Technical review questions and answers.pdf
PDF 90 KB Posted
- Attached to
- Forklift Truck Electric
- Solicitation number
- W25G1V23Q0098
About this file
This document contains technical questions and answers regarding solicitation number W25G1V23Q0098 for an electric forklift truck. The solicitation seeks a new electric forklift with a minimum load capacity of 4,000 pounds at a 24-inch load center. Lugged cushion tires are required for indoor use. While the request references the Hyster brand, it is a brand name or equal requirement. The forklift may be manufactured in China provided it complies with the foreign acquisition clauses in the solicitation. A fork positioner is not necessary as manual fork positioning is acceptable.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| W25G1V23Q0098.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
W25G1V23Q0098 Forklift Electric 4000lb
Technical Comments and Questions
Comments/Questions on Specifications Technical Answers/Remarks
CAPACITY: Is 4000-lbs the nominal standard forklift size needed, or does customer actually need to lift 4000-lbs?
4,000 pounds at 24 inch load center is nominal. It is understood that there is a derate associated with a stage mast as it is raised.
Specification says "Minimum load capacity of 4,000 pounds at 24-inch load center”.
A nominal 4000-lb forklift will derate with 3-stage mast and side shift so max capacity will be less than 4000 pounds.
TIRES: Will forklift be used outside? If so, would customer prefer solid pneumatic tires in lieu of lugged cushion tires?
Forklift is primarily for indoor use. Lugged cushion tires shall be provided.
A. Could you please confirm if you accept the Forklift Truck Electric manufactured in China?
All the information on Foreign aqusititions is contained in the clause section of the solicitation.
B. If so, Would you be able to provide us with a Tax Exemption Certificate? Yes
A. Do you want a fork positioner? It says manual which would be to move the forks yourselves.
A. A fork positioner is not required. Manual fork positioning is understood.
B. I noticed on the top of the request that it says Hyster. Are you brand specific or open to other brands. This is to be new as well, correct?
B. This is a brand name or equal requirement. Forklift shall be new.
File details come from the government source that posted it. Updated .