W564KV-17-R-0001-0001.pdf

0010814154

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of this amendment is to update the attachments in section J based on questions provided by prospective contractors as w ell as remove language in paragraph L3.4.1(a). Additionally, changes have been made to PWS paragraphs 5.5.1.2 and 5.5.1.3 as w ell as PWS Attachment C - JMRC Planning Model, IAW FAR 43.103(b)(1).

a. As a result of this amendment, Attachment 0001, Attachment 0004, Attachment 0005 w ere updated and Attachment 0008 and Attachment 0009 w ere added to Section J.

b. As a result of this amendment, paragraph L3.4.1(a) w as updated, removing the language requireing a labor-rate buildup.

c. As a result of this amendment PWS paragraphs 5.5.1.2, 5.5.1.3 and PWS Attachemtn C - JMRC Planning model have been changed.

d. As a result of this amendment, clause 5152.204-4003 Anti-Mafia Law (Italy) has been removed.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 11

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 04-Nov-2016

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X W564KV-17-R-0001

X 9B. DATED (SEE ITEM 11)

20-Oct-2016

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

04-Nov-2016

CODE

TCC-KAISERSLAUTERN

KLEBER KASERNE MANNHEIMER STRASSE 238

BLDG 3233

67657 KAISERSLAUTERN

GERMANY

W564KV 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

W564KV-17-R-0001

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION I - CONTRACT CLAUSES

The following have been deleted:

5152.204-4003 ANTI-MAFIA LAW REQUIREMENTS (ITALY) JUN 2016

SECTION J - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS

The following have been modified:

LIST OF ATTACHMENTS

Attachment 0001 Performance Work Statement (PWS) 4 Nov 2016

Attachment 0002 DD254 1 Mar 2016

Attachment 0003 Subcontracting Matrix 1 Sept 2016

Attachment 0004 Past Performance Questionnaire 4 Nov 2016

Attachment 0005 Cost/Price Matrix 4 Nov 2016

Attachment 0006 Draft RFP Q&As 1 Sept 2016

Attachment 0007 JMSC Security Standard Operating Procedures 19 Oct 2016

Attachment 0008 TDY Travel Data 4 Nov 2016

Attachment 0009 RFP Q&As 4 Nov 2016

SECTION L - INSTRUCTIONS, CONDITIONS AND NOTICES TO BIDDERS

The following have been modified:

INSTRUCTIONS TO OFFERORS

L.1 SUBMISSION OF OFFERS

L.1.1 Purpose: These instructions prescribe the format of proposals and describe the approach for the development and presentation of the proposal data. They are designed to ensure the submission of information essential to the understanding and comprehensive validation of proposals. Offerors are cautioned to follow the instructions carefully.

L.1.2 Submission: Both electronic and hard copy proposals are required, as detailed below, on or before the date and time set for receipt of proposals. An Offeror that fails to submit both an electronic copy and hard copy proposal will be deemed non-compliant and will not be evaluated or further considered for award. Submission of proposals via email is not authorized. All offers must be submitted in ENGLISH or with English translation. English translation will control for offers submitted using such IAW FAR 52.225-14. Offers submitted in other than English and without English translation will be determined “Unacceptable” and eliminated from competition.

a. Proposals shall be received no later than the due date and time specified for receipt of proposals via one of the addressees listed below. Offerors are advised that the Contracting Office is located on a military installation and gate access is required to enter and deliver proposals. Additionally, the base post office is closed on U.S. Federal holidays.

If sent by mail U.S. Mailing Address:

If hand delivered Local/Physical Address:

Theater Contracting Center ATTN: Aaron Schulz Solicitation No. W564KV-17-R-0001 Unit 23152

APO, AE 09054

Theater Contracting Center ATTN: Aaron Schulz Solicitation No. W564KV-17-R-0001 Bldg. 3233 Kleber Kaserne 67657 Kaiserslautern, Germany

b. Contract Inquiry: All questions shall be submitted to Ms. Jana Bunch, Contract Specialist, jana.j.bunch.civ@mail.mil AND Mr. Aaron M. Schulz, Contracting Officer, aaron.m.schulz.civ@mail.mil no later than 10 calendar days after issuance of the solicitation. The subject of the e-mail(s) shall be “W564KV-17-R-0001 - Mission Command Training Support.”

