T0121 25DPP01157 Bid Solicitation FINAL.docx

DOCX document 226 KB Posted

Attached to
Contract RFP/NJCOOP NJ|25-COMG-121962
Contract number
25-COMG-121962
Issued by
New Jersey

About this file

Bid Solicitation Summary

This is a bid solicitation issued by the State of New Jersey Department of the Treasury, Division of Purchase and Property, on behalf of the New Jersey Department of Transportation (NJDOT), statewide using agencies, and cooperative purchasing participants. The solicitation number is 25DPP01157 T0121 for Breakaway U-Post Sign Supports distributed statewide. The quote opening date is June 10, 2025, with electronic questions due by May 15, 2025. The procurement is being conducted through NJSTART, New Jersey's eProcurement system.

The contract covers three groups of products: Group 1 encompasses 31 price lines for Type 1 breakaway steel U-post sign supports, square sign posts, anchor posts, splice sleeves, anchor sleeves, soil anchor plates, and breakaway sign support system hardware, all galvanized per ASTM specifications; Group 2 comprises 7 price lines for omnidirectional breakaway brackets and associated hardware including hinge assemblies per Transpo Industries specifications; and Group 3 contains 20 price lines for hot-rolled steel wide-flange beams cut to length and drilled for bracket assemblies, priced per linear foot. The State intends to make one award per group. Bidders must bid on all price lines within a selected group to be considered responsive for that group. The contract term is four years with an option to extend up to three years through mutual written consent. This procurement is not designated as a small business or disabled veteran-owned business set-aside. Delivery is 30 calendar days after receipt of order, FOB destination, with the contractor assuming all costs and liability. Products must be new, current production items meeting NJDOT 2019 Standard Specifications for Road and Bridge Construction, and specimens may be required for testing per ASTM standards.

View the file

Other files

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Bid Solicitation #

25DPP01157

T0121 Breakaway U-Post Sign Supports - Statewide

Date
Time

Due Date For Electronic Questions Refer to Bid Solicitation Section 2.1 for more information.

May 15, 2025
2:00 PM

Mandatory/Optional Pre-Quote Conference Refer to Bid Solicitation Section 2.5 for more information.

Not Applicable to this Procurement

Mandatory/Optional Site Visit Refer to Bid Solicitation Section 2.4 for more information.

Not Applicable to this Procurement

Quote Opening Date Refer to Bid Solicitation Section 3 for more information.

June 10, 2025 July 11, 2025
2:00 PM

Dates are subject to change. All times contained in the Bid Solicitation refer to Eastern Time.

All changes will be reflected in Bid Amendments to the Bid Solicitation posted on www.njstart.gov.

SET-ASIDES

Small Business Set-Aside For Goods and Services:

☐ I ☐ II ☐ III

For Construction:

☐ IV ☐ V ☐ VI

☒ Not Applicable ☐ Entire Contract ☐ Partial Contract ☐ Subcontracting Only ☐ Preference

Disabled Veteran-Owned Business Set-Aside
Not Applicable

☐ Entire Contract ☐ Partial Contract ☐ Subcontracting Only ☐ Preference

Bid Solicitation Issued By:

State of New Jersey Department of the Treasury Division of Purchase and Property Trenton, New Jersey 08625‑0230 On Behalf of:

