SPI F01-499-8853.pdf

PDF 916 KB Posted May 7, 2021

Attached to: B-2 TLX Kits Federal contract opportunity
Solicitation number: FA821321R3042
Issued by: Department of the Air Force Materiel Command Lifecycle Management Center Hill Air Force Base

About this file

Written by GovTribe AI · Dec 28, 2023

This document provides a Special Packaging Instruction (SPI) for a Parts Kit, Escape System procurement. It specifies packaging and shipping requirements for 103 individual parts to be procured under Solicitation Number FA821321R3042 by the Department of the Air Force Materiel Command Lifecycle Management Center. The SPI outlines Level A and Level B containment and labeling standards according to Military specifications, as well as detailing each of the 103 parts by National Stock Number, specification, vendor part number, configuration, and weight/dimensions. Proper hazardous materials classification and compliance with wood packaging material restrictions are also noted.

View the file

Other files for this federal contract opportunity

Other files attached to B-2 TLX Kits, newest first.
File	Type	Posted
Amend_FA821321R3042_0003.pdf	PDF	Aug 10, 2021
Amend_FA821321R3042_0002.pdf	PDF	Jul 23, 2021
Amend_FA821321R3042_0001.pdf	PDF	Jun 7, 2021
Solicitation_FA821321R3042.pdf	PDF	May 7, 2021
SPI F01-254-8612.pdf	PDF	May 7, 2021
Form 158 FD2020-21-50092.pdf	PDF	May 7, 2021
EDL-Combined.pdf	PDF	May 7, 2021
ES7034 (Attachment 5).pdf	PDF	May 7, 2021
SPI F01-454-8835.pdf	PDF	May 7, 2021
ADC SOW.pdf	PDF	May 7, 2021
SPI F01-461-5515.pdf	PDF	May 7, 2021
TransInstruction11.pdf	PDF	May 7, 2021
REPSHIP.pdf	PDF	May 7, 2021
Packaging SOW.pdf	PDF	May 7, 2021
Engineer Notes Clarification.pdf	PDF	May 7, 2021
EDL_1377014618074.pdf	PDF	May 7, 2021
Bid Sets.pdf	PDF	May 7, 2021
SPI F01-461-5481.pdf	PDF	May 7, 2021
B-2 TLX QALI.pdf	PDF	May 7, 2021
807-Combined 30 Mar 2021.pdf	PDF	May 7, 2021
ID-Combined_30 Mar 2021.pdf	PDF	May 7, 2021
DD Form 1653.pdf	PDF	May 7, 2021
CADPAD Item Marking Instruction.pdf	PDF	May 7, 2021
AIR SPEC 30 Mar 2021.pdf	PDF	May 7, 2021

Show all 24

On GovTribe

Work with this file on GovTribe

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

NOTE: THE ABOVE POP MARKINGS

ARE FOR DOD USE ONLY.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DOD AND U.S. DOD CONTRACTORS ONLY, ADMINISTRATIVE OR OPERATIONAL USE, 06 JULY 2020. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO 406 SCMS/GULAA, (PACKAGING

DIVISION), HILL AFB, UTAH 84056.

DESTRUCTION NOTICE: FOLLOW THE PROCEDURES IN DOD 5220.22-M, NATIONAL INDUSTRIAL SECURITY PROGRAM OPERATING MANUAL (NISPOM), SECTION 5-705, OR DOD 5200.1-R, INFORMATION SECURITY PROGRAM, CHAPTER VI. FOR UNCLASSIFIED, LIMITED DOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.

AutoCAD SHX Text

2169 MOD

AutoCAD SHX Text

FORM

AutoCAD SHX Text

MARCH 87

AutoCAD SHX Text

COMPUTER GENERATED

AutoCAD SHX Text

SPI NO. F01-499-8853

AutoCAD SHX Text

SPECIAL MARKINGS:

AutoCAD SHX Text

A) SPI NO. F01-499-8853

AutoCAD SHX Text

B) PROPER SHIPPING NAME: FUZES, DETONATING

AutoCAD SHX Text

PACKAGING WAS MANUFACTURED.

