Special_Packaging_Instructions_ACPRS_SPI_NO_AK16084698.pdf

SPECIAL PACKAGING INSTRUCTION

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

11-1-9082 ADVANCED CARGO PARACHUTE RELEASE 81337 AK16084698

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

1670-01-608-4698 5/25/2017 A

7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)

1 EACH NONE 51.2 1.851 21-1/2 X 17-1/2 X 8-1/2

12. MILITARY PRESERVATION 18.

STEPS

19.

REQD

20.

DESCRIPTION

MIL-STD-2073-1D, METHOD 32

13. CLEANING SEE NOTES FOR PACKAGING DETAILS.

MIL-STD-2073-1D

14. DRYING

MIL-STD-2073-1D

15. PACKING

a. LEVEL A

MIL-STD-2073-1D & NOTE F

b. LEVEL B

NOT APPLICABLE

16. MARKING

MIL-STD-129

17. NOTES/DRAWING

A. INSPECT THE PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1D. INSPECT THE PACKING IN ACCORDANCE WITH MIL-STD-1186 AND THE APPLICABLE CONTAINER SPECIFICATION.

B. SSYYSSTTEEMM CCOONNTTEENNTTSS:: TTHHIISS SSYYSSTTEEMM CCOONNTTAAIINNSS TTHHEE FFOOLLLLOOWWIINNGG IITTEEMMSS SSEEGGRREEGGAATTEEDD AASS SSHHOOWWNN BBEELLOOWW::

SSEEGGRREEGGAATTEEDD

QTY NAME PART NUMBER CAGE PACK NUMBER

1 ADVANCED CARGO PARACHUTE RELEASE 11-1-9082 81337 1

5 CONNECTOR, PARACHUTE RELEASE 11-1-3718-1 81337 1

1 LANYARD, ARMING WIRE 11-1-487 81337 1

1 LINK ASSEMBLY, COUPLING 11-1-9468-1 81337 2

1 ARM, LOWER SUSPENSION 11-1-9450-1 81337 2

2 PLATE, SIDE 11-1-9454-1 81337 2

3 BOLT, SHOULDER, 3/4 DIAMETER X 2.3 GRIP

LENGTH HEX HEAD 5/8-18 THD 11-1-9451-1 81337 2

3 NUT, SELF-LOCKING, HEXAGON, (LOCKNUT)

5/8-18 X 15/16W GRADE 8 STEEL ZINC PLATED ASMEB18.16.6 2

1 SPACER, SLEEVE, 1.25 IN. OD 11-1-9452-1 81337 2

2 SPACER, SLEEVE, 1.5 IN. OD 11-1-9453-1 81337 2

1 LINK ASSEMBLY, COUPLING 11-1-9468-1 81337 3

1 ARM, LOWER SUSPENSION 11-1-9450-1 81337 3

2 PLATE, SIDE 11-1-9454-1 81337 3

3 BOLT, SHOULDER, 3/4 DIAMETER X 2.3 GRIP

LENGTH HEX HEAD 5/8-18 THD 11-1-9451-1 81337 3

3 NUT, SELF-LOCKING, HEXAGON, (LOCKNUT)

5/8-18 X 15/16W GRADE 8 STEEL ZINC PLATED ASMEB18.16.6 3

1 SPACER, SLEEVE, 1.25 IN. OD 11-1-9452-1 81337 3

2 SPACER, SLEEVE, 1.5 IN. OD 11-1-9453-1 81337 3

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 4 Pages Designed using Perform Pro, WHS/DIOR, Jun 97

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

11-1-9082 ADVANCED CARGO PARACHUTE RELEASE 81337

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

5/25/2017

17. NOTES/DRAWINGS CONTINUED

C. PLACE ITEMS INTO VACUUM BAG, CLOSE BAG BY VACUUM SEALING, ITEM 1.

CONNECTOR, PARACHUTE RELEASE, AND ONE 11-1-487 LANYARD, ARMING WIRE IN ACCORDANCE

WITH THE STEPS BELOW:

11.. BBAAGG:: MMIILL--DDTTLL--111177,, TTYYPPEE II,, CCLLAASSSS EE,, SSTTYYLLEE 11,, SSIIZZEE:: 30 X 16.. AAFFTTEERR PPLLAACCIINNGG IITTEEMMSS IINN BBAAGG,, CCLLOOSSEE

BBAAGG BBYY VACUUM SSEEAALLIINNGG..

