EXHIBITA43BPGUCDRL.pdf

CONTRACT DATA REQUIREMENTS LIST

(Mechanized Version)

CATEGORY: MISC SYSTEM/ITEM: CTG 105MM TP PGU-43/B

TO CONTRACT/PR: WH2A0B071A

A001

Title: MANAGEMENT PLAN App Code: A

Subtitle: STAT. PROCESS CNTRL PLAN Dist Statement Required: N/A

Data Item Number: DI-MGMT-80004A Frequency: ASREQ

Contract Reference: SECTION E As of Date: N/A

Requiring Office: AMSJM-QAP Date of 1st Submission: ASREQ

DD 250: XX Date of Subsequent Submission: WHEN REVISED

Distribution Draft Reg Repro

THRU QAR 0 0 0

AMSJM-QAP 0 1 0

REMARKS

GENERAL/DETAIL SECTIONS SHALL BE SUBMITTED AT LEAST 60 DAYS PRIOR TO PRODUCTION OR FIRST ARTICLE (IF FA REQUIRED).IF GENERAL SECTION WAS PREVIOUSLY ACCEPTED, SUBMIT UPDATED/REVISED MILESTONES IN TIMEFRAMES STATED ABOVE. THE GOV'T REQUIRES 30 DAYS TO REVIEW THE PLAN AFTER RECEIPT.

DISPOSITION OF THE GENERAL SECTION, DETAILED SECTION, AND THE CONTRACTOR'S MILESTONES FOR IMPLEMENTATION SHALL BE PROVIDED BY AMSJM-QAP THRU THE CO. **ONLY PARA 10.3.2.M APPLIES. CHANGE OTHER TO STATISTICAL PROCESS CONTROL. NOTE - SUBMIT IN RICH TEXT FORMAT, MICROSOFT WORD, OR BY EMAIL TO JACOB.R.THOMS.CIV@MAIL.MIL. THE ACCEPTABLE SOFTWARE PACKAGES WILL BE MICROSOFT OFFICE.

IF THESE ARE NOT AVAILABLE, A WORD PROCESSING KIND OF DOCUMENT SAVED IN TEXT FORMAT IS

ACCEPTABLE.

A002

Title: MANAGEMENT PLAN App Code: A

Subtitle: QUALITY SYSTEM PLAN Dist Statement Required: N/A

Data Item Number: DI-MGMT-80004A Frequency: ASREQ

Contract Reference: SECTION E As of Date: N/A

Requiring Office: AMSJM-QAP Date of 1st Submission: ASREQ

DD 250: XX Date of Subsequent Submission: WHEN REVISED

Distribution Draft Reg Repro

AMSJM-QAP 0 1 0

QAR 0 1 0

REMARKS

PLAN SHALL BE SUBMITTED PRIOR TO SUBMISSION OF FIRST ARTICLE (FA) (IF FA REQUIRED) OR PRIOR TO INITIATION OF PRODUCTION. ALLOW 30 DAYS FOR GOV'T REVIEW. ONLY 3.2.E APPLIES WHERE OTHER EQUALS QUALITY SYSTEM PLAN. DATA SHALL BE SUBMITTED ELECTRONICALLY TO JACOB.R.THOMS.CIV@MAIL.MIL.

A003

Subtitle:

CRITICAL

CHARACTERISTICS

CONTROL (CCC) PLAN

Dist Statement Required: N/A

Data Item Number: DI-MGMT-80004A Frequency: ASREQ

Contract Reference: Contract Section E Clause As of Date: N/A

Requiring Office: AMSJM-QAP Date of 1st Submission: ASREQ

DD 250: XX Date of Subsequent Submission: ASREQ

Distribution Draft Reg Repro

THROUGH QAR 0 1 0

AMSJM-QAP 0 1 0

REMARKS

DELETE PARAGRAPHS 3.6 AND 3.7. CONTRACTOR'S ELECTRONIC FORMAT USING MICROSOFT WORD OR COMPARABLE SOFTWARE IS ACCEPTABLE. ADDITIONAL GUIDANCE ON CONTENT OF THE CCC PLAN IS AVAILABLE AT HTTPS://QA.PICA.ARMY.MIL/QAW/QAW_P/SAFETY_POLICY.HTM. CONTRACTOR SHALL SUBMIT PLAN COVERING ALL CRITICAL CHARACTERISTICS AS REQUIRED IN CONTRACT CLAUSE REFERENCE. CONTRACTOR SHALL SUBMIT 60 DAYS PRIOR TO FIRST ARTICLE OR PRODUCTION IF FA IS NOT APPLICABLE. GOVERNMENT WILL RESPOND WITHIN 45 DAYS OF RECEIPT OF ORIGINAL AND ANY REQUIRED REVISIONS. UNLESS OTHERWISE SPECIFIED, CONTRACTOR SHALL SUBMIT REVISIONS WITHIN 10 DAYS OF RECEIPT OF GOVERNMENT RESPONSE. DATA

SHALL BE SUBMITTED ELECTRONICALLY TO JACOB.R.THOMS.CIV@MAIL.MIL.

A004

Subtitle: CRITICAL PLAN OF ACTION (CPOA) Dist Statement Required: N/A

Data Item Number: DI-MGMT-80004A Frequency: ASREQ

Contract Reference: Contract Section E Clause As of Date: N/A

Requiring Office: AMSJM-QAP Date of 1st Submission: ASREQ

DD 250: XX Date of Subsequent Submission: ASREQ

Distribution Draft Reg Repro

THROUGH QAR 0 1 0

AMSJM-QAP 0 1 0

REMARKS

DELETE PARAGRAPHS 3.6 AND 3.7. CONTRACTOR'S ELECTRONIC FORMAT USING MICROSOFT WORD OR COMPARABLE SOFTWARE IS ACCEPTABLE. ADDITIONAL GUIDANCE ON CONTENT OF THE CPOA IS AVAILABLE AT HTTPS://QA.PICA.ARMY.MIL/QAW/QAW_P/SAFETY_POLICY.HTM. CONTRACTOR MAY VOLUNTARILY SUBMIT A CPOA FOR ALL CRITICAL CHARACTERISTICS AS SPECIFIED IN THE CONTRACT CLAUSE REFERENCE. CONTRACTOR SHALL SUBMIT THE CPOA FOR APPROVAL PRIOR TO USE. GOVERNMENT WILL RESPOND WITHIN 45 DAYS OR RECEIPT OF ORIGINAL AND ANY REQUIRED REVISIONS. UNLESS OTHERWISE SPECIFIED, CONTRACTOR SHALL SUBMIT REVISIONS WITHIN 10 DAYS OF RECEIPT OF GOVERNMENT RESPONSE. UNLESS OTHERWISE APPROVED BY THE PCO, THE CPOA IS NOT AUTHORIZED FOR USE PRIOR TO GOVERNMENT APPROVAL. SUBMIT

ELECTRONICALLY TO JACOB.R.THOMS.CIV@MAIL.MIL.

A005

Title: AMMUNITION DATA CARD (ADC) App Code: N/A

Subtitle: Data Input Dist Statement Required: N/A

Data Item Number: DI-MISC-80043B Frequency: ASREQ

Contract Reference: SECTION C, MIL-STD- 1168B As of Date: N/A

Requiring Office: AMSJM-QAP Date of 1st Submission: ASREQ

DD 250: NO Date of Subsequent Submission: WHEN REVISED

Distribution Draft Reg Repro

WARP 0 1 0

REMARKS

ADCS SHALL BE PREPARED IAW MIL-STD-1168B, SEC C SOW AND THIS CDRL BY ACCESSING THE WORLDWIDE AMMUNITION DATA REPOSITORY PROGRAM (WARP) which is located on the Munitions History Program (MHP) website at https://mhp.redstone.army.mil/ *HARD COPY ADCS PROVIDED WITH LOT SHIPMENTS SHALL BE GENERATED FROM THE WARP PROGRAM AND SIGNED AND DATED BY THE GOVERNMENT AGENCY RESPONSIBLE FOR ACCEPTANCE (GARA). **WHEN BALLISTIC TESTS ARE REQUIRED, ONE HARD COPY GENERATED FROM THE WARP PROGRAM, SIGNED AND DATED BY THE GARA SHALL BE SENT TO THE PROVING GROUND WITH SAMPLE SHIPMENT, PLUS AN ADDITIONAL SIGNED, HARD COPY PROVIDED TO THE PROVING GROUND BY MAIL. SUBMIT

VIA THE INTERNET OR MAIL A CD ROM.

A006

Title: ENGINEERING CHANGE PROPOSAL (ECP) App Code: N/A

Subtitle: Dist Statement Required: **

Data Item Number: DI-CMAN-80639C* Frequency: ASREQ

Contract Reference: SECTION C As of Date: N/A

Requiring Office: RDAR-EIS-PD Date of 1st Submission: ASREQ

DD 250: LT Date of Subsequent Submission: ASREQ

Distribution Draft Reg Repro

SEE ADDRESS CODE 0 0 0

DISTRIBUTION 0 0 0

ATTACHED*** 0 0 0

REMARKS

*DELETE PARAGRAPH 2 OF DID. SEE ATTACHED DATA DELIVERY DESCRIPTION FOR CONTENT OF THE ECP.

CONTRACTOR FORMAT IS ACCEPTABLE. DATA MUST BE IN GOV'T COMPATIBLE SOFTWARE (I.E., MICROSOFT OFFICE). **DIST STATEMENT WILL BE ASSIGNED AND IMPLEMENTED BY THE DOD CONFIGURATION MGR.

***SUBMIT ELECTRONICALLY TO USARMY.RIA.ARDEC.MBX.ARDEC-ECP-INPUT@MAIL.MIL. ELECTRONIC FILES MUST BE LESS THAN 7MB. THE FORMS LOCATED AT HTTPS://WWW.PICA.ARMY.MIL/PROD_TECHDATA/CMDOCS-

LINKS.HTM ARE THE PREFERRED METHOD OF SUBMISSION FOR THIS DATA ITEM.(DD FORMS)

A007

Title: REQUEST FOR DEVIATION (RFD)**** App Code: N/A

Subtitle: Dist Statement Required: **

Data Item Number: DI-CMAN-80640C* Frequency: ASREQ

Contract Reference: SECTION C As of Date: N/A

Requiring Office: RDAR-EIS-PD Date of 1st Submission: ASREQ

DD 250: LT Date of Subsequent Submission: ASREQ

Distribution Draft Reg Repro

SEE ADDRESS CODE 0 0 0

DISTRIBUTION 0 0 0

ATTACHED*** 0 0 0

REMARKS

*DELETE PARAGRAPH 2 OF DID. SEE ATTACHED DATA DELIVERY DESCRIPTION FOR CONTENT OF RFD. ADEQUATE DATA/ANALYSIS/TESTING TO SUPPORT THE POSITION RELATIVE TO PARAGRAPH 24 AND 25 OF DATA DELIVERY DESCRIPTION SHALL BE INCLUDED. CONTRACTOR FORMAT IS ACCEPTABLE, BUT DATA MUST BE IN GOV'T COMPATIBLE SOFTWARE (I.E., MICROSOFT OFFICE). **DISTRIBUTION STATEMENT WILL BE ASSIGNED AND IMPLEMENTED BY THE DOD CONFIG MGR. ***SUBMIT ELECTRONICALLY TO USARMY.RIA.ARDEC.MBX.ARDEC-ECP-

INPUT@MAIL.MIL. ELECTRONIC FILES MUST BE LESS THAN 7MB. THE FORMS LOCATED AT

HTTPS://WWW.PICA.ARMY.MIL/PROD_TECHDATA/CMDOCS-LINKS.HTM ARE THE PREFFERED METHOD OF SUBMISSION FOR THIS DATA ITEM. (DD FORMS) ****THE CONTRACTOR SHALL IDENTIFY IF THE RFD IS PRIOR TO MFG OR NON-CONFORMING MTRL. A PRIOR TO MFG DESCRIBES A PROPOSED DEPARTURE FROM CONFIG DOCS FOR A SPECIFIC NUMBER OF UNITS OR FOR A SPECIFIED PERIOD OF TIME. A NON-CONFORMING MTRL RFD IS USED TO OBTAIN AUTH TO DELIVER NON-CONFORMING MTRL WHICH DOES NOT MEET THE CONFIG DOCS BUT

IS SUITABLE FOR USE AS IS OR AFTER REPAIR.

A008

Title: NOTICE OF REVISION (NOR) App Code: N/A

Subtitle: Dist Statement Required: ***

Data Item Number: DI-CMAN-80642C* Frequency: ASREQ

Contract Reference: SECTION C As of Date: N/A

Requiring Office: RDAR-EIS-PD Date of 1st Submission: ASREQ

DD 250: LT Date of Subsequent Submission: ASREQ

Distribution Draft Reg Repro

SEE ADDRESS CODE 0 0 0

DISTRIBUTION 0 0 0

REMARKS

*DELETE PARAGRAPH 2 OF DID. SEE ATTACHED DATA DELIVERY DESCRIPTION FOR CONTENT OF NOR.

CONTRACTOR FORMAT IS ACCEPTABLE. DATA MUST BE IN GOV'T COMPATIBLE SOFTWARE (I.E., MICROSOFT OFFICE). **SUBMIT ELECTRONICALLY TO USARMY.RIA.ARDEC.MBX.ARDEC-ECP-INPUT@MAIL.MIL. ELECTRONIC FILES MUST BE LESS THAN 7MB. FORMS LOCATED AT HTTPS://WWW.PICA.ARMY.MIL/PROD_TECHDATA/CMDOCS- LINKS.HTM ARE THE PREFERRED METHOD OF SUBMISSION FOR THIS DATA ITEM. ***THE DISTRIBUTION

STATEMENT WILL BE ASSIGNED AND IMPLEMENTED BY THE DOD CONFIGURATION MANAGER.

A009

Title: TEST/INSPECTION REPORT App Code: A

Subtitle: FIRST ARTICLE TEST REPORT Dist Statement Required: N/A

Data Item Number: DI-NDTI-80809B Frequency: ASREQ

Contract Reference: SECTION E As of Date: N/A

DD 250: LT Date of Subsequent Submission: N/A

Distribution Draft Reg Repro

THROUGH QAR 0 1 0

AMSJM-QAP 0 1 0

REMARKS

FOR SUBMISSION OF FIRST ARTICLE TEST REPORTS, SEE CONTRACT CLAUSES PERTAINING TO FIRST ARTICLES FOR INSTRUCTIONS REGARDING SUBMISSION AND DISPOSITION OF FIRST ARTICLES. THE QAR WILL PROVIDE DISPOSITION OF PRODUCTION ACCEPTANCE TEST REPORTS. SUBMIT VIA THE INTERNET OR MAIL A CD ROM (PC

FORMAT). SUBMIT ELECTRONICALLY TO JACOB.R.THOMS.CIV@MAIL.MIL.

A010

Title: TEST/INSPECTION REPORT App Code: N/A

Subtitle: ACCEPTANCE & DESCRIPTION* Dist Statement Required: N/A

Data Item Number: DI-NDTI-80809B Frequency: ASREQ

Contract Reference: SECTION E As of Date: N/A

Requiring Office: AMSJM-QAP Date of 1st Submission: ASREQ

DD 250: NO Date of Subsequent Submission: ASREQ

Distribution Draft Reg Repro

THRU QAR 0 0 0

REMARKS

*SHEETS FOR PROPELLANTS AND EXPLOSIVES. THIS REPORT SHALL BE SUBMITTED FOR EACH LOT OR BATCH PROCESSED. ONLY PARA 10.2.6.4, 10.2.6.4.1 AND 10.2.6.4.2 OF THE DID APPLY. ELECTRONIC SUBMISSION MADE BY ACCESSING THE WORLDWIDE AMMUNITION DATA CARD REPOSITORY PROGRAM (WARP) HOUSING THE ACCEPTANCE AND DESCRIPTION SHEET MODULES which are located on the Munitions History Program (MHP) website at https://mhp.redstone.army.mil. THIS REQUIREMENT IS IN ADDITION TO THE DISTRIBUTION ACCOMPANYING THE LOTS, THOSE REQUESTED THE QUALITY AND TECHNICAL OFFICES IN THE ITEM SPECIFICATIONS, AND ANY OTHER DISTRIBUTIONS REQUIRED IN THE CONTRACT. M1 Propellant: MIL-P-60318

