Attachment 3 - series-c-f-frame-mccb-td01203013e.PDF

PDF 631 KB Posted Jul 13, 2020

Attached to: 182AW PRESSURE WASHER
Solicitation number: W50S7T20Q0016
Issued by: Department of the Army Illinois Army National Guard

View the file

Other files

File	Type	Posted
W50S7T20Q0016_Questions and Answers dated 14Jul20.pdf	PDF	Jul 14, 2020
W50S7T20Q0016_Questions and Answers dated 13Jul20.pdf	PDF	Jul 13, 2020
W50S7T20Q0016 - Pressure Washer Site Visit Sign in Sheet and Handout.pdf	PDF	Jul 13, 2020
Attachment 1 - Pressure Washers Description of Requirement.pdf	PDF	Jun 18, 2020
Attachment 2 - FAR 52.212-2 Evaluation Factors.pdf	PDF	Jun 18, 2020

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Effective March 2011 Supersedes February 2010Technical Data TD01203013E

F-Frame circuit breaker 10–225 amperes

Product description

• All of Eaton’s F-Frame circuit breakers are

HACR	rated
•	All	F-Frame	thermal-magnetic	circuit	breakers

10–50A	are	suitable	for	HID	(high	intensity
discharge)	use

•	All	F-Frame	circuit	breakers	are	suitable	for
reverse	feed	use

Table 1. Frame Trip Ratings

Frame Ampere Rating

EDB, EDS, EDH, EDC 100–225

EHD 10–100

FDB 10–150

ED, HFD, FDC, HFDDC 15–225

FD 15–225

FDE, HFDE, FDCE 80, 160, 225

The 80A FDE, HFDE, FDCE is adjustable from 15–80A.

The 160A FDE, HFDE, FDCE is adjustable from 60–160A.

The 225A FDE, HFDE, FDCE is adjustable from 100–225A.

Technical Data TD01203013E

F-Frame circuit breaker eAton coRPoRAtion www.eaton.com

Table 2. ULT 489 Interrupting Capacity Ratings circuit Breaker type number of Poles trip type interrupting capacity (Symmetrical Amperes)

Volts Ac (50/60 Hz) Volts Dc

240 277 480 600 125 250 bc

EDB

EDS

2, 3 2, 3

T/M N.I.T. 22,000 42,000

10,000 10,000

EDH

EDC d

2, 3 2, 3 2, 3

T/M N.I.T. 65,000 100,000 200,000

10,000 10,000 10,000

EHD 1

2, 3

T/M N.I.T. — 18,000

14,000

10,000

FDB 2, 3, 4 T/M N.I.T. 18,000 — 14,000 14,000 — 10,000

FD 1

2, 3, 4

T/M N.I.T. — 65,000

35,000

18,000

10,000

HFD 1

2, 3, 4

T/M N.I.T. — 100,000

65,000

25,000

10,000

22,000

FDC d 2, 3, 4 T/M N.I.T. 200,000 — 100,000 35,000 — 22,000 HFDDC e 3 T/M N.I.T. — — — — — 50,000 f

FDE

HFDE

FDCE d

Electronic N.I.T.

65,000 100,000 200,000

35,000 65,000 100,000

18,000 25,000 25,000

	N.I.T. is non-interchangeable trip unit. T/M is thermal-magnetic. For DC applications, magnetics are approximately 40% higher.
b	Two-pole circuit breaker, or two poles of three-pole circuit breaker.
c	Time constant is 3 milliseconds minimum at 10 kA and 8 milliseconds minimum at 22 kA.
d	Current limiting.
e	HFDDC is UL only and is not tested to other standards.
f	Interrupting rating is 42,000A at 600 Vdc with three-poles in series.

