Updated Required Skid Sprayer Specs~1.docx

Illinois Department of Natural Resources / Illinois Nature Preserves Commission Fire skid specifications 8/13/2025

General Specs:

· Skid must be a maximum of 51” wide x 32” deep

· Hose reel on driver side facing back of vehicle. Engine and pump on passenger side.

· All components chemical resistant and compatible with spraying water-based pesticides.

Tank:

· 50-60 gallon baffled tank with drain plug toward rear of UTV. Tank must fit within dimensions listed above.

· Includes sump to pump all water from tank

· ½” polypropylene integrated tank with fill tower

· Integrated lift handles

· Water level (e.g. sight glass, clear panel, or gauge) located at rear of tank

· Cold weather recirculate connection

· High pressure mounted plumbing

· Inline water strainer/filter

· Do NOT include a foam reservoir

Pump:

· High pressure low volume diaphragm pump

· Max flow: 9.6 gpm

· Max. Pressure: 580psi

· ¾” solid thru-shaft with gear reduction for 5 hp gas engine (minimum horsepower)

· Regulator with pressure gauge and two outlets

Hose, Reel & Nozzle:

· 250ft of 3/8” hose. 1/2” hose acceptable but not preferred. 500 psi burst rated. Abrasion, puncture, and heat resistant. Preferred color yellow or red.

· Hose with crimped swivels on both ends and a quick disconnect for spray nozzle.

· Rear facing electric reel with at least 275ft capacity of 3/8” high pressure hose (or 1/2" hose if used) with four-sided roller guide.

· Hose reel lock

· Electric reel pigtail for direct wire to vehicle

· Pistol style multiple spray pattern nozzle (direct to more open) with matching quick disconnect to hose.

Engine:

· Gas powered

· 4.8 hp (sometimes called 5hp)

· 163 cubic centimeter displacement

· 4 stroke air cooled

· Transistorized magneto ignition

· Recoil or electric start type

· Low oil alert