T2187 24DPP00960 Revised Bid Solicitation 3.1.24.docx
DOCX document 254 KB Posted
- Attached to
- Contract RFP/NJCOOP NJ|24-FLEET-123249
- Contract number
- 24-FLEET-123249
- Issued by
- New Jersey
About this file
This document is a Bid Solicitation (No. 24DPP00960) issued by the New Jersey Department of the Treasury, Division of Purchase and Property, on behalf of various State Using Agencies and Intrastate Cooperative Purchasing Participants. The procurement is conducted through the State of New Jersey's eProcurement system, NJSTART, and is open to potential contractors who can provide parts and repair services for lawn and grounds maintenance equipment across the state's North, Central, and South regions.
The bid solicitation covers Original Equipment Manufacturer (OEM) and non-OEM parts and repairs for eight equipment categories, including brush chippers, chain saws, generators, loaders, mowers, small engines, tractors, and trimmers. The contract encompasses 128 price lines representing various brands like John Deere, Case, Stihl, and others. Bidders can quote on individual or multiple categories, with pricing structured as percentage discounts/markups on parts and fixed hourly rates for repairs. The contract term is three years with potential extensions up to three additional years. There are no small business or disabled veteran set-asides, and the state makes no guarantees of minimum purchase volumes. Contractors will be required to submit quarterly sales reports and pay a 1% Procurement Efficiency Program Fee on all purchases.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Bid Solicitation #
24DPP00960
T2187 OEM and Non-OEM Parts and Repairs for Lawn and Grounds Maintenance Equipment
| Date |
| Time |
Due Date For Electronic Questions Refer to Bid Solicitation Section 2.1 for more information.
| February 13, 2024 |
| 2:00 PM |
Mandatory/Optional Pre-Quote Conference Refer to Bid Solicitation Section 2.5 for more information.
Not Applicable to this Procurement.
Mandatory/Optional Site Visit Refer to Bid Solicitation Section 2.4 for more information.
Not Applicable to this Procurement.
Quote Opening Date Refer to Bid Solicitation Section 3 for more information.
February 27, 2024 February 29, 2024 March 19, 2024 March 28, 2024
2:00 PM
Dates are subject to change. All times contained in the Bid Solicitation refer to Eastern Time.
All changes will be reflected in Bid Amendments to the Bid Solicitation posted on www.njstart.gov.
SET-ASIDES
Small Business Set-Aside For Goods and Services:
☐ I ☐ II ☐ III
For Construction:
☐ IV ☐ V ☐ VI
☒ Not Applicable ☐ Entire Contract ☐ Partial Contract ☐ Subcontracting Only ☐ Preference
| Disabled Veteran-Owned Business Set-Aside |
| ☒ Not Applicable |
☐ Entire Contract ☐ Partial Contract ☐ Subcontracting Only ☐ Preference
Bid Solicitation Issued By:
State of New Jersey Department of the Treasury Division of Purchase and Property Trenton, New Jersey 08625‑0230 On Behalf of:
State of New Jersey Using Agencies Cooperative Purchasing Participants
Date: 2/26/20243/1/2024
TABLE OF CONTENTS
| 1 | INTRODUCTION AND SUMMARY OF THE BID SOLICITATION | 4 |
| 1.1 | PURPOSE AND INTENT | 4 |
| 1.2 | BACKGROUND | 8 |
| 1.3 | CONTRACT AMOUNT | 8 |
| 1.4 | ORDER OF PRECEDENCE OF CONTRACTUAL TERMS | 8 |
| 1.5 | INTRASTATE COOPERATIVE PURCHASING | 8 |
| 2 | PRE-QUOTE SUBMISSION INFORMATION | 9 |
| 2.1 | ELECTRONIC QUESTION AND ANSWER PERIOD | 9 |
| 2.2 | EXCEPTIONS TO THE STATE OF NJ STANDARD TERMS AND CONDITIONS (SSTC) | 9 |
| 2.3 | BID AMENDMENTS | 9 |
| 2.4 | MANDATORY/OPTIONAL SITE VISIT | 9 |
| 2.5 | MANDATORY/OPTIONAL PRE-QUOTE CONFERENCE | 9 |
| 2.6 | PRE-QUOTE DOCUMENT REVIEW | 9 |
| 3 | QUOTE SUBMISSION REQUIREMENTS | 9 |
| 3.1 | QUOTE SUBMISSION | 9 |
| 3.2 | BIDDER RESPONSIBILITY | 10 |
| 3.3 | ANNOUNCEMENT OF QUOTE INFORMATION | 10 |
| 3.4 | QUOTE ERRORS | 10 |
| 3.5 | QUOTE WITHDRAWAL PRIOR TO QUOTE OPENING | 10 |
| 3.6 | QUOTE WITHDRAWAL AFTER QUOTE OPENING, BUT PRIOR TO CONTRACT AWARD | 10 |
| 3.7 | JOINT VENTURE | 10 |
| 3.8 | SMALL BUSINESS SET-ASIDE CONTRACTS | 10 |
| 3.9 | DISABLED VETERANS’ BUSINESS SET-ASIDE CONTRACT | 11 |
| 3.10 | BID SECURITY | 11 |
| 3.11 | BIDDER ADDITIONAL TERMS SUBMITTED WITH THE QUOTE | 11 |
| 3.12 | QUOTE CONTENT | 11 |
| 3.13 | FORMS, REGISTRATIONS AND CERTIFICATIONS TO BE SUBMITTED WITH QUOTE | 11 |
| 3.13.1 | OFFER AND ACCEPTANCE PAGE | 11 |
| 3.13.2 | OWNERSHIP DISCLOSURE FORM | 11 |
| 3.13.3 | DISCLOSURE OF INVESTMENT ACTIVITIES IN IRAN FORM | 12 |
| 3.13.4 | DISCLOSURE OF INVESTIGATIONS AND OTHER ACTIONS INVOLVING BIDDER FORM | 12 |
| 3.13.5 | MACBRIDE PRINCIPLES FORM | 12 |
