W56HZV17R0207-0001.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. Contract ID Code Page Of

2. Amendment/Modification No.

3. Effective Date

4. Requisition/Purchase Req No.

5. Project No. (If applicable)

6. Issued By Code 7. Administered By (If other than Item 6) Code

8. Name And Address Of Contractor (No., Street, City, County, State and Zip Code)

9A. Amendment Of Solicitation No.

9B. Dated (See Item 11)

10A. Modification Of Contract/Order No.

10B. Dated (See Item 13) Code Facility Code

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in item 14. The hour and date specified for receipt of Offers is extended, is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing items 8 and 15, and returning ____________ copies of the amendments: (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. Accounting And Appropriation Data (If required)

13. THIS ITEM ONLY APPLIES TO MODIFICATIONS OF CONTRACTS/ORDERS

It Modifies The Contract/Order No. As Described In Item 14.

A. This Change Order is Issued Pursuant To: The Changes Set Forth In Item 14 Are Made In

The Contract/Order No. In Item 10A.

B. The Above Numbered Contract/Order Is Modified To Reflect The Administrative Changes (such as changes in paying office, appropriation data, etc.) Set

Forth In Item 14, Pursuant To The Authority of FAR 43.103(b).

C. This Supplemental Agreement Is Entered Into Pursuant To Authority Of:

D. Other (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return _______________ copies to the Issuing Office.

14. Description Of Amendment/Modification (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

Except as provided herein, all terms and conditions of the document referenced in item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. Name And Title Of Signer (Type or print)

16A. Name And Title Of Contracting Officer (Type or print)

15B. Contractor/Offeror 15C. Date Signed 16B. United States Of America 16C. Date Signed

By (Signature of person authorized to sign) (Signature of Contracting Officer)

NSN 7540-01-152-8070

PREVIOUS EDITIONS UNUSABLE

30-105-02 STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA FAR (48 CFR) 53.243

SEE SCHEDULE

X

Firm Fixed Price

0001 2017AUG17

W56HZV

U.S. ARMY CONTRACTING COMMAND

WARREN, MICHIGAN 48397-5000

KATHY KESSLER

EMAIL: KATHY.A.KESSLER.CIV@MAIL.MIL

W56HZV-17-R-0207

2017JUL31

X

X

/SIGNED/

2 signed

SEE SECOND PAGE FOR DESCRIPTION

1 3

CONTINUATION SHEET

Reference No. of Document Being Continued Page of

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION A - SUPPLEMENTAL INFORMATION

Buyer Name: KATHY KESSLER

Buyer Office Symbol/Telephone Number: CCTA-HDB-N/(586)282-3538

Type of Contract 1: Firm Fixed Price

Kind of Contract: Other

Weapon System: Nontactical Wheeled Vehicles

*** End of Narrative A0000 ***

Status Regulatory Cite Title Date Status Regulatory Cite Title Date _______ _______________ ______________________________________________________________________ ____________ _______ _______________ ______________________________________________________________________ ____________

A-1 CHANGED 52.214-4000 ACKNOWLEDGMENT OF AMENDMENTS OCT/1993

Acknowledge all the amendments you've received from us by identifying the amendment number and its issue date in the box below:

: Amendment Number : Date : ________________________________________________

: 0001 : : _______________________________________________

[End of Provision]

Amendment: 0001

Prepared by: KAK

Date Prepared: August 2017

1. Amendment 0001 is to update the specification (Attachment 0001) in Section J.

2. Attachment 0001, Dump Truck specification, 4.3 is changing from "Minimum 45 gallon (170 liter) fuel tank shall be provided" to

"Minimum 70 gallon (265 liter) fuel tank shall be provided".

3. Closing of solicitation remains at 31 August 2017, 3:00ET.

4. Except for stated here-in, all other terms and conditions of this solicitation remain the same.

*** END OF NARRATIVE A0002 ***

2 3

W56HZV-17-R-0207 0001

CONTINUATION SHEET

Reference No. of Document Being Continued Page of

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION J - LIST OF ATTACHMENTS

List of Number List of Number

Addenda Title Date of Pages Transmitted By Addenda Title Date of Pages Transmitted By________________ ____________________________________________________________ _______________ ____________ _______________________________ ____________________________________________________________ _______________ ____________ _______________

