Tech Specs_Linear Micro.pdf

Rev 06/27/2024

Technical Specifications

Linear Micro-circuit Test System

DLA Product Test Center, Electronics Lab, VTA

I. The contractor shall provide all labor, tools, transportation, supplies, supervision, etc. (except as noted), necessary to provide one (1) new, not refurbished Linear Micro-circuit test system to the Defense Supply Center Columbus (DSCC), DLA Land and Maritime Product Test Center, Columbus, Ohio. The Linear Micro-circuit test system shall meet the following criteria:

A. Linear Micro-circuit tester with the following salient characteristics:

1. The Linear Micro-circuit test system shall represent a unique and flexible mixed signal test platform for measuring a wide range of components

2. The Linear Micro-circuit test system shall be capable of being extended by dozens of test adapters with hundreds of ready-made test programs

3. The Linear Micro-circuit test system shall have the following areas of applications:

a) Component qualification

b) Low volume production testing

c) Laboratory testing

d) Quality control

e) Functional testing

f) Incoming inspection

g) Failure analysis

4. The Linear Micro-circuit test system shall allow for automated testing of electronic components using software that has a graphical user interface (GUI) and the following characteristics and capabilities:

a) Runs on Microsoft Windows 10 Pro

b) Has two modes of operation (Engineer and Operator)

c) Contains debugging tools such as Visual Debugger

d) Makes use of datalogging that can be exported to standard data formats (XLS, CSV, PDF, STDF, etc.)

e) Visualization of measured signals in time domain with virtual instruments

f) Has a customizable GUI

g) Supports customer traceability systems

5. The Linear Micro-circuit test system’s test station and universal front adapter shall include the following:

a) System controller (PC + Win10 Pro, LCD)

b) GUI software

c) Documentation

d) CE Certification

6. The Linear Micro-circuit test system’s test station shall be comprised of the following:

a) Universal front adapter

b) 12 – Channel System Voltmeter Unit

c) DC/RMS/Sampling Measurement Unit

d) 8-Channel Time/ frequency Measurement Unit

e) Programmable Sine Wave Generator capable up to 100 MHz

f) Ramp Generator

g) Programable current Sink/ Source

h) Three programmable Dual Voltage sources capable of 16V/ 200 mA

i) Three fixed Voltage Sources

j) 32 OC Control Bus for test applications

k) 32-bit SIPO

l) Two timing units capable up to 100 MHz

m) 16-bit Parallel Data BUS

n) Calibration unit

o) Trigger board for external synchronization

p) Diagnostic Adapter

q) Free slots for additional instruments

7. The Linear Micro-circuit Test System shall be supplied with the follow test adapters:

a) Family test adapter meant for testing voltage regulators up to 15 A

i. Menu driven Family Software

ii. Socket adapter

iii. Test Program for Positive Regulator (7805 std device)

iv. Test Program for Negative Regulator (7905 std device)

v. Self test adapter

vi. Self test software

b) Family test adapter meant for testing A/D – D/A converters

i. Menu Driven Family Software

ii. GUI Software Development Environment

iii. Configuration Board

iv. Demo test package (Standard device)

v. Self test adapter

vi. Self test software

vii. Documentation

c) Family test adapter meant for testing PWM/ switch mode regulators

i. Self test program

ii. Self test adapter

iii. Documentation

d) Family test adapter meant for testing OpAmps and comparators

i. Menu Driven Family Software

ii. Socket Adapter with DIP test socket

iii. Test program for AD8138 (demo part)

iv. Self test adapter

v. Self test software

vi. Documentation

e) Family test adapter meant for calibration of the system and UFA calibration

i. Calibration adapter

ii. Extension board

iii. Accessories

iv. Calibration program

f) Kelvin matrix 4x8 organization capable of 200V and 500 mA Max

i. 4x8 Kelvin matrix adapter

ii. ST Self-test adapter

iii. Software library

B. Other requirements:

1. Minimum warranty: Parts and workmanship: One (1) Years Standard Warranty from date of installation at the DLA Product Test Center, Electronics Lab, Columbus, OH

2. Quoted Linear Micro-circuit test system shall have been on the market in the USA for a minimum of 1 year.

3. The contractor shall have a means to preforming system repairs if needed.

4. On-site training by factory representatives (estimated 2-3 days) shall be at the DLA

Land and Maritime Product Test Center location, Columbus, OH.

5. All training materials shall be supplied by the contractor.

6. The contractor shall be responsible for installation and start up, which consists of 1) turn system on, 2) run diagnostics, and verify system operation, 3) demonstrate to

PTC personnel the system meets specifications.

7. Contractor must furnish the GBR files and associated documentation needed for the rapid in-house creation of the needed socket adapters. We are a government test facility that has short suspense times and a wide variety of parts subject to testing.

8. Cost for shipping must be included.

9. Delivery: 120 Days from Contract Award Date.

10. Cost for initial calibration documentation must be included.

11. Contractor shall contact Jeremiah Jones (614-692-8955, Jeremiah.L.Jones@dla.mil) or Kyle Palmer (614-692-8860, kyle.palmer@dla.mil) to schedule the delivery.

12. The system shall be delivered to:

Defense Supply Center Columbus (DSCC)

300 North James Road, Bldg 17-3

Mark For: DLA Product Test Center, Building 11-7 (VTA Lab)

Attn: Jeremiah Jones (614-692-8955; Jeremiah.L.Jones@dla.mil) or

Kyle Palmer (614-692-8860, kyle.palmer@dla.mil)

Columbus, Ohio 43218-3990

13. Payment of invoices will be accomplished by payment through the Defense Finance and Accounting Service. Invoices will be submitted to the Wide Area Workflow system in accordance with DFARS 252.232-7003 Electronic Submission of Payment

Requests and Receiving Reports and DFARS 252.232-7006 Wide Area Workflow

Payment Instructions within 10 workdays after the conclusion of work performed.

Invoices shall be submitted through Wide Area Workflow (WAWF), See DFARS

Clause 252.232-7006 Wide Area Workflow Payment Instructions for detailed instructions on how to submit invoices.

14. DODAAC: SL0700