State of New Jersey Using Agencies Cooperative Purchasing Participants

Date: 11/6/20256/18/2025

TABLE OF CONTENTS

1INTRODUCTION AND SUMMARY OF THE BID SOLICITATION1
1.1PURPOSE, AND INTENT AND BACKGROUND1
1.2BACKGROUND4
1.3CONTRACT AMOUNT4
1.4ORDER OF PRECEDENCE OF CONTRACTUAL TERMS4
1.5INTRASTATE COOPERATIVE PURCHASING5
2PRE-QUOTE SUBMISSION INFORMATION5
2.1ELECTRONIC QUESTION AND ANSWER PERIOD5
2.2EXCEPTIONS TO THE STATE OF NJ STANDARD TERMS AND CONDITIONS (SSTC)5
2.3BID AMENDMENTS5
2.4MANDATORY/OPTIONAL SITE VISIT5
2.5MANDATORY/OPTIONAL PRE-QUOTE CONFERENCE5
2.6PRE-QUOTE DOCUMENT REVIEW5
3QUOTE SUBMISSION REQUIREMENTS5
3.1QUOTE SUBMISSION5
3.2BIDDER RESPONSIBILITY6
3.3ANNOUNCEMENT OF QUOTE INFORMATION6
3.4QUOTE ERRORS6
3.5QUOTE WITHDRAWAL PRIOR TO QUOTE OPENING6
3.6QUOTE WITHDRAWAL AFTER QUOTE OPENING, BUT PRIOR TO CONTRACT AWARD6
3.7JOINT VENTURE7
3.8SMALL BUSINESS SET-ASIDE CONTRACTS7
3.9DISABLED VETERANS’ BUSINESS SET-ASIDE CONTRACT7
3.10BID SECURITY7
3.11BIDDER ADDITIONAL TERMS SUBMITTED WITH THE QUOTE7
3.12QUOTE CONTENT7
3.13FORMS, REGISTRATIONS AND CERTIFICATIONS TO BE SUBMITTED WITH QUOTE7
3.13.1OFFER AND ACCEPTANCE PAGE8
3.13.2OWNERSHIP DISCLOSURE FORM8
3.13.3DISCLOSURE OF INVESTMENT ACTIVITIES IN IRAN FORM8
3.13.4DISCLOSURE OF INVESTIGATIONS AND OTHER ACTIONS INVOLVING BIDDER FORM8
3.13.5MACBRIDE PRINCIPLES FORM8
3.13.6SERVICE PERFORMANCE WITHIN THE UNITED STATES9
3.13.7CONFIDENTIALITY/COMMITMENT TO DEFEND9
3.13.8SUBCONTRACTOR UTILIZATION PLAN9
3.13.9RESERVED10
3.13.10AFFIRMATIVE ACTION10
3.13.11RESERVED10
3.13.12STATE OF NEW JERSEY SECURITY DUE DILIGENCE THIRD-PARTY INFORMATION SECURITY QUESTIONNAIRE10
3.13.13BUSINESS REGISTRATION10
3.13.14Certification of Non-Involvement in Prohibited Activities in Russia or Belarus Pursuant to P.L.2022, c.310
3.14TECHNICAL QUOTE10
3.15BIDDER QUOTE OVERVIEW FORM10
3.16BIDDER DATA SHEET/FORM10
3.17AFFIDAVIT OF APPAREL PRODUCTION11
3.18DISCLOSURE OF PRODUCT COMPOSITION11
3.19SPECIFICATION DATA SHEETS11
3.20SAMPLES AND TESTING11
3.21SPECIFICATION CONFORMANCE FORM11
3.22MANUFACTURER’S CERTIFICATION11
3.23MANUFACTURER’S PUBLISHED LIST OF OPTIONS AND ATTACHMENTS/PRICE LIST11
3.24PRICE LIST AND/OR CATALOG11
3.25MANAGEMENT OVERVIEW11
3.26CONTRACT MANAGEMENT11
3.27CONTRACT SCHEDULE11
3.28MOBILIZATION PLAN11
3.29ADDITIONAL PLAN(S)12
3.30ORGANIZATIONAL EXPERIENCE12
3.31LOCATION12
3.32ORGANIZATION CHARTS12
3.33RESUMES12
3.34EXPERIENCE WITH CONTRACTS OF SIMILAR SIZE AND SCOPE12
3.35FINANCIAL CAPABILITY OF THE BIDDER12
3.36STATE-SUPPLIED PRICE SHEET INSTRUCTIONS12
3.36.1DELIVERY TIME AND COSTS16
3.36.2CASH DISCOUNTS16
3.36.3VOLUME DISCOUNTS17
3.36.4USE OF “NO BID” VERSUS “NO CHARGE” ON THE STATE-SUPPLIED PRICE SHEET17
3.36.5USE OF “NO CHARGE” ON THE STATE-SUPPLIED PRICE SHEET17
3.37ORAL PRESENTATIONS17
4SCOPE OF WORK18
4.1DESCRIPTION OF U-POST SIGNS18
4.2GROUP 1 – PRICE LINES 1 THROUGH 3118
4.2.1TYPE 1: BREAKAWAY STEEL U-POST SIGN SUPPORTS and square sign posts – Price Lines 1 through 2618
4.2.2SOIL ANCHOR PLATES – PRICE LINE 2719
4.2.3FASTENERS AND OTHER BREAKAWAY HARDWARE – PRICE LINES 28 THROUGH 3119
4.3GROUP 2 – PRICE LINES 32 THROUGH 3819
4.3.1OMNI DIRECTIONAL BREAKAWAY BRACKETS AND ASSOCIATED HARDWARE – PRICE Lines 32 through 3819
4.4GROUP 3 – PRICE LINES 39 THROUGH 5820
4.4.1UPRIGHT BEAM POST FOR LARGER AND HIGHER SIGNS – PRICE LINES 39 THROUGH 5820
4.5GALVANIZED FINISH – PRICE LINES 1 THROUGH 5820
4.6INSPECTION AND TESTING20
4.7PACKAGING AND SHIPPING21
4.8DELIVERY21
4.9BRAND NAMES21
4.10CURRENT PRODUCTION ITEMS22
4.11REPLACEMENT OF UNSATISFACTORY PRODUCT22
4.12SUBSTITUTION OF DISCONTINUED OR REFORMULATED PRODUCTS22
4.13SUBSTITUTION OF PRODUCTS ON A TEMPORARY BASIS22
4.14PRICE LIST UPDATES22
5GENERAL CONTRACT TERMS23
5.1CONTRACT TERM AND EXTENSION OPTION23
5.2CONTRACT TRANSITION23
5.3PERFORMANCE SECURITY23
5.4OWNERSHIP OF MATERIAL23
5.5SUBSTITUTION OF STAFF23
5.6DELIVERY TIME AND COSTS23
5.7AUTHORIZED DEALER AND/OR DISTRIBUTORS24
5.8LIQUIDATED DAMAGES24
5.9RETAINAGE24
5.10ELECTRONIC PAYMENTS24
5.11PROCUREMENT EFFICIENCY PROGRAM24
6DATA SECURITY REQUIREMENTS – CONTRACTOR RESPONSIBILITY25
7MODIFICATIONS TO THE STATE OF NEW JERSEY STANDARD TERMS AND CONDITIONS25
8QUOTE EVALUATION AND AWARD25
8.1RIGHT TO WAIVE25
8.2DIRECTOR’S RIGHT TO ACCEPT OR REJECT A QUOTE25
8.3RECIPROCITY FOR JURISDICTIONAL BIDDER PREFERENCE25
8.4CLARIFICATION OF QUOTE25
8.5ORAL PRESENTATION26
8.6TIE QUOTES26
8.7STATE'S RIGHT TO INSPECT BIDDER’S FACILITIES26
8.8STATE'S RIGHT TO CHECK REFERENCES26
8.9EVALUATION CRITERIA26
8.9.1TECHNICAL EVALUATION CRITERIA26
8.9.2PRICE EVALUATION26
8.10QUOTE DISCREPANCIES27
8.11NEGOTIATION27
8.12BEST AND FINAL OFFER (BAFO)27
8.13“REQUEST FOR REVISION” WITHIN NJSTART27
8.14POOR PERFORMANCE27
8.15RECOMMENDATION FOR AWARD28
8.16CONTRACT AWARD28
9GLOSSARY28
9.1CROSSWALK28
9.2DEFINITIONS28
9.3CONTRACT-SPECIFIC DEFINITIONS34

ATTACHMENT 1 – State of New Jersey Standard Terms and Conditions (2/8/2024)(6/3/2025) ATTACHMENT 2 – Standard Procurement Forms Packet ATTACHMENT 3 – Bidder Data Sheet/Form ATTACHMENT 4 – Specification Conformance Form ATTACHMENT 5 – NJDOT Sketches Revised 6.19.2025 iii

INTRODUCTION AND SUMMARY OF THE BID SOLICITATION

This Bid Solicitation is issued by the Department of the Treasury, Division of Purchase and Property (Division), Procurement Bureau, on behalf of of the New Jersey Department of Transportation (NJDOT), Statewide Using Agencies, and the Cooperative Purchasing Participants. Quotes submitted in response to this Bid Solicitation shall be through the State of New Jersey’s eProcurement system, NJSTART. Bidders are advised to thoroughly read all sections of this Bid Solicitation and follow all instructions.

Bidders are strongly encouraged to visit the NJSTART Vendor Support Page, which contains Quick Reference Guides (QRGs), supporting videos, a glossary of NJSTART terms, and helpdesk contact information. Bidders should utilize the QRGs before attempting to submit a Quote through NJSTART. It is the Bidder’s responsibility to ensure that the Quote and attachments have been properly submitted. Inquiries concerning the use of NJSTART may be directed to njstart@treas.nj.gov. The Division will not respond to substantive questions related to the Bid Solicitation or any other Contract via this email address.

PURPOSE, AND INTENT AND BACKGROUND

The purpose of this Bid Solicitation is to solicit Quotes for Breakaway U-Post Sign Supports - Statewide.

It is the intent of the State of New Jersey (State) to award Contracts to those responsible Bidders whose Quotes, conforming to this Bid Solicitation are most advantageous to the State, price and other factors considered. The State may award any or all price lines. The State, however, reserves the right to separately procure individual requirements that are the subject of the Contract during the Contract term, when deemed by the Director of the Division (Director) to be in the State’s best interest.