AutoCAD SHX Text

C) UN POP MARKING:

AutoCAD SHX Text

**THE LAST TWO DIGITS OF THE YEAR DURING WHICH THE

AutoCAD SHX Text

CLOSURE:

AutoCAD SHX Text

LEVEL B:

AutoCAD SHX Text

LEVEL A:

AutoCAD SHX Text

USA/DOD/AF70

AutoCAD SHX Text n

AutoCAD SHX Text 4G/Y19/S/**

AutoCAD SHX Text

UN0367

AutoCAD SHX Text u

AutoCAD SHX Text

PART OR DRAWING NO.

AutoCAD SHX Text

SPECIAL PACKAGING INSTRUCTION

AutoCAD SHX Text

ITEM NOMENCLATURE

AutoCAD SHX Text

MILITARY PRESERVATION IAW MIL-STD-2073

AutoCAD SHX Text

PRESERVATIVE: N/A

AutoCAD SHX Text

CLEANING & DRYING: IAW MIL-STD-2073

AutoCAD SHX Text

MARKING IAW MIL-STD-129

AutoCAD SHX Text

UNSERVICEABLE METHOD: 41

AutoCAD SHX Text

QUP

AutoCAD SHX Text

ICQ

AutoCAD SHX Text

MULTIPLE PART NUMBERS

AutoCAD SHX Text

ORIGINAL

AutoCAD SHX Text

PARTS KIT, ESCAPE SYSTEM

AutoCAD SHX Text 07157

AutoCAD SHX Text

DATE

AutoCAD SHX Text

AUTH.

AutoCAD SHX Text

CHK.

AutoCAD SHX Text

1377-01-499-8853 ES

AutoCAD SHX Text

NATIONAL STOCK NO.

AutoCAD SHX Text

CURRENT

AutoCAD SHX Text

REV

AutoCAD SHX Text P.S.

AutoCAD SHX Text

ILL.

AutoCAD SHX Text 98747

AutoCAD SHX Text

CODE ID

AutoCAD SHX Text

DODPOPHM/USA/DOD/AF70/TR07006

AutoCAD SHX Text

SHEET 1 OF 6

AutoCAD SHX Text

SPI NO. (TPO)

AutoCAD SHX Text A

AutoCAD SHX Text

SEE NOTICE 1

AutoCAD SHX Text

LEVEL A LEVEL B

AutoCAD SHX Text

SEE NOTICE 1

AutoCAD SHX Text

SEE NOTICE 1

AutoCAD SHX Text

LENGTH WIDTH DEPTH

AutoCAD SHX Text

VARIES

AutoCAD SHX Text 24 3/8

AutoCAD SHX Text

SEE NOTICE 1

AutoCAD SHX Text

AS SPECIFIED BELOW AND BILL OF MATERIALS

AutoCAD SHX Text

SPEC STYLE TYPE CL VRTY GR TR

AutoCAD SHX Text

REVISIONS

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

VARIES

AutoCAD SHX Text

CNTR I.D.

AutoCAD SHX Text

LTR

AutoCAD SHX Text

ITEM DIM

AutoCAD SHX Text

ITEM WT.

AutoCAD SHX Text

LEVEL A:

AutoCAD SHX Text

LEVEL B:

AutoCAD SHX Text

CNTR O.D.

AutoCAD SHX Text

LEVEL A:

AutoCAD SHX Text

LEVEL B:

AutoCAD SHX Text

GROSS CU FT

AutoCAD SHX Text

GROSS WT LBS

AutoCAD SHX Text

DESIGN FRAGILITY G

AutoCAD SHX Text

ASTM D6251

AutoCAD SHX Text

ASTM D5118

AutoCAD SHX Text

LEVEL

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text

PACKING

AutoCAD SHX Text

DATE

AutoCAD SHX Text 24 3/8

AutoCAD SHX Text

AutoCAD SHX Text 24 3/4

AutoCAD SHX Text

AutoCAD SHX Text 11.948

AutoCAD SHX Text

K. KNIGHTON W. MONSON J. BURLEIGH N. CORONADO

AutoCAD SHX Text F01-499-8853

AutoCAD SHX Text

D) REUSABLE CONTAINER & DUNNAGE DO NOT DESTROY.