22.. IIDDEENNTTIIFFIICCAATTIIOONN:: IIDDEENNTTIIFFYY TTHHEE BBAAGG WWIITTHH SSEEGGRREEGGAATTEEDD PPAACCKK NNUUMMBBEERR ““11””..

33.. IINNSSPPEECCTTIIOONN:: IINNSSPPEECCTT SSEEGGRREEGGAATTEEDD PPAACCKK IINN AACCCCOORRDDAANNCCEE WWIITTHH CCRRIITTEERRIIAA FFOORR MMEETTHHOODD 3311..

E. PREPARE ONE 11-1-9468-1 LINK ASSEMBLY, COUPLING, ONE 11-1-9450-1 ARM, LOWER SUSPENSION, TWO 11-1-9454-1 PLATE, SIDE, THREE 11-1-9451-1 BOLT, SHOULDER, 3/4 DIAMETER X 2.3 GRIP LENGTH HEX HEAD 5/8-18 THD, THREE ASME B18.16.6 NUT, SELF-LOCKING, HEXAGON, (LOCKNUT) 5/8-18 X 15/16W GRADE 8 STEEL ZINC PLATED, ONE 11-1-9452-1 SPACER, SLEEVE, 1.25 IN. OD, AND TWO 11-1-9453-1

SPACER, SLEEVE, 1.5 IN. OD IN ACCORDANCE WITH THE STEPS BELOW:

11.. BBAAGG:: MMIILL--DDTTLL--111177,, TTYYPPEE II,, CCLLAASSSS EE,, SSTTYYLLEE 11,, SSIIZZEE:: 30 X 16.. AAFFTTEERR PPLLAACCIINNGG IITTEEMMSS IINN BBAAGG,, CCLLOOSSEE

BBAAGG BBYY VACUUM SSEEAALLIINNGG..

22.. IDENTIFICATION: IDENTIFY THE BAG WITH SEGREATED PACK NUMBER "2"

33.. IINNSSPPEECCTTIIOONN:: IINNSSPPEECCTT SSEEGGRREEGGAATTEEDD PPAACCKK IINN AACCCCOORRDDAANNCCEE WWIITTHH CCRRIITTEERRIIAA FFOORR MMEETTHHOODD 3311..

11.. BBAAGG:: MMIILL--DDTTLL--111177,, TTYYPPEE II,, CCLLAASSSS EE,, SSTTYYLLEE 11,, SSIIZZEE:: 30 X 16.. AAFFTTEERR PPLLAACCIINNGG IITTEEMMSS IINN BBAAGG,, CCLLOOSSEE

BBAAGG BBYY VACUUM SSEEAALLIINNGG..

22..

33.. IINNSSPPEECCTTIIOONN:: IINNSSPPEECCTT SSEEGGRREEGGAATTEEDD PPAACCKK IINN AACCCCOORRDDAANNCCEE WWIITTHH CCRRIITTEERRIIAA FFOORR MMEETTHHOODD 3311..

G. CONSOLIDATE ITEMS FORM NOTES D THROUGH F IN ACCORDANCE WITH THE STEPS BELOW:

11.. CCOONNTTAAIINNEERR:: AASSTTMM--DD 55111188,, TTYYPPEE CCFF,, CCLLAASSSS WWRR,, VVAARRIIEETTYY SSWW,, GGRRAADDEE WW55CC,, SSTTYYLLEE RRSSCC,, SSIIZZEE:: 2211--11//22

XX 1177--11//22 XX 88--11//22..

22.. CCLLOOSSUURREE:: SSHHAALLLL BBEE IINN AACCCCOORRDDAANNCCEE WWIITTHH AASSTTMM--DD 11997744,, MMEETTHHOODD 22BB33..

3 IINNSSPPEECCTTIIOONN:: IINNSSPPEECCTT CCOONNSSOOLLIIDDAATTIIOONN PPAACCKK IINN AACCCCOORRDDAANNCCEE WWIITTHH CCRRIITTEERRIIAA FFOORR MMEETTHHOODD 1100..