BLACK PWDR CL 1: MIL-P-223

Primer Mix#70: 9282793

Pellet Booster: 9255168

A011

Title: TEST INSPECTION REPORT App Code: N/A

Subtitle: LOT ACCEPTANCE TEST REPORT Dist Statement Required: B

Data Item Number: DI-NDTI-80809B Frequency: ASREQ

Contract Reference: SECTION C, E As of Date: N/A

Requiring Office: AMSJM-QAP Date of 1st Submission: 30 DATC

DD 250: NO Date of Subsequent Submission: ASREQ

Distribution Draft Reg Repro

QAR 0 1 0

REMARKS

LOT ACCEPTANCE TEST REPORTS SHALL BE SUBMITTED BY ACCESSING THE WORLDWIDE AMMUNITION DATA CARD REPOSITORY PROGRAM (WARP) WHICH IS located on the Munitions History Program (MHP) website at https://mhp.redstone.army.mil. IAW MIL-DTL-9926070 (AF) dated 3 November 2003

A012

Title: Operations Security (OPSEC) Plan App Code: A

Subtitle: OPSEC Program Dist Statement Required: D

Data Item Number: DI-MGMT-80934C Frequency: ONE/R

Contract Reference: PADDS Clause HS7001 As of Date: ASREQ

Requiring Office: AMSJM-FP/G2 Date of 1st Submission: SEE RMKS*

DD 250: XX Date of Subsequent Submission: SEE RMKS**

Distribution Draft Reg Repro

AMSJM-FP/G2 0 1 0

CO** 0 1 0

REMARKS

DELETE REFERENCE 'APPLYING OPSEC TO U.S. GOVERNMENT CONTRACTS'. REPLACE WITH REFERENCE 'SAMPLE ACQUISITIONS OPSEC PLAN'. 10 CALENDAR DAYS REQUIRED FOR GOVERNMENT REVIEW AND APPROVAL. *30 CALENDAR DAYS AFTER THE CONTRACTING OFFICER PROVIDES THE LIST OF KNOWN CRITICAL INFORMATION (CI)/THREAT INFORMATION. ** RESUBMIT 10 CALENDAR DAYS AFTER GOVERNMENT REVIEW. SUBMIT ELECTRONICALLY TO usarmy.ria.jmc.mbx.OPSEC-FD@mail.mil.

A013

Title:

Critical Safety Item, Characteristic and Critical Defect Report

App Code: A

Subtitle: Process Maps Dist Statement Required: NO

Data Item Number: DI-SAFT-80970A Frequency: ASREQ

Contract Reference: N/A As of Date: AWARD

Requiring Office: AMSJM-QAP Date of 1st Submission: 30DAC

DD 250: NO Date of Subsequent Submission: 60DAC

Distribution Draft Reg Repro

AMSJM-QAP 0 1 0

THROUGH QAR 0 1 0

REMARKS

DRAFT PROCESS MAPS DUE NLT 30 DAYS AFTER CONTRACT AWARD OR DELIVERY ORDER, FINAL DUE 60 DAYS AFTER CONTRACT AWARD OR DELIVERY ORDER. GOVERNMENT APPROVAL IS REQUIRED PRIOR TO INITIATION OF PRODUCTION UNDER THE NEW PROCESS. CONTRACTOR SHALL PREPARE AND SUBMIT CRITICAL CHARACTERISTICS PROCESS MAPS IN CONTRACTOR FORMAT, DESCRIBING HOW THEY ADDRESS ALL CRITICAL CHARACTERISTICS IDENTIFIED IN THE TECHNICAL DATA PACKAGE AND ANY CONTRACTOR IDENTIFIED CRITICAL CHARACTERISTICS. EXAMPLE OF GENERIC PROCESS MAP CAN BE FOUND IN SECTION J OF THE CONTRACT.

