : AX6M0171AX +

+ NSN : 4810-01-096-1056 PART NUMBER : 13117-1 +

+ DMWR NUMBER : DMWR-1-1560-293 STATUS : ROUTINE +

+ NOMENCLATURE : HYDRAULIC VALVE +

+ PVA REQD IAW AMCOM FAR CLAUSE 52.209-4723 +

+ IMMC 1 ID : rgdula IMMC 1 DATE COMPLETE : 12/07/2015 + + AVN ENGINEER DIR 1 ID : clmayha AVN ENGINEER DIR 1 DATE COMPLETE : 12/16/2015 + + AVN ENGINEER DIR 2 ID : hhernand ADEQUATE DMWR? : Y AVN ENGINEER DIR 2 DATE COMPLETE : 12/22/2015 + + STATUS ACCOUNTING ID : pbogo STATUS ACCOUNTING DATE COMPLETE : 12/23/2015 + + PACKAGING ID : msaffold PACKAGING DATE COMPLETE : 01/14/2016 + + QUALITY ID : jlstewar QUALITY DATE COMPLETE : 01/14/2016 + + SNRR/TAMMSA ID : astaggs SNRR/TAMMSA DATE COMPLETE : 12/22/2015 + + IMMC 2 ID : rgdula IMMC 2 DATE COMPLETE : 01/26/2016 + + DATA MANAGEMENT ID : cmayhall DATA MANAGEMENT DATE COMPLETE : 02/08/2016 + + TRANSPORTATION ID : tscharf TRANSPORTATION DATE COMPLETE : 01/27/2016 +

+ COMPETITION MGT OFC ID : = COMPETITION MGT OFC DATE COMPLETE : = +

+ IMMC 3 ID : rgdula IMMC 3 DATE COMPLETE : 02/08/2016 + + AVN ENGINEER DIR 3 ID : hhernand AVN ENGINEER DIR 3 DATE COMPLETE : 02/10/2016 + + BUDGET ID : rkeck BUDGET DATE COMPLETE : 02/10/2016 + + ENGINEERING ID : arose ENGINEERING DATE COMPLETE : 01/05/2016 +

+ ENVIRONMENTAL ID : = ENVIRONMENTAL DATE COMPLETE : = +

+ IMMC 4 ID : = IMMC 4 DATE COMPLETE : = +

+ ACQUISITION ID : * ACQUISITION DATE COMPLETE : * +

NOTE: '=' INDICATES REQUIRED DATA IS MISSING. '*' INDICATES MISSING DATA IS NOT MANDATORY

'N/A' INDICATES MISSING DATA IS NON-APPLICABLE.

02/12/2016 AMCOM M&O TDPL PAGE 3

5/17/2016https://amcom1.redstone.army.mil/reports/rwservlet/getjobid568559?server=repsrv

USAGE REMARKS

PRID : CB350-1

NSN : 4810-01-096-1056

DMWR : DMWR-1-1560-293

PRON : AX6M0171AX

++++++++++++++++++++++++++++++++++++++++++++++++ IMMC MANAGER +++++++++++++++++++++++++++++++++++++++++++++++ + PACKAGE IS IN SUPPORT OF THE UH-60 COMMERCIAL M&O PROGRAM. - GDULA, ROBERT H. / 256-955-69 +

+ 09 / 07-DEC-15 +

++++++++++++++++++++++++++++++++++++++ AVIATION ENGINEERING DIRECTIVE 1 +++++++++++++++++++++++++++++++++++++ + AEM SUSTAINMENT HAS VERIFIED THE CSI AND NST DATA THROUGH THE ARISE CIM DATABASE ON 12/08/ + + 2015. THIS COMPONENT IS NON CSI AND NON NST. P/N 70652-02450-109 IS THE SAME AS P/N 13117- + + 1 IAW DMWR 1-1560-293 FIG 3-3. MW. - WAGNER, MICHAEL / 256-842-1332 / 08-DEC-15 + ++++++++++++++++++++++++++++++++++++++ AVIATION ENGINEERING DIRECTIVE 2 +++++++++++++++++++++++++++++++++++++ + AEM SUSTAINMENT HAS VERIFIED THE CSI AND NST DATA THROUGH THE ARISE CIM DATABASE ON 12/08/ + + 2015. THIS COMPONENT IS NON CSI AND NON NST. P/N 70652-02450-109 IS THE SAME AS P/N 13117- + + 1 IAW DMWR 1-1560-293 FIG 3-3. MW. - WAGNER, MICHAEL / 256-842-1332 / 08-DEC-15 + +++++++++++++++++++++++++++++++++++++++++++++ STATUS ACCOUNTING +++++++++++++++++++++++++++++++++++++++++++++

+ THE FOLLOWING SPECIFICATIONS ARE CANCELLED WITH REPLACEMENTS: +

+ AMCOM-R-702-2 REPLACED BY AMRDEC-POLICY-06-04 +

+ ASTM-E1444 REPLACED BY ASTM-E1444/E1444M +

+ NCSL-Z540.1 REPLACED BY ISO-IEC-17025 & NCSL-Z540.3 +

+ MIL-C-5541 REPLACED BY MIL-DTL-5541 +

+ MIL-P-19834 REPLACED BY MIL-DTL-19834 +

+ - WOOD, MARY SHANNA / 256-313-1670 / 23-DEC-15 +

++++++++++++++++++++++++++++++++++++++++++++++++ SNRR/TAMMSA ++++++++++++++++++++++++++++++++++++++++++++++++ + PRID: CB350-1, NSN: 4810-01-096-1056, PN: 13117-1 THIS ITEM DOES NOT REQUIRE TAMMS-A - STA +

+ GGS, AMANDA C. / 256-313-2438 / 22-DEC-15 +

++++++++++++++++++++++++++++++++++++++++++++ UNKNOWN REMARKS TYPE +++++++++++++++++++++++++++++++++++++++++++ + AED NOTES: AEM SUSTAINMENT HAS RE-VERIFIED THE CSI AND NST DATA THROUGH ARISE CIM DATABASE + + ON 02/09/2016. COMPONENT IS STILL NON-CSI AND NON-NST. THERE ARE NO CHANGES TO THE DATA. +

+ MW. - WAGNER, MICHAEL / 256-842-1332 / 09-FEB-16 +

02/12/2016 AMCOM M&O TDPL PAGE 4

USAGE REMARKS

PRID : CB350-1

NSN : 4810-01-096-1056

DMWR : DMWR-1-1560-293

PRON : AX6M0171AX

++++++++++++++++++++++++++++++++++++++++++++++++++ BUDGET +++++++++++++++++++++++++++++++++++++++++++++++++++ + THE PROJECT IN LMP IS AX16NDB350AXAX. - KECK, RHONDA / 256-842-6628 / 10-FEB-16 + ++++++++++++++++++++++++++++++++++++++++++++++++ ENGINEERING ++++++++++++++++++++++++++++++++++++++++++++++++ + REVIEWED TDPL. VALIDATED AND LOADED PARTS WITH RESTRICTED SOURCES. - ROSE, ANNETTE D. / 2 +

+ 56-313-2632 / 05-JAN-16 +

02/12/2016 AMCOM M&O TDPL PAGE 5

OZONE DEPLETING CHEMICALS STATEMENT

PRID : CB350-1

NSN : 4810-01-096-1056

DMWR : DMWR-1-1560-293

PRON : AX6M0171AX

A technical review of the Technical Baseline provided has been performed in accordance with the National Defense Authorization Act for Fiscal Year 1993, and based on the information provided, no specifications or standards contain Ozone Depleting Chemicals.