| 3.13.6 | SERVICE PERFORMANCE WITHIN THE UNITED STATES | 12 |
| 3.13.7 | CONFIDENTIALITY/COMMITMENT TO DEFEND | 12 |
| 3.13.8 | SUBCONTRACTOR UTILIZATION PLAN | 13 |
| 3.13.9 | RESERVED | 13 |
| 3.13.10 | AFFIRMATIVE ACTION | 13 |
| 3.13.11 | RESERVEd | 13 |
| 3.13.12 | STATE OF NEW JERSEY SECURITY DUE DILIGENCE THIRD-PARTY INFORMATION SECURITY QUESTIONNAIRE | 13 |
| 3.13.13 | BUSINESS REGISTRATION | 13 |
| 3.13.14 | Certification of Non-Involvement in Prohibited Activities in Russia or Belarus Pursuant to P.L.2022, c.3 | 14 |
| 3.14 | TECHNICAL QUOTE | 14 |
| 3.15 | BIDDER QUOTE OVERVIEW FORM | 14 |
| 3.16 | BIDDER DATA SHEET/FORM | 14 |
| 3.17 | AFFIDAVIT OF APPAREL PRODUCTION | 14 |
| 3.18 | DISCLOSURE OF PRODUCT COMPOSITION | 14 |
| 3.19 | SPECIFICATION DATA SHEETS | 14 |
| 3.20 | SAMPLES AND TESTING | 14 |
| 3.21 | SPECIFICATION CONFORMANCE FORM | 14 |
| 3.22 | MANUFACTURER’S CERTIFICATION | 15 |
| 3.23 | MANUFACTURER’S PUBLISHED LIST OF OPTIONS AND ATTACHEMENTS/PRICE LIST | 15 |
| 3.24 | PRICE LIST AND/OR CATALOG | 15 |
| 3.25 | MANAGEMENT OVERVIEW | 15 |
| 3.26 | CONTRACT MANAGEMENT | 15 |
| 3.27 | CONTRACT SCHEDULE | 15 |
| 3.28 | MOBILIZATION PLAN | 15 |
| 3.29 | ADDITIONAL PLAN(S) | 16 |
| 3.30 | ORGANIZATIONAL EXPERIENCE | 16 |
| 3.31 | LOCATION | 16 |
| 3.32 | ORGANIZATION CHARTS | 16 |
| 3.33 | RESUMES | 16 |
| 3.34 | EXPERIENCE WITH CONTRACTS OF SIMILAR SIZE AND SCOPE | 16 |
| 3.35 | FINANCIAL CAPABILITY OF THE BIDDER | 16 |
| 3.36 | STATE-SUPPLIED PRICE SHEET INSTRUCTIONS | 16 |
| 3.36.1 | DELIVERY TIME AND COSTS | 22 |
| 3.36.2 | CASH DISCOUNTS | 22 |
| 3.36.3 | VOLUME DISCOUNTS | 22 |
| 3.36.4 | USE OF “NO BID” ON THE STATE-SUPPLIED PRICE SHEET | 22 |
| 3.37 | ORAL PRESENTATIONS | 22 |
| 4 | SCOPE OF WORK | 23 |
| 4.1 | OEM/ NON-OEM PARTS AND REPAIRS ITEMS METHODOLOGY | 23 |
| 4.2 | GUARANTEE/WARRANTY | 26 |
| 4.3 | DELIVERY | 26 |
| 4.3.1 | EMERGENCY DELIVERIES, RESTOCKING FEES AND RETURN SHIPPING CHARGES | 27 |
| 4.4 | REGIONAL JURISDICTION | 27 |
| 4.5 | CONTRACT ORDERING / MINI-BID PROCESS | 27 |
| 4.6 | RESERVED. | 28 |
| 4.7 | PRICE LIST UPDATES | 28 |
| 5 | GENERAL CONTRACT TERMS | 29 |
| 5.1 | CONTRACT TERM AND EXTENSION OPTION | 29 |
| 5.2 | CONTRACT TRANSITION | 29 |
| 5.3 | PERFORMANCE SECURITY | 29 |
| 5.4 | OWNERSHIP OF MATERIAL | 29 |
| 5.5 | SUBSTITUTION OF STAFF | 29 |
| 5.6 | DELIVERY TIME AND COSTS | 29 |
| 5.7 | AUTHORIZED DEALER AND/OR DISTRIBUTORS | 29 |
| 5.8 | LIQUIDATED DAMAGES | 30 |
| 5.8.1 | NOTIFICATION OF LIQUIDATED DAMAGES | 30 |
| 5.8.2 | CONDITIONS FOR TERMINATION OF LIQUIDATED DAMAGES | 30 |
| 5.8.3 | SEVERABILITY OF INDIVIDUAL LIQUIDATED DAMAGES | 30 |
| 5.8.4 | WAIVER OF LIQUIDATED DAMAGES/LIQUIDATED DAMAGES NOT EXCLUSIVE REMEDY | 30 |
| 5.8.5 | PAYMENT OF LIQUIDATED DAMAGES | 30 |
| 5.9 | RETAINAGE | 30 |
| 5.10 | ELECTRONIC PAYMENTS | 30 |
| 5.11 | PROCUREMENT EFFICIENCY PROGRAM | 30 |
| 6 | DATA SECURITY REQUIREMENTS – CONTRACTOR RESPONSIBILITY | 31 |
| 7 | MODIFICATIONS TO THE STATE OF NEW JERSEY STANDARD TERMS AND CONDITIONS | 31 |
| 8 | QUOTE EVALUATION AND AWARD | 31 |
| 8.1 | RIGHT TO WAIVE | 31 |
| 8.2 | DIRECTOR’S RIGHT TO ACCEPT OR REJECT A QUOTE | 32 |
| 8.3 | RECIPROCITY FOR JURISDICTIONAL BIDDER PREFERENCE | 32 |
| 8.4 | CLARIFICATION OF QUOTE | 32 |
| 8.5 | ORAL PRESENTATION | 32 |
| 8.6 | TIE QUOTES | 32 |
| 8.7 | STATE'S RIGHT TO INSPECT BIDDER’S FACILITIES | 32 |
| 8.8 | STATE'S RIGHT TO CHECK REFERENCES | 32 |
| 8.9 | EVALUATION CRITERIA | 32 |
| 8.9.1 | TECHNICAL EVALUATION CRITERIA | 32 |
| 8.9.2 | PRICE EVALUATION | 32 |
| 8.10 | QUOTE DISCREPANCIES | 33 |
| 8.11 | NEGOTIATION | 33 |
| 8.12 | BEST AND FINAL OFFER (BAFO) | 33 |
| 8.13 | “REQUEST FOR REVISION” WITHIN NJSTART | 33 |
| 8.14 | POOR PERFORMANCE | 33 |
| 8.15 | RECOMMENDATION FOR AWARD | 34 |
| 8.16 | CONTRACT AWARD | 34 |
| 9 | GLOSSARY | 35 |
| 9.1 | CROSSWALK | 35 |
| 9.2 | DEFINITIONS | 35 |
| 9.3 | CONTRACT-SPECIFIC DEFINITIONS | 40 |
ATTACHMENT 1 – State of New Jersey Standard Terms and Conditions (2/8/2024) ATTACHMENT 2 – Standard Procurement Forms Packet ATTACHMENT 3 – Bidder Data Sheet/Form ATTACHMENT 4 – Specification Conformance Form
INTRODUCTION AND SUMMARY OF THE BID SOLICITATION
This Bid Solicitation is issued by the Department of the Treasury, Division of Purchase and Property (Division), Procurement Bureau, on behalf of various State Using Agencies. Quotes submitted in response to this Bid Solicitation shall be through the State of New Jersey’s eProcurement system, NJSTART. Bidders are advised to thoroughly read all sections of this Bid Solicitation and follow all instructions.
