UWEC Residence Hall 04022020.pdf
PDF 3 MB Posted
- Attached to
- Residence Hall Irrigation Installation
- Solicitation number
- BV-208054
- Issued by
- Wisconsin
About this file
This is an irrigation system design document for the University of Wisconsin-Eau Claire (UWEC) Residence Hall located in Eau Claire, Wisconsin. The document provides detailed technical specifications and layout plans for an in-ground irrigation installation project that encompasses turf and landscape areas surrounding a new residential hall. The irrigation system design includes Hunter brand turf rotators (MP Strip, MP1000, and MP2000 models in 4-inch and 12-inch configurations), shrub rotators, control valves, a Febco 825Y reduced pressure backflow preventer, a Baseline BL-5315 soil moisture sensor, a Baseline sub-station controller, and a Flowmec QS200-20 insertion flowmeter. The system is designed to connect to an existing Baseline 3200 controller at Bridgman Hall via Ethernet radio communication. The design analysis indicates a water source with 70.55 gallons per minute (gpm) available flow at 50 psi static pressure, supplemented by an Aquamark AM60-V booster pump providing an additional 40 psi, resulting in 87 psi total pressure available. The critical system design station (Station 12) requires 51.59 psi, with residual pressure available of 13.59 psi, confirming adequate system capacity.
The irrigation design utilizes polyethylene pipe for lateral lines and PVC Class 200 SDR 21 pipe for mainline and sleeves. The system incorporates a 2-inch water meter, with a maximum multi-valve flow of 56 gpm and residual flow availability of 14.55 gpm at the point of connection. Installation specifications include valve boxes with permanent labeling, grounding requirements of 10 ohms or less with grounding readings to be documented on as-built drawings, and two-wire decoder paths for zone control. The project drawings were generated on April 2, 2020, with design completed by Mainline Consulting (Project #050119, dated 05/09/19). The detailed design sheets (IR-1, IR-2, and IR-3) provide irrigation layout, system details, and installation specifications including controller mounting at 60 inches above finished grade, valve box placement with proper drainage, and integration with the campus's existing irrigation infrastructure.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| DOA-3027DesignationofConfidentialandProprietaryInformation.doc | DOC document | |
| DOA-3832 BidderRequiredForm.doc | DOC document | |
| BV-208054.docx | DOCX document | |
| UWEC Towers IRRGDSGN 04022020.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
w w
BK
G
K K
KK
K
K
KK
M
MM
M M
M M M
M
MM
K
K
K
K
KK
K K
K K
K
K
K
K K K
KK
K
K
K
K
K
KK
K
G
G
K K
K K
KR
R
M
M
1"
4"
4"
4"
4"
2"
SS SS
SS
6.381 1"
51.22
2"
49.63
2"
7.104 1" 522.9
1"
64.62 1" 719.5
1"
837.5
2"
12.49 1"
28.510
2"
2"
2"
4"
4"
4"
2"
1"
4"
4"
4"
2"
4"
1"
2" 2"
4" 1"
2"
2"
SS
FIELD VERIFY SUB-STATION LOCATION AND POWER
LOCATION. VERIFY THAT SUB-STATION CONNECTS, VIA
ETHERNET RADIO, TO EXISTING BASELINE 3200 AT
BRIDGMAN HALL.
4" 11
4"
2"
2"2"
G
4"
K K K
37.511
2"
2"
2"
4"
2"2"
2"
49.512
2"
28.913
2"
1418.0
2"
EXISTING
DRIVE
2"
GR
GR
GR
4"
2"
4" SLEEVE PLACED BY OWNER,
FIELD VERIFY LOCATION/SIZE
1"
2" 11
4"
156.89 1"
1"
1"
2" 2"
2"
1"
2"
4"
2"
4"
4"
SYMBOL MANUFACTURER/MODEL/DESCRIPTION
HUNTER MP STRIP PROS-04-PRS40-CV
TURF ROTATOR, 4" (10.16 CM) POP-UP WITH FACTORY
INSTALLED CHECK VALVE, PRESSURE REGULATED TO 40
PSI (2.76 BAR), MP ROTATOR NOZZLE ON PRS40 BODY.
LST=IVORY LEFT STRIP, SST=BROWN SIDE STRIP,
RST=COPPER RIGHT STRIP.
