6106-7906 - ORDERING DATA.pdf
PDF 104 KB Posted
- Attached to
- METAL PLATES
- Solicitation number
- SPMYM226Q7294
About this file
This is a Material Ordering Data sheet for structural steel plate procured under federal specifications. The document specifies the ordering requirements for steel plate conforming to MIL-S-22698C (Steel Plate, Shapes and Bars, Weldable Ordinary Strength and Higher Strength: Structural), including all amendments and notices through December 29, 2020. The material specifications include ABS Grade DH-36 steel with Class U-mill finish (hot rolled or normalized), in plate dimensions of 1-1/2" thickness by 96" width by 33' length, with a total quantity required of 02 PM (presumably pieces or pallets).
Key requirements include no first article inspection mandate, no special dimensional tolerances, Class U surface finish, and commercial-level preservation, packing, and marking standards. All unit, intermediate, and shipping containers must be marked in accordance with MIL-STD-129, with further instructions referenced in DLA Procurement Note C20. The ordering data was prepared by the Material and Technical Support office (Code 244.4) and is identified by IDN N4523A 6106-7906 and ICN 88MSM00001.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 6111-7900 CDRL.pdf | ||
| 6106-7906 CDRL.pdf | ||
| 6111-7900 - ORDERING DATA.pdf | ||
| Solicitation SPMYM226Q7295.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
MATERIAL ORDERING DATA
MIL-S-22698
Any specification that is referenced in this Material Order Data sheet is required to be to the latest revision at time of award.
IDN: N4523A 6106-7906
ICN: 88MSM00001 KO: 000 KOI: 000
Paragraph 6.2 Ordering Data
A. MIL-S-22698C, STEEL PLATE, SHAPES AND BARS, WELDABLE ORDINARY STRENGTH AND
HIGHER STRENGTH: STRUCTURAL, dated 29 JUN 1988. AMENDMENT 1, dated 19 DEC 1988.
AMENDMENT 2, dated 20 OCT 1994. NOTICE 1, dated 8 SEP 1998. NOTICE 2, dated 30 AUG 2002.
NOTICE 3, dated 29 DEC 2020.
B. ABS Grade specified: DH-36
C. Class required: Class U-mill finish (hot rolled or normalized)
D. Plate Size: 1-1/2" X 96" WD X 33' THK.
E. When first article is required: NO
F. Dimensional tolerances required: N/A
G. When chemical composition is other than specified: N/A
H. When surface finish is other than Class P: Class U
I. Deviations in UT inspection method or UT acceptance criteria from Appendix A of grade T plate, shapes, and bars: N/A
J. Level of preservation, packing, and marking required: Commerical
Additional Data Requirements: QUANTITY REQUIRED: 02 PM
In addition to the requirements of this specification all unit, intermediate and shipping containers must be marked in accordance with MIL-STD-129. Refer to DLA Procurement Note C20 for further instructions.
Prepared By: Material and Technical Support Code: 244.4
File details come from the government source that posted it. Updated .