Bidders are strongly encouraged to visit the NJSTART Vendor Support Page, which contains Quick Reference Guides (QRGs), supporting videos, a glossary of NJSTART terms, and helpdesk contact information. Bidders should utilize the QRGs before attempting to submit a Quote through NJSTART. It is the Bidder’s responsibility to ensure that the Quote and attachments have been properly submitted. Inquiries concerning the use of NJSTART may be directed to njstart@treas.nj.gov. The Division will not respond to substantive questions related to the Bid Solicitation or any other Contract via this email address.
PURPOSE AND INTENT
The purpose of this Bid Solicitation is to solicit Quotes for Original Equipment Manufacturer (OEM) and non-OEM parts and repairs for lawn and grounds maintenance equipment.
It is the intent of the State to award Contracts to those responsible Bidders whose Quotes, conforming to this Bid Solicitation are most advantageous to the State of New Jersey (State), price and other factors considered. The State may award any or all price lines. The State, however, reserves the right to separately procure individual requirements that are the subject of the Contract during the Contract term, when deemed by the Director of the Division (Director) to be in the State’s best interest.
This Bid Solicitation covers both OEM and non-OEM parts and repairs for the brands of lawn and grounds maintenance equipment listed below. This list of brands is based on the current inventory of lawn and grounds maintenance equipment currently utilized by a vast majority of State Using Agencies. There are eight (8) categories of lawn and grounds maintenance equipment, which are represented by 128 price lines, in three regions - North, Central and South, as follows:
| BRAND/DESCRIPTION |
| GROUP NUMBER |
| PRICE LINE NUMBER |
CATEGORY 1: BRUSH CHIPPERS (GROUPS 1 - 5, PRICE LINES 1 - 8)
| Brush Bandit OEM parts and repairs |
| 1 |
| 1 - 2 |
| Foremost OEM parts and repairs |
| 2 |
| 3 - 4 |
| Morbark OEM parts and repairs |
| 3 |
| 5 - 6 |
| Non-OEM parts |
| 4 |
| 7 |
| Repairs by a non-OEM dealer |
| 5 |
| 8 |
CATEGORY 2: CHAIN SAWS (GROUPS 6 - 10, PRICE LINES 9 - 16)
| Echo OEM parts and repairs |
| 6 |
| 9 - 10 |
| Homelite OEM parts and repairs |
| 7 |
| 11 – 12 |
| Stihl OEM parts and repairs |
| 8 |
| 13 – 14 |
| Non-OEM parts |
| 9 |
| 15 |
| Repairs by a non-OEM dealer |
| 10 |
| 16 |
CATEGORY 3: GENERATORS (GROUPS 11 - 16, PRICE LINES 17 - 26)
| Generac OEM parts and repairs |
| 11 |
| 17 – 18 |
| Homelite OEM parts and repairs |
| 12 |
| 19 – 20 |
| Honda OEM parts and repairs |
| 13 |
| 21 – 22 |
| Onan OEM parts and repairs |
| 14 |
| 23 – 24 |
| Non-OEM parts |
| 15 |
| 25 |
| BRAND/DESCRIPTION |
| GROUP NUMBER |
| PRICE LINE NUMBER |
| Repairs by a non-OEM dealer |
| 16 |
| 26 |
CATEGORY 4: LOADERS (GROUPS 17 - 26, PRICE LINES 27 - 44)
| Case OEM parts and repairs |
| 17 |
| 27 – 28 |
| Fiat Allis OEM parts and repairs |
| 18 |
| 29 – 30 |
| Ford OEM parts and repairs |
| 19 |
| 31 – 32 |
| JCB OEM parts and repairs |
| 20 |
| 33 – 34 |
| John Deere OEM parts and repairs |
| 21 |
| 35 – 36 |
| New Holland OEM parts and repairs |
| 22 |
| 37 – 38 |
| Terex OEM parts and repairs |
| 23 |
| 39 – 40 |
| Volvo OEM parts and repairs |
| 24 |
| 41 – 42 |
| Non-OEM parts |
| 25 |
| 43 |
| Repairs by a non-OEM dealer |
| 26 |
| 44 |
CATEGORY 5: MOWERS (GROUPS 27 - 50, PRICE LINES 45 - 90)
| Alamo OEM parts and repairs |
| 27 |
| 45 – 46 |
| Alamo/Terrain King OEM parts and repairs |
| 28 |
| 47 – 48 |
| Billy Goat OEM parts and repairs |
| 29 |
| 49 – 50 |
| Bunton OEM parts and repairs |
| 30 |
| 51 – 52 |
| Bush Hog LLC OEM part and repairs |
| 31 |
| 53 – 54 |
| Diamond Mowers OEM parts and repairs |
| 32 |
| 55 – 56 |
| Exmark OEM parts and repairs |
| 33 |
| 57 – 58 |
| Ford/New Holland OEM parts and repairs |
| 34 |
| 59 – 60 |
| Giant OEM parts and repairs |
| 35 |
| 61 – 62 |
| Gravely OEM parts and repairs |
| 36 |
| 63 – 64 |
| Green Climber OEM part and repairs |
| 37 |
| 65 – 66 |
| Jacobsen OEM parts and repairs |
| 38 |
| 67 – 68 |
| John Deere OEM parts and repairs |
| 39 |
| 69 – 70 |
| Land Pride OEM parts and repairs |
| 40 |
| 71 – 72 |
| Lawn Boy OEM parts and repairs |
| 41 |
| 73 – 74 |
| Mott/Alamo OEM parts and repairs |
| 42 |
| 75 – 76 |
| New Holland OEM parts and repairs |
| 43 |
| 77 – 78 |
| Ransome OEM parts and repairs |
| 44 |
| 79 – 80 |
| Schulte Industries OEM parts and repairs |
| 45 |
| 81 – 82 |
| Tiger OEM parts and repairs |
| 46 |
| 83 – 84 |
| Toro OEM parts and repairs |
| 47 |
| 85 – 86 |
| White OEM parts and repairs |
| 48 |
| 87 – 88 |
| Non-OEM parts |
| 49 |
| 89 |
| Repairs by a non-OEM dealer |
| 50 |
| 90 |
| BRAND/DESCRIPTION |
| GROUP NUMBER |
| PRICE LINE NUMBER |
CATEGORY 6: SMALL ENGINES (GROUPS 51 - 58, PRICE LINES 91 – 104)
| Briggs & Stratton OEM parts and repairs |
| 51 |
| 91 – 92 |
| Honda OEM parts and repairs |
| 52 |
| 93 – 94 |
| Kawasaki OEM parts and repairs |
| 53 |
| 95 – 96 |
| Kohler OEM parts and repairs |
| 54 |
| 97 – 98 |
| Onan OEM parts and repairs |
| 55 |
| 99 – 100 |
| Tecumseh OEM parts and repairs |
| 56 |
| 101 – 102 |
| Non-OEM parts |
| 57 |
| 103 |
| Repairs by a non-OEM dealer |
| 58 |
| 104 |
CATEGORY 7: TRACTORS (GROUPS 59 - 67, PRICE LINES 105 - 120)
| Case OEM parts and repairs |
| 59 |
| 105 – 106 |
| Ford OEM parts and repairs |
| 60 |
| 107 – 108 |
| John Deere OEM parts and repairs |
| 61 |
| 109 – 110 |
| Kubota OEM parts and repairs |
| 62 |
| 111 – 112 |
| Massey Ferguson OEM parts and repairs |
| 63 |
| 113 – 114 |
| New Holland OEM parts and repairs |
| 64 |
| 115 - 116 |
| Ventrac OEM parts and repairs |
| 65 |
| 117 - 118 |
| Non-OEM parts |
| 66 |
| 119 |
| Repairs by a non-OEM dealer |
| 67 |
| 120 |
CATEGORY 8: TRIMMERS (STRING, HEDGE & PRUNERS, GROUPS 68 - 72, PRICE LINES 121 - 128)
| Echo OEM parts and repairs |
| 68 |
| 121 – 122 |
| Homelite OEM parts and repairs |
| 69 |
| 123 – 124 |
| Stihl OEM parts and repairs |
| 70 |
| 125 – 126 |
| Non-OEM parts |
| 71 |
| 127 |
| Repairs by a non-OEM dealer |
| 72 |
| 128 |
AGENCY-USE NET LINES
Price Line 129 is an Agency-use net price line for parts installed in a repair provided by a non-OEM dealer.