HUNTER MP1000 PROS-04-PRS40-CV
TURF ROTATOR, 4" (10.16 CM) POP-UP WITH CHECK
VALVE, PRESSURE REGULATED TO 40 PSI (2.76 BAR), MP
ROTATOR NOZZLE ON PRS40 BODY. M=MAROON ADJ
ARC 90 TO 210, L=LIGHT BLUE 210 TO 270 ARC, O=OLIVE
360 ARC.
HUNTER MP2000 PROS-04-PRS40-CV
TURF ROTATOR, 4" (10.16 CM) POP-UP WITH FACTORY
INSTALLED CHECK VALVE, PRESSURE REGULATED TO 40
PSI (2.76 BAR), MP ROTATOR NOZZLE ON PRS40 BODY.
K=BLACK ADJ ARC 90-210, G=GREEN ADJ ARC 210-270,
R=RED 360 ARC.
HUNTER MP STRIP PROS-12-PRS40-CV
SHRUB ROTATOR, 12" (30.48 CM) POP-UP WITH FACTORY
INSTALLED CHECK VALVE, PRESSURE REGULATED TO 40
PSI (2.76 BAR), MP ROTATOR NOZZLE. LST=IVORY LEFT
STRIP, SST=BROWN SIDE STRIP, RST=COPPER RIGHT
STRIP, ON PRS40 BODY.
HUNTER MP1000 PROS-12-PRS40-CV
SHRUB ROTATOR, 12" (30.48 CM) POP-UP WITH CHECK
VALVE, PRESSURE REGULATED TO 40 PSI (2.76 BAR), MP
ROTATOR NOZZLE. M=MAROON ADJ ARC 90 TO 210,
L=LIGHT BLUE 210 TO 270 ARC, O=OLIVE 360 ARC ON
PRS40 BODY.
HUNTER MP2000 PROS-12-PRS40-CV
SHRUB ROTATOR, 12" (30.48 CM) POP-UP WITH CHECK
VALVE, PRESSURE REGULATED TO 40 PSI (2.76 BAR), MP
ROTATOR NOZZLE. K=BLACK ADJ ARC 90-210, G=GREEN
ADJ ARC 210-270, R=RED 360 ARC ON PRS40 BODY.
HUNTER MP3000 PROS-12-PRS40-CV
SHRUB ROTATOR, 12" (30.48 CM) POP-UP WITH CHECK
VALVE, PRESSURE REGULATED TO 40 PSI (2.76 BAR), MP
ROTARY NOZZLE. B=BLUE ADJ ARC 90-210, Y=YELLOW
ADJ ARC 210-270, A=GRAY 360 ARC ON PRS40 BODY.
SYMBOL MANUFACTURER/MODEL/DESCRIPTION
HUNTER I-20-04
TURF ROTOR, 4.0" POP-UP. ADJUSTABLE AND FULL
CIRCLE. PLASTIC RISER. DRAIN CHECK VALVE.
STANDARD NOZZLE.
HUNTER I-20-04
TURF ROTOR, 4.0" POP-UP. ADJUSTABLE AND FULL
CIRCLE. PLASTIC RISER. DRAIN CHECK VALVE.
STANDARD NOZZLE.
HUNTER I-20-04
TURF ROTOR, 4.0" POP-UP. ADJUSTABLE AND FULL
CIRCLE. PLASTIC RISER. DRAIN CHECK VALVE.
STANDARD NOZZLE.
HUNTER I-20-04
TURF ROTOR, 4.0" POP-UP. ADJUSTABLE AND FULL
CIRCLE. PLASTIC RISER. DRAIN CHECK VALVE.
STANDARD NOZZLE.
SYMBOL MANUFACTURER/MODEL/DESCRIPTION
HUNTER ICV-G
1", 1-1/2", 2", AND 3" PLASTIC ELECTRIC REMOTE
CONTROL VALVES, GLOBE CONFIGURATION, WITH NPT
THREADED INLET/OUTLET, FOR COMMERCIAL/MUNICIPAL
USE.
HUNTER ICV-G 2"
1", 1-1/2", 2", AND 3" PLASTIC ELECTRIC MASTER VALVE,
GLOBE CONFIGURATION, WITH NPT THREADED
INLET/OUTLET, FOR COMMERCIAL/MUNICIPAL USE.
FEBCO 825Y 2"
REDUCED PRESSURE BACKFLOW PREVENTER
BASELINE BL-5315
BISENSOR SOIL MOISTURE SENSOR
BASELINE BL-SUBSTN-X
16 GAUGE, POWDER-COATED CABINET-WALL MOUNT
ENCLOSURE. USE WITH BASELINE 3200 CONTROLLER TO
CONSOLIDATE THE AMOUNT OF CONTROLLERS NEEDED
ON SITE.
FLOWMEC QS200-20
2" INSERTION FLOWMETER, SCHEDULE 80 PVC HOUSING.