02/12/2016 AMCOM M&O TDPL PAGE 6

DMWR COMPONENT LISTING

PRID : CB350-1

NSN : 4810-01-096-1056

DMWR : DMWR-1-1560-293

PRON : AX6M0171AX

DT CAGE ITEM NUMBER REV DATE ITEM STATUS LEGEND

NOMENCLATURE MEO ID REV CHG

PT 78286 13117-1 01/01/2015 NO SOURCE INFORMATION

SOLENOID CONTROL VALVE

PT 16780 22178 01/01/2015 NO SOURCE INFORMATION

SPRING

PT 16780 25754 01/01/2015 NO SOURCE INFORMATION

FILTER

PT 16780 25755 01/01/2015 NO SOURCE INFORMATION

SPACER

PT 16780 25756 01/01/2015 NO SOURCE INFORMATION

RETAINER

PT 16780 25757 01/01/2015 NO SOURCE INFORMATION

SEAT

PT 16780 25758 01/01/2015 NO SOURCE INFORMATION

SPACER

PT 16780 25759 01/01/2015 NO SOURCE INFORMATION

PUSHROD

PT 16780 26360 01/01/2015 NO SOURCE INFORMATION

BRACKET

PT 16780 32019-3 01/01/2015 NO SOURCE INFORMATION

NAMEPLATE

NS 78286 4810-01-096-1056 NO SOURCE INFORMATION

02/12/2016 AMCOM M&O TDPL PAGE 7

DMWR COMPONENT LISTING

PRID : CB350-1

NSN : 4810-01-096-1056

DMWR : DMWR-1-1560-293

PRON : AX6M0171AX

DT CAGE ITEM NUMBER REV DATE ITEM STATUS LEGEND

NOMENCLATURE MEO ID REV CHG

PT 16780 90014-014 01/01/2015 NO SOURCE INFORMATION

PACKING

PT 16780 91502-1 01/01/2015 NO SOURCE INFORMATION

BALL

CP 81343 M83461/1-011 NO SOURCE INFORMATION

CP 81343 M83461/1-215 NO SOURCE INFORMATION

DM 81996 DMWR-1-1560-293 08/31/2012 ADQ FOR UNLTD PROC D/D EXP

PILOT-ASSIST HYDRAULIC MODULE ASSEMBLY AED-C4598

MEO-B1222

MEO-B2008

MEO-T1356 D

DU 96906 MS28774-014 04/23/2009 ADQ FOR UNLTD PROC * D/A

RETAINER, PACKING BACKUP, SINGLE TURN PTFE

DU 80205 NAS1352-04H6P 01/01/1996 ADQ FOR UNLTD PROC * D/A

SCREW, CAP, SOCKET HEAD UNDRILLED AND DRILLED, PLAIN

DU 80205 NAS410 01/01/2003 ADQ FOR UNLTD PROC * D/A

NAS CERTIFICATION & QUALIFICATION OF NONDESTRUCTIVE TE

DU 80205 NASM33540 01/01/2003 ADQ FOR UNLTD PROC * D/A

SAFETY WIRING, SAFETY CABLING, COTTER PINNING

PT 16780 25749 01/01/2015 PROC RESTRICTED TO

SOLENOID ASSY 16780

02/12/2016 AMCOM M&O TDPL PAGE 8

DMWR COMPONENT LISTING

PRID : CB350-1

NSN : 4810-01-096-1056

DMWR : DMWR-1-1560-293

PRON : AX6M0171AX

DT CAGE ITEM NUMBER REV DATE ITEM STATUS LEGEND

NOMENCLATURE MEO ID REV CHG

PT 16780 26421 01/01/2015 PROC RESTRICTED TO

BODY ASSY 16780

PT 16780 26872 01/01/2015 PROC RESTRICTED TO

SEAT 16780

PT 16780 26873 01/01/2015 PROC RESTRICTED TO

SPACER 16780

PT 16780 90083-4 01/01/2015 PROC RESTRICTED TO

G-T RING SEAL 16780 5F573

PT 16780 90116-007-3 01/01/2015 PROC RESTRICTED TO

BACKUP PACKING 09257 16780

PT 16780 90116-011-3 01/01/2015 PROC RESTRICTED TO

BACKUP PACKING 09257 16780

PT 16780 90118-007 01/01/2015 PROC RESTRICTED TO

PACKING 16780

PT 16780 90118-215 01/01/2015 PROC RESTRICTED TO

PACKING 16780

PT 16780 90119-213 01/01/2015 PROC RESTRICTED TO

SEAL SET 16780

PT 16780 90119-214 01/01/2015 PROC RESTRICTED TO

SEAL SET 16780

PT 07060 CEC4981-213 01/01/2015 PROC RESTRICTED TO

SEAL SET 07060

02/12/2016 AMCOM M&O TDPL PAGE 9

DMWR COMPONENT LISTING

PRID : CB350-1

NSN : 4810-01-096-1056

DMWR : DMWR-1-1560-293

PRON : AX6M0171AX

DT CAGE ITEM NUMBER REV DATE ITEM STATUS LEGEND

NOMENCLATURE MEO ID REV CHG

PT 07060 CEC4981-214 01/01/2015 PROC RESTRICTED TO

SEAL SET 07060

02/12/2016 AMCOM M&O TDPL PAGE 10

DMWR SPECIFICATIONS AND STANDARDS LISTING

PRID : CB350-1

NSN : 4810-01-096-1056

DMWR : DMWR-1-1560-293

PRON : AX6M0171AX

QPL CAGE DOCUMENT NUMBER REV AMD CHG SPL SEC SEE

NOMENCLATURE LEGEND

81996 AMCOM-R-702-2 (REPLACED BY AMRDEC-POLICY-06-04 81996)

81996 AMCOM-R-702-7 NO N D/A

FLIGHT SAFETY PARTS/NEW SOURCE TESTING PROGRAM MANAGEM

81996 AMRDEC-POLICY-06-04 NO N D/A

AVIATION PRODUCT VERIFICATION AUDIT REQUIREMENTS

81349 MIL-C-5541 (REPLACED BY MIL-DTL-5541 81349)

81349 MIL-DTL-15024 F N * D/A

PLATES, TAGS, BANDS IDENTIFICATION EQUIPMENT,

81349 MIL-DTL-19834 C 1 N * D/A

PLATES, IDENTIFICATION OR INSTRUCTION, METAL FOIL, ADH

81349 MIL-DTL-5541 F N * D/A

CHEMICAL CONVERSION COATINGS ALUMINUM ALUMINUM ALLOYS

Q 81349 MIL-F-8815 D 1 N * D/A

FILTER AND FILTER ELEMENTS, FLUID PRESSURE, HYDRAULIC

81349 MIL-I-45607 C 5 N * D/A

EQUIPMENT, ACQUISITION, MAINTENANCE DISPOSITION

81349 MIL-I-45932 NO 2 N * D/A

INSERT, SCREW THREAD - THIN WALL, LOCK IN

81349 MIL-I-45932/1 C 3 N * D/A

INSERT, SCREW THREAD - THIN WALL, LOCK IN

81349 MIL-P-19834 (REPLACED BY MIL-DTL-19834 81349)

81349 MIL-PRF-22750 G 1 N * D/A

COATING, EPOXY, HIGH-SOLIDS

81349 MIL-PRF-85285 E N * D/A

COATING: POLYURETHANE, AIRCRAFT AND SUPPORT EQUIPMENT

96906 DODI-5000.64 NO N * D/A

ACCOUNTABILITY AND MANAGEMENT OF DOD-OWNDED EQUIPMENT

96906 MIL-STD-129 R N * D/A

MILITARY MARKING FOR SHIPMENT AND STORAGE

96906 MIL-STD-130 N N * D/A

IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY

96906 MIL-STD-2073-1 E N * D/A

STANDARD PRACTICE FOR MILITARY PACKAGING

96906 MIL-STD-865 D 1 N * D/A

SELECTIVE BRUSH PLATING, ELECTRO-DEPOSITION

02/12/2016 AMCOM M&O TDPL PAGE 11

DMWR SPECIFICATIONS AND STANDARDS LISTING

PRID : CB350-1

NSN : 4810-01-096-1056

DMWR : DMWR-1-1560-293

PRON : AX6M0171AX

QPL CAGE DOCUMENT NUMBER REV AMD CHG SPL SEC SEE

NOMENCLATURE LEGEND

96906 MS19060-1013 (REPLACED BY ASTM-F2215 81346)

ZZZZZ AR-750-43 NO N * D/A

ARMY TEST, MEASUREMENT, AND DIAGNOSTIC EQUIPMENT

ZZZZZ CTA-50-970 NO N * D/A

EXPENDABLE/DURABLE ITEMS (EXCEPT MEDICAL, CLASS V, REP

ZZZZZ DA-PAM-25-30 NO N * D/A

CONSOLIDATED INDEX ARMY PUBLICATIONS BLANK FORMS

ZZZZZ DA-PAM-738-751 NO N * D/A

FUNCTIONAL USERS MANUAL FOR THE ARMY MAINTENANCE MANAG

81343 AMS-M-3171 NO N ** D/A

MAGNESIUM ALLOY, PRETREATMENT PREVENTION CORROSION R(2

81343 AMS-P-83461/1 (REPLACED BY AS-83461/1 81343)

81343 AMS-QQ-P-416 NO N ** D/A

PLATING, CADMIUM (ELECTRODEPOSITED)