Questions shall annotate a reference to the specific solicitation factor to which they pertain. The Government is not obligated to provide responses to all questions submitted by Offerors, but will consider them and incorporate changes into the RFP as deemed necessary. Government responses to questions will be incorporated via an amendment to the RFP for review by all Offerors; therefore, do not mark questions/comments with a restrictive legend and do not include proprietary information. It is the responsibility of the offeror to access FedBizOpps (www.fbo.gov) to obtain amendments and the most current information regarding this solicitation.

c. Proposals shall include separate files/binders for each volume. Technical parts A & B may be submitted as a single volume. The Offeror shall confine submissions to essential matters sufficient to define the proposal and provide adequate basis for evaluation. All pages of each volume shall be appropriately numbered and identified by the complete company name, date and RFP number in the header and/or footer. Should there be a discrepancy between the hard copy and electronic information provided, the hard copies shall take precedence.

i. Electronic copy proposals: Electronic proposals shall be submitted via compact disc (CD).

Digital files shall be compatible with Microsoft Office 2013 and submitted on a CD-ROM in uncompressed files. Offerors are permitted to submit proposals on a single CD; however, all file names shall include the respective company name, document name, and volume number (using abbreviations as necessary). Proposals shall include separate electronic files for each volume.

ii. Hard copy proposals (Volumes II & III only): Offerors shall submit twelve (12) hard copies of Volume II - Technical & Volume III – Past Performance in accordance with the instructions of this section. Proposal volumes shall be submitted in separate binders, tabbed appropriately, and must include a cover page with the name of the Prime offeror, address, CAGE code, phone number(s), email address(es), solicitation number, and point of contact. Each binder shall be clearly labeled with its title and a copy number (e.g., copy 1 of 12). Proposals shall be in sealed envelopes/boxes clearly marked with the solicitation number.

d. It is the Contractor’s responsibility to ensure the Government receives both electronic and hard copy proposal submissions on time. A complete proposal received after the exact date and time set for receipt of proposals will be considered late and will not be considered for award. With regard to hard copy proposal submission, there must be acceptable evidence to establish that the proposal was received at the Government installation designated for receipt of offers and was under the Government’s control prior to the time set for receipt of offers.

e. Page Limitation: If the page limits are exceeded, the pages in excess of the limit will be removed and not evaluated. The following are excluded from the page limitations: Covers for volumes, tables of contents, glossary of abbreviations and acronyms, indices, title pages, cross reference indexes, and section dividers if they are inserted solely to provide ease to the reader in locating parts/sections of the proposal. Section dividers will be counted if they contain any other material information required for the evaluation of the proposal. Additionally, pages marked “This page intentionally left blank” will not be counted. Page limitations are as follows:

TITLE PAGE LIMIT FORMAT

Vol I: General Documents

N/A MS Word (compatible with MS Word 2007) or Adobe PDF (compatible with Adobe Reader XI)

Vol II: Technical – Part A

100 pages

Vol II: Technical – Part B Vol III: Past Performance

25 pages

Vol IV: Price N/A MS Excel compatible with MS Excel 2013 or Priced CLIN on SF 1449. Prices shall be in Dollars.

Narratives may be provided in Adobe PDF (compatible with Adobe Reader XI)

f. Offers, modifications, revisions, or withdrawals of Offers received after the date established in this

RFP for receipt of proposals will be handled in accordance with FAR Clause 52.215-1.

g. Proposal font type shall be limited to Arial, Courier or Times New Roman equal to or larger than 11 point font size. Graphics, photos, and charts may use color; however, offerors are cautioned to use colors that are legible if printed in black and white. Tables and illustrations may use a reduced font no less than 10-point and may be landscape. 11X17 fold-out tables may be used for tables/graphic representations only and will be counted as one page per fold-out.

h. Margins shall be at least 1 inch on the top and bottom and 3/4 inch on the side. The Contractor shall number each page in order to eliminate any confusion. In the event an offeror creates an ambiguity in their page numbering, the Government may exercise its own discretion in counting pages.