This price line will be added to all Bidders’ that are awarded a Contract for non-OEM repairs as a result of this Bid Solicitation.
Note: Bidders shall not bid on this price line.
Price Line 130 is an Agency-use net price line for the Contractor’s hauling of equipment for repair from the Using Agency location to the Contractor’s repair facility and the return delivery of the repaired equipment back to the Using Agency’s location. This cost would be a one-way delivery fee to and from the Using Agency location to the Contractor’s repair facility. All costs must be by mutual agreement between the Using Agency and the Contractor.
Price Line 131 is an Agency-use net price line for expedited delivery charges, restocking fees or return shipping charges only.
OEM Parts and Repairs Price Lines:
Each brand of lawn and grounds maintenance equipment constitutes one (1) OEM group and includes two (2) price line items, one for OEM parts and the other for OEM repairs. Bidders must bid on both price lines within the group in order for its Quote to be considered responsive for the group.
A Bidder may bid on a single category/group or multiple categories/groups. Bidders are not required to bid on all categories/groups in order to be considered responsive.
The State intends to award a Contract to each responsive Bidder that submits a Quote that meets the category and requirements of the Bid Solicitation in accordance with Bid Solicitation Sections 8.9.1 and 8.9.2.
Non-OEM Parts and Repairs Price Lines:
In addition to the OEM parts and repairs groups in a category, there are also two (2) non-OEM groups in each of the 8 categories of lawn and grounds maintenance equipment, one for non-OEM parts and the other for non-OEM repairs. Bidders may bid on both the non-OEM parts price line and the non-OEM repairs price line or may bid solely on the non-OEM parts price line only or solely on the non-OEM repairs price line only. Bidders are not required to bid on both non-OEM parts and non-OEM repairs price lines in order for their Quote to be considered responsive.
The State intends to award a Contract to each responsive Bidder that submits a Quote that meets the category and requirements of the Bid Solicitation in accordance with Bid Solicitation Sections 8.9.1 and 8.9.2.
Agency-Use Net Price Line (Price Line 129):
An Agency-Use Price Line (Price Line 129) will be added to all Contractors’ Contracts to allow for the Using Agency payment of net pricing of pre-authorized parts installed in a non-OEM repair for any of the 8 categories of equipment. This price line shall not be used for parts only purchases. If a non-OEM repairs Contractor holds the Contract for both price line 129 item and the non-OEM parts line in a category, then Contract users shall use the Contract line that provides the best pricing for parts installed in a non-OEM repair.
Agency-Use Net Price Line (Price Line 130):
An Agency-Use Price Line (Price Line 130) will be added to all Contractors’ Contracts. This net price line is for the Using Agency payment of pricing involved in the hauling of equipment for repair from the Using Agency location to the Contractor’s repair facility and the return delivery of the repaired equipment back to the Using Agency’s location. This cost would be a one-way delivery fee to and from the Using Agency location to the Contractor’s repair facility. All costs must be by mutual agreement between the Using Agency and the Contractor.
Agency-Use Net Price Line (Price Line 131):
An Agency-Use Price Line (Price Line 131) will be added to all Contractors’ Contracts. This net price line is for the Using Agency payment of expedited delivery charges, restocking fees or return shipping charges only.
The State makes no representation and provides no guarantee as to the minimum, average or maximum volume of purchases to be made under this Contract.
This procurement is not a Small Business or Disabled Veteran-Owned Business set aside procurement.
The State of New Jersey Standard Terms and Conditions (SSTCs) included with this Bid Solicitation will apply to all Contracts made with the State. These terms are in addition to the terms and conditions set forth in this Bid Solicitation and should be read in conjunction with them unless the Bid Solicitation specifically indicates otherwise.
BACKGROUND
This is a reprocurement of the products/services under T2187 Parts and Repairs for Lawn and Grounds Equipment contract. Bidders interested in reviewing the current Contract specifications and pricing information may do so by following the instruction below. Bidders should not rely upon or use data or information from the contract when preparing a response to this Bid Solicitation as this Bid Solicitation addresses the State’s current requirements.
· Go to: www.njstart.gov
· Select “Active Blankets”
· In the search bar, select “Blankets” from the drop down menu
· Enter the T2187 and click “”
· The current Contract list will appear under “Results”
CONTRACT AMOUNT
The estimated amount of the Contract, if stated, shall not be construed as either the maximum or minimum amount which the State shall be obliged to order.
ORDER OF PRECEDENCE OF CONTRACTUAL TERMS
The Contract awarded, and the entire agreement between the parties, as a result of this Bid Solicitation shall consist of: (1) the final Bid Solicitation, (2) the State of New Jersey Standard Terms and Conditions, (3) the Quote, and if applicable (4) any Bidder responses to clarifications; (5) a Bidder’s Best and Final Offer, (6) other negotiated document, and/or (7) third party document. In the event of a conflict in the terms and conditions among the documents comprising this Contract, the order of precedence, for purposes of interpretation thereof, listed from highest ranking to lowest ranking as noted above.
Any other terms or conditions, not included with the Bidder’s Quote and accepted by the State, shall not be incorporated into the Contract awarded. Any references to external documentation, including those documents referenced by a URL, including without limitation, technical reference manuals, technical support policies, copyright notices, additional license terms, etc., are subject to the terms and conditions of the Bid Solicitation and the State of New Jersey Standard Terms and Conditions. In the event of any conflict between the terms of a document incorporated by reference, the terms and conditions of the Bid Solicitation and the State of New Jersey Standard Terms and Conditions shall prevail.