81343 AS-83461/1 NO N ** D/A

(R) M83461 O-RING MOLDED FROM AMS-P-83461 RUBBER

81343 AS-9132 NO N ** D/A

(R) DATA MATRIX QUALITY REQUIREMENTS FOR PARTS MARKING

81346 ASTM-E1417 NO N ** D/A

STANDARD PRACTICE FOR LIQUID PENETRANT TESTING

81346 ASTM-E1444 (REPLACED BY ASTM-E1444/E1444M 81346)

81346 ASTM-E1444/E1444M NO N ** D/A

STANDARD PRACTICE FOR MAGNETIC PARTICLE TESTING

81346 ASTM-F2215 NO N ** D/A

BALLS, BEARINGS, FERROUS NONFERROUS BEARINGS, VALVES,

I9008 ISO-10012 NO N ** D/A

MEASUREMENT MANAGEMENT SYSTEMS - REQUIREMENTS FOR MEAS

I9008 ISO-15434 NO N ** D/A

INFORMATION TECHNOLOGY AUTOMATIC IDENTIFICATION CAPTUR

I9008 ISO-9000 NO N ** D/A

QUALITY MANAGEMENT SYSTEMS - VOCABULARY THIRD EDITION

I9008 ISO-9001:2000 NO N ** D/A

QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS

I9008 ISO-IEC-15415 NO N ** D/A

INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION CAPT

02/12/2016 AMCOM M&O TDPL PAGE 12

DMWR SPECIFICATIONS AND STANDARDS LISTING

NSN : 4810-01-096-1056

DMWR : DMWR-1-1560-293

PRON : AX6M0171AX

QPL CAGE DOCUMENT NUMBER REV AMD CHG SPL SEC SEE

NOMENCLATURE LEGEND

I9008 ISO-IEC-17025 NO N ** D/A

GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND

I9008 ISO/IEC-16022 NO N ** D/A

INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION CAPT

7P725 NCSL-Z540.1 (REPLACED BY ISO-IEC-17025 I9008)

(REPLACED BY NCSL-Z540.3 7P725)

7P725 NCSL-Z540.3 NO N ** D/A

CALIBRATION MEASURING EQUIPMENT

ZZZZZ TM-1-1500-204-23

ZZZZZ TM-1-1520-237-23&P

ZZZZZ TM-1-8145-695-24&P

02/12/2016 AMCOM M&O TDPL PAGE 13

TDPL ITEM SUMMARY

PRID : CB350-1

NSN : 4810-01-096-1056

DMWR : DMWR-1-1560-293

PRON : AX6M0171AX

TOTAL DMWR COMPONENT LISTING = 33

TOTAL DMWR SPECIFICATIONS AND STANDARDS = 45

TOTAL DMWR TEST EQUIPMENT = 0

GRAND TOTAL OF ALL DOCUMENTS IN TDPL = 78

02/12/2016 AMCOM M&O TDPL PAGE 14

TDPL LEGEND

PRID : CB350-1

NSN : 4810-01-096-1056

DMWR : DMWR-1-1560-293

PRON : AX6M0171AX

DESCRIPTION OF SYMBOLS

* = NOT FURNISHED - TO BE OBTAINED FROM:

DEFENSE PRINTING SERVICE DETACHMENT OFFICE (DPSDO)

STANDARDIZATION DOCUMENT ORDER DESK

700 ROBBINS AVENUE

BUILDING 4D

PHILADELPHIA, PA 19111-5094

IF NOT AVAILABLE, IMMEDIATELY ADVISE THE PROCURING CONTRACTING OFFICER.

** = NOT FURNISHED. COMMERCIAL SPECIFICATIONS AND STANDARDS MAY BE OBTAINED

FROM THE PUBLISHERS. THEY ARE NOT AVAILABLE FROM GOVERNMENT SOURCES.

D/A = DISTRIBUTION STATEMENT A - APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED.

D/D = DISTRIBUTION STATEMENT D - DISTRIBUTION AUTHORIZED TO THE DEPARTMENT OF DEFENSE AND

DOD CONTRACTORS ONLY.

EXP = EXPORT CONTROLLED DOCUMENT

EXPORT CONTROL STATEMENT

WARNING - THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS

EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751 ET SEQ.)OR EXECUTIVE ORDER 12470.

VIOLATION OF THESE EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

Q = QUALIFIED PRODUCTS LIST - A LETTER 'Q' UNDER THE QPL COLUMN OF THE SPECIFICATIONS AND STANDARDS SECTION INDICATES THAT A QUALIFIED PRODUCTS LIST (QPL) IS REQUIRED. THE NUMBER OF THE QPL IS

THE SAME AS THE SPECIFICATION NUMBER.