The Bid Solicitation and State-Supplied Price Sheet contain the following Groups and Individual Price Lines:

Group 1 – Price Lines 1 through 31

Price Line Number
Item Description
Unit of Measure
Number of Statewide Contract Awards for the Group
1
U-POST SIGN/STEEL, SIZE 6 FT., TYPE 1- 1.12 LB./FT. GALV., AS PER BID SOLICITATION SECTION 4.2.1.
Each
2
U-POST SIGN/STEEL, SIZE 6 FT., TYPE 1- 2.00 LB./FT. GALV., AS PER BID SOLICITATION SECTION 4.2.1.
Each
3
U-POST SIGN/STEEL, SIZE 3.5 FT., TYPE 1- 2.50 LB./FT. GALV., AS PER BID SOLICITATION SECTION 4.2.1.
Each
4
U-POST SIGN/STEEL, SIZE 6 FT., TYPE 1- 2.50 LB./FT. GALV., AS PER BID SOLICITATION SECTION 4.2.1.
Each
5
U-POST SIGN/STEEL, SIZE 8 FT., TYPE 1- 2.50 LB./FT. GALV., AS PER BID SOLICITATION SECTION 4.2.1.
Each
6
U-POST SIGN/STEEL, SIZE 10 FT., TYPE 1- 2.50 LB./FT. GALV., AS PER BID SOLICITATION SECTION 4.2.1.
Each
7
U-POST SIGN/STEEL, SIZE 12 FT., TYPE 1- 2.50 LB./FT. GALV., AS PER BID SOLICITATION SECTION 4.2.1.
Each
8
U-POST SIGN/STEEL, SIZE 14 FT., TYPE 1- 2.50 LB./FT. GALV., AS PER BID SOLICITATION SECTION 4.2.1.
Each
9
U-POST SIGN/STEEL, SIZE 3.5 FT., TYPE 1- 4.00 LB./FT. GALV., AS PER BID SOLICITATION SECTION 4.2.1.
Each
10
U-POST SIGN/STEEL, SIZE 6 FT., TYPE 1- 4.00 LB./FT. GALV., AS PER BID SOLICITATION SECTION 4.2.1.
Each
11
U-POST SIGN/STEEL, SIZE 8 FT., TYPE 1- 4.00 LB./FT. GALV., AS PER BID SOLICITATION SECTION 4.2.1.
Each
12
U-POST SIGN/STEEL, SIZE 10 FT., TYPE 1- 4.00 LB./FT. GALV., AS PER BID SOLICITATION SECTION 4.2.1.
Each
13
U-POST SIGN/STEEL, SIZE 12 FT., TYPE 1- 4.00 LB./FT. GALV., AS PER BID SOLICITATION SECTION 4.2.1.
Each
14
U-POST SIGN/STEEL, SIZE 14 FT., TYPE 1- 4.00 LB./FT. GALV., AS PER BID SOLICITATION SECTION 4.2.1.
Each
15
SQUARE SIGN POST, LENGTH 10 FT., SIZE 2.00 INCHES, GALV., AS PER BID SOLICITATION SECTION 4.2.1.
Each
16
SQUARE SIGN POST, LENGTH 10 FT., SIZE 2.25 INCHES, GALV., AS PER BID SOLICITATION SECTION 4.2.1.
Each
17
SQUARE SIGN POST, LENGTH 12 FT., SIZE 2.00 INCHES, GALV., AS PER BID SOLICITATION SECTION 4.2.1.
Each
18
SQUARE SIGN POST, LENGTH 12 FT., SIZE 2.25 INCHES, AS PER BID SOLICITATION SECTION 4.2.1.
Each
19
SQUARE SIGN POST, LENGTH 14 FT., SIZE 2.00 INCHES, GALV., AS PER BID SOLICITATION SECTION 4.2.1.
Each
20
SQUARE SIGN POST, LENGTH 14 FT., SIZE 2.25 INCHES, GALV., AS PER BID SOLICITATION SECTION 4.2.1.
Each
21
ANCHOR POST LENGTH 3 FT., SIZE 2.25 INCHES, GALV., AS PER BID SOLICITATION SECTION 4.2.1.
Each
22
ANCHOR POST LENGTH 3 FT., SIZE 2.50 INCHES, GALV., AS PER BID SOLICITATION SECTION 4.2.1.
Each
23
SPLICE SLEEVE LENGTH 18 INCHES, SIZE 1.75 INCHES, GALV., AS PER BID SOLICITATION SECTION 4.2.1.
Each
24
SPLICE SLEEVE LENGTH 18 INCHES, SIZE 2.00 INCHES, GALV., AS PER BID SOLICITATION SECTION 4.2.1.
Each
25
ANCHOR SLEEVE LENGTH 18 INCHES, SIZE 2.50 INCHES, THICKNESS 0.1046 INCHES, GALV., AS PER BID SOLICITATION SECTION 4.2.1.
Each
26
ANCHOR SLEEVE LENGTH 18 INCHES, SIZE 3.00 INCHES, THICKNESS 0.1875 INCHES, GALV., AS PER BID SOLICITATION SECTION 4.2.1.
Each
27
SOIL ANCHOR PLATE/11 GAUGE STEEL, TYPE 1, GALV., AS PER BID SOLICITATION SECTION 4.2.2.
Each
28
BREAKAWAY SIGN SUPPORT SYSTEM/STEEL, TYPE 1, INCLUDES SPACER BAR, ALL HARDWARE, ALL FASTENERS, AS PER BID SOLICITATION SECTION 4.2.3
Each
29
BREAKAWAY SIGN SUPPORT SYSTEM/STEEL, TYPE 1, EXCLUDING SPACER BAR, INCLUDES ALL HARDWARE, ALL FASTENERS, AS PER BID SOLICITATION SECTION 4.2.3
Each
30
5/16 INCH CORNER BOLT AND NUT – 18 UNC, AS PER BID SOLICITATION SECTION 4.2.3.
Each
31
3/8 INCH CORNER ANCHOR BOLT AND NUT – 16 UNC, AS PER BID SOLICITATION SECTION 4.2.3.
Each

Group 2 – Price Lines 32 through 38

Price Line Number
Item Description
Unit of Measure
Number of Statewide Contract Awards for the Group
32
OMNI DIRECTIONAL BREAKAWAY BRACKETS WITH HINGE ASSEMBLY, TRANSPO MODEL B525 OR APPROVED EQUAL. 6061 - T6 ALUMINUM, AS PER BID SOLICITATION SECTION 4.3.1.
Each
33
OMNI DIRECTIONAL BREAKAWAY BRACKETS WITH HINGE ASSEMBLY, TRANSPO MODEL B650 OR APPROVED EQUAL. 6061 - T6 ALUMINUM, AS PER BID SOLICITATION SECTION 4.3.1.
Each
34
BRACKET COUPLING & SPECIAL ASSEMBLY TYPE B, TRANSPO MODEL B525 OR APPROVED EQUAL. INCLUDES SPECIAL BOLT ASTM 449 1-8UNC HOT DIPPED GALVANIZED; SPECIAL COUPLING 1"-8 UNC LP. AMS 6378D HOT DIPPED GALVANIZED; 14 GA. X 1" HORSESHOE SHIM 18 GA. X 1" HORSESHOE SHIM, AS PER BID SOLICITATION SECTION 4.3.1.
Each
35
ANCHOR ASSEMBLY, TYPE B 1"-8UNC 304 STAINLESS STEEL FERNULE, AISC ROD 1045, TRANSPO MODEL B525 OR APPROVED EQUAL, AS PER BID SOLICITATION SECTION 4.3.1.
Each
36
HINGE ASSEMBLY TYPE B525 INCLUDES HINGE PLATE AISI 4130 STEEL, ASTM 123 - HOT DIPPED GALVANIZED PACKAGE OF FOUR (4) , AS PER BID SOLICITATION SECTION 4.3.1.
Each
37
HINGE ASSEMBLY TYPE B650 INCLUDES HINGE PLATE AISI 4130 STEEL, ASTM 123 - HOT DIPPED GALVANIZED PACKAGE OF FOUR (4) , AS PER BID SOLICITATION SECTION 4.3.1.
Each
38
HINGE ASSEMBLY HARDWARE - TYPE B INCLUDES THE FOLLOWING 8 PCS. BOLT 3/4"-10 X 2 1/4" A325 HOT DIPPED GALVANIZED 8 PCS. LOCKWASHER 3/4" B18-21-1" HOT DIPPED GALVANIZED 8 PCS. NUT 3/4"-10 UNC HEAVY HEX GRADE DH ALL MATERIAL ASTM A153 FITS BOTH B525 AND B650 HINGE ASSEMBLY, AS PER BID SOLICITATION SECTION 4.3.1.
Each