0.92-138 GPM RANGE, MAX. OPERATING PRESSURE 150
PSI. 2-WIRE CONNECTOR W/ LED INDICATORS FOR
POWER AND PULSE. STORAGE TEMPS -20 F TO +160 F.
AQUAMARK BOOSTER PUMP
AM60-V
GROUNDING LOCATION
8` GROUND ROD WITH WELDED COPPER LEAD. GROUND
PLATE WITH WELDED LEAD ALSO ACCEPTABLE. ADD
LENGTH/POWER SET TO ACHIEVE 10 OHM`S OR LESS.
INDICATE GROUNDING READINGS ON AS-BUILT
DRAWINGS.
WATER METER 2"
IRRIGATION LATERAL LINE: POLYETHYLENE PIPE SDR-7
IRRIGATION LATERAL LINE: PVC CLASS 200 SDR 21
IRRIGATION MAINLINE: PVC CLASS 200 SDR 21
PIPE SLEEVE: PVC CLASS 200 SDR 21
M O
K G R
B Y A
SS
SS
GR
IRRIGATION SCHEDULE
Generated: 2020-04-02 10:50
P.O.C. NUMBER: 01
Water Source Information:
FLOW AVAILABLE
Water Meter Size: 2" Flow Available: 70.55 gpm
PRESSURE AVAILABLE
Static Pressure at POC: 50.00 psi Elevation Change: 5.00 ft Service Line Size: 2" Length of Service Line: 20.00 ft Booster Pump pressure provided: 40.00 psi Pressure Available: 87.00 psi
DESIGN ANALYSIS
Maximum Multi-valve Flow: 56.00 gpm Flow Available at POC: 70.55 gpm Residual Flow Available: 14.55 gpm
Critical Station: 12 Design Pressure: 45.00 psi Friction Loss: 4.01 psi Fittings Loss: 0.40 psi Elevation Loss: 0.00 psi Loss through Valve: 2.18 psi Pressure Req. at Critical Station: 51.59 psi Loss for Fittings: 0.53 psi Loss for Main Line: 5.28 psi Loss for POC to Valve Elevation: 0.00 psi Loss for Backflow: 12.13 psi Loss for Master Valve: 1.50 psi Loss for Water Meter: 2.38 psi Critical Station Pressure at POC: 73.41 psi Pressure Available: 87.00 psi Residual Pressure Available: 13.59 psi
CRITICAL ANALYSIS
SYMBOL DESCRIPTION
CONNECT TO EXISTING SYSTEM. EXTEND NEW TWO-WIRE PATH
TO EXISTING ZONES AND SUPPLY DECODERS AS REQUIRED FOR
OPERATION - TYPICAL.
UTILIZE BASELINE DECODERS FOR ALL NEW ZONES. CONNECT
TO TWO-WIRE PATH AND TO SUB-STATION AS REQUIRED.
REFERENCE NOTES SCHEDULE
U W
E C
R e si d e n c e H a ll
E au
C la ir e, W is co n si n
P R
O
JE
C T
S H
E E
T T
IT
L
E
SHEET NUMBER
R E
V
IS
IO
N
S
D R
A W
IN
G
S
A S N
O T
E D
M
JC JW
R
952.447.2053 7620 Jennifer Lane
Prior Lake, MN 55372 www.mainlineconsulting.net
IR
R
IG
A
TI
O
N L
A Y
O U
T
IR-1
SCALE:
feet30 60 90
1" = 30'
AutoCAD SHX Text
SS
AutoCAD SHX Text 1.5
AutoCAD SHX Text 1.5
AutoCAD SHX Text 1.5
AutoCAD SHX Text 1.5
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 6.0
AutoCAD SHX Text 6.0
AutoCAD SHX Text 1.5
AutoCAD SHX Text 1.5
AutoCAD SHX Text 1.5
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 6.0
AutoCAD SHX Text 1.5
AutoCAD SHX Text 1.5
AutoCAD SHX Text 1.5
AutoCAD SHX Text 1.5
AutoCAD SHX Text 1.5
AutoCAD SHX Text 1.5
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 6.0
AutoCAD SHX Text 6.0
AutoCAD SHX Text 6.0
AutoCAD SHX Text 6.0
AutoCAD SHX Text 6.0
AutoCAD SHX Text 6.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 1.5
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text M
AutoCAD SHX Text
BF
AutoCAD SHX Text 1.5
AutoCAD SHX Text 1.5
AutoCAD SHX Text 1.5
