Tech_data_PGC04187_Feb_2018.pdf

PR REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF PAGES

PGC 04187 JERSEY, FLIGHT DECK, FLAME RESISTANT

Color Size NSN UPC White Small 8415-01-657-8326 718020724966 White Medium 8415-01-657-8344 718020616599 White Large 8415-01-657-8428 718020865225 White X-Large 8415-01-657-8456 718020668413 Blue Small 8415-01-657-8469 718020619408 Blue Medium 8415-01-657-8483 718020908557 Blue Large 8415-01-657-8498 718020693156 Blue X-Large 8415-01-657-8501 718020716459 Green Small 8415-01-657-8583 718020694061 Green Medium 8415-01-657-8600 718020794648 Green Large 8415-01-657-8603 718020851525 Green X-Large 8415-01-657-8609 718020604183 Yellow Small 8415-01-657-8610 718020853178 Yellow Medium 8415-01-657-8611 718020923338 Yellow Large 8415-01-657-8614 718020797915 Yellow X-Large 8415-01-657-8619 718020954615 Brown Small 8415-01-657-8650 718020933092 Brown Medium 8415-01-657-8651 718020927015 Brown Large 8415-01-657-8655 718020690384 Brown X-Large 8415-01-657-8658 718020925301 Purple Small 8415-01-657-8699 718020883779 Purple Medium 8415-01-657-8705 718020729213 Purple Large 8415-01-657-8708 718020774015 Purple X-Large 8415-01-657-8711 718020614915 Red Small 8415-01-657-8715 718020611211 Red Medium 8415-01-657-8744 718020661551 Red Large 8415-01-657-8746 718020776842 Red X-Large 8415-01-657-8750 718020961903

Jersey, Flight Deck, Flame Resistant Shall Be Made In Accordance With:

NAWC-PD-4672-14-06, Dated 04 DEC 2014

Cloth, Knit, Flame Resistant Shall Be Made In Accordance With: NAWC PD 4672-14-05 dated 18 November 2014.

Source of Supply Drawings:

DRW-1774AS641 Rev B KNIT NON RIB DRW-1774AS642 Rev B KNIT RIB

Pattern Date: 11 April 2016

Shade:

Class 1 – White, AMS-STD-595/37925, Miscellaneous, Flat or Lusterless Class 2 – Blue, AMS-STD-595/35095, Blue, Flat or Lusterless Class 3 – Green, AMS-STD-595/14193, Green, Gloss Class 4 – Yellow, AMS-STD-595/33655, Yellow, Flat or Lusterless Class 5 – Brown, AMS-STD-595/30108, Brown, Flat or Lusterless Class 6 – Purple, AMS-STD-595/37100, Miscellaneous, Flat or Lusterless Class 7 – Red, AMS-STD-595/31350, Red, Flat or Lusterless

INTERIM CHANGES TO NAWC-PD-4672-14-06:

2.2.1, FEDERAL STANDARD, delete and substitute:

“FEDERAL STANDARD

FED-STD-4 - Glossary of Fabric Imperfections”.

2.3, At end of section, add new entry:

“SAE INTERNATIONAL

AMS-STD-595 - Colors Used in Government Procurement

(Copies of this document are available online at https://www.sae.org). or SAE International, 1200 G Street, NW, Suite 800, Washington, DC 20005)”.

3.4, Line 1, delete “FED-STD-595” and substitute “AMS-STD-595”.

3.5.1, Line 10, after “Name of Contractor…(Example)” insert below on next line “Lot Number: 2A (Example)”.

INTERIM CHANGES TO NAWC PD 4672-14-05:

2.2.1, FEDERAL STANDARD, delete and substitute:

“FEDERAL STANDARD

FED-STD-4 - Glossary of Fabric Imperfections”.

2.3, SEARS ROEBUCK AND COMPANY, delete entry in its entirety.

At end of section, add new entry:

“SAE INTERNATIONAL

AMS-STD-595 - Colors Used in Government Procurement

(Copies of this document are available online at https://www.sae.org). or SAE International, 1200 G Street, NW, Suite 800, Washington, DC 20005)”.

3.4, Line 1, delete “FED-STD-595” and substitute “AMS-STD-595”.

4.5.1, Lines 3, 4 and 5, delete “except that only those slubs and knots which exceed the limits show on Sears Fabric Defect Scale, “D” or “3-1/2” for slubs and “C” for knots”

6.2, Line 2, delete “Title, number and date of this specification” and substitute “Title, number and date of this purchase description, and drawings cited under this purchase description”.

6.3, delete in its entirety.

MIL-DTL-32075: LABEL FOR CLOTHING, EQUIPAGE,

AND TENTAGE, GENERAL USE REPLACES DDD-L-20

(Ref. T0451 - June 19, 2007)

INTERIM SPECIFICATION CHANGES TO MIL-DTL-32075:

PAGE 4, PARA. 3.3.5, AFTER "TYPE III OR IV, CLASS 4 OF" DELETE "DDD-L-20" AND REPLACE "MIL-DTL- 32075,".

PAGE 6, TABLE I, "PHYSICAL REQUIREMENTS OF THE

TYPE VI FINISHED LABEL." UNDER "TEARING

STRENGTH" DELETE: "(LB.) MINIMUM" AND

SUBSTITUTE: "(GNS) MINIMUM."

PAGE 12, PARA 3.3.2.17, AFTER "NSN" ADD

"AND THE UNIVERSAL PRODUCT CODE (UPC)

SUPPLIED BY THE GOVERNMENT, FOR ALL NSNs."

ADDITIONAL INFORMATION FOR A-A-55195:

INTERIM STANDARD FOR FOLIAGE GREEN 504 IS

IDENTIFIED AS ROLL #3721, AND IS REFERENCED

FOR SHADE ONLY.

THREAD, ARAMID, SPUN STAPLE, A-A-55217B, DATED 29 MARCH 2011

ADDITIONAL INFORMATION FOR A-A-55217

STANDARD SAMPLE FOR FOLIAGE GREEN 504 IS MIL-C-44436,

ROLL #3728, (THE FOLIAGE GREEN 502 AREA OF THE PATTERN)

AND REFERENCE FOR SHADE ONLY.

ADDITIONAL INFO FOR FED-STD-4 GLOSSARY OF FABRIC IMPERFECTIONS:

REVISION B: 7/29/64; AMENDMENT 2: 9/12/75

NOTICE 1, DATED 10/1/87.

DEV. TO FED. STD. 4B & AM. 2, PAGE 2, SEC.I. PARA. 2.1. IN IMPERFECTION

COMMERCIAL TERMINOLOGY AND GLOSSARY NO. COLUMNS, AFTER SHADE

BAR - 14 INSERT: "SHADED CLOTH-61B".

PAGE 8 PARA. 3.4, GLOSSARY NO. "61A- OFF SHADE", IN "DEFINITION" COLUMN,

DELETE ":SHADED SIDE TO SIDE, SIDE TO CENTER OR END TO END". ADD NEW

GLOSSARY NO. "SHADED CLOTH "61B-SHADED CLOTH (SHADED SIDE TO SIDE, SIDE

TO CENTER OR END TO END) WITH THE FOLLOWING DEFINITION: "COLOR

DIFFERENCE BETWEEN THE RESPECTIVE CLOTH AREAS".

PAGE 22, SECTION III, PARAGRAPH 2.1, IN "IMPERFECTION COMMERCIAL

TERMINOLOGY" AND GLOSSARY NO." COLUMNS, AFTER "SHADE BAR-15" INSERT:

"SHADED CLOTH - 62A"

PAGE 27, PARAGRAPH 3.4, GLOSSARY NO. "62-OFF SHADE" IN "DEFINITION"

COLUMN DELETE: "SHADED SIDE TO SIDE, SIDE TO CENTER OR END TO END".

ADD NEW GLOSSARY NO, "62A-SHADED CLOTH (SHADED SIDE TO SIDE, SIDE TO

CENTER OR END TO END)" WITH THE FOLLOWING DEFINITION: "COLOR DIFFERENCE

BETWEEN THE RESPECTIVE CLOTH AREAS."

DEVIATION FROM FED. STD. 4B, AND AMEND 2:

PG 2, SECTION 1, PARA.2.1, IN "IMPERFECTION COMMERCIAL TERMINOLOGY" AND

"GLOSSARY NUMBER" COLUMNS, AFTER "SHADE BAR-14",INSERT: "SHADED CLOTH

61B".

PG 8, PARA.3.4, GLOSSARY NUMBER "61A-OFF SHADE" IN "DEFINITION" COLUMN,

DELETE, "SHADED SIDE TO SIDE, SIDE TO CENTER OR END TO END". ADD NEW

GLOSSARY NO."61B SHADED CLOTH "SHADED SIDE TO SIDE, SIDE TO CENTER OR

END TO END" WITH THE FOLLOWING DEFINITION; "COLOR DIFFERENCE BETWEEN THE

RESPECTIVE CLOTH AREAS."

PAGE 22, SECTION III, PARAGRAPH 2.1, IN "IMPERFECTION COMMERCIAL

TERMINOLOGY" AN GLOSSARY NO." COLUMNS, AFTER "SHADE BAR-15"

INSERT: "SHADED CLOTH - 62A"

PAGE 27, PARAGRAPH 3.4, GLOSSARY NO "62-OFF SHADE" IN "DEFINITION"

COLUMN DELETE: "SHADED SIDE TO SIDE, SIDE TO CENTER OR END TO END".

ADD NEW GLOSSARY NO, "62A-SHADED CLOTH (SHADED SIDE TO SIDE, SIDE TO

CENTER OR END TO END)" WITH THE FOLLOWING DEFINITION: "COLOR DIFFERENCE

BETWEEN THE RESPECTIVE CLOTH AREAS."

Ref. T0202 - 04/04/07)

ADDITIONAL INFORMATION FOR ANSI/ASQC Z1.4:

NOTE: THE MOST RECENT VERSION OF THIS DOCUMENT SHOULD BE USED.

APPLICATION FOR COPIES SHOULD BE ADDRESSED TO:

AMERICAN SOCIETY FOR QUALITY

600 NORTH PLANKINTON AVENUE

MILWAUKEE, WISCONSIN 53203

(Ref. T0795 - May 17, 2006)

The Inspection Level shall be General Inspection Level II with an Acceptable Quality Level (AQL) of 4.0 for major defects, 6.5 for minor defects, and 10.0 for combined Major and Minor defects.

PACKAGING

THE JERSEYS SHALL BE PACKAGED IN ACCORDANCE WITH MIL-PRF-121G BARRIER MATERIALS, GREASEPROOF;

WATERPROOF FLEXIBLE, HEAT SEALABLE

MIL-STD-129R - DEPARTMENT OF DEFENSE STANDARD PRACTICE

- MILITARY MARKING FOR SHIPMENT AND STORAGE

DATED 18 FEBRUARY 2014

INTERIM CHANGES:

OMISSION OF MARKINGS ON EXTERIOR SHIPPING CONTAINERS OF ITEMS

IN THE DLA TROOP SUPPORT CLOTHING AND TEXTILE (C&T) DIRECTORATE:

THE NOMENCLATURE AND MANUFACTURER'S NAME (WHEN THE NAME IDENTIFIES THE MATERIAL) SHALL BE OMITTED FROM ALL EXTERIOR SHIPPING CONTAINERS OF DLA TROOP SUPPORT C&T ITEMS, REGARDLESS OF

MODE OF SHIPMENT.

IF THE MANUFACTURER'S NAME DOES NOT IDENTIFY THE MATERIAL AS BEING CLOTHING, IT MAY REMAIN.

NSNS SHALL BE SHOWN ON ALL SHIPPING CONTAINERS OF C&T ITEMS, THE PACKING LIST SHALL BE PLACED INSIDE THE LAST CONTAINER TO BE LOADED FOR EACH SHIPMENT. THE WORDS "PACKING LIST HERE" SHALL

BE STENCILED, NOT HAND LETTERED, ON THE CONTAINER.

THE PRESERVATION,PACKAGING,PACKING AND MARKING,

FOR THIS ITEM,EQUIPMENT OR SUPPLIES,SHALL BE

ACCOMPLISHED UNDER THE REQUIREMENTS OF THE

LATEST REVISION OF ASTM-D-3951.

Packaging examination. The fully packaged end item shall be examined for the defects listed below. The lot size shall be expressed in units of shipping containers. The sample unit shall be one shipping container fully packaged. The Inspection level shall be S-2 and the AQL, expressed in terms of defects per hundred units, shall be 2.5.

Examine Defect

Marking Omitted; incorrect; illegible, of (exterior) improper size, location, sequence & Unit Pack, or method of application.

Materials Any component missing, damaged or not as specified.

Workmanship Inadequate application of components, such as: incomplete closure of container flaps, loose strapping, improper taping, or inadequate stapling. Bulged or distorted container.

Contents Number of intermediate containers per shipping container is more or less than required.

Number of items per container is more or less than required.

Palletization examination. The fully packaged and palletized end items shall be examined for the defects listed below. The lot size shall be expressed in units of palletized unit loads.

The sample unit shall be one palletized unit load, fully packaged.

The Inspection level shall be S-1 and the AQL, expressed in terms of defects per hundred units, shall be 6.5.

Examine Defect

Finished Length, width or height exceeds Dimensions specified maximum requirement.

Palleti- Pallet pattern not as specified.

zation Interlocking of loads not as specified. Load not bonded with required straps as specified.

Weight Exceeds maximum load limits.

Marking Omitted; incorrect; illegible;

of improper size, location, sequence or method of appli-cation.