i. Microsoft Excel files submitted shall be unlocked, formula driven, and numbers shall not be hard coded, where applicable. Spreadsheets shall be in Microsoft Excel 2013 compatible format (.XLS format).

j. Submission of the documentation specified below will constitute the offeror’s acceptance of the terms and conditions of the RFP, concurrence with the performance work statement and contract type.

k. It is the Government’s intention to award without discussions. Offerors are encouraged to present their best technical proposal and prices in their initial proposal submission. However, should discussions become necessary, the Government reserves this right. If this occurs, a competitive range may be determined and offerors will be notified.

l. If an offeror believes that the requirements in these instructions contain an error, ambiguity, omission, or are otherwise deemed unsound, the offeror shall immediately notify the Contracting Officer and Contract Specialist in writing by email with supporting rationale.

m. The proposal shall be valid for 180 days from the required submission date.

n. Updates related to this RFP, to include the RFP, amendments, notices, and other information will be made available on the Federal Business Opportunities (FBO) website at https://www.fbo.gov/. It is the responsibility of the offerors to access FBO to obtain amendments and the most current information regarding this solicitation. Offerors are deemed to have knowledge of all documents that are posted to

FBO.

o. The submission shall be clearly indexed and logically assembled. All proposals shall be Unclassified and proprietary information shall be clearly marked. Failure to comply with all requirements of the proposal submission instructions may eliminate an offer from consideration.

p. Offeror must be registered in the System for Award Management (SAM) and have a Commercial and

Government Entity (CAGE) Code.

L.2 PROPOSAL PREPARATION INSTRUCTIONS

L.2.1 Offeror’s proposal shall consist of four separate Volumes as follows:

Volume I: General Documents Solicitation/Amendments/Clause Fill-Ins Joint Venture/Teaming/Partnership Info (if applicable) Volume II: Technical Factor – Limit 100 pages

Part A:

Subfactor 1: Experience Subfactor 2: Facility Clearance

Part B:

Subfactor 1: Execution Plan

Subfactor 2: Staffing Plan Subfactor 3: Risk Mitigation Plan Volume III: Past Performance Factor – Limit 25 pages Volume IV: Price Factor

L.2.2 All information pertaining to a particular volume shall be confined to that volume. For example, no Cost/Price information shall be included in any volume other than the Cost/Price Proposal volume. Additionally, Volume II – Technical, Part A – Subfactor 1 - Experience shall be submitted separately from Past Performance, though some of the same information may be submitted in both volumes, as outlined below. The offeror shall confine submissions to essential matters, sufficient to define the proposal in a concise manner and permit a complete and accurate evaluation of each proposal. Note: Technical data submitted in Volume II will be considered in the evaluation of the Technical Factor, and may also be considered in the price realism analysis.

L.2.3 Offerors are cautioned that “parroting” of the technical requirements or the PWS with a statement of intent to perform does not reflect an understanding of the requirement or capability to perform. Offerors are responsible for including sufficient details to permit a complete and accurate evaluation of each proposal.

L.3 CONTENT REQUIREMENT

L.3.1 VOLUME I – GENERAL DOCUMENTS:

L.3.1.1 Standard Form 33 (SF 33), Solicitation, Offer, and Award – An authorized official of the firm shall sign the SF 33 and all amendments and certifications requiring original signature. Amendments must either be acknowledged on the SF 33 or individually signed and provided with the proposal. The executed SF 33 is not evaluated for source selection purposes but is required to help determine contractor responsibility. An Acrobat PDF file shall be created to capture the signatures for submission. Failure to provide the SF33 could result in the rejection of the offeror’s proposal.

L.3.1.2 Partnerships / Teaming Arrangements. If applicable, offerors participating in partnerships / teaming arrangements for this requirement shall submit their partnership / teaming agreements with their proposal. All partnership / teaming agreements shall include the following information:

o Provide a complete list of the corporate names (no abbreviations) of all partners / team members, addresses, points of contact, phone numbers, DUNS numbers, and CAGE Codes.

o Submit a copy of the partnership / teaming agreement that demonstrates the relationship between firms and identifies the contractual authority to bind the firms. This agreement needs to be signed by the appropriate individuals of each firm.