02/12/2016 AMCOM M&O TDPL PAGE 19

WHERE USED REPORT

PRID : CB350-1

NSN : 4810-01-096-1056

DMWR : DMWR-1-1560-293

PRON : AX6M0171AX

DT SUPPORTING ITEM SUP CAGE LGD CONTROL ITEM CTRL CAGE

PT 13117-1 78286 4810-01-096-1056

PT 22178 16780 13117-1 78286

PT 25749 16780 13117-1 78286

PT 25754 16780 13117-1 78286

PT 25755 16780 13117-1 78286

PT 25756 16780 13117-1 78286

PT 25757 16780 13117-1 78286

PT 25758 16780 13117-1 78286

PT 25759 16780 13117-1 78286

PT 26360 16780 13117-1 78286

PT 26421 16780 13117-1 78286

PT 26872 16780 13117-1 78286

PT 26873 16780 13117-1 78286

PT 32019-3 16780 13117-1 78286

NS 4810-01-096-1056 TOP ITEM

PT 90014-014 16780 13117-1 78286

PT 90083-4 16780 13117-1 78286

PT 90116-007-3 16780 13117-1 78286

PT 90116-011-3 16780 13117-1 78286

PT 90118-007 16780 13117-1 78286

PT 90118-215 16780 13117-1 78286

PT 90119-213 16780 13117-1 78286

PT 90119-214 16780 13117-1 78286

PT 91502-1 16780 13117-1 78286

NC AMCOM-R-702-2 81996 DMWR-1-1560-293 81996

NC AMCOM-R-702-7 81996 DMWR-1-1560-293 81996

RS AMRDEC-POLICY-06-04 81996 R AMCOM-R-702-2 81996

NC AMS-M-3171 81343 DMWR-1-1560-293 81996

NC AMS-P-83461/1 81343 13117-1 78286

NC AMS-QQ-P-416 81343 DMWR-1-1560-293 81996

NC AR-750-43 ZZZZZ DMWR-1-1560-293 81996

NC AS-83461 81343 B AS-83461/1 81343

RS AS-83461/1 81343 R AMS-P-83461/1 81343

NC AS-9132 81343 DMWR-1-1560-293 81996

NC ASTM-E1417 81346 DMWR-1-1560-293 81996

NC ASTM-E1444 81346 B ASTM-E1444/E1444M 81346

02/12/2016 AMCOM M&O TDPL PAGE 20

WHERE USED REPORT

PRID : CB350-1

NSN : 4810-01-096-1056

DMWR : DMWR-1-1560-293

PRON : AX6M0171AX

DT SUPPORTING ITEM SUP CAGE LGD CONTROL ITEM CTRL CAGE

NC ASTM-E1444 81346 DMWR-1-1560-293 81996

RS ASTM-E1444/E1444M 81346 R ASTM-E1444 81346

RS ASTM-F2215 81346 R MS19060-1013 96906

PT CEC4981-213 07060 13117-1 78286

PT CEC4981-214 07060 13117-1 78286

NC CTA-50-970 ZZZZZ DMWR-1-1560-293 81996

NC DA-PAM-25-30 ZZZZZ DMWR-1-1560-293 81996

NC DA-PAM-738-751 ZZZZZ DMWR-1-1560-293 81996

DM DMWR-1-1560-293 81996 13117-1 78286

DM DMWR-1-1560-293 13117-1 78286

NC DODI-5000.64 96906 DMWR-1-1560-293 81996

NC ISO I9008 B ISO/IEC-16022 I9008

NC ISO-10012 I9008 DMWR-1-1560-293 81996

NC ISO-15434 I9008 DMWR-1-1560-293 81996

NC ISO-9000 I9008 DMWR-1-1560-293 81996

NC ISO-9001:2000 I9008 DMWR-1-1560-293 81996

NC ISO-IEC-15415 I9008 DMWR-1-1560-293 81996

RS ISO-IEC-17025 I9008 R NCSL-Z540.1 7P725

NC ISO/IEC-16022 I9008 DMWR-1-1560-293 81996

CP M83461 81343 B M83461/1-011 81343

CP M83461 81343 B M83461/1-215 81343

CP M83461/1-011 81343 13117-1 78286

CP M83461/1-215 81343 13117-1 78286

NC MIL-C-5541 81349 DMWR-1-1560-293 81996

NC MIL-DTL-15024 81349 DMWR-1-1560-293 81996

RS MIL-DTL-19834 81349 R MIL-P-19834 81349

RS MIL-DTL-5541 81349 R MIL-C-5541 81349

NC MIL-F-8815 81349 DMWR-1-1560-293 81996

NC MIL-I-45607 81349 DMWR-1-1560-293 81996

NC MIL-I-45932 81349 B MIL-I-45932/1 81349

NC MIL-I-45932/1 81349 DMWR-1-1560-293 81996

NC MIL-P-19834 81349 DMWR-1-1560-293 81996

NC MIL-PRF-22750 81349 DMWR-1-1560-293 81996

NC MIL-PRF-85285 81349 DMWR-1-1560-293 81996

NC MIL-STD-129 96906 DMWR-1-1560-293 81996

NC MIL-STD-130 96906 DMWR-1-1560-293 81996

02/12/2016 AMCOM M&O TDPL PAGE 21

WHERE USED REPORT

PRID : CB350-1

NSN : 4810-01-096-1056

DMWR : DMWR-1-1560-293

PRON : AX6M0171AX

DT SUPPORTING ITEM SUP CAGE LGD CONTROL ITEM CTRL CAGE

NC MIL-STD-2073-1 96906 DMWR-1-1560-293 81996

NC MIL-STD-865 96906 DMWR-1-1560-293 81996

DU MS19060-1013 96906 13117-1 78286

DU MS28774-014 96906 13117-1 78286

DU NAS1352-04H6P 80205 13117-1 78286

DU NAS410 80205 DMWR-1-1560-293 81996

DU NASM33540 80205 DMWR-1-1560-293 81996

NC NCSL-Z540.1 7P725 DMWR-1-1560-293 81996

RS NCSL-Z540.3 7P725 R NCSL-Z540.1 7P725

TD TM-1-1500-204-23 ZZZZZ DMWR-1-1560-293 81996

TD TM-1-1520-237-23&P ZZZZZ DMWR-1-1560-293 81996

TD TM-1-8145-695-24&P ZZZZZ DMWR-1-1560-293 81996

WHERE USED LEGEND

B = BASIC FOR

R = REPLACEMENT FOR

RS IN 'DT' COLUMN INDICATES A REPLACEMENT SPEC

02/12/2016 AMCOM M&O TDPL PAGE 22

QUALITY ASSURANCE

PRID : CB350-1

NSN : 4810-01-096-1056

DMWR : DMWR-1-1560-293

PRON : AX6M0171AX

| AVIATION SYSTEMS BRANCH |

| CONTRACT QUALITY CLAUSE/DATA SELECTION WORKSHEET |

| RDMR-SEQ |

| PRID: CB350-1 | NSN: 4810-01-096-1056 | P/N: 13117-1 | STATUS: ROUTINE |

| NOMENCLATURE: HYDRAULIC VALVE | WSC: A-BE |

| THE FOLLOWING QUALITY REQUIREMENTS ARE TO BE INCLUDED IN THE CONTRACT: |

| X | INSPECTION OF SUPPLIES (FAR 52.246-2) |

| X | TERMINOLOGY / CALIBRATION: ISO 8402 (TERMINOLOGY); AND ANSI/NCS; Z540-1-1994 OR 10012-1-1992 |

| | (CALIBRATION) (USAAMCOM 52.246-4003) |

| X | HIGHER LEVEL CONTRACT QUALITY REQUIREMENT (FAR 50.246-11); ISO 9001:2000 OR EQUIVALENT |

| | IF GOVT FURNISHED MATERIAL (GFM) WILL BE SUPPLIED, INCLUDING DID DI-QCIC-80736 AS A CDRL |

| | CERTIFICATE OF CONFORMANCE (FAR 52.246-15) |

| 3 | FIRST ARTICLE TESTING QUANTITY |

| ORIGIN | LOCATION OF INSPECTION |

| ORIGIN | LOCATION OF ACCEPTANCE |

| YES | PRODUCT VERIFICATION AUDIT REQUIRED IAW AMRDEC POLICY 06-04 (USAAMCOM 52.209-4723) |

| | ES7030 STANDARD |

| THE FOLLOWING ARE REQUIRED FOR CRITICAL SAFETY ITEMS: |

| | QE-STD-2 (M&O CSI QUALITY SYSTEMS REQUIREMENTS) USAAMCOM 52.209-4012 OR AMCOM APPROVED EQUIVALENT |

02/12/2016 AMCOM M&O TDPL PAGE 23

QUALITY ASSURANCE

PRID : CB350-1

NSN : 4810-01-096-1056

DMWR : DMWR-1-1560-293

PRON : AX6M0171AX

| REMARKS: |

| NON-CSI, DMWR |

| SIGNATURE & DATE : PEARSON, GREG 12/22/2015 | PHONE : (256)313-2032 |

| TEAM LEADER & DATE : PEARSON, GREG 12/22/2015 | PHONE : (256)313-2032 |

02/12/2016 AMCOM M&O TDPL PAGE 24

REQUIREMENT JUSTIFICATION AND CERTIFICATION

PRID : CB350-1

NSN : 4810-01-096-1056

DMWR : DMWR-1-1560-293

PRON : AX6M0171AX

AMSAM-MAV-UA Date: 11/24/2015 Status: ROUTINE Memorandum for AMSAM-MMC-AV SUBJECT: Requirement Justification and Certification for Maintenance and Overhaul Data Package

1. Request M&O Data Call package be prepared for ITEM: HYDRAULIC VALVE, NSN: 4810-01-096-1056, P/N: 13117-1, SYSTEM: UH-60

Product or Service Code: 332919

2. The following information is provided:

a. DMWR: DMWR-1-1560-293, Revision Date: 08/31/2012 has been identified for this requirement.