INTRASTATE COOPERATIVE PURCHASING
The State intends to extend the Contracts awarded to the State's Intrastate Cooperative Purchasing Participants. Although the State is making the use of any Contract resulting from this Bid Solicitation available to Intrastate Cooperative Purchasing Participants, the State makes no representation as to the acceptability of the Bid Solicitation’s terms and conditions to any Intrastate Cooperative Purchasing Participants.
PRE-QUOTE SUBMISSION INFORMATION
The Bidder assumes sole responsibility for the complete effort required in submitting a Quote and for reviewing the Quote submission requirements and the Scope of Work requirements.
ELECTRONIC QUESTION AND ANSWER PERIOD
The Division will electronically accept questions and inquiries from all potential Bidders via the “Q&A” Tab of the Bid Solicitation in NJSTART. Questions should be directly tied to a Bid Solicitation Section, the Price Sheet, Form or Attachment; and should reference the specific Bid Solicitation Section or document to which it relates.
The cut-off date for electronic questions and inquiries relating to this Bid Solicitation is indicated on the Bid Solicitation cover page. In the event that questions are posed by Bidders, answers to such questions will be issued by Bid Amendment.
A Bidder shall not contact the Using Agency and/or the Procurement Specialist directly, in person, by telephone or by e-mail, concerning this Bid Solicitation, prior to Contract award.
EXCEPTIONS TO THE STATE OF NJ STANDARD TERMS AND CONDITIONS (SSTC)
Questions regarding the State of New Jersey Standard Terms and Conditions and exceptions to mandatory requirements MUST be posed during the Electronic Question and Answer period and shall contain the Bidder’s suggested changes and the reason(s) for the suggested change(s).
BID AMENDMENTS
In the event that it becomes necessary to clarify or revise this Bid Solicitation, such clarification or revision will be by Bid Amendment. Any Bid Amendment will become part of this Bid Solicitation and part of any Contract awarded. Bid Amendments will be posted as a file attachment on the “Summary” page of the Bid Solicitation in NJSTART after the cut-off date.
There are no designated dates for release of Bid Amendments. Those Bidders who are on the bid holder list either through commodity code registration in NJSTART or by acknowledging the bid in NJSTART should receive notification of any Bid Amendment(s). If a Bidder is not on the bid holder list, Bid Amendments are still viewable on the “Summary” page of the Bid Solicitation in NJSTART.
It is the sole responsibility of the Bidder to be knowledgeable of all Bid Amendments related to this procurement. An interested Bidder should check the NJSTART “Open Bids” Tab on a daily basis to ensure review of the most updated information.
MANDATORY/OPTIONAL SITE VISIT
Not applicable to this procurement.
MANDATORY/OPTIONAL PRE-QUOTE CONFERENCE
Not applicable to this procurement.
PRE-QUOTE DOCUMENT REVIEW
Not applicable to this procurement.
QUOTE SUBMISSION REQUIREMENTS
QUOTE SUBMISSION
In order to be considered for award, the Quote must be received electronically by the Division’s Proposal Review Unit, through NJSTART, by the required date and time.
The date and time of the Quote opening are indicated on the Bid Solicitation cover sheet and on the “Summary” Tab of the Bid Solicitation webpage within NJSTART. If the Quote opening deadline has been revised, the new Quote opening deadline will be shown on the posted Bid Amendment and on the “Summary” Tab of the Bid Solicitation webpage within NJSTART. Quotes not received prior to the Quote opening deadline shall be rejected.
Quotes will be publicly opened and announced by telephone conference on the date and time of the quote opening.
(Dial-in phone number: 888-204-5984 / Access code: 2602305)
When submitting a Quote through NJSTART, do not use any symbols (i.e., #, @, $, &, *) in the filename as this may prevent the Quote from being properly uploaded. Uploaded files must be compatible with Microsoft Office and/or Adobe software applications. DO NOT UPLOAD files with extensions such as .zip, .numbers, or .pages.
When uploading the documents to NJSTART, the Bidder should select the “Confidential” option in NJSTART for attachments on the “Attachments” Tab to request that the documents not be displayed publicly through NJSTART. Marking an attachment as "Confidential" in NJSTART shall not constitute the Bidder's designation of the attachment as exempt from public disclosure under the New Jersey Open Public Records Act (OPRA), N.J.S.A. 47:1A-1 et seq., or the common law right to know.
BIDDER RESPONSIBILITY
The Bidder assumes sole responsibility for the complete effort required in submitting a Quote in response to this Bid Solicitation. No special consideration will be given after Quotes are opened because of a Bidder’s failure to be knowledgeable as to all of the requirements of this Bid Solicitation. The State assumes no responsibility and bears no liability for costs incurred by a Bidder in the preparation and submittal of a Quote in response to this Bid Solicitation or any pre-contract award costs incurred.
ANNOUNCEMENT OF QUOTE INFORMATION
On the date and time Quotes are due under the Bid Solicitation, all information concerning the Quotes submitted may be publicly announced and shall be available for inspection and copying except otherwise noted:
A. Information appropriately designated as proprietary and/or confidential in a Bidder’s Quote shall not be available for inspection and copying; and B. Where negotiation is contemplated, only the names and addresses of the Bidders submitting Quotes will be announced, and the contents of the Quotes shall not be available for inspection and copying until the Notice of Intent to Award is issued by the Director.
QUOTE ERRORS
In accordance with N.J.A.C. 17:12-2.11 “Proposal errors,” a Bidder may withdraw its Quote as described below.
QUOTE WITHDRAWAL PRIOR TO QUOTE OPENING
A Bidder may withdraw its Quote submission in NJSTART prior to the Quote opening; however, Bidders should note that while withdrawn NJSTART Quotes remain viewable by the Bidder on its Vendor Profile Homepage, they are removed from the Division’s view and cannot be considered for Contract award. The Bidder may submit a revised Quote as long as the Quote is received prior to the announced date and time for Quote submission. Bidders may refer to the QRG “Submit a Quote” for additional instructions.
QUOTE WITHDRAWAL AFTER QUOTE OPENING, BUT PRIOR TO CONTRACT AWARD
If, after the Quote opening, but before Contract award, a Bidder discovers an error in its Quote, the Bidder may make a written request to the Procurement Bureau to withdraw its Quote, or a portion thereof, from consideration for award. If the Bidder’s request to withdraw is made in good faith, and the State will not be significantly prejudiced by granting the withdrawal of the Quote beyond the loss of the benefit of the bargain to the State of the withdrawing Bidder’s offer, the request shall be granted. Evidence of the Bidder’s good faith in making this request can be demonstrated by one (1) or more of the following factors: A mistake is so significant that to enforce the Contract resulting from the Quote would be unconscionable; that the mistake relates to a material feature or term of the Contract; and that the mistake occurred notwithstanding the Bidder’s exercise of reasonable care. After Quote opening, while pursuant to the provisions of this section a Bidder may request to withdraw its Quote and the Director may in his/her discretion allow said Bidder to withdraw it, the Division also may take notice of repeated or unusual requests to withdraw by a Bidder and take those prior requests to withdraw into consideration when evaluating the Bidder’s future Quotes.