L.3.1.3 Subcontractor Letter(s) of Commitment: If applicable, offerors shall provide Letters of Commitment for all proposed major subcontractors, as defined in L.3.1.4.

L.3.1.4 Subcontracting Matrix – If the Offeror is utilizing subcontractors, it shall provide Attachment 0003 – Subcontracting Matrix to identify all of its subcontractors, CAGE codes, the tasks they will be performing, and estimated dollar value of the work to be performed. This information will be used in the evaluation of all factors. A major subcontractor is defined as a subcontractor who is expected to perform PWS tasks requiring Top Secret clearance and/or at least 10% of the total proposed cost/price.

L.3.2 VOLUME II: TECHNICAL

L.3.2.1 Technical - Part A

L.3.2.1.1 SUBFACTOR 1: EXPERIENCE:

a. This factor considers the offeror’s recent and relevant specialized experience providing simulation and mission command training support services with at least two (2) years of experience providing the same or similar support as required by the PWS.

b. Recency and relevancy are defined in paragraph M.3.1.1.3.

c. The offeror shall provide the following details of all recent and relevant contract experience: (1) Company

Name, (2) Point of Contact, (3) Contract/Subcontract Number, (4) Company Address, (5) Contract Start & Completion Dates, (6) Place of Performance, (7) Total Value of Contract (or total estimated value if contract is incomplete, (8) Description of Contract/ Contract Type, (9) Brief description of services (10) Customer POCs.

Offerors may provide copies of Part I of the Past Performance Questionnaire for this subfactor if they choose.

The offeror shall also include a narrative explanation clearly detailing how the previous contracts are relevant to the requirements of this solicitation. (Note: Copies of the contract details and contract narrative should also be provided under Volume III – Past Performance.) The Government is not bound by the offeror’s claim of relevancy. The Government reserves the right to determine whether a service is the same or similar.

L.3.2.1.2 SUBFACTOR 2: FACILITY CLEARANCE:

a. The Offeror must possess a current Top Secret Facility Clearance by the Defense Security Service (DSS) at the time of proposal submission. This is required in order for the Offeror to request and sponsor an individual employee’s Security Clearance to perform the functions identified in the PWS. All subcontractors must possess either a Top Secret Facility Clearance or Secret Facility Clearance at the time or proposal submission, depending on the tasks the subcontractor will be performing. The offeror shall provide objective evidence showing the current facility clearance level for the Prime Offeror and all proposed subcontractors.

b. Attachment 0003 – Subcontracting Matrix will be used to verify the clearance level required for each proposed subcontractor. The Government will verify the Offeror and its proposed subcontractor(s) possess the required Facility Clearance levels via the Defense Security Services (DSS) Industrial Security Facilities Database

(ISFD).

L.3.2.2 Technical - Part B

L.3.2.2.1 SUBFACTOR 1: EXECUTION PLAN. The Offeror shall submit a detailed execution plan showing its understanding of and approach to performing the requirements of the solicitation, which specifically addresses the following elements:

a. Transition during Phase In and Phase Out.

i. Phase In –

1) The offeror shall detail its processes and outline a realistic and feasible timeline for onboarding a new workforce during the Phase-In period to assure readiness prior to full performance under the contract. These processes shall include how the offeror will finalize any draft plans and staffing issues, obtain Common Access Cards (CAC) and installation access, obtain necessary licenses, conduct a joint inventory of government provided equipment, safeguard Privacy Act information, and fully man and provision all offices and locations.