Attachment 0001 SPECIFICATIONS FOR 15 YRD DUMP TRUCK 10-AUG-2017 003 DATA

3 3

W56HZV-17-R-0207 0001

PIIN/SIIN

MOD/AMD

ATT/EXH ID

PAGE

Attachment 0001

Attachment 0001

Specification for 15yd Dump Truck

July 1, 2017

THE VEHICLE SHALL BE PROVIDED WITH ALL NEW PARTS, MANUFACTURERS STANDARD EQUIPMENT, AND THE FOLLOWING MINIMUM EQUIPMENT OR CAPABILITIES:

1. CONFIGURATION

1.1. The vehicle shall be a Dump Truck, 6x6, 2017 model year or later.

1.2. The Dump Truck shall be capable of safely loading, transporting, and dumping 15 yd3 (11.5 m3) of material.

1.3. Language requirements:

1.3.1 All instructions, diagrams, and warning labels shall be in English or universal symbols.

1.3.2 Operation, maintenance, and lubrication manuals, written in English, shall be provided for each vehicle.

1.3.3 Fuel filler cap or area near the fuel filler cap location shall be labeled with the type of fuel compatible with the vehicle in English or universal symbols.

2. EQUIPMENT

The vehicle shall be provided with all standard equipment and the options specified herein:

2.1. An exterior lighting package including headlights, taillights, brake lights, turn signals, back-up lights, and daytime running lights.

2.1.1. All forward facing lights shall have road debris protection on them.

2.2. Vehicle dash instrumentation display in metric.

2.3. Lockable toolbox(es) or secured storage compartment(s), of sufficient capacity to store all manufacturers standard equipment and accessories, and those specified below. All locks for the toolbox(es) or compartment(s) shall be identically keyed.

2.3.1. The vehicle shall be provided with the standard tools required for simple operator level maintenance (wrench and socket set, screwdrivers, adjustable wrench, pliers, and hammer at a minimum).

2.3.2. The vehicle shall be provided with tire inflating hose with pressure gauge and quick-connect fitting on both ends powered by the vehicles compressed air system and of sufficient length to inflate all tires on the vehicle.

2.4. Front and rear steel bumpers shall be installed on the vehicle.

2.5. Electric horn and air horn.

2.6. A 46 piece, 10 unit ANSI first aid kit.

2.6.1. Meets ANSI Z308.1-2003.

2.6.2. Cold compress and first aid booklet also included.

2.6.3. Metal case with gasket included to contain all items.

2.7. Rear tires covered by dump body structure, with rubber mud flaps behind rear-most tires.

2.8. Two front tow hooks.

2.9. ABC type fire extinguisher, 10 lb (4.5 kg) capacity, with mounting bracket.

3. RATINGS

3.1. Component ratings shall not exceed the manufacturers published ratings, and shall not be raised to meet requirements.

3.2. All individual components, including engine, transmission, driveline, frame, axles, suspension and tires shall be rated at or above the GVW specified for the vehicle.

4. ENGINE

4.1. The vehicle shall be provided with a low-sulfur diesel engine, capable of long-term operation on the diesel fuel available in

Serbia.