Group 3 – Price Lines 39 through 58

Price Line Number
Item Description
Unit of Measure
Number of Statewide Contract Awards for the Group
HOT ROLLED STEEL BEAM W 6 X 12.0# WIDE FLANGE BEAM CUT TO LENGTH AND FLANGE DRILLED PER SKETCH FOR B525 OR B650 BRACKET ASSEMBLY HOT DIPPED GALVANIZED A123, LENGTH NOT TO EXCEED 20 FEET LONG, AS PER BID SOLICITATION SECTION 4.4.1.
Linear Foot
40
HOT ROLLED STEEL BEAM W 6 X 12.0# WIDE FLANGE BEAM CUT TO LENGTH AND FLANGE DRILLED PER SKETCH FOR B525 OR B650 BRACKET ASSEMBLY HOT DIPPED GALVANIZED A123, LENGTH NOT TO EXCEED 25 FEET LONG, AS PER BID SOLICITATION SECTION 4.4.1.
Linear Foot
HOT ROLLED STEEL BEAM W 6 X 16.0# WIDE FLANGE BEAM CUT TO LENGTH AND FLANGE DRILLED PER SKETCH FOR B525 OR B650 BRACKET ASSEMBLY HOT DIPPED GALVANIZED, LENGTH NOT TO EXCEED 20 FEET LONG, AS PER BID SOLICITATION SECTION 4.4.1.
Linear Foot
42
HOT ROLLED STEEL BEAM W 6 X 16.0# WIDE FLANGE BEAM CUT TO LENGTH AND FLANGE DRILLED PER SKETCH FOR B525 OR B650 BRACKET ASSEMBLY HOT DIPPED GALVANIZED, LENGTH NOT TO EXCEED 25 FEET LONG, AS PER BID SOLICITATION SECTION 4.4.1.
Linear Foot
HOT ROLLED STEEL BEAM W 8 X 18.0# WIDE FLANGE BEAM CUT TO LENGTH AND FLANGE DRILLED PER SKETCH FOR B525 OR B650 BRACKET ASSEMBLY HOT DIPPED GALVANIZED, LENGTH NOT TO EXCEED 20 FEET LONG, AS PER BID SOLICITATION SECTION 4.4.1.
Linear Foot
44
HOT ROLLED STEEL BEAM W 8 X 18.0# WIDE FLANGE BEAM CUT TO LENGTH AND FLANGE DRILLED PER SKETCH FOR B525 OR B650 BRACKET ASSEMBLY HOT DIPPED GALVANIZED, LENGTH NOT TO EXCEED 25 FEET LONG, AS PER BID SOLICITATION SECTION 4.4.1.
Linear Foot
HOT ROLLED STEEL BEAM W 8 X 21.0# WIDE FLANGE BEAM CUT TO LENGTH AND FLANGE DRILLED PER SKETCH FOR B525 OR B650 BRACKET ASSEMBLY HOT DIPPED GALVANIZED, LENGTH NOT TO EXCEED 20 FEET LONG, AS PER BID SOLICITATION SECTION 4.4.1.
Linear Foot
46
HOT ROLLED STEEL BEAM W 8 X 21.0# WIDE FLANGE BEAM CUT TO LENGTH AND FLANGE DRILLED PER SKETCH FOR B525 OR B650 BRACKET ASSEMBLY HOT DIPPED GALVANIZED, LENGTH NOT TO EXCEED 25 FEET LONG, AS PER BID SOLICITATION SECTION 4.4.1.
Linear Foot
HOT ROLLED STEEL BEAM W10 X 22.0# WIDE FLANGE BEAM CUT TO 22.5 FEET AND FLANGE DRILLED PER SKETCH FOR B525 OR B650 BRACKET ASSEMBLY HOT DIPPED GALVANIZED, AS PER BID SOLICITATION SECTION 4.4.1.
Linear Foot
48
HOT ROLLED STEEL BEAM W10 X 22.0# WIDE FLANGE BEAM CUT TO LENGTH AND FLANGE DRILLED PER SKETCH FOR B525 OR B650 BRACKET ASSEMBLY HOT DIPPED GALVANIZED, LENGTH NOT TO EXCEED 25 FEET LONG, AS PER BID SOLICITATION SECTION 4.4.1.
Linear Foot
HOT ROLLED STEEL BEAM W10 X 26.0# WIDE FLANGE BEAM CUT TO LENGTH AND FLANGE DRILLED PER SKETCH FOR B525 OR B650 BRACKET ASSEMBLY HOT DIPPED GALVANIZED, LENGTH NOT TO EXCEED 20 FEET LONG, AS PER BID SOLICITATION SECTION 4.4.1.
Linear Foot
50
HOT ROLLED STEEL BEAM W10 X 26.0# WIDE FLANGE BEAM CUT TO LENGTH AND FLANGE DRILLED PER SKETCH FOR B525 OR B650 BRACKET ASSEMBLY HOT DIPPED GALVANIZED, LENGTH NOT TO EXCEED 25 FEET LONG, AS PER BID SOLICITATION SECTION 4.4.1.
Linear Foot
HOT ROLLED STEEL BEAM W12 X 26.0# WIDE FLANGE BEAM CUT TO LENGTH AND FLANGE DRILLED PER SKETCH FOR B525 OR B650 BRACKET ASSEMBLY HOT DIPPED GALVANIZED, LENGTH NOT TO EXCEED 20 FEET LONG, AS PER BID SOLICITATION SECTION 4.4.1.
Linear Foot
52
HOT ROLLED STEEL BEAM W12 X 26.0# WIDE FLANGE BEAM CUT TO LENGTH AND FLANGE DRILLED PER SKETCH FOR B525 OR B650 BRACKET ASSEMBLY HOT DIPPED GALVANIZED, LENGTH NOT TO EXCEED 20 FEET LONG, AS PER BID SOLICITATION SECTION 4.4.1.
Linear Foot
HOT ROLLED STEEL BEAM W14 X 30.0# WIDE FLANGE BEAM CUT TO LENGTH AND FLANGE DRILLED PER SKETCH FOR B525 OR B650 BRACKET ASSEMBLY HOT DIPPED GALVANIZED, LENGTH NOT TO EXCEED 20 FEET LONG, AS PER BID SOLICITATION SECTION 4.4.1.
Linear Foot
54
HOT ROLLED STEEL BEAM W14 X 30.0# WIDE FLANGE BEAM CUT TO LENGTH AND FLANGE DRILLED PER SKETCH FOR B525 OR B650 BRACKET ASSEMBLY HOT DIPPED GALVANIZED, LENGTH NOT TO EXCEED 25 FEET LONG, AS PER BID SOLICITATION SECTION 4.4.1.
Linear Foot
HOT ROLLED STEEL BEAM W18 X 35.0# WIDE FLANGE BEAM CUT TO LENGTH AND FLANGE DRILLED PER SKETCH FOR B525 OR B650 BRACKET ASSEMBLY HOT DIPPED GALVANIZED, LENGTH NOT TO EXCEED 20 FEET LONG, AS PER BID SOLICITATION SECTION 4.4.1.
Linear Foot
56
HOT ROLLED STEEL BEAM W18 X 35.0# WIDE FLANGE BEAM CUT TO LENGTH AND FLANGE DRILLED PER SKETCH FOR B525 OR B650 BRACKET ASSEMBLY HOT DIPPED GALVANIZED, LENGTH NOT TO EXCEED 25 FEET LONG, AS PER BID SOLICITATION SECTION 4.4.1.
Linear Foot
HOT ROLLED STEEL BEAM W18 X 40.0# WIDE FLANGE BEAM CUT TO LENGTH AND FLANGE DRILLED PER SKETCH FOR B525 OR B650 BRACKET ASSEMBLY HOT DIPPED GALVANIZED, LENGTH NOT TO EXCEED 20 FEET LONG, AS PER BID SOLICITATION SECTION 4.4.1.
Linear Foot
58
HOT ROLLED STEEL BEAM W18 X 40.0# WIDE FLANGE BEAM CUT TO LENGTH AND FLANGE DRILLED PER SKETCH FOR B525 OR B650 BRACKET ASSEMBLY HOT DIPPED GALVANIZED, LENGTH NOT TO EXCEED 25 FEET LONG, AS PER BID SOLICITATION SECTION 4.4.1.
Linear Foot