AutoCAD SHX Text

RSC

AutoCAD SHX Text

III

AutoCAD SHX Text

AutoCAD SHX Text B

AutoCAD SHX Text V3c

AutoCAD SHX Text B

AutoCAD SHX Text

IAW: ASTM D1974 SEALING METHOD C

AutoCAD SHX Text

IAW: ASTM D6251

AutoCAD SHX Text

MARK THE SPI NUMBER ON THE IDENTIFICATION SIDE OF CONTAINER.

AutoCAD SHX Text

SERVICEABLE METHOD: 41

AutoCAD SHX Text B

AutoCAD SHX Text

ADDED DISTRIBUTION STATEMENT AND DESTRUCTION NOTICE

AutoCAD SHX Text 20192

AutoCAD SHX Text

MARCH 87

AutoCAD SHX Text

2169C MOD

AutoCAD SHX Text

FORM

AutoCAD SHX Text

COMPUTER GENERATED

AutoCAD SHX Text

SPECIAL PACKAGING INSTRUCTION

AutoCAD SHX Text

ITEM NOMENCLATURE

AutoCAD SHX Text 98747

AutoCAD SHX Text

CODE ID

AutoCAD SHX Text

SHEET 2 OF 6

AutoCAD SHX Text

SPI NO. (TPO)

AutoCAD SHX Text

REQD

AutoCAD SHX Text P/N

AutoCAD SHX Text

QTY

AutoCAD SHX Text SIZE: (INCHES UNLESS SPECIFIED) TOLERANCES ON FRAC. ± , 18, DECIMAL ± .10, ANGLES ± 1°

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

NOMENCLATURE OR

AutoCAD SHX Text

SPECIFICATION

AutoCAD SHX Text

MATERIAL

AutoCAD SHX Text A/R A/R A/R A/R

AutoCAD SHX Text

TAPE, PACKAGING WRAP BAG, BARRIER CUSHIONING

AutoCAD SHX Text

3 X AS REQUIRED AS REQUIRED AS REQUIRED AS REQUIRED

AutoCAD SHX Text ASTM D5486 TYPE I OR V A-A-203 OR A-A-1898 GRADE I MIL-DTL-117 TYPE I, CLASS F, STYLE 1 A-A-59135 CLASS 1, GRADE B

AutoCAD SHX Text -4 -3 -2 -1

AutoCAD SHX Text

PARTS KIT, ESCAPE SYSTEM

AutoCAD SHX Text F01-499-8853

AutoCAD SHX Text

NOTES

1. WRAP ITEM USING REF.-3, PLACE IN BARRIER BAG REF.-2, REMOVE AIR AND SEAL.

2. PLACE ITEMS IN CONTAINER USING REF.-1 TO ENSURE A SNUG FIT. USE PACKAGING TAPE REF.-4 TO SEAL.

3. KIT CONTAINS 103 LINES, SEE TABLE.

MUNITION NOTICES

NOTICE 1: FOR LEVEL A PACKING REQUIREMENTS: THE LEVEL B PACKS SHALL BE OVERBOXED IN A LEVEL A SPECIFIED

CONTAINER SHOWN ON PAGE 1 UNDER PACKAGING LEVEL A. MARK THE OUTSIDE OF THE OVERBOX "OVERPACK." THE

SIZE AND WEIGHT OF THE OVERBOX WILL VARY DEPENDING ON THE NUMBER OF ITEMS BEING SHIPPED. USE FILLER

PAD OF ASTM D4727, CF, DOM, GR 275 (OR EQUAL) TO ENSURE A TIGHT FIT IN THE OVERBOX.

NOTICE 2: LEVEL A PROTECTION REQUIRED TO MEET THE MOST SEVERE WORLDWIDE SHIPMENT, HANDLING, AND

STORAGE CONDITIONS. EXAMPLES OF SITUATIONS ARE: WAR RESERVE MATERIAL, MOBILIZATION, STRATEGIC AND

THEATER DEPLOYMENT, OPEN STORAGE AND DECK LOADING. SECURITY ASSISTANCE ITEMS, INCLUDING FMS, ARE

ESPECIALLY SUSCEPTIBLE TO DAMAGE DUE TO UNKNOWN AND UNFAVORABLE TRANSPORTATION, CLIMATIC, AND

STORAGE CONDITIONS. PROVIDE LEVEL B PACKING UNLESS OTHERWISE DIRECTED BY THE PROCURING COUNTRY.