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 6.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text
MV
AutoCAD SHX Text
FS
AutoCAD SHX Text 1.5
AutoCAD SHX Text 1.5
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 6.0
AutoCAD SHX Text 1.5
AutoCAD SHX Text 1.5
AutoCAD SHX Text 1.5
AutoCAD SHX Text 1.5
AutoCAD SHX Text 1.5
AutoCAD SHX Text 1.5
AutoCAD SHX Text 2.0
AutoCAD SHX Text 2.0
AutoCAD SHX Text 2.0
AutoCAD SHX Text 2.0
AutoCAD SHX Text 2.0
AutoCAD SHX Text 2.0
AutoCAD SHX Text
BP
AutoCAD SHX Text 1.5
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 1.5
AutoCAD SHX Text 1.5
AutoCAD SHX Text 1.5
AutoCAD SHX Text 1.5
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text
LST
AutoCAD SHX Text
RST
AutoCAD SHX Text
SST
AutoCAD SHX Text M
AutoCAD SHX Text L
AutoCAD SHX Text O
AutoCAD SHX Text K
AutoCAD SHX Text G
AutoCAD SHX Text R
AutoCAD SHX Text
LST
AutoCAD SHX Text
RST
AutoCAD SHX Text
SST
AutoCAD SHX Text 1.5
AutoCAD SHX Text 2.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 6.0
AutoCAD SHX Text
MV
AutoCAD SHX Text
BF
AutoCAD SHX Text
FS
AutoCAD SHX Text
BP
AutoCAD SHX Text M
AutoCAD SHX Text Valve Number
AutoCAD SHX Text Valve Size
AutoCAD SHX Text Valve Flow
AutoCAD SHX Text Valve Callout
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
SCALE:
AutoCAD SHX Text
DRAWN BY:
AutoCAD SHX Text
CHECKED BY:
AutoCAD SHX Text
DATE:
AutoCAD SHX Text
DATE #
AutoCAD SHX Text
DATE #
AutoCAD SHX Text
PROJECT#:
BK
G
K K
KK
K
K
KK
K
K K K
KK
K
K
K
K
K
KK
K
G
G
K K
K K
KR
R
4"
2"
SS
6.381 1"
64.62 1" 719.5
1"
837.5
2"
12.49 1"
28.510
2"
4"
2"
4"
1"
2" 2"
4" 1"
2"
2"
SS
FIELD VERIFY SUB-STATION LOCATION AND POWER
LOCATION. VERIFY THAT SUB-STATION CONNECTS, VIA
ETHERNET RADIO, TO EXISTING BASELINE 3200 AT
BRIDGMAN HALL.
4" 11
4"
2"
2"2"
K K K
37.511
2"
K
K
4"
4"
4"11
4"
2"
2"
4"
2"2"
2"
49.512
2"
28.913
2"
1418.0
2"
EXISTING
DRIVE
2"
GR
GR
4"
2"
1"
2" 11
4"
156.89 1"
1"
2"
1"
2"
4"
2"
4"
SYMBOL MANUFACTURER/MODEL/DESCRIPTION
HUNTER MP STRIP PROS-04-PRS40-CV
TURF ROTATOR, 4" (10.16 CM) POP-UP WITH FACTORY
INSTALLED CHECK VALVE, PRESSURE REGULATED TO 40
PSI (2.76 BAR), MP ROTATOR NOZZLE ON PRS40 BODY.
LST=IVORY LEFT STRIP, SST=BROWN SIDE STRIP,
RST=COPPER RIGHT STRIP.
HUNTER MP1000 PROS-04-PRS40-CV
TURF ROTATOR, 4" (10.16 CM) POP-UP WITH CHECK
VALVE, PRESSURE REGULATED TO 40 PSI (2.76 BAR), MP
ROTATOR NOZZLE ON PRS40 BODY. M=MAROON ADJ
ARC 90 TO 210, L=LIGHT BLUE 210 TO 270 ARC, O=OLIVE
360 ARC.
HUNTER MP2000 PROS-04-PRS40-CV
TURF ROTATOR, 4" (10.16 CM) POP-UP WITH FACTORY
INSTALLED CHECK VALVE, PRESSURE REGULATED TO 40
PSI (2.76 BAR), MP ROTATOR NOZZLE ON PRS40 BODY.
K=BLACK ADJ ARC 90-210, G=GREEN ADJ ARC 210-270,
R=RED 360 ARC.
HUNTER MP STRIP PROS-12-PRS40-CV
SHRUB ROTATOR, 12" (30.48 CM) POP-UP WITH FACTORY
INSTALLED CHECK VALVE, PRESSURE REGULATED TO 40
PSI (2.76 BAR), MP ROTATOR NOZZLE. LST=IVORY LEFT
STRIP, SST=BROWN SIDE STRIP, RST=COPPER RIGHT
STRIP, ON PRS40 BODY.