Important: The Bureau does not intend to invoke the Best and Final Offer process (Bid Solicitation Section 8.12) for this procurement. As such, Bidders are encouraged to submit their best and final Quote pricing for each price line bid with its Quote submission. The Bureau, however, reserves the right to invoke the Best and Final Offer process should it feel it is in the best interest of the State.

The State intends to make awards as follows:

For Groups 1, 2 and 3:

For Groups 1, 2 and 3 the State intends to make one (1) Contract award per Group.

Bidders must bid on all price lines contained within the Group. If a Bidder does not bid on all price lines within the Group, its Quote will be considered non-responsive for that Group.

A Bidder is not required to bid on all Groups on the State-Supplied Price Sheet in order to be considered responsive.

Price line items are grouped for Quote evaluation purposes only. Upon Contract award, Using Agencies will be able to order any price lines within the Groups individually.

This Bid Solicitation is not designated as a Small Business or Disabled Veteran-Owned Business set aside.

The State of New Jersey Standard Terms and Conditions (SSTCs) included with this Bid Solicitation will apply to all Contracts made with the State. These terms are in addition to the terms and conditions set forth in this Bid Solicitation and should be read in conjunction with them unless the Bid Solicitation specifically indicates otherwise.

BACKGROUND

This is a reprocurement of the products under Breakaway U-Post Sign Supports. Bidders interested in reviewing the expiring Contract’s specifications and pricing information may do so by following the instructions below. Bidders should not rely upon or use data or information from the expiring Contract when preparing a response to this Bid Solicitation as this Bid Solicitation addresses the State’s current requirements.

· Go to: www.njstart.gov

· Select “Active Contracts”

· In the search bar, select “Contracts” from the drop down menu

· Enter “T0121” and click “”

· The expiring Contract list will appear under “Results”

CONTRACT AMOUNT

The estimated amount of the Contract, if stated, shall not be construed as either the maximum or minimum amount which the State shall be obligated to order.

ORDER OF PRECEDENCE OF CONTRACTUAL TERMS

The Contract awarded, and the entire agreement between the parties, as a result of this Bid Solicitation shall consist of: (1) the final Bid Solicitation, (2) the State of New Jersey Standard Terms and Conditions, (3) the Quote, and if applicable (4) any Bidder responses to clarifications; (5) a Bidder’s Best and Final Offer, (6) other negotiated document, and/or (7) third party document. In the event of a conflict in the terms and conditions among the documents comprising this Contract, the order of precedence, for purposes of interpretation thereof, shall be as listed from highest ranking to lowest ranking as noted above.

Any other terms or conditions, not included with the Bidder’s Quote and accepted by the State, shall not be incorporated into the Contract awarded. Any references to external documentation, including those documents referenced by a URL, including without limitation, technical reference manuals, technical support policies, copyright notices, additional license terms, etc., are subject to the terms and conditions of the Bid Solicitation and the State of New Jersey Standard Terms and Conditions. In the event of any conflict between the terms of a document incorporated by reference, the terms and conditions of the Bid Solicitation and the State of New Jersey Standard Terms and Conditions shall prevail.

INTRASTATE COOPERATIVE PURCHASING

The State intends to extend the Contracts awarded to the State's Intrastate Cooperative Purchasing Participants. Although the State is making the use of any Contract resulting from this Bid Solicitation available to Intrastate Cooperative Purchasing Participants, the State makes no representation as to the acceptability of the Bid Solicitation’s terms and conditions to any Intrastate Cooperative Purchasing Participants.

PRE-QUOTE SUBMISSION INFORMATION

The Bidder assumes sole responsibility for the complete effort required in submitting a Quote and for reviewing the Quote submission requirements and the Scope of Work requirements.

ELECTRONIC QUESTION AND ANSWER PERIOD

The Division will electronically accept questions and inquiries from all potential Bidders via the “Q&A” Tab of the Bid Solicitation in NJSTART. Questions should be directly tied to a Bid Solicitation Section, the State-Supplied Price Sheet, Form or Attachment; and should reference the specific Bid Solicitation Section or document to which it relates.

The cut-off date for electronic questions and inquiries relating to this Bid Solicitation is indicated on the Bid Solicitation cover page. In the event that questions are posed by Bidders, answers to such questions will be issued by Bid Amendment.

A Bidder shall not contact the Using Agency and/or the Procurement Specialist directly, in person, by telephone or by e-mail, concerning this Bid Solicitation, prior to Contract award.

EXCEPTIONS TO THE STATE OF NJ STANDARD TERMS AND CONDITIONS (SSTC)

Questions regarding the State of New Jersey Standard Terms and Conditions and exceptions to mandatory requirements MUST be posed during the Electronic Question and Answer period and shall contain the Bidder’s suggested changes and the reason(s) for the suggested change(s).

BID AMENDMENTS

In the event that it becomes necessary to clarify or revise this Bid Solicitation, such clarification or revision will be by Bid Amendment. Any Bid Amendment will become part of this Bid Solicitation and part of any Contract awarded. Bid Amendments will be posted as a file attachment on the “Summary” page of the Bid Solicitation in NJSTART after the cut-off date.

There are no designated dates for release of Bid Amendments. Those Bidders who are on the bid holder list either through commodity code registration in NJSTART or by acknowledging the bid in NJSTART should receive notification of any Bid Amendment(s). If a Bidder is not on the bid holder list, Bid Amendments are still viewable on the “Summary” page of the Bid Solicitation in NJSTART.

It is the sole responsibility of the Bidder to be knowledgeable of all Bid Amendments related to this procurement. An interested Bidder should check the NJSTART “Open Bids” Tab on a daily basis to ensure review of the most updated information.

MANDATORY/OPTIONAL SITE VISIT

Not applicable to this procurement.

MANDATORY/OPTIONAL PRE-QUOTE CONFERENCE

Not applicable to this procurement.

PRE-QUOTE DOCUMENT REVIEW

Not applicable to this procurement.

QUOTE SUBMISSION REQUIREMENTS

QUOTE SUBMISSION

In order to be considered for award, the Quote must be received electronically by the Division’s Proposal Review Unit, through NJSTART, by the required date and time.

The date and time of the Quote opening are indicated on the Bid Solicitation cover sheet and on the “Summary” Tab of the Bid Solicitation webpage within NJSTART. If the Quote opening deadline has been revised, the new Quote opening deadline will be shown on the posted Bid Amendment and on the “Summary” Tab of the Bid Solicitation webpage within NJSTART. Quotes not received prior to the Quote opening deadline shall be rejected.

Quotes will be publicly opened and announced by telephone conference on the date and time of the quote opening.

(Dial-in phone number: 888-204-5984 / Access code: 2602305)

When submitting a Quote through NJSTART, do not use any symbols (i.e., #, @, $, &, *) in the filename as this may prevent the Quote from being properly uploaded. Uploaded files must be compatible with Microsoft Office and/or Adobe software applications. DO NOT UPLOAD files with extensions such as .zip, .numbers, or .pages.

When uploading the documents to NJSTART, the Bidder should select the “Confidential” option in NJSTART for attachments on the “Attachments” Tab to request that the documents not be displayed publicly through NJSTART. Marking an attachment as "Confidential" in NJSTART shall not constitute the Bidder's designation of the attachment as exempt from public disclosure under the New Jersey Open Public Records Act (OPRA), N.J.S.A. 47:1A-1 et seq., or the common law right to know.

BIDDER RESPONSIBILITY

The Bidder assumes sole responsibility for the complete effort required in submitting a Quote in response to this Bid Solicitation. No special consideration will be given after Quotes are opened because of a Bidder’s failure to be knowledgeable as to all of the requirements of this Bid Solicitation. The State assumes no responsibility and bears no liability for costs incurred by a Bidder in the preparation and submittal of a Quote in response to this Bid Solicitation or any pre-contract award costs incurred.

ANNOUNCEMENT OF QUOTE INFORMATION

On the date and time Quotes are due under the Bid Solicitation, all information concerning the Quotes submitted may be publicly announced and shall be available for inspection and copying except otherwise noted:

A. Information appropriately designated as proprietary and/or confidential in a Bidder’s Quote shall not be available for inspection and copying; and B. Where negotiation is contemplated, only the names and addresses of the Bidders submitting Quotes will be announced, and the contents of the Quotes shall not be available for inspection and copying until the Notice of Intent to Award is issued by the Director.

QUOTE ERRORS

In accordance with N.J.A.C. 17:12-2.11 “Proposal errors,” a Bidder may withdraw its Quote as described below.

QUOTE WITHDRAWAL PRIOR TO QUOTE OPENING

A Bidder may withdraw its Quote submission in NJSTART prior to the Quote opening; however, Bidders should note that while withdrawn NJSTART Quotes remain viewable by the Bidder on its Vendor Profile Homepage, they are removed from the Division’s view and cannot be considered for Contract award. The Bidder may submit a revised Quote as long as the Quote is received prior to the announced date and time for Quote submission. Bidders may refer to the QRG “Submit a Quote” for additional instructions.

QUOTE WITHDRAWAL AFTER QUOTE OPENING, BUT PRIOR TO CONTRACT AWARD

If, after the Quote opening, but before Contract award, a Bidder discovers an error in its Quote, the Bidder may make a written request to the Procurement Bureau to withdraw its Quote, or a portion thereof, from consideration for award. If the Bidder’s request to withdraw is made in good faith, and the State will not be significantly prejudiced by granting the withdrawal of the Quote beyond the loss of the benefit of the bargain to the State of the withdrawing Bidder’s offer, the request shall be granted. Evidence of the Bidder’s good faith in making this request can be demonstrated by one (1) or more of the following factors: A mistake is so significant that to enforce the Contract resulting from the Quote would be unconscionable; that the mistake relates to a material feature or term of the Contract; and that the mistake occurred notwithstanding the Bidder’s exercise of reasonable care. After Quote opening, while pursuant to the provisions of this section a Bidder may request to withdraw its Quote and the Director may in his/her discretion allow said Bidder to withdraw it, the Division also may take notice of repeated or unusual requests to withdraw by a Bidder and take those prior requests to withdraw into consideration when evaluating the Bidder’s future Quotes.

The Quote withdrawal request must include the Bid Solicitation Number, Bid Solicitation Title, and the Quote submission date and should be sent to Procurement.Bureau@treas.nj.gov.

If, during a Quote evaluation process, an obvious pricing error made by a potential Contract awardee is found, the Director or his/her designee shall issue written notice to the Bidder. The Bidder will have up to five (5) Business Days after receipt of the notice to confirm its pricing. If the Bidder fails to respond, its Quote shall be considered withdrawn, and no further consideration shall be given to it.

JOINT VENTURE

If a Joint Venture is submitting a Quote, the agreement between the parties relating to such Joint Venture should be submitted with the Joint Venture’s Quote. Authorized signatories from each party comprising the Joint Venture must sign the Offer and Acceptance Page. Each party to the Joint Venture must individually complete and comply with all the forms and certification requirements in Bid Solicitation Section 3 – Quote Submission Requirements.

SMALL BUSINESS SET-ASIDE CONTRACTS

Not applicable to this procurement.

DISABLED VETERANS’ BUSINESS SET-ASIDE CONTRACT

Not applicable to this procurement.

BID SECURITY

Not applicable to this procurement.

BIDDER ADDITIONAL TERMS SUBMITTED WITH THE QUOTE

A Bidder may submit additional terms as part of its Quote. Additional terms are Bidder-proposed terms or conditions that do not conflict with the scope of work required in this Bid Solicitation, the terms and conditions of this Bid Solicitation, or the State of New Jersey Standard Terms and Conditions. Bidder proposed terms or conditions that conflict with those contained in the State of New Jersey Standard Terms and Conditions will render a Quote non-responsive. It is incumbent upon the Bidder to identify and remove its conflicting proposed terms and conditions prior to Quote submission.

Quotes including Bidder proposed additional terms may be accepted, rejected, or negotiated, in whole or in part, at the State’s sole discretion.

If Bidder intends to propose terms and conditions that conflict with the State of New Jersey Standard Terms and Conditions, those Bidder proposed terms and conditions shall only be considered if submitted and agreed to pursuant to the electronic question and answer procedure. Bidders shall not submit exceptions or modifications as part of the Quote or on the “Terms and Conditions” Tab through NJSTART.

QUOTE CONTENT

The Quote should be submitted with the attachments organized in the following manner:

· Forms

· State-Supplied Price Sheet

· Specification Conformance Form – See Bid Solicitation Section 3.21

A Bidder should not password protect any submitted documents. Use of URLs in a Quote should be kept to a minimum and shall not be used to satisfy any material term of a Bid Solicitation. If a preprinted or other document included as part of the Quote contains a URL, a printed copy of the information should be provided and will be considered as part of the Quote.

FORMS, REGISTRATIONS AND CERTIFICATIONS TO BE SUBMITTED WITH QUOTE

A Bidder is required to complete and submit the following forms. As an alternative to uploading certain forms with the submitted Quote, a Bidder may complete several certifications electronically in NJSTART on the “Terms and Categories” Tab within the Vendor Profile. Those forms that may be completed on the NJSTART “Terms and Categories” Tab are noted below. Additionally, a Bidder may attach completed forms to the Vendor Profile. Refer to QRGs “Vendor Forms” and “Attaching Files” for additional instructions. VENDOR QUICK REFERENCE GUIDES

OFFER AND ACCEPTANCE PAGE

The Bidder should complete and submit the Offer and Acceptance Page with the Quote. The Offer and Acceptance Page must be signed by an authorized representative of the Bidder. If a Bidder does not submit the form with the Quote, the Bidder must comply within seven (7) Business Days of the State’s request or the State may deem the Quote non-responsive.