Original Equipment Manufacturer (if no DMWR):

b. Minimum/Maximum quantities for a 5 year requirement are 50 Min and 1230 Max.

c. Materiel Requirements Planning (MRP)

(1) MRP, dated 09/16/2015 which supports a total US quantity of: 1025

50 for FY 16 250 for FY 19 250 for FY 17 250 for FY 20 225 for FY 18

(2) Foreign Military Sales (FMS) Quantities:

0 for FY 16 50 for FY 19 50 for FY 17 55 for FY 20 50 for FY 18

(3) Quantity and schedule requirements identified on the PWD and the MRP above were generated as a result of the LMP MRP recommendation or other Supply circumstances which require PWD activity IAW provisions of AR 710-1, Centralized Inventory Management of the Army Supply System.

02/12/2016 AMCOM M&O TDPL PAGE 25

REQUIREMENT JUSTIFICATION AND CERTIFICATION

NSN : 4810-01-096-1056

DMWR : DMWR-1-1560-293

PRON : AX6M0171AX

d. I certify there are currently 186 unserviceable reparable assets available.

Asset generation is 2 per month.

e. Proposed input and output NSN and P/N is/are:

Input NSN P/N 4810-01-096-1056 13117-1 Output NSN P/N 4810-01-096-1056 13117-1

f. Output NSN is not listed as a Critical Safety Item.

g. Contract is required for Overhaul/Recapitalization.

h. Required production schedule is at the rate of 30 per month.

i. Return serviceable assets to Plant: 7000, DODAAC: W25G1W, RIC: BY6.

j. Repair Bill of Materials (RBOM) to support this requirement is not attached (not required if sole source).

k. Overhaul Consumption Data (OCD) is not required.

l. Current Replacement Cost is $ 1,167 and 65 percent of Replacement Cost that overhaul/recapitalization cost cannot exceed is $ 786 without AMCOM approval.

(NOTE. If the latest new procurement is greater than 5 years old, an informal market survey is required to upgrade the Replacement Cost and Maintenance Expenditure Limit.)

m. Estimated scrap rate is 11 percent.

n. See attached Packaging Data Requirements Sheet.

o. GFP/GFE will not be provided (if provided, complete GFP/GFE sheet).

p. Previous Contractor and Cage and any Special instructions/information.

Remarks

02/12/2016 AMCOM M&O TDPL PAGE 26

REQUIREMENT JUSTIFICATION AND CERTIFICATION

PRID : CB350-1

NSN : 4810-01-096-1056

DMWR : DMWR-1-1560-293

PRON : AX6M0171AX

W58RGZ10D0241, MERRILL CORPORATION, CGAE CODE:0JXZ1

q. Market Survey Activity:

This item has been published in the Competition Advocate's Shopping List (CASL), (or)

3. Point of Contact is GDULA, ROBERT H. Org: Phone: (256)955-6909

4. I certify that the supporting data under my cognizance which are included in the justification are accurate and complete to the best of my knowledge and belief.

Approval Rep Phone Date

CHILDS, BERNIDA (256)313-1314 01/26/2016

Remarks:

A QUANTITY OF 3 WILL BE SHIPPED FOR THE PVA IF A PVA IS REQUIRED. THIS NUMBER IS BASED ON

THE MOST ECONOMICAL TRANSPORTATION COST.

*CASL-JUNE 2015

**IUID GUIDELINES ARE ADDRESSED IN THE MEO B2008 AS IDENTIFIED BY THE AED PERSONNEL. ALSO

STATED IN THE M&O AED REQUIREMENTS DATA PART IV IN ICAPP.

02/12/2016 AMCOM M&O TDPL PAGE 27

FUNCTIONAL REQUIREMENT AUTHENTICATION BOARD (FRAB)

PRID : CB350-1

NSN : 4810-01-096-1056

DMWR : DMWR-1-1560-293

PRON : AX6M0171AX

Status: ROUTINE

MANAGEMENT, FUNCTIONAL DISCIPLINE, AND DATA REQUIREMENTS, AND FUNCTIONAL SUPPORT TEMPLATE CERTIFICATION STATEMENT In accordance with AMCR 70-16, the management, functional discipline, and data requirements contained in the Request for Proposal for NSN: 4810-01-096-1056 PRID: CB350-1 Part Number: 13117-1 are essential, cost effective, and value added. Functional support templates were used in developing proposal requirements.

An Organizational FRAB was conducted ( ) YES (XX) NO

CHILDS, BERNIDA

AMSAM-MAV-UA

MILLER, RUSSELL F.

for

RUSSELL F. MILLER

AMCOM and PEO Aviation Standards Executive (for M&O)

02/12/2016 AMCOM M&O TDPL PAGE 28

STATEMENT OF WORK

PRID : CB350-1

NSN : 4810-01-096-1056

DMWR : DMWR-1-1560-293

PRON : AX6M0171AX

Status: ROUTINE

a. The Contractor, as an independent Contractor, and not as an agent or employee of the Government, shall furnish all services, facilities, labor, parts, materials, equipment, tools and data (other than Government Furnished Property), necessary to accomplish the inspection and overhaul/recapitalization for HYDRAULIC VALVE that is required to return the items as specified in Section B, to condition code A as defined by Army Regulation 725-50. The input/output configuration shall be as defined in Section B herein. Upon completion of the overhaul/recapitalization, as applicable, the items shall be packaged as defined in each individual delivery order of the contract and shipped to the destination(s) specified in each individual delivery order.

b. Prior to commencement of overhaul/recapitalization, the Contractor shall disassemble and inspect the item to the extent necessary to determine if the item is physically unrepairable or has suffered abnormal or catastrophic damage. If the latter conditions exist, the Contractor shall notify the Procuring Contracting Officer (PCO) through the cognizant Administration Contracting Officer (ACO) and shall stop work on the item(s) until given further instructions or disposition of the item(s) by the PCO.

c. In the event the PCO determines that certain items should be scrapped, the contractor shall scrap such items at the fixed unit price in Section B hereof and make disposition in accordance with (IAW) the Contractor's approved Government property procedures. Such scrapped items shall count toward the quantities ordered hereunder.

d. Overhaul/Recapitalization shall be accomplished IAW Depot Maintenance Work Requirement (DMWR)

DMWR-1-1560-293,

In conjunction with the DWMR, the following MEOs will be used. (B1222, B2008, C4598 and T1356D).

e. Critical Safety Item: N/A

f. Upon receipt of the reparables, containers shall be reviewed for serviceability. Containers shall be considered serviceable unless one or more of the following conditions exist: (1) containers are structurally damaged to include damage to the suspension system, cracks or holes to the container hull, hull deformity to the extent the container cannot be closed (or sealed where required), or dents that will interfere with the item envelope;

(2) corrosion has progressed to the point where fit, function or the life of the container is affected. Items received without containers or containers determined to be unserviceable shall be processed IAW the Contractor's locally approved Government Property procedures. Components received improperly packaged, damaged with corrosion/deterioration or those with shipping discrepancies shall be reported IAW DI-MGMT-80503.

02/12/2016 AMCOM M&O TDPL PAGE 29

STATEMENT OF WORK

PRID : CB350-1

NSN : 4810-01-096-1056

DMWR : DMWR-1-1560-293

PRON : AX6M0171AX

g. Any Contractor paint facility which is used in the performance of this contract shall comply with the Environmental Protection Agency and Occupational Safety and Health Administration standards for painting as implemented by TM 55-1500-345-23, w/ ch12Painting and Markings of Army Aircraft.

h. Data and reports shall be submitted IAW the Contract Data Requirements List, DD Form 1423, Exhibit A. Data shall be packed and marked as necessary to assure safe delivery to the addresses indicated on the DD Form(s) 1423.

i. Product Verification Audit (PVA): The contractor shall conduct PVA in accordance with AMCOM FAR CLAUSE 52.209-4723 as specified in the solicitation/contract attachments.

j. The Army Maintenance Management System - Aviation (TAMMS-A): The Contractor shall complete the forms and records as specified in DA PAM 738-751.

k. Serial Number Report Requirement (SNRR): N/A

l. The items the Contractor shall overhaul/recapitalize are identified below:

m. The overhaul/recapitalization planned quantity for 5 years is minimum 50, maximum 1230. Input will be 30 days after receipt of order (ARO). Output shall be as specified in the solicitation/contract schedule. Serviceable assets shall be returned to W25G1W.

