Spec_-_Toyota_HiLux.doc

Specification Attachment 0001 January, 2018

TOYOTA HILUX 4x4

THE VEHICLE SHALL BE PROVIDED WITH ALL NEW PARTS AND PROVIDE THE FOLLOWING

MINIMUM EQUIPMENT AND CAPABILITIES:

1. CONFIGURATION

1.1. The vehicle shall be a Toyota Hilux 4x4 crew cab pickup truck.

1.2. The vehicle shall be a 2017 model year or later with no more than 250 miles (402 km) on the odometer.

2. EQUIPMENT

2.1. The vehicle shall be equipped with all of the standard equipment found on a Toyota HiLux.

2.2. The vehicle shall be equipped with an “Eco/Power Mode” setting switch in the cabin.

2.3. A rearview camera shall be provided for backing up.

2.4. The vehicle shall be provided with a brush guard.

2.5. Front and rear fog lights shall be provided.

2.6. The vehicle shall be provided with a sliding type rear window.

2.7. The vehicle shall be provided with metric instruments and gauges.

2.8. Side steps shall be provided.

2.9. The vehicle shall be provided with a first aid kit, three triangles, and tow rope.

2.10. The vehicle shall be provided with a portable 12 volt air compressor kit with pump, hose, and fittings.

2.11. The vehicle shall be provided with storage for the first aid kit, three triangles, tow rope, and portable 12 volt air compressor kit.

2.12. Front and rear mud flaps shall be provided.

2.13. An ABC type fire extinguisher, minimum 2.2 pound (1 kilogram) capacity, with mounting bracket shall be provided and located inside cab.

2.14. All instruction diagrams and warning labels shall be in English, or in universal symbols, and shall be permanently affixed to the vehicle.

2.14.1. Fuel filler cap or area near fuel filler cap shall be labeled, with the type of fuel compatible with the vehicle, in English, or in universal symbols.

2.14.2. A vehicle manual(s) shall be provided with each vehicle, written in English.

3. ENGINE

3.1. Vehicle shall be equipped with the 165 cu.in. (2.7 liter) 4 cylinder, 164 hp (122 kW) gas engine.

4. CHASSIS/DRIVELINE/AXLES/SUSPENSION

4.1. The vehicle shall be provided with part time 4-wheel drive.

4.2. Vehicle shall be equipped with auto traction control.

4.3. Hill assist control and trailer sway control shall be provided.

5. TRANSMISSION

5.1.

Vehicle shall be provided with a 5 speed manual transmission.

5.2. A driver-selectable transfer case shall be provided.

6. STEERING

6.1.

Vehicle shall be provided with left hand drive, with tilt and power steering.

7. BRAKES

7.1. The vehicle shall be provided with:

7.1.1. Antilock Brake System (ABS)

7.1.2. Electronic Brakeforce Distribution (EBD)

7.1.3. Braking Assistance (BA)

8. WHEEL ASSEMBLY (TIRE AND WHEEL)

8.1. Vehicle shall be provided with tubeless, on-off road radial tires, with all terrain tread, size 265/65R17.

8.2. Vehicle shall be provided with 17 inch (43.18 cm) alloy wheels, and a full-size steel spare wheel assembly.

9. COLOR

9.1. The exterior color of the vehicle shall be the manufacturer’s white.

10. CORROSION PROTECTION

10.1. The entire vehicle (where applicable) shall be provided with Carwell (www.carwell.com) or an equivalent type of protection (e.g. Coating, e-coat, etc.) to prevent corrosion and rust. The Carwell protection shall be applied post DCMA inspection but prior to shipment.

10.1.1. If an equivalent type of corrosion protection product is utilized, the following minimum criteria shall be met:

10.1.2. The product shall protect the vehicle from exposure to a salt atmosphere (minimum 336 hours) during open ocean transport.

10.1.3. The product shall inhibit vehicle rust and corrosion.

10.1.4. The product shall protect the vehicle for a minimum of 2 years after application.

10.1.5. The product shall not contain any toxic or harmful materials.

10.1.6. Type of corrosion protection used may be different on different parts of the vehicle.

11. RADIO FREQUENCY IDENTIFICATION (RFID) TAGS

11.1. Each vehicle or item and associated lot of spares shall be tagged with a removable active RFID data rich tracking tag, specifically designated as:

11.1.1. Savi ST-654-041

11.1.2. Savi ST-654-031

11.1.3. Identec I-Q310 DRT

11.1.4. Evigia EV3-DRT

11.2. The tag shall be located on the exterior of the vehicle or item in a noticeable and easily observable spot. The tag for the spares shall be located in a noticeable and easily observable spot on the exterior of the pallet or container.

11.3. The tag shall be securely affixed to the vehicle or item in such a way that it cannot fall off. Securing the RFID tag with two or more plastic cable ties is the preferred method.

11.4. The tag data and electronic data field format shall be in accordance with specifications established by Joint Total Asset Visibility (JTAV) version 2.0, section 3.4.1 “Commodity Item Database Format” with the following clarifications:

11.4.1. The “document field” titled “DOCUMENT” shall be the document number (e.g. “milstrip”) as specified by the Government procuring agency.

11.4.2. The “MISC1” field shall be the item serial number, if available.

11.4.3. The “MISC2” field shall be used for user comments (e.g. contract number).