Tibbo DS1100 Specs.docx
DOCX document 16 KB Posted
- Contract number
- 26-493ISP-ADMIN-P-93107
- Issued by
- Illinois
About this file
This document is a specification sheet for the Tibbo DS1100-SK BASIC-Programmable Serial Controller, a component being procured through a state and local contract award. The specification details the technical requirements and features of the device that is the subject of this procurement action.
The contract covers the procurement of 75 units of the Tibbo DS1100-SK serial controller, a device designed for serial-over-IP and serial control applications. Each unit features a single-channel RS232 port with DB9M connector supporting transmission rates up to 115200 bps, a 10/100BaseT auto-MDIX Ethernet port, and power supply options via power jack or Power-over-Ethernet. The device includes 512KB flash memory for firmware and applications, 2080 bytes of EEPROM storage, and three front-mounted status LEDs. The specification mandates inclusion of DIN rail and wall mounting plates as accessories. The units must be CE and FCC certified with an operating temperature range of -5 to +70 degrees Celsius and support firmware upgrades via serial port or network connection. The specification does not include pricing information, set-asides, option periods, or renewal terms in this document.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Standard Terms and Conditions_~43.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Tibbo DS1100-SK BASIC-Programmable Serial Controller (RS232) Qty. 75
· Serial-over-IP and serial control applications
· Single-channel RS232 port
· Maximum dimensions: 90x48x25mm
· Power supplied via
· Power jack
· Pin9
· D89 (serial port) connector
· Power-over-ethernet board
· Three front-colored LEDs – green, red, and yellow
· 10/100BaseT auto-MDIX Ethernet port
· Single-channel RS232 port on DB9M connector:
· TX, RX, RTS, CTS, DTR, and DSR lines;
· Baudrates of up to 115200bps
· None/even/odd/mark/space parity modes
· 7/8 bits/character modes
· Optional RTS/CTS flow control
· "12V" power input on pin 9 of the DB9
· 512KB flash memory for firmware and application
· 2080 bytes of EEPROM space for data storage
· Must include below accessories
· DIN rail and wall mounting plates
· Operating temperature range: -5 ~ +70°C
· Firmware is upgradeable through the serial port or network
· Tibbo BASIC/C application can be debugged through the Ethernet LAN
· CE- and FCC- certified
File details come from the government source that posted it. Updated .