TAB 32 SOW.pdf

This is a Statement of Work (SOW) for U.S. Coast Guard contract PR# 6008-CD04 requiring overhaul services on a Starter Generator (Part Number G4085-1000, NSN 2925-01-HS3-3357). The contractor must be an Original Equipment Manufacturer (OEM), an OEM Authorized Repair Center, or a FAA-certified 145 Repair Center acceptable to the Coast Guard. Four units are required, with optional quantities of three additional units. The contractor shall comply with OEM specifications, Component Maintenance Manuals (CMM), drawings, Service Bulletins, Overhaul and Repair Instructions, and must maintain ISO 9000 compliance or equivalent quality systems.

The SOW specifies comprehensive repair and overhaul procedures including complete teardown, inspection, cleaning, replacement of consumables and degraded components, and functional testing in accordance with OEM publications. The required turn-around time is 90 days after receipt of material, with earlier delivery preferred if no additional charges apply. All components must be thoroughly cleaned to remove hazardous materials, tested for airworthiness, and accompanied by FAA airworthiness release certificates (8130-3 or EASA Form-1). Contractors must provide Teardown and Inspection Reports within five calendar days of inspection, detailing part numbers, nomenclature, labor hours, and repair costs. Components must be packaged according to CMM standards with proper labeling including NSN, Part Number, Serial Number, and other tracking information, and must comply with ANSI/ESD S541 or MIL-STD-2073 standards for electrostatic discharge sensitive components. Final inspection and acceptance will be performed by Aviation Logistics Center quality assurance personnel.