SRC27914._specs_for_Quonset_wiring.pdf
PDF 283 KB Posted
- Attached to
- Conservation/WL/D1-Quonset Hut Wiring
- Solicitation number
- SRC0000027914
- Issued by
- Limestone County, Alabama
About this file
This document is a specification sheet for electrical wiring work at Swan Creek Wildlife Management Area (WMA) in Tanner, Alabama, issued by a state or local government agency. The project involves electrical upgrades to a 120 ft long by 60 ft wide Quonset hut, including installing new circuit breakers for an air compressor and two heaters, re-powering an existing receptacle, and connecting a hot water heater. A mandatory site visit is scheduled for April 9 at 1:00 PM, located at 21453 Harris Station Road, with Jud Easterwood as the point of contact.
The specification requires all supplies and materials to be made in the USA, and vendors must be Buy America, Buy American (BABA) compliant, with a vendor form to be completed and submitted with the bid. The pricing is to include all labor, materials, supplies, and equipment. The document emphasizes specific electrical work requirements, such as installing a 2P60A circuit breaker for the air compressor, 30A 240V heater circuits on the west and east sides, and a 2P30A circuit breaker for the water heater, including verification and potential minor repairs of existing wiring.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| BABA_Requirement_info.pdf | ||
| Quonset_Hut_BABA_form.pdf | ||
| Quick_Quote_Standard_Boilerplate_updated_12.18.2024.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Specs for Quonset Hut Wiring @ SWAN CREEK WMA
Located @ 21453 HARRIS STATION RD., TANNER Alabama 35671
These specs are to run wiring, install new breakers, install electric boxes to run two heaters, and connect a hot water heater to the existing electric line at Quonset hut.
The Quonset hut is 120 ft long and 60 ft wide.
All Supplies and materials used must be made in the USA.
Job includes:
- Furnish / install a new 2P60A circuit breaker for the Air Compressor.
- Furnish / install conduit, wiring, circuit breaker, and receptacle for a 30A 240V heater circuit on west side.
- Furnish / install conduit, wiring, and circuit breaker for a 30A 240V heater circuit on east side.
An existing receptacle will be re-powered.
- Furnish / install a new 2P30A circuit breaker for the water heater. Includes verification that the existing wiring for the water heater is suitable for re-use. Includes minor repair / re�termination if needed.
- Price to include all labor, materials, supplies and equipment
- Vendor must be BABA compliant. There are documents attached to the solicitation explaining
BABA along with a vendor vendor form to be completed. Vendor MUST complete and submit BABA form with bid.
Mandatory Site Visit: April 9 @ 1:00PM
Located @ 21453 HARRIS STATION RD TANNER Alabama 35671
POC for site visit: Jud Easterwood 256-353-2634
File details come from the government source that posted it. Updated .