PROCESS MAPS SHALL IDENTIFY THE POINTS WITHIN THE PROCESS WHERE DEFECTS ON CRITICAL CHARACTERISTICS COULD BE GENERATED. MAPS SHALL IDENTIFY HOW THE CONTRACTOR IS INSPECTING THE CRITICAL CHARACTERISTICS. UPDATES TO THE FINAL PROCESS MAP WITH CHANGES HIGHLIGHTED SHALL BE PRESENTED TO THE GOVERNMENT FOR APPROVAL ANYTIME THERE IS A CHANGE IN THE PROCESS. SUBMIT

A014

Title:

CRITICAL SAFETY ITEM,

CHARACTERISTIC AND

CRITICAL DEFECT REPORT

App Code: A

Subtitle:

CICCL, NOTIFICATION,

INVESTIGATION,

SEGREGATED MATERIAL

USE AND RESTART

REQUEST

Dist Statement Required: N/A

Data Item Number: DI-SAFT-80970A Frequency: ASREQ

Contract Reference: Contract Section E Clause As of Date: N/A

Requiring Office: AMSJM-QAP Date of 1st Submission: ASREQ

DD 250: NO Date of Subsequent Submission: ASREQ

Distribution Draft Reg Repro

THROUGH QAR 0 1 0

AMSJM-QAP 0 1 0

REMARKS

CICCL, IF APPLICABLE, CONTRACTOR SHALL SUBMIT 60 DAYS PRIOR TO FIRST ARTICLE OR PRODUCTION IF FA IS NOT APPLICABLE. GOVERNMENT WILL RESPOND WITHIN 45 DAYS OF RECEIPT OF ORIGINAL AND ANY REQUIRED REVISIONS. UNLESS OTHERWISE STATED, CONTRACTOR SHALL SUBMIT REVISIONS WITHIN 10 DAYS OF RECEIPT OF GOV'T RESPONSE. NOTIFICATION OF CRITICAL DEFECT, UNLESS OTHERWISE APPROVED BY THE PCO, NOTIFICATION OF THE OCCURRENCE OF ANY CRITICAL DEFECTS SHALL BE MADE TO GOVERNMENT, SEE DISTRIBUTION LIST, WITHIN 24 HOURS OF THE EVENT BY THE MOST EXPEDITIOUS MEANS AVAILABLE. ROOT CAUSE INVESTIGATION AND CORRECTIVE ACTION AND SEGREGATED SUSPECT MATERIAL USE, CONTRACTOR SHALL SUBMIT TO GOV'T, SEE LIST, FOR APPROVAL. GOVERNMENT WILL RESPOND WITHIN 45 DAYS OF RECEIPT OF ORIGINAL AND ANY REQUIRED REVISIONS. REQUEST TO RESTART OPERATIONS, CONTRACTOR SHALL SUBMIT TO GOVERNMENT, SEE LIST, FOR APPROVAL. GOVERNMENT WILL RESPOND WITHIN 10 DAYS OF RECEIPT.

SUBMIT ELECTRONICALLY TO JACOB.R.THOMS.CIV@MAIL.MIL.

A015

Title: SPECIAL INSPECTION EQUIPMENT (SIE) App Code: A

Subtitle: DRWGS & ASSOCIATED LIST* Dist Statement Required: D

Data Item Number: DI-SESS-81004D Frequency: ASREQ

Contract Reference: SOW 3.2.3 As of Date: N/A

Requiring Office: AMSJM-QAP Date of 1st Submission: ASREQ

DD 250: LT Date of Subsequent Submission: ASREQ

Distribution Draft Reg Repro AMSJM-QAP (critical & major characteristics) 0 1 0

RDAR-QEM-A (critical & major characteristics) 0 1 0

QAR/DCMA (critical/major and/or minor characteristics) 0 1 0

REMARKS

*CRITICAL/MAJOR AND/OR MINOR CHARACTERISTICS. (8)COMMENTS/APPROVAL/DISAPPROVAL WILL BE SUBMITTED BY GOV’T WITHIN 45 DAYS OF RECEIPT. REVISIONS WILL BE REVIEWED WITHIN 10 DAYS.