Table 3. Line and Load Terminals

Maximum Breaker Amperes terminal Body Material

Wire type

AWG Wire Range

Metric Wire Range (mm2) catalog number (Package of 3 terminals)

Standard Pressure Type Terminals

20 (EHD)

Steel Steel Aluminum Aluminum

Cu/Al Cu/Al Cu/Al Cu/Al

(1) #14–#10

(1) #14–1/0

(1) #4–4/0

2.5–4 2.5–50 25–95 25–95

3T20FB

3T100FB

3TA150FB

3TA225FD

Optional Pressure Terminals

Aluminum Aluminum Aluminum

Cu/Al Cu/Al Cu/Al

(1) #14–#4

(1) #14–1/0

(1) #6–300 kcmil

2.5–16 2.5–50 16–150

3TA50FB

3TA100FD

3TA225FDK b

	UL listed for use with copper or aluminum conductors as noted.
b	Use only on 175–225A. Includes terminal shield and increases height.

Table 4. Approximate Shipping Weight in Lbs (kg) circuit Breaker type number of Poles

1 2 3 4

ED, EDB, EDS, EDH, EDC — 3 (1.4) 4.5 (2.0) —

EHD, FDB, FD, HFD, HFDDC, FDC 2 (0.9) 3 (1.4) 4.5 (2.0) 6 (2.7)

FDE, HFDE, FDCE — — 4.2 (1.9) —

Table 5. Dimensions in Inches (mm)

Dimensions number of Poles

1 2 3 4

Height 6.00 (152.4) 6.00 (152.4) 6.00 (152.4) 6.00 (152.4) Width 1.38 (34.8) 2.75 (69.9) 4.13 (104.8) 5.50 (139.7) Depth 3.38 (85.7) 3.38 (85.7) 3.38 (85.7) 3.38 (85.7)

Technical Data TD01203013E

Dimensions in inches (mm)

Figure 1. Single-Pole F-Frame Breaker

Figure 2. Two-Pole F-Frame Breaker

Figure 3. Three-Pole F-Frame Breaker

Figure 4. Four-Pole F-Frame Breaker

1.38 (34.8)

3.38 (85.7)

6.00 (152.4)

4.12 (104.7)

2.75 (69.9)

3.38 (85.7)

6.00 (152.4)

4.12 (104.7)

4.13 (104.8)

3.38 (85.7)

6.00 (152.4)

4.12 (104.7)

5.50 (139.7)

3.38 (85.7)

6.00 (152.4)

4.12 (104.7) otee:N For curves and additional technical information, please visit our Web site at www.eaton.com.

Technical Data TD01203013E

Figure 5. Type FD Single-Pole Outline

0.74 (18.8)

0.50 (12.7)

1.00 (25.4)

0.69 (17.5)

0.02 (.4)

0.34 (8.7)

0.16 R

(4.1 R)

0.45 (11.4) diameter 2 holes

0.11 (2.8) diameter x 0.31 (7.9) deep, 1 hole accept #6 (M3.5) thread cutting screws0.19 R

(4.8 R)

0.38 (9.5)

0.74 (18.8)

0.17 (4.4)

0.09(2.3) R (Typ.)

4-PLC’S.

1.77 (44.8)

0.75 (19.1)

0.08 (2.0)

0.27 (6.8)

0.47 (11.9)0.63

(15.9)

1.13 (28.6)

3.00 (76.2)

6.00 (152.4)

0.44 (11.1)

0.19 (4.8)

1.25 (31.8)

2.38 (60.3)

0.47 (11.9)

0.31 (8.0)

0.27 (6.8)

0.25 (6.4)

0.75 (19.1)

0.06 (1.6)

0.08 (19.8)

2.22 (56.4)

2.94 (74.6)

3.19 (81.0)

3.38 (85.7)

3.50 (88.9)

E D B A

To top of clip

0.50 (12.7) wide conductor with

0.22 (5.6) diameter hole

2.35 (59.7) R

Handle: 0.34 (8.7) wide x 0.38 (9.5) thick 0˚ taper, load end 7˚ taper, line end

0.50 (12.7) wide conductor with 0.22 (5.6) diameter hole

Trough for attachment leads0.22 (5.6)

0.09 R

(2.4) R

1.56 (39.7)

0.82 (20.8)

1.03 (26.2)

2.72 (69.1)

4.50 (114.3)

1.41 (35.7)

0.75 (19.1)