(1) 1st year qty 50 (2) 2nd year qty 300

(3) 3rd year qty 275 (4) 4th year qty 300

(5) 5th year qty 305

n. Inventory Transactions - The contractor shall provide a Contract Depot Maintenance Production Report IAW

DI-PSSS-81995.

02/12/2016 AMCOM M&O TDPL PAGE 30

STATEMENT OF WORK

PRID : CB350-1

NSN : 4810-01-096-1056

DMWR : DMWR-1-1560-293

PRON : AX6M0171AX

o. Foreign Military Sales (FMS): These total requirements meet or exceed the requirements for the Security Assistance Management Directorate (SAMD) per the Acquisition Center Directorate IAW SAMD and Integrated Material Management Center (IMMC) Method of Understanding (MOU) document dated 4 December 2004. The IMMC is responsible for conducting Weapon System Team (WST) reviews of SAMD's FMS Aviation hardware, allowing 20% over the Army's maximum quantity during the life of the contract specifically for FMS requirements. SAMD and IMMC will negotiate provisions for FMS critical items that exceed the standard 20% on case-by-case basis.

p. The replacement cost is $1,167 for the subject item. When price of overhaul exceeds $786, a review of disposition will be made by AMCOM.

q. The Government reserves the right to replace any items scrapped.

r. Overhaul Repair Report: N/A

s. Quality Deficiency Report: The Contactor shall prepare the Quality Deficiency Report IAW DI-QCIC-80736.

t. Supplies Interface and Oversight: N/A

u. Shipping Containers NSN: , P/N: shall be utilized. If containers are not reparable or if assets are not delivered in the approved containers, the containers shall be Contractor Furnished Material. Shipment: The method of shipment must use a procedure so that the package can be tracked in case the shipment is not received by AMCOM.

Remarks: Last contract was awarded to Merrill Corporation, (Cage code; 0JXZ1)

W58RGZ10D0241.

02/12/2016 AMCOM M&O TDPL PAGE 31

DEFINITION OF DOCUMENT CATEGORIES

PRID : CB350-1

NSN : 4810-01-096-1056

DMWR : DMWR-1-1560-293

PRON : AX6M0171AX

CONTRACTORS ARE ENCOURAGED TO OFFER SUGGESTIONS, COMMENTS, OR ALTERNATIVES TO THE DOCUMENTS CITED HEREIN.

TAILORING, CATEGORY OF APPLICATION, REVISION LEVELS, AND THE DOCUMENTS CITED ARE ALL CANDIDATES.

DEFINITION OF DOCUMENT CATEGORIES :

1. Category 0 (Cat. 0). The requirements contained in the directly cited document are non-mandatory and are for reference or information only.

2. Category 1 (Cat. 1). The requirements contained in the directly cited document are contractually applicable to the extent specified. All requirements contained in reference and subsequently referenced documents are contractually for information only unless otherwise specified in the solicitation, contract, or contract modification.

3. Category 2 (Cat. 2). The requirements contained in the directly cited document are contractually applicable to the extent specified. All requirements contained in referenced documents are also imposed to the extent specified. All requirements contained in subsequently referenced documents are contractually for information only unless otherwise specified in the solicitation, contract or contract modification.

DEFINITION OF DD FORM 1423 :

Blocks 10, 11, 12, 13 : 'Submit' means to deliver to the Government as specified in the shipping instructions for data which are located in section F of the contract.

Block 14 : Regular/Repro Copies Regular Copy - Blueline, Blackline, Xerographic, (originals of reports, plans, or routine data also fall into this definition).

Repro Copy - Multilith, Vellum, photographic negatives, etc. (originals of drawings, engineering change proposals (ECPs), engineering release records (ERRs), or technical publications). Note : Type of electronic media, e.g., diskette, CD-ROM, may be designated in Block 16.

CONTRACTUAL REQUIREMENTS OF DATA ITEM DESCRIPTION (DID) :

DD Form 1664, Block 10 : Preparation Instructions. This block contains the only portion of the DID that represents a contractual requirement imposed on the contractor. All other blocks are for Government use and for reference and information only ALL REFERENCES TO SOURCE DOCUMENTS IN BLOCK 10 OF THIS DID ARE USED FOR REFERENCE AND INFORMATION ONLY.

02/12/2016 AMCOM M&O TDPL PAGE 32

DOCUMENT SUMMARY LIST

PRID : CB350-1

NSN : 4810-01-096-1056

DMWR : DMWR-1-1560-293

PRON : AX6M0171AX

NOUN : HYDRAULIC VALVE STATUS: ROUTINE

DOCUMENT ID TITLE DATE

CATEGORY

DI-MGMT-80503 REPORT OF SHIPPING (ITEM) AND PACKAGING DISCREPANCY 12/30/1987

DI-QCIC-80736 QUALITY DEFICIENCY REPORT 01/17/1989

AR-725-50 REQUISITIONING, RECEIPT, AND ISSUE SYSTEM 11/15/1995

DA-PAM-738-751 FUNCTIONAL USERS MANUAL FOR THE ARMY MAINTENANCE MANAGEMENT SYSTEM-AVIATION 02/28/2014

(TAMMS-A) 1

DI-PSSS-81995 CONTRACT DEPOT MAINTENANCE (CDM) PRODUCTION REPORT 09/04/2015

DMWR-1-1560-293 DEPOT MAINTENANCE WORK REQUIREMENT 08/31/2012

TM-55-1500-345-23W/C PAINTING AND MARKING OF ARMY AIRCRAFT 01/10/2011

CH12 1

02/12/2016 AMCOM M&O TDPL PAGE 33

CDRL MAILING ADDRESSES

PRID : CB350-1

NSN : 4810-01-096-1056

DMWR : DMWR-1-1560-293

PRON : AX6M0171AX

MAILING ADDRESSES

FOR THE OFFICE SYMBOLS USED IN BLOCK 14 OF THE DD FORM 1423, CONTRACT DATA REQUIREMENTS LIST (CDRL).

AMCOM

COMMANDER

US ARMY AVIATION AND MISSILE COMMAND

AMCOM ATTN:

AMSAM-MMM-TP

AMSAM-MSC-CLP

SEE BLK 16

REDSTONE ARSENAL, AL 35898

02/12/2016 AMCOM M&O TDPL PAGE 34

CONTRACT DATA REQUIREMENTS LIST (CDRL)

REPORT OF SHIPPING AND PACKAGING DISCREPANCY

PRID : CB350-1

NSN : 4810-01-096-1056

DMWR : DMWR-1-1560-293

PRON : AX6M0171AX

| CONTRACT DATA REQUIREMENTS LIST (1 Data Item) | | PRID: CB350-1 | Part Number: 13117-1 | Status: ROUTINE |

| A. CONTRACT LINE ITEM NO. | B. EXHIBIT | C. CATEGORY: |

| D. SYSTEM/ITEM | E. CONTRACT/PR NO. | F. CONTRACTOR |

| HYDRAULIC VALVE | | |

| NSN: 4810-01-096-1056 | | |

| 1. DATA ITEM NO. | 2. TITLE OF DATA ITEM | 3. SUBTITLE |

| A001 | Report of Shipping (Item) and Packaging Discrepancy | | | 4. Authority (Data Acquisition Doc No.) | 5. CONTRACT REFERENCE | 6. REQUIRING OFFICE |

| DI-MGMT-80503 | SOW, PARA F | AMSAM-MMM-TP |

| 7. DD 250 REQ | 9. DIST STATEMENT | 10. FREQUENCY | 12. DATE OF FIRST | 14. DISTRIBUTION |

| | REQUIRED | | SUBMISSION +----------------+----------------+

| LT | | SEE BLK 16 | SEE BLK 16 | | b. COPIES |

| 8. APP CODE | A | 11. AS OF DATE | 13. DATE OF SUBSEQUENT | a. ADDRESSES | DRAFT| FINAL |

| | | | SUBMISSION | | +---+-----+

| N/A | | N/A | SEE BLK 16 | | |REG|REPRO|

| 16. REMARKS: |AMSAM-MMM-TP | 0 | 1 | 0 |

| BLOCK 10, 12, & 13: | | | | |

| a. FOR WRONG components received submit a Shipping Supply | | | | | | Discrepancy Report (SDR). | | | | | | b. For components received improperly packaged in containers, packaged in | | | | | | unserviceable containers, or packaged without containers (when a container | | | | | | is required), submit a packaging SDR. | | | | |