The Quote withdrawal request must include the Bid Solicitation Number, Bid Solicitation Title, and the Quote submission date and should be sent to Procurement.Bureau@treas.nj.gov.
If, during a Quote evaluation process, an obvious pricing error made by a potential Contract awardee is found, the Director or his/her designee shall issue written notice to the Bidder. The Bidder will have up to five (5) business days after receipt of the notice to confirm its pricing. If the Bidder fails to respond, its Quote shall be considered withdrawn, and no further consideration shall be given to it.
JOINT VENTURE
If a Joint Venture is submitting a Quote, the agreement between the parties relating to such Joint Venture should be submitted with the Joint Venture’s Quote. Authorized signatories from each party comprising the Joint Venture must sign the Offer and Acceptance Page. Each party to the Joint Venture must individually complete and comply with all the forms and certification requirements in Bid Solicitation Section 3 – Quote Submission Requirements.
SMALL BUSINESS SET-ASIDE CONTRACTS
Not applicable to this procurement.
DISABLED VETERANS’ BUSINESS SET-ASIDE CONTRACT
Not applicable to this procurement.
BID SECURITY
Not applicable to this procurement.
BIDDER ADDITIONAL TERMS SUBMITTED WITH THE QUOTE
A Bidder may submit additional terms as part of its Quote. Additional terms are Bidder-proposed terms or conditions that do not conflict with the scope of work required in this Bid Solicitation, the terms and conditions of this Bid Solicitation, or the State of New Jersey Standard Terms and Conditions. Bidder proposed terms or conditions that conflict with those contained in the State of New Jersey Standard Terms and Conditions will render a Quote non-responsive. It is incumbent upon the Bidder to identify and remove its conflicting proposed terms and conditions prior to the Quote submission.
Quotes including Bidder proposed additional terms may be accepted, rejected, or negotiated, in whole or in part, at the State’s sole discretion.
If Bidder intends to propose terms and conditions that conflict with the State of New Jersey Standard Terms and Conditions, those Bidder proposed terms and conditions shall only be considered if submitted and agreed to pursuant to the electronic question and answer procedure. Bidders shall not submit exceptions or modifications as part of the Quote or on the “Terms and Conditions” Tab through NJSTART.
QUOTE CONTENT
The Quote should be submitted with the attachments organized in the following manner:
· Forms
· State-Supplied Price Sheet
A Bidder should not password protect any submitted documents. Use of URLs in a Quote should be kept to a minimum and shall not be used to satisfy any material term of a Bid Solicitation. If a preprinted or other document included as part of the Quote contains a URL, a printed copy of the information should be provided and will be considered as part of the Quote.
FORMS, REGISTRATIONS AND CERTIFICATIONS TO BE SUBMITTED WITH QUOTE
A Bidder is required to complete and submit the following forms. As an alternative to uploading certain forms with the submitted Quote, a Bidder may complete several certifications electronically in NJSTART on the “Terms and Categories” Tab within the Vendor Profile. Those forms that may be completed on the NJSTART “Terms and Categories” Tab are noted below. Additionally, a Bidder may attach completed forms to the Vendor Profile. Refer to QRGs “Vendor Forms” and “Attaching Files” for additional instructions. VENDOR QUICK REFERENCE GUIDES
OFFER AND ACCEPTANCE PAGE
The Bidder should complete and submit the Offer and Acceptance Page with the Quote. The Offer and Acceptance Page must be signed by an authorized representative of the Bidder. If a Bidder does not submit the form with the Quote, the Bidder must comply within seven (7) business days of the State’s request or the State may deem the Quote non-responsive.
OWNERSHIP DISCLOSURE FORM
Pursuant to N.J.S.A. 52:25-24.2, in the event the Bidder is a corporation, partnership or limited liability company, the Bidder must disclose all 10% or greater owners by (a) completing and submitting the Ownership Disclosure Form with the Quote; (b) if the Bidder has submitted a signed and accurate Ownership Disclosure Form dated and received no more than six (6) months prior to the Quote submission deadline for this procurement, the Division may rely upon that form; however, if there has been a change in ownership within the last six (6) months, a new Ownership Disclosure Form must be completed, signed and submitted with the Quote; or, (c) a Bidder with any direct or indirect parent entity which is publicly traded may submit the name and address of each publicly traded entity and the name and address of each person that holds a 10 percent or greater beneficial interest in the publicly traded entity as of the last annual filing with the federal Securities and Exchange Commission or the foreign equivalent, and, if there is any person that holds a 10 percent or greater beneficial interest, also shall submit links to the websites containing the last annual filings with the federal Securities and Exchange Commission or the foreign equivalent and the relevant page numbers of the filings that contain the information on each person that holds a 10 percent or greater beneficial interest. N.J.S.A. 52:25-24.2.
NOTE: In lieu of completing and submitting the paper-based form, the Bidder has the option to complete this form online in NJSTART on the “Terms and Categories” Tab.
A Bidder’s failure to submit the information required by N.J.S.A. 52:25-24.2 will result in the rejection of the Quote as non-responsive and preclude the award of a Contract to said Bidder.
DISCLOSURE OF INVESTMENT ACTIVITIES IN IRAN FORM
The Bidder should submit Disclosure of Investment Activities in Iran form to certify that, pursuant to N.J.S.A. 52:32-58, neither the Bidder, nor one (1) of its parents, subsidiaries, and/or affiliates (as defined in N.J.S.A. 52:32-56(e)(3)), is listed on the Department of the Treasury’s List of Persons or Entities Engaging in Prohibited Investment Activities in Iran and that neither the Bidder, nor one (1) of its parents, subsidiaries, and/or affiliates, is involved in any of the investment activities set forth in N.J.S.A. 52:32-56(f). If the Bidder is unable to so certify, the Bidder shall provide a detailed and precise description of such activities as directed on the form. If a Bidder does not submit the form with the Quote, the Bidder must comply within seven (7) business days of the State’s request or the State may deem the Quote non-responsive.
NOTE: In lieu of completing and submitting the paper-based form, the Bidder has the option to complete this certification online in NJSTART on the “Terms and Categories” Tab.
DISCLOSURE OF INVESTIGATIONS AND OTHER ACTIONS INVOLVING BIDDER FORM
The Bidder should submit the Disclosure of Investigations and Other Actions Involving Bidder Form, with its Quote, to provide a detailed description of any investigation, litigation, including administrative complaints or other administrative proceedings, involving any public sector clients during the past five (5) years, including the nature and status of the investigation, and, for any litigation, the caption of the action, a brief description of the action, the date of inception, current status, and, if applicable, disposition. If a Bidder does not submit the form with the Quote, the Bidder must comply within seven (7) business days of the State’s request or the State may deem the Quote non-responsive.