1.56 (39.7)

1.38 (34.9)

53˚

4.00 (101.6)

Reproduced from drawings 1490D61 and 1490D65 Dimensions in parentheses in millimeters

Front View

Side View

Line End

Load End

Dimensions Handle force, lbs.A B E

On 3.07 (78.0) 2.92 (74.2) 3.96 (100.6) 3.40 (86.4) 3.33 (84.6) 8 Tripped 2.65 (67.3) 2.57 (65.3) 4.06 (103.1) 2.99 (75.9) 2.98 (75.7) 3 Off 2.08 (52.8) 2.14 (54.4) 4.12 (104.7) 2.42 (61.5) 2.56 (65.0) 9 Reset 1.98 (50.3) 2.05 (52.1) 4.11 (104.4) 2.30 (58.4) 2.48 (63.1) 10

Breaker status

Measured 0.125 (3.175) above Escutcheon.

Applied by breaker handle to external handle mechanism.

0.02 (.4)

0.75 (19.1)

On Off

Push to trip

C D

Technical Data TD01203013E

Figure 6. Type FD Single-Pole Outline Drilling Plans

0.59 (15.1)

Breaker handle

0.25 (6.4) R

0.19 (4.8) Diameter

Location of 0.50 (12.7) diameter megger holes, if required

0.164-32 (M4 x 0.7) tap, 2 holes

0.69 (17.5)

0.44 (11.1) diameter holes for 15 to 100A

0.56 (14.3) diameter holes for 125 to 150A

0.47 (11.9)

Breaker handle

1.19 (30.2)

0.58 14.8)

2.31 (58.8)

1.91 (48.4)

2.91 (73.8)

1.38 (34.9)

2.88 (73.0)

4.50 (114.3)

0.75 (19.1)

3.16 (73.0)

5.06 (114.3)

Front Cover Cutout Drilling Plans Front Connected Rear Connected

Line End Line End Line End

Load End

Technical Data TD01203013E

Figure 7. Type FD Two-Pole Outline

0.11 (2.8) diameter x .31 (7.9) deep, 2 holes accept #6 (M3.5) thread cutting screws

0.02 (0.4)

0.69 (17.5)

0.34 (8.7)

0.45 (11.4) diameter 4 holes

0.16 (4.0) R

1.38 (34.9)

1.03 (26.2)

0.47 (11.9)

53˚ 3.38 (85.7)

0.50 (12.7)0.19

(4.8)

To top of clip

0.50 (12.7) wide conductor with

0.22 (5.6) diameter hole [0.25 (6.4) diameter hole ≥ 175A]

2.35 (59.7) R

Handle:

0.34 (8.7) wide x

0.38 (9.5) thick 0˚ taper, load end 7˚ taper, line end

0.50 (12.7) wide conductor with 0.22 (5.6) diameter hole [0.26 (6.6) diameter hole ≥ 175A]

Trough for attachment leads

0.13 (3.2) x 0.75 (19.1) slots for attachment leads

0.22 (5.6)

0.09 R

(2.4) R

2.75 (69.9)

E D B A

1.38 (34.9)

1.33 (33.7)

0.38 (9.5)

0.13 (3.2) diameter x

0.48 (12.3) deep, 3 holes accept #8 (M4) thread cutting screws

0.82 (20.8)

0.09 (2.3) R (Typ.)

4-PLC’S.

0.20 (5.0) diameter hole

0.33 (8.3) diameter c‘bore

1.94 (49.2) deep from top

0.34 (8.7) diameter c‘bore

0.66 (16.7) deep from bottom 2 mounting holes for 0.164-32 [#8] (M4 x 0.7) x

1.50 (38.1) mounting screws

1.72 (43.7)

Reproduced from drawings 1490D62 and 1490D66 Dimensions in parentheses in millimeters

Front View

Load End

Line End

Side View

Dimensions Handle force, lbs.A E

On 3.07 (78.0) 2.92 (74.2) 3.96 (100.6) 3.40 (86.4) 3.33 (84.6) 12 Tripped 2.65 (67.3) 2.57 (65.3) 4.06 (103.1) 2.99 (75.9) 2.98 (75.7) 4 Off 2.08 (52.8) 2.14 (54.4) 4.12 (104.7) 2.42 (61.5) 2.56 (65.0) 15 Reset 1.98 (50.3) 2.05 (52.1) 4.11 (104.4) 2.30 (58.4) 2.48 (63.1) 20

Breaker status

Measured 0.13 (3.18) above Escutcheon.

Applied by breaker handle to external handle mechanism.

0.38 (9.5)

0.74 (18.8)

1.56 (39.7)

0.19 R

(4.8 R)

4.50 (114.3)

0.75 (19.1)

4.00 (101.6)

0.02 (0.4)

0.74 (18.8)

0.50 (12.7)

1.00 (25.4)

0.69 (17.5)

1.56 (39.7)

0.27 (6.8)

0.25 (6.4)

0.75 (19.1)

0.06 (1.6)

0.08 (19.8)

2.22 (56.4)

2.94 (74.6)

3.19 (81.0)

3.38 (85.7)

3.50 (88.9)

0.47 (11.9)

0.31 (8.0)

0.47 (11.9)

0.63 (15.9)

1.13 (28.6)

3.00 (76.2)

6.00 (152.4)

1.77 (44.8)

0.75 (19.1)

0.08 (2.0)

0.27 (6.8)

2.38 (60.3)

2.72 (69.1)

1.41 (35.7)

0.17 (4.4)

0.19 (4.8)

1.25 (31.8)

On Off

Push to trip

B C D

Technical Data TD01203013E

Figure 8. Type FD Two-Pole Outline Drilling Plans

1.19 (30.2)

0.59 (15.1)

0.58 (14.8)

Breaker handle

0.25 (6.4) R

0.19 (4.8) diameter

Location of 0.50 (12.7) diameter megger holes, if required

0.164-3 2 (M4 x 0.7) tap, 2 holes

0.69 (17.5)

0.44 (11.1) diameter holes for 15 to 100A

0.56 (14.3) diameter holes for 125 to 150A

0.47 (11.9)

Breaker handle

1.38 (34.9)

1.91 (48.4)

2.91 (73.8)

2.88 (73.0)

4.50 (114.3)

0.75 (19.1)

3.16 (80.2)

5.06 (128.6)

2.31 (58.8)

Breaker handle

Front Cover Cutout Drilling Plans Front Connected Rear Connected

Line EndLine EndLine End

Load End Load EndLoad End

Technical Data TD01203013E

Figure 9. Type FD Three-Pole Outline

Reproduced from drawings 1490D63 and 1490D67 Dimensions in parentheses in millimeters

Front View

Line End

Load End

Side View

0.38 (9.5)

0.45 (11.4) diameter 6 holes

0.11 (2.8) dia.

x 0.31 (7.9) deep, 2 holes accept #6 (M3.5) thread cutting screws

0.09 (2.3) R (Typ.)

4-PLC’S.

53˚

To top of clip

0.50 (12.7) wide conductor with

0.22 (5.6) diameter hole [0.25 (6.4) diameter hole ≥ 175A]

2.35 (59.7) R

Handle:

0.34 (8.7) wide x

0.38 (9.5) thick 0˚ taper, load end 7˚ taper, line end

0.50 (12.7) wide conductor with 0.22 (5.6) diameter hole [0.26 (6.6) diameter hole ≥ 175A]

Trough for attachment leads

0.13 (3.2) x .75 (19.1) slots for attachment leads

0.20 (5.0) diameter hole

0.33 (8.3) diameter c'bore

1.94 (49.2) deep from top.

0.34 (8.7) diameter c'bore

0.66 (16.7) deep from bottom.

4 munting holes for .164-32 (No. 8) x 1.50 (M4 x 0.7 x 38.1) mounting screws.

0.19 (4.8)R

0.38 (9.5)

0.16 R

(4.0) R

2.06 (52.4)

1.72 (43.7)

E D B A

0.13 (3.2) x

0.48 (12.3) deep 6 holes accept #8 (M4) thread cutting screws

Breaker status

Measured 0.13 (3.18) above Escutcheon.