HUNTER MP1000 PROS-12-PRS40-CV
SHRUB ROTATOR, 12" (30.48 CM) POP-UP WITH CHECK
VALVE, PRESSURE REGULATED TO 40 PSI (2.76 BAR), MP
ROTATOR NOZZLE. M=MAROON ADJ ARC 90 TO 210,
L=LIGHT BLUE 210 TO 270 ARC, O=OLIVE 360 ARC ON
PRS40 BODY.
HUNTER MP2000 PROS-12-PRS40-CV
SHRUB ROTATOR, 12" (30.48 CM) POP-UP WITH CHECK
VALVE, PRESSURE REGULATED TO 40 PSI (2.76 BAR), MP
ROTATOR NOZZLE. K=BLACK ADJ ARC 90-210, G=GREEN
ADJ ARC 210-270, R=RED 360 ARC ON PRS40 BODY.
HUNTER MP3000 PROS-12-PRS40-CV
SHRUB ROTATOR, 12" (30.48 CM) POP-UP WITH CHECK
VALVE, PRESSURE REGULATED TO 40 PSI (2.76 BAR), MP
ROTARY NOZZLE. B=BLUE ADJ ARC 90-210, Y=YELLOW
ADJ ARC 210-270, A=GRAY 360 ARC ON PRS40 BODY.
SYMBOL MANUFACTURER/MODEL/DESCRIPTION
HUNTER I-20-04
TURF ROTOR, 4.0" POP-UP. ADJUSTABLE AND FULL
CIRCLE. PLASTIC RISER. DRAIN CHECK VALVE.
STANDARD NOZZLE.
HUNTER I-20-04
TURF ROTOR, 4.0" POP-UP. ADJUSTABLE AND FULL
CIRCLE. PLASTIC RISER. DRAIN CHECK VALVE.
STANDARD NOZZLE.
HUNTER I-20-04
TURF ROTOR, 4.0" POP-UP. ADJUSTABLE AND FULL
CIRCLE. PLASTIC RISER. DRAIN CHECK VALVE.
STANDARD NOZZLE.
HUNTER I-20-04
TURF ROTOR, 4.0" POP-UP. ADJUSTABLE AND FULL
CIRCLE. PLASTIC RISER. DRAIN CHECK VALVE.
STANDARD NOZZLE.
SYMBOL MANUFACTURER/MODEL/DESCRIPTION
HUNTER ICV-G
1", 1-1/2", 2", AND 3" PLASTIC ELECTRIC REMOTE
CONTROL VALVES, GLOBE CONFIGURATION, WITH NPT
THREADED INLET/OUTLET, FOR COMMERCIAL/MUNICIPAL
USE.
HUNTER ICV-G 2"
1", 1-1/2", 2", AND 3" PLASTIC ELECTRIC MASTER VALVE,
GLOBE CONFIGURATION, WITH NPT THREADED
INLET/OUTLET, FOR COMMERCIAL/MUNICIPAL USE.
FEBCO 825Y 2"
REDUCED PRESSURE BACKFLOW PREVENTER
BASELINE BL-5315
BISENSOR SOIL MOISTURE SENSOR
BASELINE BL-SUBSTN-X
16 GAUGE, POWDER-COATED CABINET-WALL MOUNT
ENCLOSURE. USE WITH BASELINE 3200 CONTROLLER TO
CONSOLIDATE THE AMOUNT OF CONTROLLERS NEEDED
ON SITE.
FLOWMEC QS200-20
2" INSERTION FLOWMETER, SCHEDULE 80 PVC HOUSING.
0.92-138 GPM RANGE, MAX. OPERATING PRESSURE 150
PSI. 2-WIRE CONNECTOR W/ LED INDICATORS FOR
POWER AND PULSE. STORAGE TEMPS -20 F TO +160 F.
AQUAMARK BOOSTER PUMP
AM60-V
GROUNDING LOCATION
8` GROUND ROD WITH WELDED COPPER LEAD. GROUND
PLATE WITH WELDED LEAD ALSO ACCEPTABLE. ADD
LENGTH/POWER SET TO ACHIEVE 10 OHM`S OR LESS.
INDICATE GROUNDING READINGS ON AS-BUILT
DRAWINGS.