NOTE: In lieu of completing and submitting the paper-based form, the Bidder has the option to complete this certification online in NJSTART on the “Terms and Categories” Tab.
MACBRIDE PRINCIPLES FORM
The Bidder should submit the MacBride Principles Form. Pursuant to N.J.S.A. 52:34-12.2, a Bidder is required to certify that it either has no ongoing business activities in Northern Ireland and does not maintain a physical presence therein or that it will take lawful steps in good faith to conduct any business operations it has in Northern Ireland in accordance with the MacBride principles of nondiscrimination in employment as set forth in N.J.S.A. 52:18A-89.5 and in conformance with the United Kingdom’s Fair Employment (Northern Ireland) Act of 1989, and permit independent monitoring of their compliance with those principles. If a Bidder does not submit the form with the Quote, the Bidder must comply within seven (7) business days of the State’s request or the State may deem the Quote non-responsive.
NOTE: In lieu of completing and submitting the paper-based form, the Bidder has the option to complete this certification online in NJSTART on the “Terms and Categories” Tab.
SERVICE PERFORMANCE WITHIN THE UNITED STATES
Not applicable to this procurement.
CONFIDENTIALITY/COMMITMENT TO DEFEND
Pursuant to the New Jersey Open Public Records Act (OPRA), N.J.S.A. 47:1A-1 et seq., or the common law right to know, Quotes can be released to the public in accordance with N.J.A.C. 17:12-1.2(b) and (c).
The Bidder should submit a completed and signed Confidentiality/Commitment to Defend Form with the Quote. In the event that the Bidder does not submit the Confidentiality form with the Quote, the State reserves the right to request that the Bidder submit the form after Quote submission.
After the opening of sealed Quotes, all information submitted by a Bidder in response to a Bid Solicitation is considered public information notwithstanding any disclaimers to the contrary submitted by a Bidder. Proprietary, financial, security and confidential information may be exempt from public disclosure by OPRA and/or the common law when the Bidder has a good faith, legal/factual basis for such assertion.
When the Bid Solicitation contains a negotiation component, the Quote will not be subject to public disclosure until a notice of intent to award a Contract is announced.
As part of its Quote, a Bidder may request that portions of the Quote be exempt from public disclosure under OPRA and/or the common law. The Bidder must provide a detailed statement clearly identifying those sections of the Quote that it claims are exempt from production, and the legal and factual basis that supports said exemption(s) as a matter of law. The State will not honor any attempts by a Bidder to designate its price sheet, price list/catalog, and/or the entire Quote as proprietary and/or confidential, and/or to claim copyright protection for its entire Quote. If the State does not agree with a Bidder’s designation of proprietary and/or confidential information, the State will use commercially reasonable efforts to advise the Bidder. Copyright law does not prohibit access to a record which is otherwise available under OPRA.
The State reserves the right to make the determination as to what to disclose in response to an OPRA request. Any information that the State determines to be exempt from disclosure under OPRA will be redacted.
In the event of any challenge to the Bidder’s assertion of confidentiality that is contrary to the State’s determination of confidentiality, the Bidder shall be solely responsible for defending its designation, but in doing so, all costs and expenses associated therewith shall be the responsibility of the Bidder. The State assumes no such responsibility or liability.
In order not to delay consideration of the Quote or the State’s response to a request for documents, the State requires that Bidder respond to any request regarding confidentiality markings within the timeframe designated in the State’s correspondence regarding confidentiality. If no response is received by the designated date and time, the State will be permitted to release a copy of the Quote with the State making the determination regarding what may be proprietary or confidential.
SUBCONTRACTOR UTILIZATION PLAN
Bidders intending to use Subcontractor(s) shall list all subcontractors on the Subcontractor Utilization Plan form or may list the Subcontractor(s) on the “Subcontractor” Tab in NJSTART.
For a Quote that does NOT include the use of any Subcontractors, the Bidder is automatically certifying that, if selected for an award, the Bidder will be performing all work required by the Contract.
If it becomes necessary for the Contractor to substitute a Subcontractor, add a Subcontractor, or substitute its own staff for a Subcontractor, the Contractor will identify the proposed new Subcontractor or staff member(s) and the work to be performed. The Contractor shall forward a written request to substitute or add a Subcontractor or to substitute its own staff for a Subcontractor to the State Contract Manager for consideration. The Contractor must provide a completed Subcontractor Utilization Plan, a detailed justification documenting the necessity for the substitution or addition, and resumes of its proposed replacement staff or of the proposed Subcontractor’s management, supervisory, and other key personnel that demonstrate knowledge, ability and experience relevant to that part of the work which the Subcontractor is to undertake. The qualifications and experience of the replacement(s) must equal or exceed those of similar personnel proposed by the Contractor in its Quote. The State Contract Manager will forward the request to the Director for approval.
NOTE: No substituted or additional Subcontractors are authorized to begin work until the Contractor has received written approval from the Director.
SMALL BUSINESS AND/OR DISABLED VETERANS’ BUSINESS SUBCONTRACTING SET-ASIDE CONTRACT Not applicable to this procurement.
RESERVED
AFFIRMATIVE ACTION
The intended Contractor and its named Subcontractor(s) must submit a copy of a New Jersey Certificate of Employee Information Report, or a copy of Federal Letter of Approval verifying it is operating under a federally approved or sanctioned Affirmative Action program. If the Contractor and/or its named Subcontractor(s) are not in possession of either a New Jersey Certificate of Employee Information Report or a Federal Letter of Approval, it/they must complete and submit the Affirmative Action Employee Information Report (AA-302). Information, instruction and the application are available at https://www.state.nj.us/treasury/contract_compliance/index.shtml.
RESERVEd
STATE OF NEW JERSEY SECURITY DUE DILIGENCE THIRD-PARTY INFORMATION SECURITY QUESTIONNAIRE Not applicable to this procurement.
BUSINESS REGISTRATION
In accordance with N.J.S.A. 52:32-44(b), a Bidder and its named Subcontractors must have a valid Business Registration Certificate (“BRC”) issued by the Department of the Treasury, Division of Revenue and Enterprise Services prior to the award of a Contract. A Bidder should verify its Business Registration Certification Active status on the “Maintain Terms and Categories” Tab within its profile in NJSTART. In the event of an issue with a Bidder’s Business Registration Certification Active status, NJSTART provides a link to take corrective action.
3.13.14 Certification of Non-Involvement in Prohibited Activities in Russia or Belarus Pursuant to P.L.2022, c.3 The Bidder should submit the Certification of Non-Involvement in Prohibited Activities in Russia or Belarus Form. Pursuant to P.L.2022, c.3, a person or entity seeking to enter into or renew a contract for the provision of goods or services shall certify that it is not Engaging in Prohibited Activities in Russia or Belarus as defined by P.L.2002, c.3, sec. 1(e). If a Bidder does not submit the form with the Quote, the Bidder must comply within seven (7) business days of the State’s request or the State may deem the Quote non-responsive.
TECHNICAL QUOTE
Not applicable to this procurement.