Applied by breaker handle to external handle mechanism.

Dimensions Handle force, lbs.A E

On 3.07 (78.0) 2.92 (74.2) 3.96 (100.6) 3.40 (86.4) 3.33 (84.6) 14 Tripped 2.65 (67.3) 2.57 (65.3) 4.06 (103.1) 2.99 (75.9) 2.98 (75.7) 4 Off 2.08 (52.8) 2.14 (54.4) 4.12 (104.7) 2.42 (61.5) 2.56 (65.0) 16 Reset 1.98 (50.3) 2.05 (52.1) 4.11 (104.4) 2.30 (58.4) 2.48 (63.1) 21

0.38 (9.5)

0.74 (18.8)

1.56 (39.7)

1.03 (26.2)

1.38 (34.9)

0.82 (20.8)

0.75 (19.1)

1.41 (35.7)

1.38 (34.9)

4.50 (114.3)

0.75 (19.1)

0.02 (0.4)

0.17 (4.4)

0.02 (0.4)

0.69 (17.5)

0.34 (8.7)

4.00 (101.6)

0.50 (12.7)

1.00 (25.4)

4.13 (104.8)

0.74 (18.8)

1.56 (39.7)

0.08 (19.8)

2.22 (56.4)

2.94 (74.6)

3.19 (81.0)

3.38 (85.7)

3.50 (88.9)

0.27 (6.8)

0.25 (6.4)

0.75 (19.1)

0.06 (1.6)

0.19 (4.8)

0.47 (11.9)

0.31 (8.0)

0.47 (11.9)

2.38 (60.3)

3.38 (85.7)

0.50 (12.7)

0.22 (5.6)

3.00 (76.2)

6.00 (152.4)

0.63 (15.9)

1.13 (28.6)

0.27 (6.8)

0.47 (11.9)

1.77 (44.8)

0.75 (19.1)

0.08 (2.0)

0.09 R

(2.4) R

1.33 (33.7) 1.33

(33.7)

0.19 (4.8)

1.25 (31.8)

On Off

Push to trip

B C D

Technical Data TD01203013E

Figure 10. Type FD Three-Pole Outline Drilling Plans

1.19 (30.2)

0.59 (15.1)

0.58 (14.8)

Breaker handle

0.25

0.19 (4.8) Diameter

Location of 0.50 (12.7) diameter megger holes, if required

0.164-32 (M4 x 0.7) tap, 4 holes

0.69 (17.5)

0.44 (11.1) diameter holes for 15 to 100A

0.56 (14.3) diameter holes for 125 to 150A

0.47 (11.9)

Breaker handle

1.38 (34.9)

1.91 (48.4)

2.91 (73.8)

2.88 (73.0)

4.50 (114.3)

0.75 (19.1)

1.38 (34.9)

3.16 (80.2)

5.06 (128.6)

2.31 (58.8)

2.75 (69.9)

Breaker handle

Front Cover Cutout Drilling Plans Front Connected Rear Connected

Line End Line End

Load End

Line End

Load End

Optional Ring Terminal Dimensions

0.27 (6.8)

0.73 (18.5)

Dia. 0.22 (<=160A) (5.6)

0.25 (>160A) (6.4)

Technical Data TD01203013E

Figure 11. Type FD Four-Pole Outline

E D B A

53˚

To top of clip

0.500 (12.70) wide conductor with

0.219 (5.56) diameter hole [0.250 (6.35) diameter hole ≥ 175A]

2.35 (59.7) R

Handle:

0.34 (8.7) wide x

0.38 (9.5) thick 0˚ taper, load end 7˚ taper, line end

0.50 (12.7) wide conductor with 0.22 (5.6) diameter hole [0.26 (6.6) diameter hole ≥ 175A]

Trough for attachment leads

0.125 (3.18) x 0.750 (19.05) slots for attachment leads

0.09 R

(2.4) R

0.45 (11.4) diameter 8 holes

0.11 (2.8) diameter x

0.31 (7.9) deep, 4 holes accept #6 (M3.5) thread cutting screws

0.16 (4.0) R

0.13 (.32) diameter x

0.49 (12.3) deep, 6 holes accept #8 (M4) thread cutting screws

2.72 (69.1)

0.19 R

(4.8) R

0.09 (2.3)R (Typ.)

4-PLCs

0.20 (5.0) dia hole

0.33 (8.3) dia c‘bore

1.94 (49.2) deep from top

0.34 (8.7) dia c‘bore

0.66 (16.7) deep from bottom 2 mounting holes for 0.164-32 [#8] (M4 x 0.7) x 1.50 (38.1) mounting screws

5.50 (139.7)

Reproduced from drawings 1490D64 and 1490D68 Dimensions in parentheses in millimeters

Front View

Side View

Load End

Line End

Breaker status

Measured 0.13 (3.18) above Escutcheon.

Applied by breaker handle to external handle mechanism.

Dimensions Handle force, lbs.A E

0.38 (9.5)

0.74 (18.8)

1.56 (39.7)

1.38 (34.9)

1.03 (26.2)

0.82 (20.8)

1.72 (43.7)

0.75 (19.1)

1.41 (35.7)

4.50 (114.3) 0.38

(9.5)

0.75 (19.1)

0.02 (0.4)

0.17 (4.4) 1.38

(34.9)

0.02 (0.4)

0.69 (17.4) 1.38

(34.9)

1.33 (33.7)

0.34 (8.7)

4.00 (101.6)

0.08 (19.8)

2.22 (56.4)

2.94 (74.6)

3.19 (81.0)

3.38 (85.7)

3.50 (88.9)

0.27 (6.8)

0.25 (6.4)

0.75 (19.1)

0.06 (1.6)

0.19 (4.8)

0.47 (11.9)

0.31 (8.0)

0.47 (11.9)

2.38 (60.3)

0.50 (12.7)

0.22 (5.6)

3.38 (85.7)

3.00 (76.2)

6.00 (152.4)

0.63 (15.9)

1.13 (28.6)

0.19 (4.8) 1.25 (31.8)

0.27 (6.8)

1.77 (44.8)

0.75 (19.1)

0.08 (2.0)

2.06 (52.4)

0.50 (12.7)

1.00 (25.4)

0.74 (18.8)

1.56 (39.7)

0.47 (11.9)

On Off

Push to trip

0.38 (9.5)

B C D

Technical Data TD01203013E

Figure 12. Type FD Four-Pole Outline Drilling Plans

1.19 (30.2)

0.59 (15.1)

Breaker handle

0.25 (6.4) R

0.19 (4.8) diameter

Location of 0.50 (12.7) diameter megger holes, if required

0.164-32 (M4 x 0.7) tap, 6 holes

0.69 (17.5)

0.44 (11.1) diameter holes for 15 to 100A

0.56 (14.3) diameter holes for 125 to 150A

0.47 (11.9)

Breaker handle

1.38 (35.0) 1.38

(34.9)

1.91 (48.4)

2.91 (73.8)

2.88 (73.0)

4.50 (114.3)

0.75 (19.1)

3.16 (80.2)

5.06 (128.6)

2.31 (58.8)

Breaker handle

1.38 (35.0)

0.58 (14.8)

1.38 (34.9)

2.75 (69.9)

4.13 (104.8)

Front Cover Cutout Drilling Plans Front Connected Rear Connected

Line End Line End Line End

Load End

Eaton Corporation

Electrical	Sector
1111	Superior	Ave.
Cleveland,	OH	44114
United	States
877-ETN-CARE	(877-386-2273)

Eaton.com

©	2011	Eaton	Corporation
All	Rights	Reserved
Printed	in	USA
Publication	No.	TD01203013E	/	Z10989
March	2011

Technical Data TD01203013E

Eaton	is	a	registered	trademark
of	Eaton	Corporation.

All	other	trademarks	are	property
of	their	respective	owners.

File details come from the government source that posted it. Updated Jul 13, 2020.