4.1.1. Engine shall have a minimum of 400 hp (298 kW).

4.2. Cold weather package for engine operation shall be provided. Consisting of:

4.2.1. An engine block heater.

4.2.2. Heated fuel and water separator shall be provided.

4.2.3. Fuel heater installed in the fuel tank or in the fuel line as close to the fuel tank as practical.

4.2.4. Fuel-fired heater plumbed in with the engine coolant.

4.3 Minimum 70 gallon (265 liter) fuel tank shall be provided.

5. DRIVELINE AND FRAME

5.1. The truck driveline configuration shall be a 6x6.

5.2. A rear axle shall be provided with a lockable or limited-slip differential.

5.3. The Resistance Bending Moment (RBM)of each frame rail shall be at least 2,500,000 in-lb.

6. TRANSMISSION

6.1. Vehicle shall be equipped with a manual transmission.

6.2. A two-speed transfer case shall also be provided.

W56HZV-17-R-0207

ATT/EXH ID

PAGE

Attachment 0001

7. STEERING

7.1. Vehicle shall be equipped with left-hand drive and power steering.

7.2. An adjustable tilt and telescoping steering column shall be provided.

8. BRAKES

8.1. The service brakes on the vehicle shall be an air brake system with ABS.

8.2. The vehicle must also be provided with an engine brake.

9. WHEEL ASSEMBLY (TIRE AND WHEEL)

9.1. All tires, including the spare, shall be the same radial tires rated for mud and snow.

9.2. All wheels shall be the same and made of steel.

10. ELECTRICAL

10.1. An amber rotating beacon, LED, or strobe-type warning light bar shall be installed on the top of the cab.

10.2. The vehicle shall have a back-up alarm.

10.3. Additional lighting shall be installed for off-highway, night-time dumping operations. Including:

10.3.1. An off-road, LED light bar mounted on top-center of front bumper, minimum 10,000 lumens.

10.3.2. LED lights mounted at the rear of dump body sufficient to illuminate the dumping area, minimum 5,000 lumens.

10.4. An AM/FM/WB radio with CD player, Bluetooth with auxiliary inputs.

11. PERFORMANCE

11.1. Vehicle shall be capable of being stored, started, and operated in temperatures ranging from -25 to 110 degree F ( 32 to 43 degree Celsius).

11.2. The vehicle shall have a minimum 70 gallon (265 liter) fuel tank.

12. COLOR

12.1. Exterior color of the vehicles cab and entire dump body shall be Army Green 491, color chip 24070, in accordance with FED-STD-

595C, or the manufacturers closest equivalent.

13. CAB

13.1. A two-door cab shall be provided, able to accommodate driver and one passenger.

13.2. Seatbelts shall be provided for both cab occupants.

13.3. Air or hydraulically dampened driver seat and fixed passenger seat shall be provided.

13.4. Heated, flat, primary side-view mirrors shall be provided on exterior of cab, with left-hand and right-hand convex mirrors mounted near them.

13.5. Left and right side grab handles shall be provided for exterior of cab.

13.6. Manufacturers heavy duty air conditioning, heating and defrosting systems shall be provided.

14. DUMP BODY

14.1. The vehicle shall have a 15 yd3 (11.5 m3) dump body with a dump angle of approximately 45\'b0.

14.2. The dump body payload capacity shall be at least 2,400 lbs (1,088 kg) per yd3.

14.3. The dump body shall be semi-elliptical and have:

14.3.1. Sides, front wall, and floor made from \'bc inch (6.35 mm), AR400 steel.

14.3.2. Spreader apron made from \'bc inch (6.35 mm), AR400 steel.

14.3.3. A front-mounted telescopic hoist with dog house.

14.3.3.1. Hydraulic cylinder with greaseable pins.

14.3.4. Air-operated tail-gate latches.

14.3.5. 1/2 cab guard.

14.3.6. Heavy-duty rear hinges with greaseable and removable pins.

14.3.7. PTO with heavy-duty, hydraulic pump.

14.3.8. Ladders permanently attached on both sides.

14.3.9. Body up safety prop.

14.3.10. Body up indicator light.

14.3.11. LED lighting, reflectors and conspicuity striping installed per DOT.

14.3.12. Rear butt plate with:

14.3.12.1. A pintle hook

14.3.12.2. A 7-pin connector

14.3.12.3. Glad hands

14.3.12.4. Two D-rings.

15. RADIO FREQUENCY IDENTIFICATION (RFID) TAG

15.1. Each vehicle or item and associated lot of spares shall be tagged with a removable active RFID data rich tracking tag, specifically designated as:

ATT/EXH ID

PAGE

Attachment 0001

15.1.1. Savi ST-654-041

15.1.2. Savi ST-654-031

15.1.3. Identec I-Q310 DRT

15.1.4. Evigia EV3-DRT

15.2. The tag shall be located on the exterior of the vehicle or item in a noticeable and easily observable spot. The tag for the spares shall be located in a noticeable and easily observable spot on the exterior of the pallet or container.

15.3. The tag shall be securely affixed to the vehicle or item in such a way that it cannot fall off. Securing the RFID tag with two or more plastic cable ties is the preferred method.

15.4. The tag data and electronic data field format shall be in accordance with specifications established by Joint Total Asset

Visibility (JTAV) version 2.0, section 3.4.1 Commodity Item Database Format with the following clarifications:

15.4.1. The document field titled DOCUMENT shall be the document number (e.g. milstrip) as specified by the Government procuring agency.

15.4.2. The MISC1 field shall be the item serial number, if available.

15.4.3. The MISC2 field shall be used for user comments (e.g. contract number).

15.4.4. The JTAV - V2.0 data format specification is available at:

http://www.ndia.org/Divisions/Divisions/Logistics/Documents/Content/ContentGroups/Divisions1/Logistics/4RF_Tag_Data_Specification_V2.pdf