BIDDER QUOTE OVERVIEW FORM
Not applicable to this procurement.
BIDDER DATA SHEET/FORM
The Bidder should submit the Bidder Data Sheet with its Quote. The Bidder Data Sheet will be used to evaluate the Bidder’s ability to complete the Scope of Work.
The Bidder should provide in its response to Part I of the Bidder Data Sheet all relevant information regarding its experience in successfully completing contracts of a similar size and scope to the work required by this Bid Solicitation.
The Bidder must provide, in Part II of the Bidder Data Sheet, details of any negative actions taken by other contracting entities against it in the course of performing these projects including, but not limited to, receipt of letters of potential default, default, cure notices, termination of services for cause, or other similar notifications/processes. Additionally, the Bidder should provide details, including any negative audits, reports, or findings by any governmental agency for which the Bidder is/was the contractor on any contracts of similar scope. In the event a Bidder neglects to include this information in its Quote, the Bidder’s omission of necessary disclosure information may be cause for rejection of the Bidder’s Quote by the State.
If proposing to use a Subcontractor, the Bidder should provide as an attachment to the Bidder Data Sheet documented experience to demonstrate that each Subcontractor has successfully performed work on contracts of a similar size and scope to the work that the Subcontractor is designated to perform in the Bidder’s Quote. The Bidder must provide a detailed description of services to be provided by each Subcontractor.
AFFIDAVIT OF APPAREL PRODUCTION
Not applicable to this procurement.
DISCLOSURE OF PRODUCT COMPOSITION
Not applicable to this procurement.
SPECIFICATION DATA SHEETS
Not applicable to this procurement.
SAMPLES AND TESTING
Not applicable to this procurement.
SPECIFICATION CONFORMANCE FORM
The Bidder shall submit with its Quote the Specification Conformance Form. By submitting this form, the Bidders certifies that all products and services offered in response to this Bid Solicitation conform to the requirements set forth in the Bid Solicitation.
By submitting this form, the Bidder also certifies that, when providing a Quote for non-OEM repairs, the Bidder is capable of servicing all systems and components of the brand/category of equipment bid. For example, a Bidder that bids on a loader repairs line must be capable of servicing the entire loader and not just a few components of the loader. A Quote to service the loader, for example, will not be considered if the Bidder is not capable of servicing all loader systems and components, including, but not limited to, engine, transmission, axle system components, hydraulics, electronic components, electrical and mechanical systems and cab components. By bidding on a repairs line for a brand/category of equipment and signing the Specification Conformance Form, the Bidder certifies that it is capable of servicing all systems and components of the brand/category of equipment bid. If requested, Bidders must so declare on its letterhead and provide all requested documentation as a proof of its capability to service all systems and components of the equipment bid. The State may terminate a Contract, if the Contractor is unable to or fails to service any system or component of the brand/category of equipment awarded. Misrepresentations on the Specification Conformance Form may be referred to the Division’s Contract Compliance and Audit Unit (CCAU) for losses incurred by the State, including disruption of State services.
MANUFACTURER’S CERTIFICATION
The Bidder must provide a certification letter for each group bid as follows:
For OEM Parts and Repairs Groups:
Bidders providing a Quote for OEM parts and repairs group for a brand of equipment should submit a certification with its Quote from the brand manufacturer (OEM) that the Bidder is authorized to supply OEM parts and service the brand of equipment bid and that the Bidder is capable of servicing all systems and components of the brand of equipment bid.
For Non-OEM Parts:
Bidders providing a Quote for non-OEM parts must submit a certification from the parts manufacturer or parts distributor that the Bidder is authorized to supply non-OEM parts for the category of equipment bid and that the non-OEM parts bid meet or exceed the quality of OEM parts and comply with all OEM recommendations for replacement parts.
General Information Pertaining to Manufacturer’s Certification:
All certifications should be on the company’s letterhead with company’s name, address, contact person’s name, telephone and fax numbers and e-mail address clearly identified. Alternatively, a Bidder could provide e-mail correspondence that clearly shows that the parts manufacturer or parts distributor certifies that the Bidder is capable of providing the non-OEM, as stated above.
The State reserves the right to request further information from the Bidder, parts manufacturer or parts distributor in order to ascertain the true intention of the submission. Such information must be provided within forty-eight (48) hours of notification of such request. Failure to do so may deem the Quote non-responsive for that group/price line.
If the Bidder does not provide the certification letter with its Quote for the brand(s) bid, the State reserves the right to request such certification and require that such certification be provided within three (3) business days from the time it is requested. Failure to provide the requested information may deem the Quote non-responsive for that group/price line.
MANUFACTURER’S PUBLISHED LIST OF OPTIONS AND ATTACHEMENTS/PRICE LIST
Not applicable to this procurement.
PRICE LIST AND/OR CATALOG
Due to the dynamic nature of parts pricing, Bidders are not required to provide a parts price list for the brand(s) bid with their Quote.
However, in accordance with Bid Solicitation Section 4.5 (Contract Ordering/Mini-Bid Process), the Contractor must provide the Using Agency with the contacted brand’s current parts price list upon request.
Any references to minimum orders, order threshold charges, service charges, price escalation clauses, sales or other applicable taxes, FOB shipping point limitations, and shipping charges, contained in the preprinted price lists provided to the Using Agency shall not apply.
If a price list for the brand is not published, then the prices listed on the Contractor’s letterhead, dated and with authorized signature are acceptable. The letter should include the Bid Solicitation/Contract number.
MANAGEMENT OVERVIEW
Not applicable to this procurement.
CONTRACT MANAGEMENT
Not applicable to this procurement.
CONTRACT SCHEDULE
Not applicable to this procurement.
MOBILIZATION PLAN
Not applicable to this procurement.
ADDITIONAL PLAN(S)
Not applicable to this procurement.
ORGANIZATIONAL EXPERIENCE
Not applicable to this procurement.
LOCATION
Not applicable to this procurement.
ORGANIZATION CHARTS
Not applicable to this procurement.
RESUMES
Not applicable to this procurement.
EXPERIENCE WITH CONTRACTS OF SIMILAR SIZE AND SCOPE
Not applicable to this procurement.
FINANCIAL CAPABILITY OF THE BIDDER
The Bidder should provide sufficient financial information to enable the State to assess the financial strength and creditworthiness of the Bidder and its ability to undertake and successfully complete the Contract. In order to provide the State with the ability to evaluate the Bidder’s financial capacity and capability to undertake and successfully complete the Contract, the Bidder should submit the following:
A. For publicly traded companies the Bidder should provide copies or the electronic location of the annual reports filed for the two most recent years; or B. For privately held companies the Bidder should provide the certified financial statement (audited or reviewed) in accordance with applicable standards by an independent Certified Public Accountant, including a balance sheet, income statement, and statement of cash flow, and all applicable notes for the most recent calendar year or the Bidder’s most recent fiscal year.
If the information is not supplied with the Quote, the State may still require the Bidder to submit it.
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .