Special_Packaging_Instruction_M2_Cargo.pdf

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 2 Designed using Perform Pro, WHS/DIOR, Jun 97

SPECIAL PACKAGING INSTRUCTION

Form Approved OMB No. 0704-0188

-WR

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, Gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of Information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB Control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

11-1-565-2 (81337) Release, Cargo Parachute, M2 81337 AB10978817

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

1670-01-097-8817 04/20/2017

7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)

1 EACH NONE 110.0 2.250 24.0 X 12.0 X 13.5

12. MILITARY PRESERVATION 18.

STEPS

19.

REQD

20.

DESCRIPTION

MIL-STD-2073-1, SEE NOTES C & D

13. CLEANING 1 A/R ITEM CONTENTS & PREPAPATION: SEE NOTE B

MIL-STD-2073-1 2 A/R ITEM CONSOLIDATION: SEE NOTE C

14. DRYING

MIL-STD-2073-1

15. PACKING

a. LEVEL A

MIL-STD-2073-1 & NOTE G

b. LEVEL B

N/A

16. MARKING

MIL-STD-129 & NOTE E

17. NOTES/DRAWING

A. INSPECT THE PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1. INSPECT THE PACKING IN ACCORDANCE WITH MIL-STD-1186 AND THE APPLICABLE CONTAINER SPECIFICATION.

B. PREPARE SEGREGATED PACK AS FOLLOWS:

SEGREGATED PACK & DESCRIPTION: ARMING WIRE AND LANYARD ASSEMBLY

1. THE ARMING WIRE AND LANYARD ASSEMBLY SHALL BE PACKAGED IN A BARRIER BAG.

2. BAG: MIL-DTL-117, TY III, CL B, ST 2, CLOSE BAG BY HEAT SEAL.

3. IDENTIFICATION: IDENTIFY THE ITEM WITH “ARMING WIRE AND LANYARD ASSEMBLY”.

4. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1, CRITERIA FOR PRESERVATION, METHOD 31.

SEGREGATED PACK & DESCRIPTION: LOWER SUSPENSION LINK

1. EACH LOWER SUSPENSION LINK SHALL BE PACKAGED SEPARATELY IN FIBERBOARD BOXES.

2. BOX: ASTM-D5118, TYPE CF, CLASS WEATHER RESISTANT, CORRUGATED FIBERBOARD BOX .

CLOSE CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B1.

3. IDENTIFICATION: IDENTIFY THE ITEM WITH “LOWER SUSPENSION LINK”.

4. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1, CRITERIA FOR PRESERVATION, METHOD 10.

SEGREGATED PACK & DESCRIPTION: PARACHUTE CONNECTORS

1. THE PARACHUTE CONNECTORS WILL BE INDIVIDUALLY WRAPPED IN TISSUE THEN PLACED

FOUR (4) EACH INTO A FIBERBOARD BOX

2. BOX: ASTM-D5118, TYPE CF, CLASS WEATHER RESISTANT, CORRUGATED FIBERBOARD BOX .

CLOSE CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B1.

3. IDENTIFICATION: IDENTIFY THE ITEM WITH “PARACHUTE CONNECTORS”.

4. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1, CRITERIA FOR PRESERVATION, METHOD 10.

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 2 Designed using Perform Pro, WHS/DIOR, Jun 97

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)

Form Approved -WR OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

11-1-565-2 (81337) Release, Cargo Parachute, M2 81337 AB10978817

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

1670-01-097-8817 04/20/2017

17. NOTES/DRAWING

SEGREGATED PACK & DESCRIPTION: TIMER DELAY ASSEMBLY

1. THE TIMER DELAY ASSEMBLY WILL BE INDIVIDUALLY CUSHIONED, BAGGED, THEN PLACED

INTO A FIBERBOARD BOX

2. CUSHION: PPP-C-795, CELLULAR PLASTIC FILM CUSHIONING; OR A-A-3129, OPEN CELL

PLASTIC CUSHIONING; OR PPP-C-1797, POLYPROPYLENE FOAM CUSHIONING; OR A-A-59136,

POLYETHYLENE FOAM CUSHIONING

3. BAG: MIL-DTL-117, TY III, CL B, ST 2, CLOSE BAG BY HEAT SEAL.

4. BOX: ASTM-D5118, TYPE CF, CLASS WEATHER RESISTANT, CORRUGATED FIBERBOARD BOX .

CLOSE CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B1.

5. IDENTIFICATION: IDENTIFY THE ITEM WITH “TIMER DELAY ASSEMBLY”.

6. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1, CRITERIA FOR PRESERVATION, METHOD 31.

SEGREGATED PACK & DESCRIPTION: TOGGLE LOCK SLIDES

1. THE TOGGLE LOCK SLIDES WILL BE INDIVIDUALLY WRAPPED IN TISSUE THEN PLACED IN A

BARRIER BAG

2. BAG: MIL-DTL-117, TY III, CL B, ST 2, CLOSE BAG BY HEAT SEAL.

3. IDENTIFICATION: IDENTIFY THE ITEM WITH “TOGGLE LOCK SLIDES”.

4. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1, CRITERIA FOR PRESERVATION, METHOD 31.

SEGREGATED PACK & DESCRIPTION: M2 UNIT

1. M2 UNIT WILL BE DOUBLE WRAPPED IN KRAFTED PAPER AND SECURED WITH TAPE.

2. IDENTIFICATION: IDENTIFY THE ITEM WITH “M2 UNIT”.

3. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1, CRITERIA FOR PRESERVATION, METHOD 10.

C. CONSOLIDATION: COMBINE ITEMS FROM NOTE B, IN ACCORDANCE WITH THE FOLLOWING:

1. CONTAINER: ASTM-D6251, TYPE III, CLASS 2, WOOD CLEATED PLYWOOD BOX, OVERSEAS

11--11//44 IINN TTHHIICCKK HHOONNEEYYCCOOMMBB MMAATTEERRIIAALL AATT BBOOTTTTOOMM OOFF CCOONNTTAAIINNEERR AANNDD IINNSSIIDDEE OOFF TTOOPP

CCOOVVEERR..

2. TTHHEE FFIIBBEERRBBOOAARRDD BBOOXXEESS AANNDD BBAAGGSS WWIILLLL BBEE PPLLAACCEEDD AATT OONNEE EENNDD OOFF TTHHEE BBOOXX AANNDD AA PPAADD OOFF HHOONNEEYYCCOOMMBB MMAATTEERRIIAALL WWIILLLL BBEE PPLLAACCEEDD WWIIDDTTHH WWIISSEE AACCRROOSSSS TTHHEE BBOOXX DDIIVVIIDDIINNGG TTHHEE MM22

UUNNIITT FFRROOMM TTHHEE BBOOXXEESS..

3. CUSHION, ANCHOR, BLOCK OR BRACE IN ACCORDANCE WITH MIL-STD- 1186.

4. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1, CRITERIA FOR PRESERVATION, METHOD 10.

D. PROVIDE A PACKING LIST WITH THE UNIT PACK IN ACCORDANCE WITH MIL-STD-129 IDENTIFYING

THE INCLUDED ITEMS

E. PACKING:

LEVEL A PACKING SHALL BE ACCOMPLISHED USING WOOD-CLEATED PANELBOARD SHIPPING

BOXES, CONFORMING TO ASTM-D 6251, TYPE III, CLASS 2 OR NAILED WOOD BOXES CONFORMING

TO ASTM-D 6880, CLASS 2.