NOTICE 3: ASSETS PACKAGED IN ACCORDANCE WITH PREVIOUS EDITIONS OF THIS SPI DO NOT REQUIRE REPACKAGING

IF THE INTEGRITY OF THE SPI IS MAINTAINED.

NOTICE 4: SEE SPIRES FOR A COMPLETE LISTING OF NSN's ASSIGNED TO THIS SPI.

NOTICE 5: THIS SPI IS NOT AUTHORIZED FOR USE WITHOUT PROPER HAZARD CLASSIFICATION. UNLESS A FINAL

HAZARD CLASSIFICATION HAS BEEN ISSUED, A COPY OF THE VALID INTERIM HAZARD CLASSIFICATION LETTER ALONG

WITH DOT SP 15448 MUST ACCOMPANY EACH SHIPMENT.

NOTICE 6: PALLETIZATION AND UNIT LOADS SHALL BE IAW MIL-STD-1660 FOR AMMUNITION AND EXPLOSIVES.

INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES

REVISION OF ISPM NO. 15

REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE

THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD

PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE

PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND

COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE

(DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).

WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:

ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD

PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF

HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).

CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS

COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR

PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."

AutoCAD SHX Text

2169C MOD

AutoCAD SHX Text

MARCH 87

AutoCAD SHX Text

FORM

AutoCAD SHX Text

COMPUTER GENERATED

AutoCAD SHX Text

SPECIAL PACKAGING INSTRUCTION

AutoCAD SHX Text

SPI NO. (TPO)