02/12/2016 AMCOM M&O TDPL PAGE 35

CONTRACT DATA REQUIREMENTS LIST (CDRL)

REPORT OF SHIPPING AND PACKAGING DISCREPANCY

PRID : CB350-1

NSN : 4810-01-096-1056

DMWR : DMWR-1-1560-293

PRON : AX6M0171AX

| 16. REMARKS CONTINUED: | | | | |

| c. When there is a packaging discrepancy and the wrong component is received | | | | | | submit a dual shipping and packaging SDR. | | | | | | d. For packaging discrepancies discovered upon induction of the item to | | | | | | repair/overhaul (hidden discrepancies), submit the SDR form within ten | | | | | | (10) days of discovery of the discrepancy. | | | | | | e. If the packaging discrepancy appears to have caused deterioration of the | | | | |

| item, include an estimated cost to repackage the asset in Block 12 of the | | | | | | SF form 364. | | | | | | f. Report by letter the number of excess reusable containers made available | | | | | | through scrap out of items, to addresses in block 14(A). | | | | |

| POC: | | | | |

| PHONE: | | | | |

| | 15. TOTAL | 0 | 1 | 0 |

| G. PREPARED BY | H. DATE | I. APPROVED BY | J. DATE |

| GDULA, ROBERT H. | 01/25/2016 | CHILDS, BERNIDA | 01/26/2016 |

| 17. PRICE GROUP | 18. ESTIMATED TOTAL PRICE |

AMSRD-AMR-SE-TD-ST/DM CONCUR: MAYHALL, CONNIE

LOG # 736

DATE: 02/08/2016

02/12/2016 AMCOM M&O TDPL PAGE 36

CONTRACT DATA REQUIREMENTS LIST (CDRL)

CONTRACT DEPOT MAINTENANCE (CDM) PRODUCTION REPORT

PRID : CB350-1

NSN : 4810-01-096-1056

DMWR : DMWR-1-1560-293

PRON : AX6M0171AX

| CONTRACT DATA REQUIREMENTS LIST (1 Data Item) | | PRID: CB350-1 | Part Number: 13117-1 | Status: ROUTINE |

| A. CONTRACT LINE ITEM NO. | B. EXHIBIT | C. CATEGORY: |

| D. SYSTEM/ITEM | E. CONTRACT/PR NO. | F. CONTRACTOR |

| HYDRAULIC VALVE | | |

| NSN: 4810-01-096-1056 | | |

| 1. DATA ITEM NO. | 2. TITLE OF DATA ITEM | 3. SUBTITLE |

| A003 | Contract Depot Maintenance (CDM) Production Report | | | 4. Authority (Data Acquisition Doc No.) | 5. CONTRACT REFERENCE | 6. REQUIRING OFFICE |

| DI-PSSS-81995 | SOW, PARA N | AMSAM-MSC-SSS |

| 7. DD 250 REQ | 9. DIST STATEMENT | 10. FREQUENCY | 12. DATE OF FIRST | 14. DISTRIBUTION |

| | REQUIRED | | SUBMISSION +----------------+----------------+

| LT | | MTHLY | SEE BLK 16 | | b. COPIES | | 8. APP CODE | A | 11. AS OF DATE | 13. DATE OF SUBSEQUENT | a. ADDRESSES | DRAFT| FINAL |

| | | | SUBMISSION | | +---+-----+

| N/A | | 0 | NLT 10 DAEOM | | |REG|REPRO|

| 16. REMARKS: |SEE BLK 16 | 0 | 2 | 0 |

| Block 12: The first report is due 3 working days after receipt of reparable | | | | | | item(s). | | | | | | Block 14: The contractor shall provide data in digital format to: | | | | | | usarmy.redstone.usamc.mbx.immc-smb-ammo@mail.mil | | | | | | An additional copy shall be sent to: usarmy.uh60m-oteam@mail.mil | | | | | | Disregard the statement using the contractor's format. Both copies shall be p | | | | | | repared and submitted as an MS Excel file in accordance with the attached sam | | | | | | ple. | | | | |

| | 15. TOTAL | 0 | 2 | 0 |

| G. PREPARED BY | H. DATE | I. APPROVED BY | J. DATE |

| GDULA, ROBERT H. | 01/25/2016 | CHILDS, BERNIDA | 01/26/2016 |

| 17. PRICE GROUP | 18. ESTIMATED TOTAL PRICE |

AMSRD-AMR-SE-TD-ST/DM CONCUR: MAYHALL, CONNIE

LOG # 736

DATE: 02/08/2016

02/12/2016 AMCOM M&O TDPL PAGE 37

CONTRACT DATA REQUIREMENTS LIST (CDRL)

QUALITY DEFICIENCY REPORT

PRID : CB350-1

NSN : 4810-01-096-1056

DMWR : DMWR-1-1560-293

PRON : AX6M0171AX

| CONTRACT DATA REQUIREMENTS LIST (1 Data Item) | | PRID: CB350-1 | Part Number: 13117-1 | Status: ROUTINE |

| A. CONTRACT LINE ITEM NO. | B. EXHIBIT | C. CATEGORY: |

| D. SYSTEM/ITEM | E. CONTRACT/PR NO. | F. CONTRACTOR |

| HYDRAULIC VALVE | | |

| NSN: 4810-01-096-1056 | | |

| 1. DATA ITEM NO. | 2. TITLE OF DATA ITEM | 3. SUBTITLE |

| A002 | Quality Deficiency Report | | | 4. Authority (Data Acquisition Doc No.) | 5. CONTRACT REFERENCE | 6. REQUIRING OFFICE |

| DI-QCIC-80736 | SOW, PARA S | RDMR-SEQ |

| 7. DD 250 REQ | 9. DIST STATEMENT | 10. FREQUENCY | 12. DATE OF FIRST | 14. DISTRIBUTION |

| | REQUIRED | | SUBMISSION +----------------+----------------+

| LT | | SEE BLK 16 | SEE BLK 16 | | b. COPIES | | 8. APP CODE | A | 11. AS OF DATE | 13. DATE OF SUBSEQUENT | a. ADDRESSES | DRAFT| FINAL |

| | | | SUBMISSION | | +---+-----+

| N/A | | N/A | SEE BLK 16 | | |REG|REPRO|

| 16. REMARKS: |AMSAM-MSC-CLP | 0 | 1 | 0 |

| Blocks 10, 12, AND 13: No report is necessary unless there is a discrepancy. | | | | | | Contractor shall submit NLT 10 days after discovery of deficiency. The | | | | | | Contractor shall coordinate quality deficiency with the Cognizant | | | | | | Government Representative. | | | | |

02/12/2016 AMCOM M&O TDPL PAGE 38

CONTRACT DATA REQUIREMENTS LIST (CDRL)

QUALITY DEFICIENCY REPORT

PRID : CB350-1

NSN : 4810-01-096-1056

DMWR : DMWR-1-1560-293

PRON : AX6M0171AX

| | 15. TOTAL | 0 | 1 | 0 |

| G. PREPARED BY | H. DATE | I. APPROVED BY | J. DATE |

| GDULA, ROBERT H. | 01/25/2016 | CHILDS, BERNIDA | 01/26/2016 |

| 17. PRICE GROUP | 18. ESTIMATED TOTAL PRICE |

AMSRD-AMR-SE-TD-ST/DM CONCUR: MAYHALL, CONNIE

LOG # 736

DATE: 02/08/2016

02/12/2016 AMCOM M&O TDPL PAGE 39

CONTRACT DATA REQUIREMENTS LIST (CDRL)

PRID : CB350-1

NSN : 4810-01-096-1056

DMWR : DMWR-1-1560-293

PRON : AX6M0171AX

FOR GOVERNMENT PERSONNEL

Item A. Self explanatory.

Item B. Self explanatory.

Item C. Mark (X) appropriate category: TDP - Technical Data Package; TM - Technical Manual; other category of data, such as 'Provisioning', 'Configuration Management', etc.

Item D. Enter name of system/item being acquired that data will support.

Item E. Self explanatory (to be filled in after contract award).

Item F. Self explanatory (to be filled in after contract award).

Item G. Signature of preparer of CDRL.

Item H. Date CDRL was prepared.

Item I. Signature of CDRL approval authority.

Item J. Date CDRL was approved.

Item 1. See DoD FAR Supplement Subpart 4.71 for proper numbering.

Item 2. Enter title as it appears on data acquisition document cited in item 4.

Item 3. Enter subtitle of data item for further definition of data item (optional entry).

Item 4. Enter Data Item Description (DID) number, military specification number, or military standard number listed on DoD 5010.12-L (AMSDL), or one-time DID number, that defines data content and format requirements.

Item 5. Enter reference to tasking in contract that generates Requirement for the data item (e.g., Statement of Work paragraph number).

02/12/2016 AMCOM M&O TDPL PAGE 40

CONTRACT DATA REQUIREMENTS LIST (CDRL)

PRID : CB350-1

NSN : 4810-01-096-1056

DMWR : DMWR-1-1560-293

PRON : AX6M0171AX

Item 6. Enter technical office responsible for ensuring adequacy of the data item.

Item 7. Specify requirement for inspection/acceptance of the data item by the Government.

Item 8. Specify requirement for approval of a draft before preparation of the final data item.

Item 9. For technical data, specify requirement for contractor to mark the appropriate distribution statement on the data (ref DoDD 5230.24).

Item 10. Specify number of times data items are to be delivered.

Item 11. Specify as-of-date of data item, when applicable.

Item 12. Specify when first submittal is required.

Item 13. Specify when subsequent submittals are required, when applicable.

Item 14. Enter addressees and number of draft/final copies to be delivered to each addressee. Explain reproducible copies in item 16.

Item 15. Enter total number of draft/final copies to be delivered.

Item 16. Use for additional/clarifying information for items 1 through 15. Examples are: Tailoring of document cited in item 4; clarification of submittal dates in items 12 and 13; Explanation of reproducible copies in item 14; Desired medium for delivery of the data item.

Item 17. Specify appropriate price group from one of the following groups of effort in developing estimated prices for each data item listed in DD Form 1423.

a. Group I. Definition - Data which is not otherwise essential to the contractor's performance of the primary contracted effort (production, development, testing, and administration) but which is required by DD Form 1423.

Estimated Price - Costs to be included under Group I are those applicable to preparing and assembling the data item in conformance with Government requirements, and the administration and other expenses related to reproducing and delivering such data items to the Government.

02/12/2016 AMCOM M&O TDPL PAGE 41

CONTRACT DATA REQUIREMENTS LIST (CDRL)

PRID : CB350-1

NSN : 4810-01-096-1056

DMWR : DMWR-1-1560-293

PRON : AX6M0171AX

b. Group II. Definition - Data which is essential to the performance of primary contracted effort but the contractor is required to perform additional work to conform to Government requirements with regard to depth of content, format, frequency of submittal, preparation, control, or quality of the data item.

Estimated Price - Costs to be included under Group II are those incurred over and above the cost of the essential data item without conforming to Government requirements, and the administrative and other expenses related to reproducing and delivering such item to the Government.

c. Group III. Definition - Data which the contractor must develop for his internal use in performance of the primary contracted effort and does not require any substantial change to conform to Government requirements with regard to depth of content, format, frequency of submittal, preparation, control and quality of the data item.

Estimated Price - Costs to be included under Group III are the administrative and other expenses related to reproducing and delivering such data item to the Government.

d. Group IV. Definition - Data which is developed by the contractors part of his normal operation procedures and his effort in supplying these data items to the Government.

Estimated Price - Group IV items should normally be shown on DD Form 1423 at no cost.

Item 18. For each data item, enter an amount equal to that portion of the total price, which is estimated to be attributable to the production or development for the Government of that item of data. These estimated data prices shall be developed only from those costs which will be incurred as a direct result of the requirement to supply the data, over and above those costs which would otherwise be incurred in the performance of the contract if no data was required. The estimated data prices shall not include any amount for the rights in data. The Government's right to use the data shall be governed by the pertinent provision of the contract.

02/12/2016 AMCOM M&O TDPL PAGE 42

MAINTENANCE AND OVERHAUL REQUIREMENT DATA PACKAGE - TRANSPORTATION

PRID : CB350-1

NSN : 4810-01-096-1056

DMWR : DMWR-1-1560-293

PRON : AX6M0171AX

AMSAM-MSC-CDT

MEMORANDUM FOR AMSAM-MAV-C (ATTN: Commercial M&O)

SUBJECT: Maintenance and Overhaul Requirement Data Package for HYDRAULIC VALVE, NSN: 4810-01-096-1056, P/N: 13117-1, PRID: CB350-1, SYSTEM: UH-60

1. Free-On-Board (FOB) Origin delivery terms are recommended for subject maintenance and overhaul requirement.

2. When procurement is competitive and exact destinations are not known and it is impractical to establish tentative or general delivery places for the purpose of evaluating transportation costs, evaluation or transportation costs will not be a factor for award (FAR 52.247-50). If destinations are determined prior to release of Request for Proposal, a transportation cost evaluation can be performed. The following Federal Acquisition regulation (FAR) clauses should be included:

52.247-46 - Shipping Point(s) used in Evaluation of FOB Origin Offers 52.247-47 - Evaluation - FOB Origin

3. In the event materiel is consigned to an overseas addressee, the following clauses/instructions apply

(FAR 47.301-3):

FAR 52.247-52 - Clearance and Documentation Requirements - Shipments to DoD Air or Water Terminal Transshipment Points DFAR 252-247-7022 - Representation of Extent of Transportation by Sea DFAR 252-247-7023 - Transportation of Supplies by Sea DFAR 252-247-7024 - Notification of Transportation of Supplies by Sea Overseas shipments should move in the Defense Transportation System and must comply with the Defense Transportation Regulation.

All shipments must comply with In-Transit Visibility (ITV) requirements by providing movement data to Global Transportation network via Electronic Data Interchange using American National Standards Institute (ANSI) X12 codes.

02/12/2016 AMCOM M&O TDPL PAGE 43

MAINTENANCE AND OVERHAUL REQUIREMENT DATA PACKAGE - TRANSPORTATION

NSN : 4810-01-096-1056

DMWR : DMWR-1-1560-293

PRON : AX6M0171AX

4. The FAR clauses shown on the enclosed Transportation Requirement form should be included in the procurement package.

5. FMS Portion-Customer Document Number, when issued will determine whether the U.S. Government or the FMS Customer Country will be responsible for Transportation from Contractor Source to Final Destination (FAR 52.247-29).

FAR Clause 52.247-29 pertains to the FMS and US portions of the contract; all other clauses pertain to the US portion.

6. Point of contact is SCHARF, TIFFANY, (256)842-8355, AMSAM-MSC-CDT.

Debra L. Finley