2) The offeror shall demonstrate the ability to fill the proposed positions under the Status of Forces Agreement (SOFA) with Germany, the Shell Agreement with Italy through the DoD Contractor Personnel Office (DOCPER) and/or utilizing European business rules in the case of Ordinarily Resident (OR) employees. The offeror shall demonstrate a clear knowledge of all necessary documentation and timelines needed for Technical Expert (TE), Analytical Support (AS), and Technical Representative (TR) status accreditation applications as it applies to the offeror’s management approach and cost proposal, and in meeting the requirements of the PWS.

ii. Phase Out – The offeror shall detail its processes and timelines for continuing full performance while providing a successful and cooperative transition for the follow-on contract as required by the PWS. The Offeror shall detail its plan for executing a realistic and feasible time-phased approach to transitioning-out all of the PWS requirements.

b. The offeror shall provide detailed plans for the execution of day to day tasks at JMSC hub and spoke sites as well as JMRC. The offeror shall provide a detailed plan identifying the contractor management approach that demonstrates flexibility and agility while implementing cost effective enhancements and responding to unanticipated changes. The offeror shall describe their ability to manage, track, and report on the following elements: progress, contract funds status, personnel manning and training, contractor operation and management status, and status of assigned government equipment. The offeror shall also describe their approach for managing multiple tasks or exercises at different locations.

c. The offeror shall provide detailed plans for the execution of exercise schedules to include coverage of JELC events and surge periods within the fixed price workload data. The offeror shall explain how this support will be provided within its proposed overall staffing levels and shall provide a crosswalk showing its approach to its staffing plan and their understanding of exercise/event schedules.

d. The offeror shall detail its approach to MSEL management, scripting, and scenario development to include

JMRC OPFOR and intelligence scripting. The offeror shall explain how it will support these dynamic tasks and provide appropriate quality control of products.

e. The offeror shall provide detailed plans regarding its approach to logistics management and property management. The offeror shall explain how this support will be provided within its proposed overall staffing levels and shall provide a crosswalk showing its approach to its staffing plan and their understanding of exercise/event schedules.

f. The offeror shall provide detailed plans regarding its approach Observer Controller Trainer support. The offeror shall include their plan to maintain workforce currency in doctrine, tactics, techniques and procedures.

g. The offeror shall provide detailed plans regarding its approach to Gaming support. The offeror shall explain how this support will be provided within its proposed overall staffing levels and shall provide a crosswalk showing its approach to its staffing plan and its understanding of exercise/event schedules.

h. The offeror shall detail its approach to managing Part Time on Call personnel. The offeror shall include their plan for maintaining an appropriate pool of personnel and how they will ensure their currency.

L.3.2.2.2 SUBFACTOR 2: STAFFING PLAN. The offeror shall submit a detailed personnel staffing plan addressing the items below. Additionally, the Offeror’s Staffing Plan shall directly correspond to the cost/price volume.

a. Offerors proposed approach to recruit and retain employees throughout the life of the contract effort along with

Offeror’s crosswalk to proposed compensation plan. The offeror shall also address how they will keep employees trained in emerging concepts and technologies to make certain that all support provided to the Government is up-to-date and valid to fully meet the requirements of the RFP.

b. Organizational and Management Structure showing the clear and logical lines of authority and communications among the various sites.

c. Staffing plan identifying all positions required to meet the tasks listed in the PWS. This documentation shall include labor categories/types along with proposed hours, proposed position descriptions, levels of expertise, experience levels, clearances associated with the position, and location of the personnel.

d. Qualifications of the Program Manager and other proposed key personnel.

L.3.2.2.3 SUBFACTOR 3: RISK MITIGATION PLAN. The offeror shall provide a comprehensive Risk Mitigation Plan that identifies and mitigates risks associated with their proposed strategies as well as risks associated with contract performance.

L.3.3 VOLUME III: PAST PERFORMANCE

L.3.3.1 The Government will evaluate the Offeror’s recent and relevant past performance information to assess overall performance risk and the offeror’s likelihood of success in meeting the requirements of the PWS. The Offeror may submit recent and relevant past performance for itself, its teaming partners, and proposed major subcontractor(s) (as defined in paragraph L.3.1.4). All information submitted under Volume II – Technical, Part A, Subfactor 1 – Experience should also be submitted in the Past Performance Volume. Note that the Government may review other sources of past performance information besides the PPQ. The Government reserves the right to determine whether a service is the same or similar.