44.. MMAARRKK CCOONNSSOOLLIIDDAATTIIOONN PPAACCKK WWIITTHH NNOOTTEE:: ““TTHHIISS BBOOXX CCOONNTTAAIINNSS SSEEGGRREEGGAATTEEDD PPAACCKKSS 11 TTHHRROOUUGGHH

3."

H. PREPARE CONTAINER WITH CUSHIONING AS SHOWN ON PAGE 3. PLACE ONE 21 X 17 X 1 CUSHIONING

INTO THE BOTTOM OF BOX. PLACE CUSHIONING WITH CUT OUT AREA FOR BAGGED ASSEMBLY, ITEM

2, INTO THE CONTAINER.

I. PLACE BAGGED PART INTO PREPARED CONTAINER AND PLACE 21 X 17 X 1 CUSHIONING, ITEM 3, ON

TOP OF THE CUT OUT CUSHIONING TO COMPLETE THE CUSHIONING ENCLOSURE OF THE PARTS.

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 4 Pages

A

D. PREPARE ONE 11-1-9082 ADVANCED CARGO PARACHUTE RELEASE, FIVE 11-1-3718-1

F. PREPARE ONE 11-1-9468-1 LINK ASSEMBLY, COUPLING, ONE 11-1-9450-1 ARM, LOWER SUSPENSION, TWO 11-1-9454-1 PLATE, SIDE, THREE 11-1-9451-1 BOLT, SHOULDER, 3/4 DIAMETER X 2.3 GRIP LENGTH HEX HEAD 5/8-18 THD, THREE ASME B18.16.6 NUT, SELF-LOCKING, HEXAGON, (LOCKNUT) 5/8-18 X 15/16W GRADE 8 STEEL ZINC PLATED, ONE 11-1-9452-1 SPACER, SLEEVE, 1.25 IN. OD, AND TWO 11-1-9453-1

SPACER, SLEEVE, 1.5 IN. OD IN ACCORDANCE WITH THE STEPS BELOW:

DENTIFICATION: IDENTIFY THE BAG WITH SEGREATED PACK NUMBER "3"

OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

11-1-9082 ADVANCED CARGO PARACHUTE RELEASE 81337

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

5/25/2017

17. NOTES/DRAWINGS CONTINUED

J. CLOSE CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B3.

K. PROVIDE A PACKING LIST WITH THE UNIT PACK IN ACCORDANCE WITH MIL-STD-129 IDENTIFYING THE IITTEEMMSS WWIITTHH TTHHEE SSYYSSTTEEMM.. OONN TTHHEE PPAACCKKIINNGG LLIISSTT,, IIDDEENNTTIIFFYY TTHHEE IITTEEMMSS WWIITTHHIINN EEAACCHH SSEEGGRREEGGAATTEEDD PPAACCKK TTOOGGEETTHHEERR WWIITTHH TTHHEEIIRR SSEEGGRREEGGAATTEEDD PPAACCKK NNUUMMBBEERR.

L. LEVEL A: THE UNIT CONTAINER IS AN ACCEPTABLE LEVEL A SHIPPING CONTAINER WHEN SEALED AND

REINFORCED IN ACCORDANCE WITH ASTM-D1974.

M. INSPECT THE PRESERVATION, THE UNIT PACK AND THE PACKING IN ACCORDANCE WITH

MIL-STD-2073-1D AND THE APPLICABLE CONTAINER SPECIFICATION.

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 3 of 4 Pages

A

OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

11-1-9082 ADVANCED CARGO PARACHUTE RELEASE 81337

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

5/25/2017

17. NOTES/DRAWINGS CONTINUED

BILL OF MATERIALS

ITEM

NUMBER DESCRIPTION SIZE SPECIFICATION DATA QTY.

BAG

CUSHIONING

30 X 16

21 X 17 X 6

MIL-DTL-117, TYPE I,

CLASS E,

STYLE 1.

A-A-59136, TYPE I,

CLASS 1,

GRADE A.

3 CUSHIONING 21 X 17 X 1 A-A-59136, TYPE I,

CLASS 1,

GRADE A.

4 CONTAINER 21-1/2 X 17-1/2 X 8-1/2 ASTM-D5118, TYPE CF,

STYLE RSC, VARIETY SW,

CLASS WR, GRADE W5C.

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 4 of 4 Pages

A