AutoCAD SHX Text

SHEET 3 OF 6

AutoCAD SHX Text

ITEM NOMENCLATURE

AutoCAD SHX Text 98747

AutoCAD SHX Text

CODE ID

AutoCAD SHX Text

PARTS KIT, ESCAPE SYSTEM

F01-499-8853

1377-01-461-6043

DAA3294P340-001 52171-001

7/16LE X 3/8HE-NS

.10 27.9 X .2 X .2

.03 10 X .2 X .2

.10 55.8 X .2 X .2

.13 74.5 X .2 X .2

.09 37.4 X .2 X .2

.07 26.2 X .2 X .2

.12 66.5 X .2 X .2

.03 13.6 X .2 X .2

.17 85 X .2 X .2

.03 10.5 X .2 X .2

SPEC

PART NUMBER

VENDOR

PART

NUMBER

NEW NSN

END TIP

CONFIGURATION QPA WT/DIMENSION

1377-01-461-6045

DAA3294P340-002 52170-002

1377-01-461-6028

DAA3294P340-005 52170-005

1377-01-461-6032

DAA3294P340-006 52170-006

1377-01-461-6040

DAA3294P340-007 52171-007

1377-01-461-6039

DAA3294P340-010 52170-010

1377-01-461-6033

DAA3294P340-011 52170-011

1377-01-461-6034

DAA3294P340-012 52170-012

1377-01-461-6038

DAA3294P340-013 52170-013

1377-01-461-6036

DAA3294P340-014 52170-014

1377-01-461-6030

DAA3294P340-015 52170-015

1377-01-461-6031

DAA3294P340-016 52170-016

1377-01-461-5147

DAA3294P340-017 52170-017

1377-01-461-5537

DAA3294P340-020 52170-020

1377-01-461-5530

DAA3294P340-021 52171-021

1377-01-461-9135

DAA3294P340-023 52170-023

1377-01-461-5529

DAA3294P340-024 52171-024

1377-01-461-5518

DAA3294P340-025 52170-025

1377-01-461-5535

DAA3294P340-026 52170-026

1377-01-461-5520

DAA3294P340-027 52170-027

1377-01-461-5523

DAA3294P340-028 52170-028

1377-01-454-8835

DAA3294P340-032 52170-032

1377-01-461-8068

DAA3294P340-033 52170-033

1377-01-454-8826

DAA3294P340-035 52170-035

1377-01-461-8075

DAA3294P340-036 52170-036

1377-01-461-8080

DAA3294P340-038 52170-038

1377-01-461-8071

DAA3294P340-039 52170-039

1377-01-454-8822

DAA3294P340-040 52170-040

1377-01-461-8078

DAA3294P340-041 52170-041

1377-01-461-8070

DAA3294P340-042 52170-042

1377-01-454-8827

DAA3294P340-043 52170-043

1377-01-461-8069

DAA3294P340-044 52170-044

1377-01-461-8074

DAA3294P340-048 52170-048

1377-01-461-6046

DAA3294P340-053 52170-053

1377-01-461-5484

DAA3294P340-055 52170-055

1377-01-461-6042

DAA3294P340-057 52170-057

1377-01-461-8077

DAA3294P340-058 52170-058

1377-01-454-8836

DAA3294P340-060 52170-060

1377-01-454-8829

DAA3294P340-062 52170-062

1377-01-454-8828

DAA3294P340-063 52170-063

1377-01-454-8831

DAA3294P340-064 52170-064

1377-01-461-8308

DAA3294P340-067 52170-067

1377-01-461-8313

DAA3294P340-068 52170-068

1377-01-462-2328

DAA3294P340-070 52170-070

1377-01-461-8315

DAA3294P340-071 52170-071

1377-01-461-8082

DAA3294P340-072 52170-072

1377-01-461-8839

DAA3294P340-073 52170-073

1377-01-461-8066

DAA3294P340-074 52170-074

1377-01-461-8064

DAA3294P340-075 52170-075

1377-01-461-8319

DAA3294P340-076 52170-076

1377-01-461-8081

DAA3294P340-078 52170-078

1377-01-461-8304

DAA3294P340-080 52170-080

1377-01-461-8305

DAA3294P340-081 52170-081

1377-01-461-8079

DAA3294P340-082 52170-082

3/8LE X 7/16LE

3/8LE X 3/8LE

7/16LE X 3/8HE-NS

3/8LE X 7/16LE

3/8LE X 1/2HE

3/8LE X 3/8LE

7/16LE X 1/2LE

7/16LE X 3/8HE-NS

3/8LE X 7/16LE

3/8LE X 3/8LE

3/8LE X 7/16LE

3/8LE X 3/8LE

3/8LE X 1/2LE

3/8LE X 7/16LE

3/8LE X 3/8LE

7/16LE X 3/8HE-NS

3/8LE X 7/16LE

3/8LE X 3/8LE

3/8LE X 1/2HE