WATER METER 2"
IRRIGATION LATERAL LINE: POLYETHYLENE PIPE SDR-7
IRRIGATION LATERAL LINE: PVC CLASS 200 SDR 21
IRRIGATION MAINLINE: PVC CLASS 200 SDR 21
PIPE SLEEVE: PVC CLASS 200 SDR 21
M O
K G R
B Y A
SS
SS
GR
IRRIGATION SCHEDULE
Generated: 2020-04-02 10:50
P.O.C. NUMBER: 01
Water Source Information:
FLOW AVAILABLE
Water Meter Size: 2" Flow Available: 70.55 gpm
PRESSURE AVAILABLE
Static Pressure at POC: 50.00 psi Elevation Change: 5.00 ft Service Line Size: 2" Length of Service Line: 20.00 ft Booster Pump pressure provided: 40.00 psi Pressure Available: 87.00 psi
DESIGN ANALYSIS
Maximum Multi-valve Flow: 56.00 gpm Flow Available at POC: 70.55 gpm Residual Flow Available: 14.55 gpm
Critical Station: 12 Design Pressure: 45.00 psi Friction Loss: 4.01 psi Fittings Loss: 0.40 psi Elevation Loss: 0.00 psi Loss through Valve: 2.18 psi Pressure Req. at Critical Station: 51.59 psi Loss for Fittings: 0.53 psi Loss for Main Line: 5.28 psi Loss for POC to Valve Elevation: 0.00 psi Loss for Backflow: 12.13 psi Loss for Master Valve: 1.50 psi Loss for Water Meter: 2.38 psi Critical Station Pressure at POC: 73.41 psi Pressure Available: 87.00 psi Residual Pressure Available: 13.59 psi
CRITICAL ANALYSIS
SYMBOL DESCRIPTION
CONNECT TO EXISTING SYSTEM. EXTEND NEW TWO-WIRE PATH
TO EXISTING ZONES AND SUPPLY DECODERS AS REQUIRED FOR
OPERATION - TYPICAL.
UTILIZE BASELINE DECODERS FOR ALL NEW ZONES. CONNECT
TO TWO-WIRE PATH AND TO SUB-STATION AS REQUIRED.
REFERENCE NOTES SCHEDULE
U W
E C
R e si d e n c e H a ll
E au
C la ir e, W is co n si n
P R
O
JE
C T
S H
E E
T T
IT
L
E
SHEET NUMBER
R E
V
IS
IO
N
S
D R
A W
IN
G
S
A S N
O T
E D
M
JC JW
R
952.447.2053 7620 Jennifer Lane
Prior Lake, MN 55372 www.mainlineconsulting.net
IR
R
IG
A
TI
O
N L
A Y
O U
T
IR-2
SCALE:
feet30 60 90
1" = 30'
AutoCAD SHX Text
SS
AutoCAD SHX Text 1.5
AutoCAD SHX Text 1.5
AutoCAD SHX Text 1.5
AutoCAD SHX Text 1.5
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 6.0
AutoCAD SHX Text 6.0
AutoCAD SHX Text 1.5
AutoCAD SHX Text 1.5
AutoCAD SHX Text 1.5
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 1.5
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text M
AutoCAD SHX Text
BF
AutoCAD SHX Text 1.5
AutoCAD SHX Text 1.5
AutoCAD SHX Text 1.5
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 6.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text
MV
AutoCAD SHX Text 1.5
AutoCAD SHX Text 1.5
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 1.5
AutoCAD SHX Text 1.5
AutoCAD SHX Text 1.5
AutoCAD SHX Text 1.5
AutoCAD SHX Text 2.0
AutoCAD SHX Text 2.0
AutoCAD SHX Text 2.0
AutoCAD SHX Text 2.0
AutoCAD SHX Text 2.0
AutoCAD SHX Text 2.0
AutoCAD SHX Text
BP
AutoCAD SHX Text 1.5
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 1.5
AutoCAD SHX Text 1.5
AutoCAD SHX Text 1.5
AutoCAD SHX Text 1.5
AutoCAD SHX Text 1.5
AutoCAD SHX Text 1.5
AutoCAD SHX Text 1.5
AutoCAD SHX Text 1.5
AutoCAD SHX Text 1.5
AutoCAD SHX Text 1.5
AutoCAD SHX Text 1.5
AutoCAD SHX Text 1.5
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text
LST
AutoCAD SHX Text
RST
AutoCAD SHX Text
SST
AutoCAD SHX Text M
AutoCAD SHX Text L
AutoCAD SHX Text O
AutoCAD SHX Text K
AutoCAD SHX Text G
AutoCAD SHX Text R
AutoCAD SHX Text
LST
AutoCAD SHX Text
RST
AutoCAD SHX Text
SST
AutoCAD SHX Text 1.5
AutoCAD SHX Text 2.0
AutoCAD SHX Text 3.0
AutoCAD SHX Text 6.0
AutoCAD SHX Text
MV
AutoCAD SHX Text
BF
AutoCAD SHX Text
FS
AutoCAD SHX Text
BP
AutoCAD SHX Text M
AutoCAD SHX Text Valve Number
AutoCAD SHX Text Valve Size
AutoCAD SHX Text Valve Flow
AutoCAD SHX Text Valve Callout
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
SCALE:
AutoCAD SHX Text
DRAWN BY:
AutoCAD SHX Text
CHECKED BY:
AutoCAD SHX Text
DATE:
AutoCAD SHX Text
DATE #
AutoCAD SHX Text
DATE #
PROJECT#:
U W
E C
R e si d e n c e H a ll
E au
C la ir e, W is co n si n
P R
O
JE
C T
S H
E E
T T
IT
L
E
SHEET NUMBER
R E
V
IS
IO
N
S
D R
A W
IN
G
S
A S N
O T
E D
M
JC JW
R
952.447.2053 7620 Jennifer Lane
Prior Lake, MN 55372 www.mainlineconsulting.net
IR
R
IG
A
TI
O
N D
E
TA
IL
S
IR-3
WALL MOUNT CONTROLLER
1" = 1'-0" 328409.13-01
1 MP40 TURF ROTARY - FLEX PIPE
3" = 1'-0"
MP ROTATOR NOZZLE
328403.13-06
HUNTER MP NOZZLE
HUNTER MP40 12" SPRAY BODY
MP40 12" HIGH-POP SPRAY ROTARY
3" = 1'-0"
328403.29-21
HUNTER ICV
3" = 1'-0"
PAVER VALVE BOX
SUPPORTS - TYP.
ALL VALVES
CARSON VALVE BOX & COVER. ALL
VALVE BOXES SHALL BE
PERMANENTLY LABELED WITH VALVE
ID.
FINISH GRADE
CONTROL WIRES - PROVIDE A
MINIMUM OF 36" OF SLACK @
VALVES
3" MIN. GRAVEL BASE - TYP. ALL VALVES
328406.13-05
BASELINE SOIL MOISTURE SENSOR
1 1/2" = 1'-0"
GRANULAR MATERIAL FOR DRAINAGE -
2" MINIMUM DEPTH
SUPPORT BLOCKS - 2 REQUIRED
WIRE FROM MOISTURE
SENSOR
biSENSOR - SET LENGHT
HORIZONTALLY AND
BLADE IN VERITCAL
POSITION WITH WIRES
OUT OF BOTTOM
2" -3
TURF 6" ROUND
JUNCTION
BOX
6" -8
RED TO RED AND BLACK
TO BLACK IN
WATERPROOF SPLICE
CAP - DBY/R-6
" M
IN
IM
U M
B U
R Y
TW0-WIRE PATH
RED TO RED AND BLACK
TO BLACK IN
WATERPROOF SPLICE
CAP - DBY/R-6
IF MOISTURE SENSOR IS IN LANDSCAPE AREA, VALVE BOX
SHALL BE FLUSH WITH FINISHED GRADE.
ORIENTATE ALL WIRE CONNECTORS VERTICALLY - TYPICAL.
328409.66-07
UNION
POC CONNECTION - METER, BACKFLOW & PUMP STATION
3/4" = 1'-0"
COPPER LINE FROM BUILDING TO LANDSCAPE AREA - BY OTHERS
THRUST BLOCK
AIR GAP DRAIN
PVC SLEEVING (TYP)
FEBCO 825Y-2
WATER METER (2" MIN)
AQUAMARK AM-60V VFD BOOSTER STATION
24"x24"x24"
VALVE BOX WITH EXTERIOR
SHUT OFF VALVE
NOTE: INTERIOR CONNECTION EQUIPMENT BY OTHERS. IRRIGATION
CONTRACTOR TO CONNECT TO STUB AT EXTERIOR OF BUILDING.
328409.73-112
12" WIRE BURY
OR PER LOCAL CODE
11 12
8 FT. MIN. SEPARATION FROM OTHER EQUIPMENT
BL-LA01 LIGHTNING ARRESTOR
1 1/2" = 1'-0"
**GROUND TO 10 OHMS - ADD GROUND ROD/PLATE AS
NEEDED TO REACH GROUNDING REQUIREMENTS**
6" JUNCTION BOX
FINISH GRADE
VALVE BOX AS SPECIFIED
PAIGE GROUNDING
ROD WITH
PRE-WELDED
INSULATED
CONDUCTOR.
INSTALL PER CODE.
BL-LA01 BASELINE LIGHTNING
ARRESTOR
BASELINE BI-CODER - ZIP TIE TO LIP OF VALVE
BOX
GRANULAR DRAINAGE MATERIAL TWO-WIRE PATH
BRICK SUPPORTS - 4
CORNERS
WATERPROOF SPLICE KIT - 3M
DBR/Y-6. APPLY LIQUID
ELECTRICAL TAPE TO WIRE/WIRE
NUT DURING INSTALLATION.
