6111-7900 - ORDERING DATA.pdf
PDF 115 KB Posted
- Attached to
- METAL PLATES
- Solicitation number
- SPMYM226Q7294
About this file
This is a Material Ordering Data sheet for structural steel plate procurement under federal specification MIL-S-22698C. The document specifies the ordering requirements for steel plate material to be supplied to the Defense Logistics Agency (DLA), with identification number N4523A 6111-7900 and ICN 88MSM00000.
The procurement requires two pieces of DH-36 grade steel plate, each measuring 1-1/4 inches thick by 96 inches wide by 20 feet long, with Class U-mill finish (hot rolled or normalized). The material must comply with MIL-S-22698C, Steel Plate, Shapes and Bars, Weldable Ordinary Strength and Higher Strength: Structural, dated 29 June 1988, including all amendments and notices through Notice 3 dated 29 December 2020. Commercial-level preservation, packing, and marking are required, with all unit intermediate and shipping containers marked in accordance with MIL-STD-129 per DLA Procurement Note C20. No first article approval is required, and no deviations from standard dimensional tolerances, chemical composition, surface finish, or ultrasonic testing inspection methods are specified. The document was prepared by the Material and Technical Support division (Code 244.4).
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 6111-7900 CDRL.pdf | ||
| 6106-7906 CDRL.pdf | ||
| Solicitation SPMYM226Q7295.pdf | ||
| 6106-7906 - ORDERING DATA.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
MATERIAL ORDERING DATA
MIL-S-22698
Any specification that is referenced in this Material Order Data sheet is required to be to the latest revision at time of award.
IDN: N4523A 6111-7900
ICN: 88MSM00000 KO: 000 KOI: 000
Paragraph 6.2 Ordering Data
A. MIL-S-22698C, STEEL PLATE, SHAPES AND BARS, WELDABLE ORDINARY STRENGTH AND
HIGHER STRENGTH: STRUCTURAL, dated 29 JUN 1988. AMENDMENT 1, dated 19 DEC 1988.
AMENDMENT 2, dated 20 OCT 1994. NOTICE 1, dated 8 SEP 1998. NOTICE 2, dated 30 AUG 2002.
NOTICE 3, dated 29 DEC 2020.
B. Grade specified: DH-36
C. Class required: Class U-mill finish (hot rolled or normalized)
D. Plate Size: 1-1/4” THK X 96” WD X 20’ LG.
E. When first article is required: no
F. Dimensional tolerances required: N/A
G. When chemical composition is other than specified: N/A
H. When surface finish is other than Class P: Class U
I. Deviations in UT inspection method or UT acceptance criteria from Appendix A of grade T plate, shapes, and bars: N/A
J. Level of preservation, packing, and marking required: Commerical
Additional Data Requirements: QUANTITY REQUIRED: 02 PM
All unit intermediate and shipping containers must be marked in accordance with MIL-STD-
129. Refer to DLA procurement Note C20 for further instructions.
Prepared By: Material and Technical Support Code: 244.4
DJE0078
Cross-Out
File details come from the government source that posted it. Updated .