OWNERSHIP DISCLOSURE FORM

Pursuant to N.J.S.A. 52:25-24.2, in the event the Bidder is a corporation, partnership or limited liability company, the Bidder must disclose all 10% or greater owners by (a) completing and submitting the Ownership Disclosure Form with the Quote; (b) if the Bidder has submitted a signed and accurate Ownership Disclosure Form dated and received no more than six (6) months prior to the Quote submission deadline for this procurement, the Division may rely upon that form; however, if there has been a change in ownership within the last six (6) months, a new Ownership Disclosure Form must be completed, signed and submitted with the Quote; or, (c) a Bidder with any direct or indirect parent entity which is publicly traded may submit the name and address of each publicly traded entity and the name and address of each person that holds a 10 percent or greater beneficial interest in the publicly traded entity as of the last annual filing with the federal Securities and Exchange Commission or the foreign equivalent, and, if there is any person that holds a 10 percent or greater beneficial interest, also shall submit links to the websites containing the last annual filings with the federal Securities and Exchange Commission or the foreign equivalent and the relevant page numbers of the filings that contain the information on each person that holds a 10 percent or greater beneficial interest. N.J.S.A. 52:25-24.2.

NOTE: In lieu of completing and submitting the paper-based form, the Bidder has the option to complete this form online in NJSTART on the “Terms and Categories” Tab.

A Bidder’s failure to submit the information required by N.J.S.A. 52:25-24.2 will result in the rejection of the Quote as non-responsive and preclude the award of a Contract to said Bidder.

DISCLOSURE OF INVESTMENT ACTIVITIES IN IRAN FORM

The Bidder should submit Disclosure of Investment Activities in Iran form to certify that, pursuant to N.J.S.A. 52:32-58, neither the Bidder, nor one (1) of its parents, subsidiaries, and/or affiliates (as defined in N.J.S.A. 52:32-56(e)(3)), is listed on the Department of the Treasury’s List of Persons or Entities Engaging in Prohibited Investment Activities in Iran and that neither the Bidder, nor one (1) of its parents, subsidiaries, and/or affiliates, is involved in any of the investment activities set forth in N.J.S.A. 52:32-56(f). If the Bidder is unable to so certify, the Bidder shall provide a detailed and precise description of such activities as directed on the form. If a Bidder does not submit the form with the Quote, the Bidder must comply within seven (7) Business Days of the State’s request or the State may deem the Quote non-responsive.

NOTE: In lieu of completing and submitting the paper-based form, the Bidder has the option to complete this certification online in NJSTART on the “Terms and Categories” Tab.

DISCLOSURE OF INVESTIGATIONS AND OTHER ACTIONS INVOLVING BIDDER FORM

The Bidder should submit the Disclosure of Investigations and Other Actions Involving Bidder Form, with its Quote, to provide a detailed description of any investigation, litigation, including administrative complaints or other administrative proceedings, involving any public sector clients during the past five (5) years, including the nature and status of the investigation, and, for any litigation, the caption of the action, a brief description of the action, the date of inception, current status, and, if applicable, disposition. If a Bidder does not submit the form with the Quote, the Bidder must comply within seven (7) Business Days of the State’s request or the State may deem the Quote non-responsive.

NOTE: In lieu of completing and submitting the paper-based form, the Bidder has the option to complete this certification online in NJSTART on the “Terms and Categories” Tab.

MACBRIDE PRINCIPLES FORM

The Bidder should submit the MacBride Principles Form. Pursuant to N.J.S.A. 52:34-12.2, a Bidder is required to certify that it either has no ongoing business activities in Northern Ireland and does not maintain a physical presence therein or that it will take lawful steps in good faith to conduct any business operations it has in Northern Ireland in accordance with the MacBride principles of nondiscrimination in employment as set forth in N.J.S.A. 52:18A-89.5 and in conformance with the United Kingdom’s Fair Employment (Northern Ireland) Act of 1989, and permit independent monitoring of their compliance with those principles. If a Bidder does not submit the form with the Quote, the Bidder must comply within seven (7) Business Days of the State’s request or the State may deem the Quote non-responsive.

NOTE: In lieu of completing and submitting the paper-based form, the Bidder has the option to complete this certification online in NJSTART on the “Terms and Categories” Tab.

SERVICE PERFORMANCE WITHIN THE UNITED STATES

Not applicable to this procurement.

CONFIDENTIALITY/COMMITMENT TO DEFEND

Pursuant to the New Jersey Open Public Records Act (OPRA), N.J.S.A. 47:1A-1 et seq., or the common law right to know, Quotes can be released to the public in accordance with N.J.A.C. 17:12-1.2(b) and (c).

The Bidder should submit a completed and signed Confidentiality/Commitment to Defend Form with the Quote. In the event that the Bidder does not submit the Confidentiality form with the Quote, the State reserves the right to request that the Bidder submit the form after Quote submission.

After the opening of sealed Quotes, all information submitted by a Bidder in response to a Bid Solicitation is considered public information notwithstanding any disclaimers to the contrary submitted by a Bidder. Proprietary, financial, security and confidential information may be exempt from public disclosure by OPRA and/or the common law when the Bidder has a good faith, legal/factual basis for such assertion.

When the Bid Solicitation contains a negotiation component, the Quote will not be subject to public disclosure until a notice of intent to award a Contract is announced.

As part of its Quote, a Bidder may request that portions of the Quote be exempt from public disclosure under OPRA and/or the common law. The Bidder must provide a detailed statement clearly identifying those sections of the Quote that it claims are exempt from production, and the legal and factual basis that supports said exemption(s) as a matter of law. The State will not honor any attempts by a Bidder to designate its State-Supplied Price Sheet, Price List/Catalog, and/or the entire Quote as proprietary and/or confidential, and/or to claim copyright protection for its entire Quote. If the State does not agree with a Bidder’s designation of proprietary and/or confidential information, the State will use commercially reasonable efforts to advise the Bidder. Copyright law does not prohibit access to a record which is otherwise available under OPRA.

The State reserves the right to make the determination as to what to disclose in response to an OPRA request. Any information that the State determines to be exempt from disclosure under OPRA will be redacted.

In the event of any challenge to the Bidder’s assertion of confidentiality that is contrary to the State’s determination of confidentiality, the Bidder shall be solely responsible for defending its designation, but in doing so, all costs and expenses associated therewith shall be the responsibility of the Bidder. The State assumes no such responsibility or liability.

In order not to delay consideration of the Quote or the State’s response to a request for documents, the State requires that Bidder respond to any request regarding confidentiality markings within the timeframe designated in the State’s correspondence regarding confidentiality. If no response is received by the designated date and time, the State will be permitted to release a copy of the Quote with the State making the determination regarding what may be proprietary or confidential.

SUBCONTRACTOR UTILIZATION PLAN

Bidders intending to use Subcontractor(s) shall list all Subcontractors on the Subcontractor Utilization Plan form or may list the Subcontractor(s) on the “Subcontractor” Tab in NJSTART.