ORIENTATE AND SECURE
VERTICALLY IN VALVE BOX.
PAIGE RE-ENTERABLE
CONNECTOR
328409.79-04
AutoCAD SHX Text
SCALE:
AutoCAD SHX Text
DRAWN BY:
AutoCAD SHX Text
CHECKED BY:
AutoCAD SHX Text
DATE:
AutoCAD SHX Text
DATE #
AutoCAD SHX Text
DATE #
AutoCAD SHX Text
PROJECT#:
AutoCAD SHX Text
PER LOCAL ELECTRICAL
AutoCAD SHX Text
LONG SWEEP ELL.
AutoCAD SHX Text
FINISHED GRADE.
AutoCAD SHX Text
CODES.
AutoCAD SHX Text 18"
AutoCAD SHX Text
SECURELY FASTEN CONTROLLER
AutoCAD SHX Text
CONTROLLER AS SPECIFIED.
AutoCAD SHX Text
OTHERWISE NOTED.
AutoCAD SHX Text
FINISHED GRADE UNLESS
AutoCAD SHX Text
SET CONTROLLER 60" ABOVE
AutoCAD SHX Text
SOURCE. INSTALL AS
AutoCAD SHX Text
110 VAC ELECTRICAL
AutoCAD SHX Text
STEEL CONDUIT FOR
AutoCAD SHX Text
1/2" DIAMETER RIGID
AutoCAD SHX Text
SPECIFICATIONS.
AutoCAD SHX Text
GROUND AS PER MFG.
AutoCAD SHX Text
LOCATION AS SHOWN.
AutoCAD SHX Text
TO EXTERIOR OF BUILDING.
AutoCAD SHX Text
USE PVC SCH. 40
AutoCAD SHX Text
BELOW GRADE.
AutoCAD SHX Text
STEEL CONDUIT FOR
AutoCAD SHX Text
1 1/2" DIAMETER RIGID
AutoCAD SHX Text
RCV WIRES.
AutoCAD SHX Text 6"
AutoCAD SHX Text
WALK.
AutoCAD SHX Text
TO CURB OR
AutoCAD SHX Text
MP40 SPRAY BODY
AutoCAD SHX Text
STREET ELL.
AutoCAD SHX Text
1/2" MARLEX
AutoCAD SHX Text
BARB ELL X MIPT.
AutoCAD SHX Text
12" MINIMUM BELOW GRADE
AutoCAD SHX Text
1/2" MARLEX STREET ELL.
AutoCAD SHX Text
TUBING, 24" MAXIMUM.
AutoCAD SHX Text
1/2" POLYETHYLENE FLEXIBLE
AutoCAD SHX Text
LATERAL LINE.
AutoCAD SHX Text
OR ELL.
AutoCAD SHX Text
PVC TEE (SXSXT)
AutoCAD SHX Text 4"
AutoCAD SHX Text
TO CURB OR
AutoCAD SHX Text
WALK.
AutoCAD SHX Text
DO NOT USE SIDE INLET.
AutoCAD SHX Text
FINISHED GRADE.
AutoCAD SHX Text
2" ABOVE
AutoCAD SHX Text
INSTALL ASSEMBLY
AutoCAD SHX Text
1/2" MARLEX STREET ELL.
AutoCAD SHX Text
LINE.
AutoCAD SHX Text
LATERAL
AutoCAD SHX Text
OR ELL.
AutoCAD SHX Text
PVC TEE (SXSXT)
AutoCAD SHX Text
TUBING, LENGTH AS REQUIRED.
AutoCAD SHX Text
1/2" POLYETHYLENE FLEXIBLE
AutoCAD SHX Text
STREET ELL.
AutoCAD SHX Text
1/2" MARLEX
AutoCAD SHX Text
12" MINIMUM BELOW GRADE
AutoCAD SHX Text
BARB ELL X MIPT.
AutoCAD SHX Text
MAIN LINE
AutoCAD SHX Text
MIN. 4" CLEARANCE
AutoCAD SHX Text
TO SYSTEM
AutoCAD SHX Text
FEBCO
AutoCAD SHX Text
FEBCO
CLASS 200 PVC TO SYSTEM
| Sheets and Views |
| UWEC Residence Hall IRRGDSGN-IR-1 |
| UWEC Residence Hall IRRGDSGN-IR-1 (2) |
| UWEC Residence Hall IRRGDSGN-IR-1 (3) |
File details come from the government source that posted it. Updated .