L.3.3.2 Past Performance Questionnaire(s).

a. The Offeror shall submit no more than five (5) recent and relevant contract references. Recent and Relevant are defined in Section M, paragraphs M.3.2.2.9(a-b). For each reference provided, the Offeror shall complete and submit Part I of Attachment 0004: Past Performance Questionnaire. If an offeror submits more than five (5) references, only the first five as listed sequentially in Volume III will be considered in the past performance evaluation.

b. For each reference provided, the Offeror shall email a blank copy of Attachment 0004: Past Performance

Questionnaire (PPQ) to its customer or appropriate Government or Prime contractor representative, requesting they complete the PPQ in its entirety. Completed questionnaires shall be emailed to both Mr.

Aaron Schulz (aaron.m.schulz.civ@mail.mil) and Ms. Jana Bunch (jana.j.bunch.civ@mail.mil). PPQs must be received by the closing date and time of this RFP. Questionnaires received after the proposal due date may not be considered.

c. Completed PPQs are not to be reviewed by the Offeror. Once the questionnaire is completed, it is considered For Official Use Only. The names of the individuals who complete the questionnaires will not be disclosed to the Offeror. Note that Past Performance Questionnaires returned directly to the contracting office will not be subject to page limits per the proposal instructions of this section.

L.3.3.3 Contract Narrative. For each reference provided, the offeror may provide a specific narrative explanation describing the objectives achieved and detailing how the effort is relevant to the requirement of this RFP. The offeror shall also either provide a copy of any Cure Notices or Show Cause Letters received on each contract listed, or state that there were none. If copies are provided, the offeror shall also provide a description of any corrective action implemented by the offeror or proposed subcontractor. The offerors shall indicate if any of the contracts listed were terminated, in whole or in part, and the type and reasons for the termination. If none of the contract references were terminated, the contractor shall state such.

L.3.3.4 Subcontracts. The offeror shall provide an outline of how the effort required by the RFP will be assigned for performance within the offeror’s corporate entity, and, if applicable, among the proposed subcontractor(s). The information provided for the prime offeror and each proposed major subcontractor must include the entire company name, company address, CAGE Code, DUNS Number and type of work to be performed by citing the applicable Government PWS subparagraph number. This includes all subcontractors who will be providing services which require Top Secret Facility Clearance or whose subcontract is for more than 10% of the total proposed cost/price (less FAR 52.217-8 Option to Extend Services calculation). This will be verified by comparing the Subcontracting Matrix to the Subtotal (Cell I43) of the Cost-Price Matrix to determine the percent of work a subcontractor is performing, and/or comparing the tasks identified in the Subcontracting Matrix to the DD254. This section will further include written consent of major subcontractors to allow the disclosure of their past performance information to the Offeror. In addition, Letters of Commitment shall be included for all major subcontractors.

L.3.4 VOLUME IV – COST/PRICE

L.3.4.1 The offeror shall submit a cost/price proposal that will be evaluated for completeness, reasonableness, realism, and balance. Cost/Price proposals shall be sufficiently detailed to demonstrate and support the offeror’s clear understanding of the technical requirements. The burden of proof for the credibility of all proposed prices and compensation plan rests with the Offeror. All offers shall be in U.S. DOLLARS. The cost/price proposal shall consist of the following:

a. FPAF CLINs: The Offeror shall provide its proposed price for all FPAF CLINs in Microsoft Excel detailing its fixed prices and summarizing using Attachment 0005 - Cost/Price Matrix for the base year and option years. Attachment 0005 will be used to calculate the total evaluated price. The prices shall include all personnel; management; transportation inside of the hub, spoke, and JMSC/JMRC; travel to include logistics support movement of equipment; and other services necessary to perform the requirements outlined in the PWS. Additionally, any overtime is to be included in the proposed fixed price CLINS. The details shall include the the number of hours per labor category and per location, the compensation for each labor category for each location, the number of trips (per location and number and type of personnel per trip) traveling inside the hub, spoke and JMSC/JMRC, the details for travel to include logistics support movement of equipment, and the details for any additional services necessary to perform the requirements outlined in the PWS. The FPAF CLINs shall also include any materials or equipment not provided by the Government which are necessary to perform the requirements of the PWS. The details provided shall track to the technical proposal Staffing Plan and to the Compensation Plan provided. The Government has set the award fee at a maximum of 5%. The total price for the FPAF CLINs will be calculated by the Government by adding 5% to the proposed fixed price.