For a Quote that does NOT include the use of any Subcontractors, the Bidder is automatically certifying that, if selected for an award, the Bidder will be performing all work required by the Contract.

If it becomes necessary for the Contractor to substitute a Subcontractor, add a Subcontractor, or substitute its own staff for a Subcontractor, the Contractor will identify the proposed new Subcontractor or staff member(s) and the work to be performed. The Contractor shall forward a written request to substitute or add a Subcontractor or to substitute its own staff for a Subcontractor to the State Contract Manager for consideration. The Contractor must provide a completed Subcontractor Utilization Plan, a detailed justification documenting the necessity for the substitution or addition, and resumes of its proposed replacement staff or of the proposed Subcontractor’s management, supervisory, and other key personnel that demonstrate knowledge, ability and experience relevant to that part of the work which the Subcontractor is to undertake. The qualifications and experience of the replacement(s) must equal or exceed those of similar personnel proposed by the Contractor in its Quote. The State Contract Manager will forward the request to the Director for approval.

NOTE: No substituted or additional Subcontractors are authorized to begin work until the Contractor has received written approval from the Director.

SMALL BUSINESS AND/OR DISABLED VETERANS’ BUSINESS SUBCONTRACTING SET-ASIDE CONTRACT Not applicable to this procurement.

RESERVED

AFFIRMATIVE ACTION

The intended Contractor and its named Subcontractor(s) must submit a copy of a New Jersey Certificate of Employee Information Report, or a copy of Federal Letter of Approval verifying it is operating under a federally approved or sanctioned Affirmative Action program. If the Contractor and/or its named Subcontractor(s) are not in possession of either a New Jersey Certificate of Employee Information Report or a Federal Letter of Approval, it/they must complete and submit the Affirmative Action Employee Information Report (AA-302). Information, instruction and the application are available at https://www.state.nj.us/treasury/contract_compliance/index.shtml.

RESERVED

STATE OF NEW JERSEY SECURITY DUE DILIGENCE THIRD-PARTY INFORMATION SECURITY QUESTIONNAIRE Not applicable to this procurement.

BUSINESS REGISTRATION

In accordance with N.J.S.A. 52:32-44(b), a Bidder and its named Subcontractors must have a valid Business Registration Certificate (“BRC”) issued by the Department of the Treasury, Division of Revenue and Enterprise Services prior to the award of a Contract. A Bidder should verify its Business Registration Certification Active status on the “Maintain Terms and Categories” Tab within its profile in NJSTART. In the event of an issue with a Bidder’s Business Registration Certification Active status, NJSTART provides a link to take corrective action.

The Bidder should submit the Certification of Non-Involvement in Prohibited Activities in Russia or Belarus Form. Pursuant to P.L.2022, c.3, a person or entity seeking to enter into or renew a contract for the provision of goods or services shall certify that it is not Engaging in Prohibited Activities in Russia or Belarus as defined by P.L.2002, c.3, sec. 1(e). If a Bidder does not submit the form with the Quote, the Bidder must comply within seven (7) Business Days of the State’s request or the State may deem the Quote non-responsive.

TECHNICAL QUOTE

Not applicable to this procurement.

BIDDER QUOTE OVERVIEW FORM

Not applicable to this procurement.

BIDDER DATA SHEET/FORM

The Bidder should submit the Bidder Data Sheet with its Quote. The Bidder Data Sheet will be used to evaluate the Bidder’s ability to complete the Scope of Work.

The Bidder should provide in its response to Part I of the Bidder Data Sheet all relevant information regarding its experience in successfully completing contracts of a similar size and scope to the work required by this Bid Solicitation.

The Bidder must provide, in Part II of the Bidder Data Sheet, details of any negative actions taken by other contracting entities against it in the course of performing these projects including, but not limited to, receipt of letters of potential default, default, cure notices, termination of services for cause, or other similar notifications/processes. Additionally, the Bidder should provide details, including any negative audits, reports, or findings by any governmental agency for which the Bidder is/was the contractor on any contracts of similar scope. In the event a Bidder neglects to include this information in its Quote, the Bidder’s omission of necessary disclosure information may be cause for rejection of the Bidder’s Quote by the State.

If proposing to use a Subcontractor, the Bidder should provide as an attachment to the Bidder Data Sheet documented experience to demonstrate that each Subcontractor has successfully performed work on contracts of a similar size and scope to the work that the Subcontractor is designated to perform in the Bidder’s Quote. The Bidder must provide a detailed description of services to be provided by each Subcontractor.

AFFIDAVIT OF APPAREL PRODUCTION

Not applicable to this procurement.

DISCLOSURE OF PRODUCT COMPOSITION

Not applicable to this procurement.

SPECIFICATION DATA SHEETS

Upon the State’s request, Bidders shall submit specification data sheets for each item bid. The specification data sheets must document that its product bid meets or exceeds the requirements of the Bid Solicitation specifications.

The Bidder must provide the requested specification data sheets within 48 hours following a written request from the State. Failure to comply with the written request within the allotted timeframe may result in a Bidder’s Quote non-responsive for the requested item(s).

SAMPLES AND TESTING

Not applicable to this procurement.

SPECIFICATION CONFORMANCE FORM

The Bidder shall submit with its Quote the Specification Conformance Form. By submitting this form, the Bidders certifies that all items offered on the State-Supplied Price Sheet in response to this Bid Solicitation conform to the significant factors and subfactors that establish the requirements of responsiveness set forth in the Bid Solicitation’s Section 4, Scope of Work.

MANUFACTURER’S CERTIFICATION

Upon the State’s request, the Bidder should submit a letter of certification from the manufacturer whose product is supplied, certifying that the Bidder is authorized by the manufacturer to supply the good(s) specified. The certification must indicate that the Bidder was authorized by the manufacturer to supply the good(s) specified as of the Quote Opening Date. The State reserves the right to request such certification and to require that such certification be provided within five (5) Business Days from the time it is requested.

MANUFACTURER’S PUBLISHED LIST OF OPTIONS AND ATTACHMENTS/PRICE LIST

Not applicable to this procurement.

PRICE LIST AND/OR CATALOG

Not applicable to this procurement.

MANAGEMENT OVERVIEW

Not applicable to this procurement.

CONTRACT MANAGEMENT

Not applicable to this procurement.

CONTRACT SCHEDULE

Not applicable to this procurement.

MOBILIZATION PLAN

Not applicable to this procurement.

ADDITIONAL PLAN(S)

Not applicable to this procurement.

ORGANIZATIONAL EXPERIENCE

Not applicable to this procurement.

LOCATION

Not applicable to this procurement.

ORGANIZATION CHARTS

Not applicable to this procurement.

RESUMES

Not applicable to this procurement.

EXPERIENCE WITH CONTRACTS OF SIMILAR SIZE AND SCOPE

Not applicable to this procurement.

FINANCIAL CAPABILITY OF THE BIDDER

Upon the State’s request, the Bidder should provide sufficient financial information to enable the State to assess the financial strength and creditworthiness of the Bidder and its ability to undertake and successfully complete the Contract. In order to provide the State with the ability to evaluate the Bidder’s financial capacity and capability to undertake and successfully complete the Contract, the Bidder should submit the following:

A. For publicly traded companies the Bidder should provide copies or the electronic location of the annual reports filed…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated .