Spec_Toyota_Hiace.doc

Specification (Attachment 0001)

January 2018

TOYOTA HIACE

THE VEHICLE SHALL BE PROVIDED WITH ALL NEW PARTS, THE MANUFACTURER’S STANDARD EQUIPMENT, AND THE FOLLOWING MINIMUM EQUIPMENT AND CAPABILITIES:

1. CONFIGURATION

1.1. The vehicle shall be a Toyota Hiace, Super Long Wheelbase Commuter Bus with seating for 13 people.

1.2. The vehicle shall be a 2017 model year or later with no more than 250 miles (402 km) on the odometer.

2. EQUIPMENT

2.1. The vehicle shall be a Toyota Hiace with all standard equipment and the options specified herein.

2.2. Front and rear air conditioning shall be provided.

2.3. Metric gages shall be provided.

2.4. An ABC type fire extinguisher, minimum 2.2 pound (1.0 kg) capacity, with mounting bracket shall be provided.

2.5. The vehicle shall be provided with a first aid kit, three triangles, and tow rope.

2.6. The vehicle shall be provided with a portable 12 volt air compressor kit with pump, hose, and fittings.

2.7. The vehicle shall be provided with storage for the first aid kit, three triangles, tow rope, and portable 12 volt air compressor kit.

2.8. The vehicle shall be provided with front row rubber floor mats.

2.9. Vehicle language requirements:

2.9.1. All warning labels shall be in English, or in universal symbols, and shall be permanently affixed to the vehicle.

2.9.2. An operator manual shall be provided with every vehicle and written in English.

3. ENGINE

3.1. The vehicle shall be provided with a 2.7 liter 4 cylinder gasoline engine.

4. TRANSMISSION

4.1. The vehicle shall be provided with a manual transmission.

5. Steering

5.1. The vehicle shall be left-hand drive (LHD).

6. COLOR

6.1. The exterior color of the vehicle shall be OEM white.

7. RADIO FREQUENCY IDENTIFICATION (RFID) TAGS

7.1. Each vehicle or item and associated lot of spares shall be tagged with a removable active RFID data rich tracking tag, specifically designated as:

7.1.1. Savi ST-654-041

7.1.2. Savi ST-654-031

7.1.3. Identec I-Q310 DRT

7.1.4. Evigia EV3-DRT

7.2. The tag shall be located on the exterior of the vehicle or item in a noticeable and easily observable spot. The tag for the spares shall be located in a noticeable and easily observable spot on the exterior of the pallet or container.

7.3. The tag shall be securely affixed to the vehicle or item in such a way that it cannot fall off. Securing the RFID tag with two or more plastic cable ties is the preferred method.

7.4. The tag data and electronic data field format shall be in accordance with specifications established by Joint Total Asset Visibility (JTAV) version 2.0, section 3.4.1 “Commodity Item Database Format” with the following clarifications:

7.4.1. The “document field” titled “DOCUMENT” shall be the document number (e.g. “milstrip”) as specified by the Government procuring agency.

7.4.2. The “MISC1” field shall be the item serial number, if available.

7.4.3. The “MISC2” field shall be used for user comments (e.g. contract number).

8. CORROSION PROTECTION

8.1. The entire vehicle (where applicable) shall be provided with Carwell (www.carwell.com) or an equivalent type of protection (e.g. Coating, e-coat, etc.) to prevent corrosion and rust. The Carwell protection shall be applied post DCMA inspection but prior to shipment.

8.1.1. If an equivalent type of corrosion protection product is utilized, the following minimum criteria shall be met:

8.1.1.1. The product shall protect the vehicle from exposure to a salt atmosphere (minimum 336 hours) during open ocean transport.

8.1.1.2. The product shall inhibit vehicle rust and corrosion.

8.1.1.3. The product shall protect the vehicle for a minimum of 2 years after application.

8.1.1.4. The product shall not contain any toxic or harmful materials.

8.1.2. Type of corrosion protection used may be different on different parts of the vehicle.