(10)(12)(13)SUBMIT THE DOCUMENTATION 90 DAYS PRIOR TO FIRST ARTICLE TEST. SUBMIT REVISIONS WITHIN 10 DAYS OF CHANGE. (9) DISTRIBUTION STATEMENT D. DISTRIBUTION AUTHORIZED TO THE DEPT OF DEF AND U.S. DOD CONTRACTORS ONLY (CRITICAL TECHNOLOGY)(DATE OF CONTRACT AWARD). OTHER REQUESTS SHALL BE REFERRED TO (GOV’T). WARNING - THIS DOCUMENT CONTAINS TECH DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751, ET SEQ.) OR THE EXPORT ADMINISTRATION ACT OF 1979, AS AMENDED, TITLE 50, U.S.C., APP. 2401 ET SEQ. VIOLATIONS OF THESE EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE IAW PROVISIONS OF DOD DIRECTIVE 5230.25. SUBMIT

A016

Title: SPECIAL INSPECTION EQUIP. DESCRIPTIVE App Code: A

Subtitle: DOCUMENTATION ACCEPTANCE Dist Statement Required: N/A

Data Item Number: DI-QCIC-81006 Frequency: ASREQ

Contract Reference: SECTION E As of Date: N/A

Requiring Office: AMSJM-QAP Date of 1st Submission: ASREQ*

DD 250: XX Date of Subsequent Submission: ASREQ**

Distribution Draft Reg Repro RDAR-QEM-A (critical & major characteristics) 0 1 0

QAR (critical/major and/or minor characteristics) 0 0 0

AMSJM-QAP (critical & major characteristics) 0 1 0

REMARKS

A DD FORM 250 IS NOT REQUIRED. *SUFFICIENTLY PRIOR TO INITIATION OF PRODUCTION OR FIRST ARTICLE TEST, IF CONTRACTUALLY REQUIRED (SEE NOTE BELOW). **WHENEVER ANY REVISION THERETO IS NEEDED FOR ANY REASON. NOTE: THE GOV'T WILL FURNISH DISPOSITION WITHIN 45 DAYS AFTER RECEIPT. E-MAIL: (1) AIE- QEM@CONUS.ARMY.MIL (2) JACOB.R.THOMS.CIV@MAIL.MIL. TEXT: MICROSOFT OFFICE 97 DRAWINGS:

AUTOCAD-RELEASE 14 (EXPRESS MAILED HARD COPIES WILL BE ACCEPTED) FILES MAY BE COMPRESSED USING ZIP PROGRAM. WARNING: LARGE PACKAGES MAY CAUSE DELAYS IN DELIVERY USING MAIL INTERNET. EMAIL

SUBJECT LINE MUST CONTAIN END ITEM NOMENCLATURE.

A017

Title: First Article Qualification Test Plan and Procedures App Code: A

Subtitle: First Article Test Plan & Procedures Dist Statement Required: D

Data Item Number: DI-NDTI-81307A Frequency: ASREQ

Contract Reference: Section E As of Date: N/A

DD 250: XX Date of Subsequent Submission: ASREQ

Distribution Draft Reg Repro

AMSJM-QAP 0 1 0

THROUGH QAR 0 1 0

REMARKS

FIRST ARTICLE TEST PLAN SHALL BE SUBMITTED WITHIN A MINIMUM OF SIXTY (60) DAYS PRIOR TO FIRST ARTICLE TESTING (FAT). DISPOSITION OF PLAN SHALL BE PROVIDED WITHIN THIRTY (30) DAYS OF RECEIPT BY THE PCO. RESUBMITTALS (IF REQUIRED) SHALL BE SENT WITHIN TEN (10) DAYS AFTER GOVERNMENT DISPOSITION. PCO APPROVAL OF TEST PLAN SHALL BE OBTAINED PRIOR TO FIRST ARTICLE TEST. ELECTRONIC SUBMITTALS ARE ACCEPTABLE (MICROSOFT OFFICE FORMAT ONLY). DISTRIBUTION STATEMENT D, DOD USE ONLY. PLAN SHALL INCLUDE ALL VERIFICATIONS BY EXAMINATIONS, ANALYSES, DEMONSTRATIONS OR TESTS NEEDED TO MEET ALL REQUIREMENTS OF PRIME ITEM SPECIFICATION AND DLs. CONTRACTOR FORMAT ACCEPTABLE, SAMPLE AVAILABLE UPON REQUEST. SUBMIT ELECTRONICALLY TO JACOB.R.THOMS.CIV@MAIL.MIL.

APPROVED: KRISTY MOSHER FOR SDMO, RDAR-EIS-PD DATE: 3 December 2012