b. Cost Reimbursable (Non-Fee Bearing) CLINs (Travel): A surrogate number has been provided for the Cost Reimbursable Travel CLINs to be used for evaluation purposes only. The Government provided surrogate numbers can be found in Attachment 0005 - Cost/Price Matrix.

c. Cost Reimbursable (Non-Fee Bearing) CLINs (PTOC): Offerors shall use the estimated quantities provided at Attachment 0005, Tab 2 - PTOC Hours to determine the total estimated value for proposal purposes. The Offeror shall provide a detailed cost element breakdown containing other than certified cost or pricing data prepared IAW FAR 15.403-3, and 15.408 Table 15-2 with the exception of the certification found at Table 15-2(I)(A)(9). The Government requests that the breakdown include the Offeror and its subcontractors’ labor rate build-ups to include base rate and indirect rates utilized to develop the proposed loaded labor rates. The electronic spreadsheets must contain all working formulas, algorithms and calculate the proposed costs. This data shall clearly explain how the Offeror arrived at the proposed rate for each labor category.

Additional details may be requested as necessary to support the proposed costs. Each individual CLIN's total value shall be populated in Attachment 0005 - Cost/Price Matrix for the base year and option years.

d. The Offeror shall complete Attachment 0005 – Cost/Price Matrix for the base and all option years by populating the highlighted blue cells. All un-highlighted cells are formula driven. All highlighted cells need to be populated. For areas that the Offeror intends to propose no cost, Offerors shall populate those cells with a zero (0).

e. The Offeror shall fully support the Cost/Price Matrix by providing a narrative on the cost and pricing assumptions, as well as additional sufficient cost and price detail that supports the proposed costs/prices as they relate to the proposed technical approach. Cost/price detail shall include all personnel and management structure and compensation (see paragraph f), transportation inside of the hub, spoke, and JMSC/JMRC; travel to include logistics support movement of equipment; and other services necessary to perform the requirements outlined in the PWS.

f. Compensation Plan for Professional Employees. Offerors shall provide a total compensation plan in accordance with FAR 52.222-46, Evaluation of Compensation for Professional Employees, setting forth salaries and fringe benefits (i.e. DoDDS schools) proposed for the professional employees who will work under the contract. The offeror shall advise if different compensation plans are used for various skill levels and shall describe these differences. The offeror shall summarize any supporting data, such as recognized national and regional compensations surveys and studies of professional, public, and private organizations used in establishing the total compensation structure.

g. The supporting price information showing the clear audit trail from the technical approach to the associated

CLINs shall be submitted in spreadsheet format in MS Excel. MICROSOFT EXCEL FILES SHALL

REMAIN UNLOCKED AND NUMBERS SHALL NOT BE HARD CODED.

h. The Offeror shall also provide the most current compliance status and date of adequacy/inadequacy determination for the following systems; Accounting System, Estimating System and Purchasing System.

If the Offeror does not have an approved Accounting System, a Pre-Award Survey may be required. The Offeror shall provide any known/cited accounting system deficiencies. The Contracting Officer will request an accounting system audit or follow up audit from DCAA. The Offeror shall also identify any deviations from the Offeror's standard procedures in preparing this proposal. If the Offeror proposes to absorb a portion of costs, explain the reason and impact on cost and the specific accounting treatment that will be given to those absorbed costs. The Offeror shall provide the same information for any subcontractor with which they intend to establish a cost or T&M type subcontract arrangement.

L.3.4.2 If a proposed subcontractor chooses to provides it cost/price information independently to the Government, it shall submit its cost/price proposal IAW the submission instructions outlined in paragraph L.1.2 above. The subcontractor shall clearly identify in its proposal the prime offeror associated with its proposal submission.

a. The Offeror also must ensure that its proposed subcontractor(s) submit their information by the proposal due date and time and all the proposed values that pull forward to the Offeror's proposal are consistent with the subcontractor(s) overall proposed price, along with identifying supporting data and explanations. The Offeror is responsible for ensuring that the proposals of these other entities conform to the same criteria, including supporting data and explanations.

(End of Summary of Changes)