Questions_Post Site Visit_W50S9B20Q0009.pdf
PDF 99 KB Posted
- Attached to
- Workshop to Classroom Space Conversion, 203rd RHS Federal contract opportunity
- Solicitation number
- W50S9B20Q0009
- Issued by
- Department of the Army National Guard
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Post Site Visit Q_As_W50S9B20Q0009_9 July 2020.pdf | ||
| SOW Attachment 1_Conceptual Drawing_Rev 1 (locked).pptx | PPTX presentation | |
| Sign-In Sheet_Classroom_Redacted.pdf | ||
| W50S9B20Q0009 0001_Extend Response Due Date.pdf | ||
| Minutes_Pre-Bid Site Visit.pdf | ||
| Questions and Answers_W50S9B20Q0009_30 Jun 2020.pdf | ||
| Attach 1_SOW_Classroom Conversion_5 Jun 2020 (Redacted).pdf | ||
| SOW Attachment 2_Existing Photos.pdf | ||
| SOW Attachment 1_Conceptual Drawing.pdf | ||
| W50S9B20Q0009_Classroom Conversion.pdf | ||
| SOW Attachment 3_Schedule of Submittals_29 May 2020.xlsx | XLSX spreadsheet |
Show all 11
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
W50S9B-20-Q-0009, Classroom Conversion Post Site Visit Questions, Unanswered
2 July 2020
The following are the questions received in connection with the 1 July 2020 site visit. The numbering system used is a continuation from the Questions and Answers document dated 30 June 2020. Official answers to these questions are anticipated by 10 July 2020.
Concerning Statement of Work (SOW) 2.3, Demolition and Remaining Structure
Q7. Does the government want to save any of the items demolished/removed for future use?
Q8. After removal of the damper over the double doors how will the vent opening be addressed?
Q9. After demolition of the gas unit heater, will caping the existing roof pipe outside be acceptable?
Concerning SOW 2.4, Structural
Q10. Does the government want to have insulation between the block wall and the drywall for sound deadening?
Q11. If no insulation is required, how much air gap is required between wall and finished drywall?
Q12. Will current epoxy floor remain with no repair?
Q13. The bolts to be removed and filled, will the epoxy floor be repaired?
Q14. Please advise if the cabinet will be wall mount or floor mounted?
Q15. What will be the required cut out size for the double doors (window size)?
Q16. Will the blinds for the cut-out windows need to be built in to glass or will mounted to the door be acceptable?
Concerning SOW 2.5, Plumbing
Q17. What is the size of the new sink?
Q18. The plumbing for the proposed sink area is outside the new cabinet configuration. Will the plumbing be installed and connected on the outside of the new cabinet?
Concerning SOW 2.6, HVAC
Q19. Please advise how the mini split will tie into the existing HVAC System?
Q20. Where are the desired locations of the mini split interior and exterior equipment?
Q21. Will a concrete housekeeping pad need to be poured, or will lightweight pad be acceptable for the condensing unit?
Q22. Is a wall mount bracket for the exterior condensing unit acceptable?
Concerning SOW 2.7, Electrical
Q23. How many lighting zones are required to be dimmed?
Q24. Will there be a GFCI requirement for the sink area?
Concerning SOW 6.1, Drawings
Q25. The Conceptual Drawing shows an item next to the sink. Please advise as to what the item is?
Concerning Project Over All
Q26. Will a lay down area be provided for dumpster/material storage?
---------------------------------- End ----------------------------------
File details come from the government source that posted it. Updated .