SPI APG_68_PSP.PDF
PDF 362 KB Posted
- Attached to
- Manufacture F-16 Shipping Containers
- Solicitation number
- ID07200042
About this file
This solicitation requests quotes for the manufacture of F-16 shipping containers in accordance with the attached Statement of Work. The General Services Administration Federal Acquisition Service Assisted Acquisition Services Region 7 is seeking these containers to securely transport F-16 aircraft parts. Interested small businesses must register in the IT Solution Shop system by June 22nd in order to receive the solicitation and submit a proposal, with proposals due by July 6th at 2pm Central Time. The North American Industry Classification System code for this procurement is 488991 and it has a 100% small business set-aside designation. All proposals must be submitted through the IT Solution Shop ordering system and any questions are to be sent to the contracting officer by June 17th.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| ID07200042 RFQ COVER LETTER.pdf | ||
| SPI APG_68_MLPRF.PDF | ||
| ID07200042 RFQ F-16 Containers.pdf | ||
| ID07200042 SOW F16 Containers Final 05262020.pdf | ||
| SPI Antenna.PDF | ||
| SPI APG_68_DMT.PDF |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DOD AND U.S. DOD CONTRACTORS ONLY, ADMINISTRATIVE OR OPERATIONAL USE, 19 DECEMBER 2017. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO 406 SCMS/GULAA, (PACKAGING
DIVISION), HILL AFB, UTAH 84056.
DESTRUCTION NOTICE: FOLLOW THE PROCEDURES IN DOD 5220.22-M, NATIONAL INDUSTRIAL SECURITY PROGRAM OPERATING MANUAL (NISPOM), SECTION 5-705, OR DOD 5200.1-R, INFORMATION SECURITY PROGRAM, CHAPTER VI. FOR UNCLASSIFIED, LIMITED DOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.
CAUTION NOTICES
NOTES
1. USE ADHESIVE A-A-59692, TYPE II, TO BOND REF.-6 TO REF.-7 AND CUT OUT AS ILLUSTRATED IN DETAIL A.
2. BLUNT CORNERS OF INNER CONTAINER, REF.-5, TO PREVENT PUNCTURING OF BARRIER BAG, REF.-4.
3. PLACE BOTTOM FEET INTO CUTOUTS PROVIDED FOR IN REF.-6 & -7; ENSURE ITEM SITS FLUSH AGAINST BOTTOM.
4. USE LABEL AS SHOWN IN DETAIL C.
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD
PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE
PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND
COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE
(DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD
PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF
HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS
COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR
PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
File details come from the government source that posted it. Updated .