3/8LE X 3/8LE

1/2LE X 1/2LE

3/8LE X 7/16LE

3/8LE X 3/8LE

3/8LE X 1/2LE

3/8LE X 3/8LE

3/8LE X 1/2LE

3/8LE X 3/8LE

3/8LE X 7/16LE

3/8LE X 3/8LE

3/8LE X 7/16LE

3/8LE X 1/2LE

3/8LE X 3/8LE

3/8LE X 1/2LE

3/8LE X 3/8LE

3/8LE X 7/16LE

.12 66.9 X .2 X .2

.03 7.1 X .2 X .2

.03 14.2 X .2 X .2

.06 69.9 X .2 X .2

.09 39.5 X .2 X .2

.16 92.9 X .2 X .2

.08 34.4 X .2 X .2

.13 70.1 X .2 X .2

.05 21.1 X .2 X .2

.10 49.8 X .2 X .2

.13 78.8 X .2 X .2

.18 97 X .2 X .2

.06 29.9 X .2 X .2

.17 95.2 X .2 X .2

.02 7.5 X .2 X .2

.09 32.6 X .2 X .2

.04 19 .9 X .2 X .2

.17 102.3 X .2 X .2

.04 9.3 X .2 X .2

.07 36.5 X .2 X .2

.19 113 X .2 X .2

.04 16.5 X .2 X .2

.02 5.4 X .2 X .2

.06 33.1 X .2 X .2

.03 12.5 X .2 X .2

.03 7.7 X .2 X .2

.03 11 X .2 X .2

.15 88.9 X .2 X .2

.19 118.3 X .2 X .2

.28 168.5 X .2 X .2

.10 56.9 X .2 X .2

.03 8.5 X .2 X .2

.03 5.3 X .2 X .2

.25 151.3 X .2 X .2

.14 81.9 X .2 X .2

.07 31.8 X .2 X .2

.11 52.2 X .2 X .2

.04 9.3 X .2 X .2

.09 39.5 X .2 X .2

.28 166.4 X .2 X .2

.05 69 X .2 X .2

.03 8.2 X .2 X .2

.14 X 73.3 X .2 X .2

.03 6.5 X .2 X .2

AutoCAD SHX Text

2169C MOD

AutoCAD SHX Text

MARCH 87

AutoCAD SHX Text

FORM

AutoCAD SHX Text

COMPUTER GENERATED

AutoCAD SHX Text

SPECIAL PACKAGING INSTRUCTION

AutoCAD SHX Text

SPI NO. (TPO)

AutoCAD SHX Text

SHEET 4 OF 6

AutoCAD SHX Text

ITEM NOMENCLATURE

AutoCAD SHX Text 98747

AutoCAD SHX Text

CODE ID

AutoCAD SHX Text

PARTS KIT, ESCAPE SYSTEM

1377-01-461-5486

DAA3294P340-086 52170-086 2

.03 8.5 X .2 X .2

.04 15.5 X .2 X .2

.11 15 X .2 X .2

.03 9.5 X .2 X .2

.13 64 X .2 X .2

.13 58 X .2 X .2

.03 14 X .2 X .2

.15 72 X .2 X .2

.03 39 X .2 X .2

SPEC

PART NUMBER

VENDOR

PART

NUMBER

NEW NSN

END TIP

CONFIGURATION QPA NOTES

1377-01-461-5489

DAA3294P340-090 52170-090

1377-01-461-5538

DAA3294P340-091 52170-091

1377-01-464-2279

DAA3294P340-093 52170-093

1377-01-463-0549

DAA3294P340-094 52171-094

1377-01-463-0548

DAA3294P340-095 52171-095

1377-01-463-1654

DAA3294P340-096 52170-096

1377-01-463-0547

DAA3294P340-097 52171-097

1377-01-461-5517

DAA3294P340-098 52170-098

3/8LE X 3/8LE

3/8LE X 7/16HE-NS

3/8LE X 1/2HE-NS

3/8LE X 3/8LE

3/8LE X 1/2HE-NS

3/8LE X 3/8LE

Total # lines per Kit

(Continued from previous page)

AutoCAD SHX Text

2169C MOD

AutoCAD SHX Text

MARCH 87

AutoCAD SHX Text

FORM

AutoCAD SHX Text

COMPUTER GENERATED

AutoCAD SHX Text

SPECIAL PACKAGING INSTRUCTION

AutoCAD SHX Text

SPI NO. (TPO)

AutoCAD SHX Text

SHEET 5 OF 6

AutoCAD SHX Text

ITEM NOMENCLATURE

AutoCAD SHX Text 98747

AutoCAD SHX Text

CODE ID

ITEM REFERENCE

AutoCAD SHX Text

2169C MOD

AutoCAD SHX Text

MARCH 87

AutoCAD SHX Text

FORM

AutoCAD SHX Text

COMPUTER GENERATED

AutoCAD SHX Text

SPECIAL PACKAGING INSTRUCTION

AutoCAD SHX Text

SPI NO. (TPO)

AutoCAD SHX Text

SHEET 6 OF 6

AutoCAD SHX Text

ITEM NOMENCLATURE

AutoCAD SHX Text 98747

AutoCAD SHX Text

CODE ID

AutoCAD SHX Text F01-499-8853

AutoCAD SHX Text

Sheets and Views

014998853-SHEET 01

014998853-SHEET 02

014998853-SHEET 03

014998853-SHEET 04

014998853-SHEET 05

014998853-SHEET 06

File details come from the government source that posted it. Updated May 7, 2021.